Matching Items (129)
Description
Ordered mesoporous materials have tunable pore sizes between 2 and 50 nm and are characterized by ordered pore structures and high surface areas (~1000 m2/g). This makes them particularly favorable for a number of membrane applications such as protein separation, polymer extrusion, nanowire fabrication and membrane reactors. These membranes can be fabricated as top-layers on macroporous supports or as embedded membranes in a dense matrix. The first part of the work deals with the hydrothermal synthesis and water-vapor/oxygen separation properties of supported MCM-48 and a new Al-MCM-48 type membrane for potential use in air conditioning systems. Knudsen-type permeation is observed in these membranes. The combined effect of capillary condensation and the aluminosilicate matrix resulted in the highest separation factor (142) in Al-MCM-48 membranes, with a water vapor permeance of 6×10-8mol/m2Pas. The second part focuses on synthesis of embedded mesoporous silica membranes with helically ordered pores by a novel Counter Diffusion Self-Assembly (CDSA) method. This method is an extension of the interfacial synthesis method for fiber synthesis using tetrabutylorthosilicate (TBOS) and cetyltrimethylammonium bromide (CTAB) as the silica source and surfactant respectively. The initial part of this study determined the effect of TBOS height and humidity on fiber formation. From this study, the range of TBOS heights for best microscopic and macroscopic ordering were established. Next, the CDSA method was used to successfully synthesize membranes, which were characterized to have good support plugging and an ordered pore structure. Factors that influence membrane synthesis and plug microstructure were determined. SEM studies revealed the presence of gaps between the plugs and support pores, which occur due to shrinking of the plug on drying. Development of a novel liquid deposition method to seal these defects constituted the last part of this work. Post sealing, excess silica was removed by etching with hydrofluoric acid. Membrane quality was evaluated at each step using SEM and gas permeation measurements. After surfactant removal by liquid extraction, the membranes exhibited an O2 permeance of 1.65x10-6mol/m2.Pa.s and He/O2 selectivity of 3.30. The successful synthesis of this membrane is an exciting new development in the area of ordered mesoporous membrane technology.
ContributorsSeshadri, Shriya (Author) / Lin, Jerry Y. S. (Thesis advisor) / Dai, Lenore (Committee member) / Rege, Kaushal (Committee member) / Smith, David J. (Committee member) / Vogt, Bryan (Committee member) / Arizona State University (Publisher)
Created2011
Description
III-nitride alloys are wide band gap semiconductors with a broad range of applications in optoelectronic devices such as light emitting diodes and laser diodes. Indium gallium nitride light emitting diodes have been successfully produced over the past decade. But the progress of green emission light emitting devices has been limited by the incorporation of indium in the alloy, mainly due to phase separation. This difficulty could be addressed by studying the growth and thermodynamics of these alloys. Knowledge of thermodynamic phase stabilities and of pressure - temperature - composition phase diagrams is important for an understanding of the boundary conditions of a variety of growth techniques. In this dissertation a study of the phase separation of indium gallium nitride is conducted using a regular solution model of the ternary alloy system. Graphs of Gibbs free energy of mixing were produced for a range of temperatures. Binodal and spinodal decomposition curves show the stable and unstable regions of the alloy in equilibrium. The growth of gallium nitride and indium gallium nitride was attempted by the reaction of molten gallium - indium alloy with ammonia at atmospheric pressure. Characterization by X-ray diffraction, photoluminescence, and secondary electron microscopy show that the samples produced by this method contain only gallium nitride in the hexagonal phase. The instability of indium nitride at the temperatures required for activation of ammonia accounts for these results. The photoluminescence spectra show a correlation between the intensity of a broad green emission, related to native defects, and indium composition used in the molten alloy. A different growth method was used to grow two columnar-structured gallium nitride films using ammonium chloride and gallium as reactants and nitrogen and ammonia as carrier gasses. Investigation by X-ray diffraction and spatially-resolved cathodoluminescence shows the film grown at higher temperature to be primarily hexagonal with small quantities of cubic crystallites, while the one grown at lower temperature to be pure hexagonal. This was also confirmed by low temperature photoluminescence measurements. The results presented here show that cubic and hexagonal crystallites can coexist, with the cubic phase having a much sharper and stronger luminescence. Controlled growth of the cubic phase GaN crystallites can be of use for high efficiency light detecting and emitting devices. The ammonolysis of a precursor was used to grow InGaN powders with different indium composition. High purity hexagonal GaN and InN were obtained. XRD spectra showed complete phase separation for samples with x < 30%, with ~ 9% indium incorporation in the 30% sample. The presence of InGaN in this sample was confirmed by PL measurements, where luminescence from both GaN and InGaN band edge are observed. The growth of higher indium compositions samples proved to be difficult, with only the presence of InN in the sample. Nonetheless, by controlling parameters like temperature and time may lead to successful growth of this III-nitride alloy by this method.
ContributorsHill, Arlinda (Author) / Ponce, Fernando A. (Thesis advisor) / Chamberlin, Ralph V (Committee member) / Sankey, Otto F (Committee member) / Smith, David J. (Committee member) / Tsen, Kong-Thon (Committee member) / Arizona State University (Publisher)
Created2011
Description
HgCdTe is the dominant material currently in use for infrared (IR) focal-plane-array (FPA) technology. In this dissertation, transmission electron microscopy (TEM) was used for the characterization of epitaxial HgCdTe epilayers and HgCdTe-based devices. The microstructure of CdTe surface passivation layers deposited either by hot-wall epitaxy (HWE) or molecular beam epitaxy (MBE) on HgCdTe heterostructures was evaluated. The as-deposited CdTe passivation layers were polycrystalline and columnar. The CdTe grains were larger and more irregular when deposited by HWE, whereas those deposited by MBE were generally well-textured with mostly vertical grain boundaries. Observations and measurements using several TEM techniques showed that the CdTe/HgCdTe interface became considerably more abrupt after annealing, and the crystallinity of the CdTe layer was also improved. The microstructure and compositional profiles of CdTe(211)B/ZnTe/Si(211) heterostructures grown by MBE was investigated. Many inclined {111}-type stacking faults were present throughout the thin ZnTe layer, terminating near the point of initiation of CdTe growth. A rotation angle of about 3.5° was observed between lattice planes of the Si substrate and the final CdTe epilayer. Lattice parameter measurement and elemental profiles indicated that some local intermixing of Zn and Cd had taken place. The average widths of the ZnTe layer and the (Cd, Zn)Te transition region were found to be roughly 6.5 nm and 3.5 nm, respectively. Initial observations of CdTe(211)B/GaAs(211) heterostructures indicated much reduced defect densities near the vicinity of the substrate and within the CdTe epilayers. HgCdTe epilayers grown on CdTe(211)B/GaAs(211) composite substrate were generally of high quality, despite the presence of precipitates at the HgCdTe/CdTe interface. The microstructure of HgCdSe thin films grown by MBE on ZnTe/Si(112) and GaSb(112) substrates were investigated. The quality of the HgCdSe growth was dependent on the growth temperature and materials flux, independent of the substrate. The materials grown at 100°C were generally of high quality, while those grown at 140°C had {111}-type stacking defects and high dislocation densities. For epitaxial growth of HgCdSe on GaSb substrates, better preparation of the GaSb buffer layer will be essential in order to ensure that high-quality HgCdSe can be grown.
ContributorsZhao, Wenfeng (Author) / Smith, David J. (Thesis advisor) / McCartney, Martha (Committee member) / Carpenter, Ray (Committee member) / Bennett, Peter (Committee member) / Treacy, Michael J. (Committee member) / Arizona State University (Publisher)
Created2011
Description
In contemporary U.S. culture, dance is often confined to the young and the trained, isolated on stages and in dance studios, and viewed as entertainment that is disconnected from "real life." Socially engaged dance practices re-connect dance to society in meaningful ways. By connecting individuals to their own bodies, to each other, to ideas, and to social, civic, and educational institutions, socially engaged dance practices use movement, the body, and the tools of participatory art, which contributes to the development of a democratic society, while catalyzing social change, and building healthy communities.
ContributorsJohnson, Elizabeth (Author) / Fitzgerald, Mary (Thesis advisor) / Standley, Eileen (Committee member) / Marshall, Alison (Committee member) / Arizona State University (Publisher)
Created2013
Description
Embodied Continuity documents the methodology of Entangled/Embraced, a dance performance piece presented December, 2011 and created as an artistic translation of research conducted January-May, 2011 in the states of Karnataka and Kerala, South India. Focused on the sciences of Ayurveda, Kalaripayattu and yoga, this research stems from an interest in body-mind connectivity, body-mind-environment continuity, embodied epistemology and the implications of ethnography within artistic practice. The document begins with a theoretical grounding covering established research on theories of embodiment; ethnographic methodologies framing research conducted in South India including sensory ethnography, performance ethnography and autoethnography; and an explanation of the sciences of Ayurveda, Kalaripayattu and yoga with a descriptive slant that emphasizes concepts of embodiment and body-mind-environment continuity uniquely inherent to these sciences. Following the theoretical grounding, the document provides an account of methods used in translating theoretical concepts and experiences emerging from research in India into the creation of the Entangled/Embraced dance work. Using dancer and audience member participation to inspire emergent meanings and maintain ethnographic consciousness, Embodied Continuity demonstrates how concepts inspiring research interests, along with ideas emerging from within research experiences, in addition to philosophical standpoints embedded in the ethnographic methodologies chosen to conduct research, weave into the entire project of Entangled/Embraced to unite the phases of research and performance, ethnography and artistry.
ContributorsRamsey, Ashlee (Author) / Vissicaro, Pegge (Thesis advisor) / Standley, Eileen (Committee member) / Dove, Simon (Committee member) / Arizona State University (Publisher)
Created2012
Description
Educed Play is a performance installation that investigates spontaneity and the invisible communication that can exist in improvisation and collaborative play. The work unites the mediums of dance, drawing, music, and video through improvisational performances. The multimedia installation entitled Educed Play was presented in the fall of 2012. Inspiration came from the idea of relics created by ephemeral interactions, using improvisation as a means to performance, and working within a genuine collaboration. This document encompasses an overview of the project.
ContributorsLing, Amanda (Author) / Kaplan, Robert (Thesis advisor) / Standley, Eileen (Committee member) / Pittsley, Janice (Committee member) / Arizona State University (Publisher)
Created2013
Description
This document serves as a discussion of and reflection on the collaborative process of rehearsing and performing arrive, create: a Dance made by Many. My intention for the work was to deconstruct the traditional performance paradigm, focusing on constructing a generous performance atmosphere. During the rehearsal process the cast collectively worked to develop an ensemble dynamic for improvisational dance making. The construct of the performance encouraged the audience to engage with the work, both physically and imaginatively through sensory interaction with objects as well as verbal conversation. This document: recalls my background in dance improvisation; explores the relationship of philosophical and dance-making practices; discusses the process of making and performing the work; discusses research data collected from participants; and reflects on the project as a whole. Topics explored include: phenomenological perspectives, ethics of care, "moving identity", dancers' sense of authorship, transparency of dance work, collaboration, dance filmmaking, and dance improvisation in performance.
ContributorsWall-MacLane, Laurel (Author) / Standley, Eileen (Thesis advisor) / Fitzgerald, Mary (Committee member) / Etheridge Woodson, Stephani (Committee member) / Arizona State University (Publisher)
Created2013
Description
HgCdTe is currently the dominant material for infrared sensing and imaging, and is usually grown on lattice-matched bulk CdZnTe (CZT) substrates. There have been significant recent efforts to identify alternative substrates to CZT as well as alternative detector materials to HgCdTe. In this dissertation research, a wide range of transmission electron microscopy (TEM) imaging and analytical techniques was used in the characterization of epitaxial HgCdTe and related materials and substrates for third generation IR detectors. ZnTe layers grown on Si substrates are considered to be promising candidates for lattice-matched, large-area, and low-cost composite substrates for deposition of II-VI and III-V compound semiconductors with lattice constants near 6.1 Å. After optimizing MBE growth conditions including substrate pretreatment prior to film growth, as well as nucleation and growth temperatures, thick ZnTe/Si films with high crystallinity, low defect density, and excellent surface morphology were achieved. Changes in the Zn/Te flux ratio used during growth were also investigated. Small-probe microanalysis confirmed that a small amount of As was present at the ZnTe/Si interface. A microstructural study of HgCdTe/CdTe/GaAs (211)B and CdTe/GaAs (211)B heterostructures grown using MBE was carried out. High quality MBE-grown CdTe on GaAs(211)B substrates was demonstrated to be a viable composite substrate platform for HgCdTe growth. In addition, analysis of interfacial misfit dislocations and residual strain showed that the CdTe/GaAs interface was fully relaxed. In the case of HgCdTe/CdTe/ GaAs(211)B, thin HgTe buffer layers between HgCdTe and CdTe were also investigated for improving the HgCdTe crystal quality. A set of ZnTe layers epitaxially grown on GaSb(211)B substrates using MBE was studied using high resolution X-ray diffraction (HRXRD) measurements and TEM characterization in order to investigate conditions for defect-free growth. HRXRD results gave critical thickness estimates between 350 nm and 375 nm, in good agreement with theoretical predictions. Moreover, TEM results confirmed that ZnTe layers with thicknesses of 350 nm had highly coherent interfaces and very low dislocation densities, unlike samples with the thicker ZnTe layers.
ContributorsKim, Jae Jin (Author) / Smith, David J. (Thesis advisor) / McCartney, Martha R. (Committee member) / Alford, Terry L. (Committee member) / Crozier, Peter A. (Committee member) / Arizona State University (Publisher)
Created2012
Description
The integration of yoga into the music curriculum has the potential of offering many immediate and life-long benefits to musicians. Yoga can help address issues such as performance anxiety and musculoskeletal problems, and enhance focus and awareness during musical practice and performance. Although the philosophy of yoga has many similarities to the process of learning a musical instrument, the benefits of yoga for musicians is a topic that has gained attention only recently. This document explores several ways in which the practice and philosophy of yoga can be fused with saxophone pedagogy as one way to prepare students for a healthy and successful musical career. A six-week study at Arizona State University was conducted to observe the effects of regular yoga practice on collegiate saxophone students. Nine participants attended a sixty-minute "yoga for musicians" class twice a week. Measures included pre- and post- study questionnaires as well as personal journals kept throughout the duration of the study. These self-reported results showed that yoga had positive effects on saxophone playing. It significantly increased physical comfort and positive thinking, and improved awareness of habitual patterns and breath control. Student participants responded positively to the idea of integrating such a course into the music curriculum. The integration of yoga and saxophone by qualified professionals could also be a natural part of studio class and individual instruction. Carrie Koffman, professor of saxophone at The Hartt School, University of Hartford, has established one strong model for the combination of these disciplines. Her methods and philosophy, together with the basics of Western-style hatha yoga, clinical reports on performance injuries, and qualitative data from the ASU study are explored. These inquiries form the foundation of a new model for integrating yoga practice regularly into the saxophone studio.
ContributorsAdams, Allison Dromgold (Author) / Norton, Kay (Thesis advisor) / Hill, Gary (Committee member) / McAllister, Timothy (Committee member) / Micklich, Albie (Committee member) / Standley, Eileen (Committee member) / Arizona State University (Publisher)
Created2012
Description
High electron mobility transistors (HEMTs) based on Group III-nitride heterostructures have been characterized by advanced electron microscopy methods including off-axis electron holography, nanoscale chemical analysis, and electrical measurements, as well as other techniques. The dissertation was organized primarily into three topical areas: (1) characterization of near-gate defects in electrically stressed AlGaN/GaN HEMTs, (2) microstructural and chemical analysis of the gate/buffer interface of AlN/GaN HEMTs, and (3) studies of the impact of laser-liftoff processing on AlGaN/GaN HEMTs. The electrical performance of stressed AlGaN/GaN HEMTs was measured and the devices binned accordingly. Source- and drain-side degraded, undegraded, and unstressed devices were then prepared via focused-ion-beam milling for examination. Defects in the near-gate region were identified and their correlation to electrical measurements analyzed. Increased gate leakage after electrical stressing is typically attributed to "V"-shaped defects at the gate edge. However, strong evidence was found for gate metal diffusion into the barrier layer as another contributing factor. AlN/GaN HEMTs grown on sapphire substrates were found to have high electrical performance which is attributed to the AlN barrier layer, and robust ohmic and gate contact processes. TEM analysis identified oxidation at the gate metal/AlN buffer layer interface. This thin a-oxide gate insulator was further characterized by energy-dispersive x-ray spectroscopy and energy-filtered TEM. Attributed to this previously unidentified layer, high reverse gate bias up to −30 V was demonstrated and drain-induced gate leakage was suppressed to values of less than 10−6 A/mm. In addition, extrinsic gm and ft * LG were improved to the highest reported values for AlN/GaN HEMTs fabricated on sapphire substrates. Laser-liftoff (LLO) processing was used to separate the active layers from sapphire substrates for several GaN-based HEMT devices, including AlGaN/GaN and InAlN/GaN heterostructures. Warpage of the LLO samples resulted from relaxation of the as-grown strain and strain arising from dielectric and metal depositions, and this strain was quantified by both Newton's rings and Raman spectroscopy methods. TEM analysis demonstrated that the LLO processing produced no detrimental effects on the quality of the epitaxial layers. TEM micrographs showed no evidence of either damage to the ~2 μm GaN epilayer generated threading defects.
ContributorsJohnson, Michael R. (Author) / Mccartney, Martha R (Thesis advisor) / Smith, David J. (Committee member) / Goodnick, Stephen (Committee member) / Shumway, John (Committee member) / Chen, Tingyong (Committee member) / Arizona State University (Publisher)
Created2012