Matching Items (410)
Filtering by
- Creators: Ira A. Fulton Schools of Engineering
- Resource Type: Text
Description
High phase order systems have been proposed at the early inception of power transmission engineering, but few direct applications have been made. High phase order transmission should be considered as an alternative in the case of high power density applications. In this article, an analysis of transposition of high phase order overhead transmission lines is presented and voltage unbalance in high phase order systems is considered. Definitions are presented for “fully transposed” and “roll transposed” along with advantages and disadvantages of each. A generalized voltage unbalance factor is introduced and utilized to determine the benefits of transposition. The generalized voltage unbalance factor is compared with three other possible unbalance factors to determine if the generalized voltage unbalance factor is an appropriate indication of unbalance. Exemplary results are presented for 6-phase and 12-phase designs. Conclusions show that the generalized voltage unbalance factor is a good indication of transmission line voltage unbalance and certain configurations may not need full rotation transposition to minimize the unbalance factor. The transposition analysis and voltage unbalance are considerations in the assessment of high phase order as a high power transmission alternative.
ContributorsPierre, Brian (Author) / Heydt, Gerald (Author) / Ira A. Fulton Schools of Engineering (Contributor) / School for the Engineering of Matter, Transport and Energy (Contributor)
Created2014-11-18
Description
The increase of transmission line thermal ratings by reconductoring with high temperature low sag conductors is a comparatively new technology introduced for transmission expansion. A special design permits high temperature low sag conductors to operate at higher temperatures, therefore allowing passage of higher current and, thus, increasing the thermal rating of the transmission line. The comparatively high cost of high temperature low sag conductors may be an obstacle to its large-scale implementation. This article evaluates the expenditures for transmission line reconductoring using high temperature low sag, the consequent benefits obtained from the potential decrease in operating cost for thermally limited power transmission systems. Estimates of the “payback period” are used to evaluate the cost effectiveness of reconductoring with high temperature low sag. The evaluation is performed using a 225 bus equivalent of the 2012 summer peak Arizona portion of the Western Electricity Coordinating Council. The method is offered for transmission expansion analysis in which an economic benefit is calculated to assist in the transmission expansion decision.
ContributorsTokombayev, Askhat (Author) / Heydt, Gerald (Author) / Ira A. Fulton Schools of Engineering (Contributor) / School of Electrical, Computer and Energy Engineering (Contributor)
Created2015-02-07
Description
Eigenvalues of the 3D critical point equation (∇u)ν = λν are normally computed numerically. In the letter, we present analytic solutions for 3D swirling strength in both compressible and incompressible flows. The solutions expose functional dependencies that cannot be seen in numerical solutions. To illustrate, we study the difference between using fluctuating and total velocity gradient tensors for vortex identification. Results show that mean shear influences vortex detection and that distortion can occur, depending on the strength of mean shear relative to the vorticity at the vortex center.
ContributorsChen, Huai (Author) / Adrian, Ronald (Author) / Zhong, Qiang (Author) / Wang, Xingkui (Author) / Ira A. Fulton Schools of Engineering (Contributor) / School for the Engineering of Matter, Transport and Energy (Contributor)
Created2014-08-01
Description
The flexural behavior of epoxies was investigated by performing mechanical tests and applying statistical Weibull theory and analytical methods to the results. The effects of loading systems and environmental conditions were also considered. Three kinds of epoxies were studied: Epon E863, PRI 2002, and PR520. In total, 53 three-point-bending (3PB) Epon E863 samples and 26 3PB PR520 were tested immediately after curing, together with 26 four-point-bending (4PB) PRI2002 samples stored at 60°C and 90% Rh for 48 weeks. The Weibull parameters were estimated using both linear regression and the moments method. The statistical character of the Weibull model leads to uncertainty in the evaluated parameters, even for a large number of experiments. This study analyzed the ratio of flexural strength to tensile strength in bulk epoxy resin polymers. An analytical method previously developed by the authors to study the relationship between uniaxial tension/compression stress-strain curves and flexural load-deflection response was used to obtain the ratio. The results show that the Weibull model overpredicted the aforementioned ratio in different load arrangements.
ContributorsYekani Fard, Masoud (Author) / Raji, B. (Author) / Chattopadhyay, Aditi (Author) / Ira A. Fulton Schools of Engineering (Contributor) / School for the Engineering of Matter, Transport and Energy (Contributor)
Created2014-12-01
Description
Identification of early damage in polymer composites is of great importance. We have incorporated cyclobutane-containing cross-linked polymers into an epoxy matrix, studied the effect on thermal and mechanical properties, and, more importantly, demonstrated early damage detection through mechanically induced fluorescence generation. Two cinnamate derivatives, 1,1,1-tris(cinnamoyloxymethyl) ethane (TCE) and poly(vinyl cinnamate) (PVCi), were photoirradiated to produce cyclobutane-containing polymer. The effects on the thermal and mechanical properties with the addition of cyclobutane-containing polymer into epoxy matrix were investigated. The emergence of cracks was detected by fluorescence at a strain level just beyond the yield point of the polymer blends, and the fluorescence intensified with accumulation of strain. Overall, the results show that damage can be detected through fluorescence generation along crack propagation.
ContributorsZou, Jin (Author) / Liu, Yingtao (Author) / Shan, Bohan (Author) / Chattopadhyay, Aditi (Author) / Dai, Lenore (Author) / Ira A. Fulton Schools of Engineering (Contributor) / School for the Engineering of Matter, Transport and Energy (Contributor)
Created2014-09-01
Description
The impact of increasing penetration of converter control-based generators (CCBGs) in a large-scale power system is assessed through a model based small signal stability analysis. Three test bed cases for the years 2010, 2020, and 2022 of the Western Electricity Coordinating Council (WECC) in the United States are used for the analysis. Increasing penetration of wind-based Type 3 and wind-based Type 4 and PV Solar CCBGs is used in the tests. The participation and interaction of CCBGs and synchronous generators in traditional electromechanical interarea modes is analyzed. Two new types of modes dominated by CCBGs are identified. The characteristics of these new modes are described and compared to electromechanical modes in the frequency domain. An examination of the mechanism of the interaction between the CCBG control states and the synchronous generator control states is presented and validated through dynamic simulations. Actual system and forecast load data are used throughout.
ContributorsQuintero, Jaime (Author) / Vittal, Vijay (Author) / Heydt, Gerald (Author) / Zhang, Hui (Author) / Ira A. Fulton Schools of Engineering (Contributor) / School of Electrical, Computer and Energy Engineering (Contributor)
Created2014-09-01
Description
The Physics and Chemistry of Surfaces and Interfaces conference has maintained a focus on the interfacial and surface properties of materials since its initiation in 1974. The conference continues to be a major force in this field, bringing together scientists from a variety of disciplines to focus upon the science of interfaces and surfaces. Here, a historical view of the development of the conference and a discussion of some of the themes that have been focal points for many years are presented.
ContributorsFerry, David (Author) / Ira A. Fulton Schools of Engineering (Contributor) / School of Electrical, Computer and Energy Engineering (Contributor)
Created2013
Description
Approximately 1% of the total working population within the United States bikes as their primary mode of commute. Due to recent increased in bicycle facilities as well as a focus on alternative modes of transport, understanding the motivations and type of people who bike to work is important in order to encourage new users.
In this project, a literature review was completed as well as data analysis of the National Household Travel Survey (NHTS) in order to find specific populations to target. Using these target populations, it is suggested that advertising and workplace encouragement occur to persuade more people to bike to work. Through data analysis it was found that the most impactful variables were the region of the country, gender, population density, and commute distance. Bicycle commuters statistically had fewer vehicles in their households and drove less miles annually.
There were five main target groups found through this analysis; people who bike for other reasons besides work and live in a city with more than 4,000 people per square mile, young professionals between 19-39, women in regions with separated bicycle facilities, those with low vehicle availability, and environmentally conscious individuals. Working to target these groups through advertising campaigns to encourage new users, as well as increasing and improving bicycle facilities, will help create more new bicyclists.
In this project, a literature review was completed as well as data analysis of the National Household Travel Survey (NHTS) in order to find specific populations to target. Using these target populations, it is suggested that advertising and workplace encouragement occur to persuade more people to bike to work. Through data analysis it was found that the most impactful variables were the region of the country, gender, population density, and commute distance. Bicycle commuters statistically had fewer vehicles in their households and drove less miles annually.
There were five main target groups found through this analysis; people who bike for other reasons besides work and live in a city with more than 4,000 people per square mile, young professionals between 19-39, women in regions with separated bicycle facilities, those with low vehicle availability, and environmentally conscious individuals. Working to target these groups through advertising campaigns to encourage new users, as well as increasing and improving bicycle facilities, will help create more new bicyclists.
ContributorsImbus, Eileen Elizabeth (Author) / Khoeini, Sara (Thesis director) / Pendyala, Ram (Committee member) / Civil, Environmental and Sustainable Eng Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The objective of this research paper is to analyze and determine the relationships between childhood and adulthood transit behavior. The study investigates gender differences for each generation regarding childhood transit experiences. Childhood travel socialization was studied to understand its effects on childhood transit experience and perception. Lastly, childhood transit experience and perception were analyzed to determine their effect on adult transit usage. The variables the study analyzed were childhood peer impression of public transit, parental opinion of the safety of public transit, and the respondents’ childhood public transit experience. These variables were investigated to determine if they had an effect on adult use of public transit. The survey Transit Center’s Who’s On Board: 2014 Mobility Attitudes Survey (WOBMAS) was used to perform these analyses. The results showed that gender equality appears to be increasing in younger generations with respect to their ability to travel alone on public transit. In addition, men were more likely to travel by themselves on public transit when compared to women. There is a direct correlation between childhood travel socialization and childhood transit experience and opinion. However, there appears to be no correlation between childhood travel socialization and a child’s likeliness to travel on public transit alone. Childhood travel socialization had a counterintuitive effect on adult transit usage. On the contrary, it appears that childhood experience is significantly linked to adult transit usage. The data suggests that the earlier a person travels on public transit alone, the more likely they are to ride it as an adult.
ContributorsCharles, Allison (Author) / Pendyala, Ram (Thesis director) / Thompson, Marilyn (Committee member) / Civil, Environmental and Sustainable Eng Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Motorcycle fatalities have been increasing at a faster rate than the number of motorcycles being registered in the United States. There is limited analysis on the causes of fatal motorcycle crashes, specifically regarding different demographics, certain driver behavior, and various crash characteristics. It is important to be aware of how these factors relate to each other during a fatal motorcycle crash. This analysis focuses on these factors and explores potential steps to decrease motorcycle fatality rates using research and data from the Fatality Analysis Reporting System (FARS) from the National Highway Traffic Safety Administration (NHTSA), and data from the National Household Travel Survey (NHTS). Based on this data, there are noticeable trends between different genders and age groups. According to the analysis, males have a higher fatality rate than females, and their fatal crashes tend to involve multiple driver infractions such as drinking, speeding, not wearing a helmet, and driving without a license. Similarly, younger drivers have a higher fatality rate than older drivers, and their fatal crashes tend to involve multiple driver infractions. Although older drivers involved in fatal crashes usually drive more cautiously, they tend to be involved in single-vehicle crashes more often than younger drivers. Moving forward, implementing certain training programs directed towards particular demographics has the potential to decrease motorcycle rider fatalities.
ContributorsMoran, Sarah Elizabeth (Co-author) / Santilli, Amy (Co-author) / Pendyala, Ram (Thesis director) / Khoeini, Sara (Committee member) / Industrial, Systems & Operations Engineering Prgm (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05