Matching Items (380)
Description
III-nitride alloys are wide band gap semiconductors with a broad range of applications in optoelectronic devices such as light emitting diodes and laser diodes. Indium gallium nitride light emitting diodes have been successfully produced over the past decade. But the progress of green emission light emitting devices has been limited by the incorporation of indium in the alloy, mainly due to phase separation. This difficulty could be addressed by studying the growth and thermodynamics of these alloys. Knowledge of thermodynamic phase stabilities and of pressure - temperature - composition phase diagrams is important for an understanding of the boundary conditions of a variety of growth techniques. In this dissertation a study of the phase separation of indium gallium nitride is conducted using a regular solution model of the ternary alloy system. Graphs of Gibbs free energy of mixing were produced for a range of temperatures. Binodal and spinodal decomposition curves show the stable and unstable regions of the alloy in equilibrium. The growth of gallium nitride and indium gallium nitride was attempted by the reaction of molten gallium - indium alloy with ammonia at atmospheric pressure. Characterization by X-ray diffraction, photoluminescence, and secondary electron microscopy show that the samples produced by this method contain only gallium nitride in the hexagonal phase. The instability of indium nitride at the temperatures required for activation of ammonia accounts for these results. The photoluminescence spectra show a correlation between the intensity of a broad green emission, related to native defects, and indium composition used in the molten alloy. A different growth method was used to grow two columnar-structured gallium nitride films using ammonium chloride and gallium as reactants and nitrogen and ammonia as carrier gasses. Investigation by X-ray diffraction and spatially-resolved cathodoluminescence shows the film grown at higher temperature to be primarily hexagonal with small quantities of cubic crystallites, while the one grown at lower temperature to be pure hexagonal. This was also confirmed by low temperature photoluminescence measurements. The results presented here show that cubic and hexagonal crystallites can coexist, with the cubic phase having a much sharper and stronger luminescence. Controlled growth of the cubic phase GaN crystallites can be of use for high efficiency light detecting and emitting devices. The ammonolysis of a precursor was used to grow InGaN powders with different indium composition. High purity hexagonal GaN and InN were obtained. XRD spectra showed complete phase separation for samples with x < 30%, with ~ 9% indium incorporation in the 30% sample. The presence of InGaN in this sample was confirmed by PL measurements, where luminescence from both GaN and InGaN band edge are observed. The growth of higher indium compositions samples proved to be difficult, with only the presence of InN in the sample. Nonetheless, by controlling parameters like temperature and time may lead to successful growth of this III-nitride alloy by this method.
ContributorsHill, Arlinda (Author) / Ponce, Fernando A. (Thesis advisor) / Chamberlin, Ralph V (Committee member) / Sankey, Otto F (Committee member) / Smith, David J. (Committee member) / Tsen, Kong-Thon (Committee member) / Arizona State University (Publisher)
Created2011
Description
Surveys have shown that several hundred billion weather forecasts are obtained by the United States public each year, and that weather news is one of the most consumed topics in the media. This indicates that the forecast provides information that is significant to the public, and that the public utilizes details associated with it to inform aspects of their life. Phoenix, Arizona is a dry, desert region that experiences a monsoon season and extreme heat. How then, does the weather forecast influence the way Phoenix residents make decisions? This paper aims to draw connections between the weather forecast, decision making, and people who live in a desert environment. To do this, a ten-minute survey was deployed through Amazon Mechanical Turk (MTurk) in which 379 respondents were targeted. The survey asks 45 multiple choice and ranking questions categorized into four sections: obtainment of the forecast, forecast variables of interest, informed decision making based on unique weather variables, and demographics. This research illuminates how residents in the Phoenix metropolitan area use the local weather forecast for decision-making on daily activities, and the main meteorological factors that drive those decisions.
ContributorsMarturano, Julia (Author) / Middel, Ariane (Thesis director) / Schneider, Florian (Committee member) / School of Geographical Sciences and Urban Planning (Contributor, Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
Hispanic youth have the highest risk for obesity, making this population a key priority for early childhood interventions to prevent the development of adult obesity and its consequences. Involving parents in these interventions is essential to support positive long-term physical activity and nutrition habits. Interventions in the past have engaged parents by providing information about nutrition and fruit and vegetable intake through written materials or text such as newsletters and text messages. The Sustainability via Active Garden Education (SAGE) intervention used gardening and interactive activities to teach preschool children ages 3-5 about healthy eating and physical activity. It aimed to increase physical activity and fruit and vegetable intake in preschool children as well as improve related parenting practices. The intervention utilized newsletters to engage parents by promoting opportunities to increase physical activity and fruit and vegetable intake for their children at home. The newsletters also encouraged parents to discuss what was learned during the SAGE lessons with their children. The purpose of this paper is to describe the content of the newsletters and determine the parent perception of the newsletters through parent survey responses. This can help inform future childhood obesity interventions and parent engagement.
ContributorsVi, Vinny (Author) / Lee, Rebecca (Thesis director) / Martinelli, Sarah (Committee member) / Edson College of Nursing and Health Innovation (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
Raman scattering from Ge-Si core-shell nanowires is investigated theoretically and experimentally. A theoretical model that makes it possible to extract quantitative strain information from the measured Raman spectra is presented for the first time. Geometrical and elastic simplifications are introduced to keep the model analytical, which facilitates comparison with experimental results. In particular, the nanowires are assumed to be cylindrical, and their elastic constants isotropic. The simple analytical model is subsequently validated by performing numerical calculations using realistic nanowire geometries and cubic, anisotropic elastic constants. The comparison confirms that the analytic model is an excellent approximation that greatly facilitates quantitative Raman work, with expected errors in the strain determination that do not exceed 10%. Experimental Raman spectra of a variety of core-shell nanowires are presented, and the strain in the nanowires is assessed using the models described above. It is found that all structures present a significant degree of strain relaxation relative to ideal, fully strained Ge-Si core-shell structures. The analytical models are modified to quantify this strain relaxation.
ContributorsSingh, Rachna (Author) / Menéndez, Jose (Thesis advisor) / Drucker, Jeffery (Committee member) / Ponce, Fernando (Committee member) / Tsen, Kong-Thon (Committee member) / Bennett, Peter (Committee member) / Arizona State University (Publisher)
Created2011
Description
Group III-nitride semiconductors have attracted much attention for applications on high brightness light-emitting diodes (LEDs) and laser diodes (LDs) operating in the visible and ultra-violet spectral range using indium gallium nitride in the active layer. However, the device efficiency in the green to red range is limited by quantum-confined Stark effects resulting from the lattice mismatch between GaN and InGaN. In this dissertation, the optical and micro-structural properties of GaN-based light emitting structures have been analyzed and correlated by utilizing cathodoluminescence and transmission electron microscopy techniques. In the first section, optimization of the design of GaN-based lasers diode structures is presented. The thermal strain present in the GaN underlayer grown on sapphire substrates causes a strain-induced wavelength shift. The insertion of an InGaN waveguide mitigates the mismatch strain at the interface between the InGaN quantum well and the GaN quantum barrier. The second section of the thesis presents a study of the characteristics of thick non-polar m-plane InGaN films and of LED structures containing InGaN quantum wells, which minimize polarization-related electric fields. It is found that in some cases the in-plane piezoelectric fields can still occur due to the existence of misfit dislocations which break the continuity of the film. In the final section, the optical and structural properties of InGaAlN quaternary alloys are analyzed and correlated. The composition of the components of the film is accurately determined by Rutherford backscattering spectroscopy.
ContributorsHuang, Yu (Author) / Ponce, Fernando A. (Thesis advisor) / Tsen, Kong-Thon (Committee member) / Treacy, Michael (Committee member) / Drucker, Jeffery (Committee member) / Culbertson, Robert (Committee member) / Arizona State University (Publisher)
Created2011
Raman spectroscopy characterization of anharmonicity and alloying effects in semiconductor materials
Description
The chemical sensitivity and spatial resolution of Raman spectroscopy, combined with the sensitivity of modern systems that can easily detect single atomic layers, have made this technique a preferred choice for the strain characterization of complex systems such as nanoscale complementary metal-oxide-semiconductor - CMOS - devices. A disadvantage of Raman spectroscopy, however, is that the shifts associated with strain are not related to the geometrical deformations in any obvious way, so that careful calibrations are needed to determine the anharmonic coefficients (p, q and r) that relate strain to Raman shifts. A new set of measurements of the Raman shift in strained Ge films grown on relaxed SiGe buffer layers deposited on Si substrates is presented, and thereby, a new consistent set of values for the parameters p and q for Ge has been proposed. In this dissertation the study of the vibrational properties of Ge1-xSnx alloys has also been reported. The temperature dependence of the Raman spectrum of Ge-rich Ge1-x Snx and Ge1-x-ySi xSny alloys has been determined in the 10 K - 450 K range. The Raman line shift and width changes as a function of temperature are found to be virtually identical to those observed in bulk Ge. This result shows that the anharmonic decay process responsible for the temperature dependence is extremely robust against the alloy perturbation.
ContributorsBagchi, Sampriti (Author) / Menéndez, Jose (Thesis advisor) / Treacy, Michael (Committee member) / Ponce, Fernando (Committee member) / Tsen, Kong-Thon (Committee member) / Rez, Peter (Committee member) / Arizona State University (Publisher)
Created2011
Description
Group III-nitride semiconductors have wide application in optoelectronic devices. Spontaneous and piezoelectric polarization effects have been found to be critical for electric and optical properties of group III-nitrides. In this dissertation, firstly, the crystal orientation dependence of the polarization is calculated and in-plane polarization is revealed. The in-plane polarization is sensitive to the lateral characteristic dimension determined by the microstructure. Specific semi-polar plane growth is suggested for reducing quantum-confined Stark effect. The macroscopic electrostatic field from the polarization discontinuity in the heterostructures is discussed, b ased on that, the band diagram of InGaN/GaN quantum well/barrier and AlGaN/GaN heterojunction is obtained from the self-consistent solution of Schrodinger and Poisson equations. New device design such as triangular quantum well with the quenched polarization field is proposed. Electron holography in the transmission electron microscopy is used to examine the electrostatic potential under polarization effects. The measured potential energy profiles of heterostructure are compared with the band simulation, and evidences of two-dimensional hole gas (2DHG) in a wurtzite AlGaN/ AlN/ GaN superlattice, as well as quasi two-dimensional electron gas (2DEG) in a zinc-blende AlGaN/GaN are found. The large polarization discontinuity of AlN/GaN is the main source of the 2DHG of wurtzite nitrides, while the impurity introduced during the growth of AlGaN layer provides the donor states that to a great extent balance the free electrons in zinc-blende nitrides. It is also found that the quasi-2DEG concentration in zinc-blende AlGaN/GaN is about one order of magnitude lower than the wurtzite AlGaN/GaN, due to the absence of polarization. Finally, the InAlN/GaN lattice-matched epitaxy, which ideally has a zero piezoelectric polarization and strong spontaneous polarization, is experimentally studied. The breakdown in compositional homogeneity is triggered by threading dislocations with a screw component propagating from the GaN underlayer, which tend to open up into V-grooves at a certain thickness of the InxAl1-xN layer. The V-grooves coalesce at 200 nm and are filled with material that exhibits a significant drop in indium content and a broad luminescence peak. The structural breakdown is due to heterogeneous nucleation and growth at the facets of the V-grooves.
ContributorsWei, Qiyuan (Author) / Ponce, Fernando A. (Thesis advisor) / Tsen, Kong-Thon (Committee member) / Shumway, John (Committee member) / Menéndez, Jose (Committee member) / Smith, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
Some of the most talented, innovative, and experimental artists are students, but they are often discouraged by the price of higher education and lack of scholarship or funding opportunities. Additionally, the art industry has become stagnant. Traditional brick-and-mortar galleries are not willing to represent young, unknown artists. Their overhead is simply too high for risky choices.
The Student Art Project is art patronage for the 21st century—a curated online gallery featuring exceptional student artists. The Student Art Project is a highly curated experience for buyers. Only five artists are featured each month. Buyers are not bombarded with thousands of different products and separate artists “shops”. They can read artists bios and find art they connect with.
Student artists apply through an online form. Once accepted to the program, artists receive a $200 materials stipend to create an exclusive collection of 5-10 pieces. Original artwork and limited edition prints are sold through our website. These collections can potentially fund an entire year of college tuition, a life-changing amount for many students.
Brick-and-mortar galleries typically take 40-60% of the retail price of artwork. The Student Art Project will only take 30%, which we will use to reinvest in future artists. Other art websites, like Etsy, require the artists to ship, invoice, and communicate with customers. For students, this means less time spent in the classroom and less time developing their craft. The Student Art Project handles all business functions for our artists, allowing them to concentrate on what really matters, their education.
The Student Art Project is art patronage for the 21st century—a curated online gallery featuring exceptional student artists. The Student Art Project is a highly curated experience for buyers. Only five artists are featured each month. Buyers are not bombarded with thousands of different products and separate artists “shops”. They can read artists bios and find art they connect with.
Student artists apply through an online form. Once accepted to the program, artists receive a $200 materials stipend to create an exclusive collection of 5-10 pieces. Original artwork and limited edition prints are sold through our website. These collections can potentially fund an entire year of college tuition, a life-changing amount for many students.
Brick-and-mortar galleries typically take 40-60% of the retail price of artwork. The Student Art Project will only take 30%, which we will use to reinvest in future artists. Other art websites, like Etsy, require the artists to ship, invoice, and communicate with customers. For students, this means less time spent in the classroom and less time developing their craft. The Student Art Project handles all business functions for our artists, allowing them to concentrate on what really matters, their education.
ContributorsDangler, Rebecca Leigh (Author) / Trujillo, Rhett (Thesis director) / Coleman, Sean (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / Department of Management (Contributor)
Created2015-05
Description
Drought is one of the most pressing issues affecting the future of the standard of living here in Phoenix. With the threat of water rationing and steep price hikes looming on the horizon for water customers in California, the desert southwest, and in drought-stricken communities worldwide, industrial designers are in a prime position to help improve the experience of water conservation so that consumers are willing to start taking conscious steps toward rethinking their relationship with water usage.
In a research group, several designers sought to understand the depth and complexity of this highly politicized issue by interviewing a wide variety of stakeholders, including sustainability experts, landscapers, water company executives, small business owners, reservoir forest rangers, and many more. Data synthesis led to the conclusion that residential water use is a lifestyle issue, and the only real way to conserve involves a significant shift in the collective idea of an “ideal” home—lawns, pools, and overwatered landscaping contribute to 70% of all water use by residences in the Phoenix area. The only real way to conserve involves increasing population density and creating communal green spaces.
DR. DISH is a dishwashing device that is meant to fit into the high-density living spaces that are rapidly being built in the face of the massive exodus of people into the world’s cities. To help busy apartment and condominium dwellers conserve water and time, DR. DISH converts a standard kitchen sink into a small dishwasher, which uses significantly less water than hand-washing dishes or rinsing dishes before putting them into a conventional dishwasher. Using advanced filtration technology and a powerful rinse cycle, a load dishes can be cleaned with about 2 gallons of water. Fully automating the dishwashing process also saves the user time and minimizes unpleasant contact with food residue and grease.
This device is meant to have a significant impact upon the water use of households that do not have a dishwasher, or simply do not use their dishwasher. With a low target price point and myriad convenient features, DR. DISH is a high-tech solution that promises water savings at a time when every effort toward conservation is absolutely critical. As we move toward a new era in determining water rights and imposing mandatory restrictions upon each and every person living in affected areas, creating conservation solutions that will be relevant for the lifestyles of the future is especially important, and the agility of designers in coming up with products that quickly cut consumer water consumption will be a key factor in determining whether humanity will be able to adapt to a new era in our relationship with natural resources.
In a research group, several designers sought to understand the depth and complexity of this highly politicized issue by interviewing a wide variety of stakeholders, including sustainability experts, landscapers, water company executives, small business owners, reservoir forest rangers, and many more. Data synthesis led to the conclusion that residential water use is a lifestyle issue, and the only real way to conserve involves a significant shift in the collective idea of an “ideal” home—lawns, pools, and overwatered landscaping contribute to 70% of all water use by residences in the Phoenix area. The only real way to conserve involves increasing population density and creating communal green spaces.
DR. DISH is a dishwashing device that is meant to fit into the high-density living spaces that are rapidly being built in the face of the massive exodus of people into the world’s cities. To help busy apartment and condominium dwellers conserve water and time, DR. DISH converts a standard kitchen sink into a small dishwasher, which uses significantly less water than hand-washing dishes or rinsing dishes before putting them into a conventional dishwasher. Using advanced filtration technology and a powerful rinse cycle, a load dishes can be cleaned with about 2 gallons of water. Fully automating the dishwashing process also saves the user time and minimizes unpleasant contact with food residue and grease.
This device is meant to have a significant impact upon the water use of households that do not have a dishwasher, or simply do not use their dishwasher. With a low target price point and myriad convenient features, DR. DISH is a high-tech solution that promises water savings at a time when every effort toward conservation is absolutely critical. As we move toward a new era in determining water rights and imposing mandatory restrictions upon each and every person living in affected areas, creating conservation solutions that will be relevant for the lifestyles of the future is especially important, and the agility of designers in coming up with products that quickly cut consumer water consumption will be a key factor in determining whether humanity will be able to adapt to a new era in our relationship with natural resources.
ContributorsMarcinkowski, Margaret Nicole (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / The Design School (Contributor) / Herberger Institute for Design and the Arts (Contributor)
Created2015-05
Description
Fire Shelter Foam Assist is meant as a firefighter's last effort of survival when a wildfire threatens their position. When deployed, it will cover the firefighter as the fire blows over. By reducing the time of deployment and simplifying the process, firefighters will have more time to ensure the area around them is cleared. The Fire Shelter Foam Assist has features that allow it to auto deploy around the firefighter through the use of fire foam retardant. The fire foam retardant inflates the shelter as well as provides an extra layer of protection against the wildfire.
ContributorsSmith, Tori Elizabeth (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / The Design School (Contributor)
Created2015-05