Matching Items (303)
Description
An approach for modeling resistance spot welding of thin-gauge, dissimilar metal sheets with high electrical conductivity is presented in this work. In this scenario, the electrical and thermal contact resistances play a dominant role in heat generation and temperature evolution within the workpieces; these interactions ultimately control the weld geometry. Existing models are limited in modeling these interactions, especially for dissimilar and thin-gauge metal sheets, and at higher temperatures when the multiphysics becomes increasingly interdependent. The approach presented here uses resistivity measurements, combined with thermal modeling and known bulk resistance relationships to infer the relationship between electrical contact resistance and temperature for each of the different material interfaces in the welding process. Corresponding thermal contact resistance models are developed using the Wiedemann-Franz law combined with a scaling factor to account for nonmetallic behavior. Experimental and simulation voltage histories and final weld diameter were used to validate this model for a Cu/Al/Cu and a Cu/Al/Cu/Al/Cu stack-ups. This model was then used to study the effect of Ni-P coating on resistance spot welding of Cu and Al sheets in terms of weld formation, mechanical deformation, and contact resistance. Contact resistance and current density distribution are highly dependent on contact pressure and temperature distribution at the Cu/Al interface in the presence of alumina. The Ni-P coating helps evolve a partially-bonded donut shaped weld into a fully-bonded hourglass-shaped weld by decreasing the dependence of contact resistance and current density distribution on contact pressure and temperature distribution at the Cu/Al interface. This work also provides an approach to minimize distortion due to offset-rolling in thin aluminum sheets by optimizing the stiffening feature geometry. The distortion is minimized using particle swarm optimization. The objective function is a function of distortion and smallest radius of curvature in the geometry. Doubling the minimum allowable radius of curvature nearly doubles the reduction in distortion from the stadium shape for a quarter model. Reduction in distortion in the quarter model extends to the full-scale model with the best design performing 5.3% and 27% better than the corresponding nominal design for a quarter and full-scale model, respectively.
ContributorsVeeresh, Pawan (Author) / Oswald, Jay (Thesis advisor) / Carlson, Blair (Committee member) / Hoover, Christian (Committee member) / Rajagopalan, Jagannathan (Committee member) / Solanki, Kiran (Committee member) / Arizona State University (Publisher)
Created2022
Description
Building and optimizing a design for deformable media can be extremely costly. However, granular scaling laws enable the ability to predict system velocity and mobility
power consumption by testing at a smaller scale in the same environment. The validity of
the granular scaling laws for arbitrarily shaped wheels and screws were evaluated in
materials like silica sand and BP-1, a lunar simulant. Different wheel geometries, such as
non-grousered and straight and bihelically grousered wheels were created and tested
using 3D printed technologies. Using the granular scaling laws and the empirical data
from initial experiments, power and velocity were predicted for a larger scaled version
then experimentally validated on a dynamic mobility platform. Working with granular
media has high variability in material properties depending on initial environmental
conditions, so particular emphasis was placed on consistency in the testing methodology.
Through experiments, these scaling laws have been validated with defined use cases and
limitations.
ContributorsMcbryan, Teresa (Author) / Marvi, Hamidreza (Thesis advisor) / Berman, Spring (Committee member) / Lee, Hyunglae (Committee member) / Arizona State University (Publisher)
Created2022
Description
Electromigration, the net atomic diffusion associated with the momentum transfer from electrons moving through a material, is a major cause of device and component failure in microelectronics. The deleterious effects from electromigration rise with increased current density, a parameter that will only continue to increase as our electronic devices get smaller and more compact. Understanding the dynamic diffusional pathways and mechanisms of these electromigration-induced and propagated defects can further our attempts at mitigating these failure modes. This dissertation provides insight into the relationships between these defects and parameters of electric field strength, grain boundary misorientation, grain size, void size, eigenstrain, varied atomic mobilities, and microstructure.First, an existing phase-field model was modified to investigate the various defect modes associated with electromigration in an equiaxed non-columnar microstructure. Of specific interest was the effect of grain boundary misalignment with respect to current flow and the mechanisms responsible for the changes in defect kinetics. Grain size, magnitude of externally applied electric field, and the utilization of locally distinct atomic mobilities were other parameters investigated. Networks of randomly distributed grains, a common microstructure of interconnects, were simulated in both 2- and 3-dimensions displaying the effects of 3-D capillarity on diffusional dynamics.
Also, a numerical model was developed to study the effect of electromigration on void migration and coalescence. Void migration rates were found to be slowed from compressive forces and the nature of the deformation concurrent with migration was examined through the lens of chemical potential. Void migration was also validated with previously reported theoretical explanations. Void coalescence and void budding were investigated and found to be dependent on the magnitude of interfacial energy and electric field strength.
A grasp on the mechanistic pathways of electromigration-induced defect evolution is imperative to the development of reliable electronics, especially as electronic devices continue to miniaturize. This dissertation displays a working understanding of the mechanistic pathways interconnects can fail due to electromigration, as well as provide direction for future research and understanding.
ContributorsFarmer, William McHann (Author) / Ankit, Kumar (Thesis advisor) / Chawla, Nikhilesh (Committee member) / Jiao, Yang (Committee member) / McCue, Ian (Committee member) / Arizona State University (Publisher)
Created2022
Description
Chemical Reaction Networks (CRNs) provide a useful framework for modeling andcontrolling large numbers of agents that undergo stochastic transitions between a set of states
in a manner similar to chemical compounds. By utilizing CRN models to design agent control
policies, some of the computational challenges in the coordination of multi-agent systems can
be overcome. In this thesis, a CRN model is developed that defines agent control policies for a
multi-agent construction task. The use of surface CRNs to overcome the tradeoff between
speed and accuracy of task performance is explained. The computational difficulties involved
in coordinating multiple agents to complete collective construction tasks is then discussed. A
method for stochastic task and motion planning (TAMP) is proposed to explain how a TAMP
solver can be applied with CRNs to coordinate multiple agents.
This work defines a collective construction scenario in which a group of noncommunicating agents must rearrange blocks on a discrete domain with obstacles into a
predefined target distribution. Four different construction tasks are considered with 10, 20,
30, or 40 blocks, and a simulation of each scenario with 2, 4, 6, or 8 agents is performed. As the
number of blocks increases, the construction problem becomes more complex, and a given
population of agents requires more time to complete the task. Populations of fewer than 8
agents are unable to solve the 30-block and 40-block problems in the allotted simulation time,
suggesting an inflection point for computational feasibility, implying that beyond that point
the solution times for fewer than 8 agents would be expected to increase significantly. For a
group of 8 agents, the time to complete the task generally increases as the number of blocks
increases, except for the 30-block problem, which has specifications that make the task slightly
easier for the agents to complete compared to the 20-block problem. For the 10-block and 20-
block problems, the time to complete the task decreases as the number of agents increases;
however, the marginal effect of each additional two agents on this time decreases. This can be
explained through the pigeonhole principle: since there area finite number of states, when the
number of agents is greater than the number of available spaces, deadlocks start to occur and
the expectation is that the overall solution time to tend to infinity.
ContributorsKamojjhala, Pranav (Author) / Berman, Spring (Thesis advisor) / Fainekos, Gergios E (Thesis advisor) / Pavlic, Theodore P (Committee member) / Arizona State University (Publisher)
Created2022
Description
A Graph Neural Network (GNN) is a type of neural network architecture that operates on data consisting of objects and their relationships, which are represented by a graph. Within the graph, nodes represent objects and edges represent associations between those objects. The representation of relationships and correlations between data is unique to graph structures. GNNs exploit this feature of graphs by augmenting both forms of data, individual and relational, and have been designed to allow for communication and sharing of data within each neural network layer. These benefits allow each node to have an enriched perspective, or a better understanding, of its neighbouring nodes and its connections to those nodes. The ability of GNNs to efficiently process high-dimensional node data and multi-faceted relationships among nodes gives them advantages over neural network architectures such as Convolutional Neural Networks (CNNs) that do not implicitly handle relational data. These quintessential characteristics of GNN models make them suitable for solving problems in which the correspondences among input data are needed to produce an accurate and precise representation of these data. GNN frameworks may significantly improve existing communication and control techniques for multi-agent tasks by implicitly representing not only information associated with the individual agents, such as agent position, velocity, and camera data, but also their relationships with one another, such as distances between the agents and their ability to communicate with one another. One such task is a multi-agent navigation problem in which the agents must coordinate with one another in a decentralized manner, using proximity sensors only, to navigate safely to their intended goal positions in the environment without collisions or deadlocks. The contribution of this thesis is the design of an end-to-end decentralized control scheme for multi-agent navigation that utilizes GNNs to prevent inter-agent collisions and deadlocks. The contributions consist of the development, simulation and evaluation of the performance of an advantage actor-critic (A2C) reinforcement learning algorithm that employs actor and critic networks for training that simultaneously approximate the policy function and value function, respectively. These networks are implemented using GNN frameworks for navigation by groups of 3, 5, 10 and 15 agents in simulated two-dimensional environments. It is observed that in $40\%$ to $50\%$ of the simulation trials, between 70$\%$ to 80$\%$ of the agents reach their goal positions without colliding with other agents or becoming trapped in deadlocks. The model is also compared to a random run simulation, where actions are chosen randomly for the agents and observe that the model performs notably well for smaller groups of agents.
ContributorsAyalasomayajula, Manaswini (Author) / Berman, Spring (Thesis advisor) / Mian, Sami (Committee member) / Pavlic, Theodore (Committee member) / Arizona State University (Publisher)
Created2022
Description
Recently, Generative Adversarial Networks (GANs) have been applied to the problem of Cold-Start Recommendation, but the training performance of these models is hampered by the extreme sparsity in warm user purchase behavior. This thesis introduces a novel representation for user-vectors by combining user demographics and user preferences, making the model a hybrid system which uses Collaborative Filtering and Content Based Recommendation. This system models user purchase behavior using weighted user-product preferences (explicit feedback) rather than binary user-product interactions (implicit feedback). Using this a novel sparse adversarial model, Sparse ReguLarized Generative Adversarial Network (SRLGAN), is developed for Cold-Start Recommendation. SRLGAN leverages the sparse user-purchase behavior which ensures training stability and avoids over-fitting on warm users. The performance of SRLGAN is evaluated on two popular datasets and demonstrate state-of-the-art results.
ContributorsShah, Aksheshkumar Ajaykumar (Author) / Venkateswara, Hemanth (Thesis advisor) / Berman, Spring (Thesis advisor) / Ladani, Leila J (Committee member) / Arizona State University (Publisher)
Created2022
Description
Soft continuum robots with the ability to bend, twist, elongate, and shorten, similar to octopus arms, have many potential applications, such as dexterous manipulation and navigation through unstructured, dynamic environments. Novel soft materials such as smart hydrogels, which change volume and other properties in response to stimuli such as temperature, pH, and chemicals, can potentially be used to construct soft robots that achieve self-regulated adaptive reconfiguration through on-demand dynamic control of local properties. However, the design of controllers for soft continuum robots is challenging due to their high-dimensional configuration space and the complexity of modeling soft actuator dynamics. To address these challenges, this dissertation presents two different model-based control approaches for robots with distributed soft actuators and sensors and validates the approaches in simulations and physical experiments. It is demonstrated that by choosing an appropriate dynamical model and designing a decentralized controller based on this model, such robots can be controlled to achieve diverse types of complex configurations. The first approach consists of approximating the dynamics of the system, including its actuators, as a linear state-space model in order to apply optimal robust control techniques such as H∞ state-feedback and H∞ output-feedback methods. These techniques are designed to utilize the decentralized control structure of the robot and its distributed sensing and actuation to achieve vibration control and trajectory tracking. The approach is validated in simulation on an Euler-Bernoulli dynamic model of a hydrogel based cantilevered robotic arm and in experiments with a hydrogel-actuated miniature 2-DOF manipulator. The second approach is developed for soft continuum robots with dynamics that can be modeled using Cosserat rod theory. An inverse dynamics control approach is implemented on the Cosserat model of the robot for tracking configurations that include bending, torsion, shear, and extension deformations. The decentralized controller structure facilitates its implementation on robot arms composed of independently-controllable segments that have local sensing and actuation. This approach is validated on simulated 3D robot arms and on an actual silicone robot arm with distributed pneumatic actuation, for which the inverse dynamics problem is solved in simulation and the computed control outputs are applied to the robot in real-time.
ContributorsDoroudchi, Azadeh (Author) / Berman, Spring (Thesis advisor) / Tsakalis, Konstantinos (Committee member) / Si, Jennie (Committee member) / Marvi, Hamid (Committee member) / Arizona State University (Publisher)
Created2022
Description本文对中国制药企业并购溢价影响因素进行了研究，提出了对制药企业并购非常重要的两个新的影响因素：可生产药品批文和在研新药批文。本文以2011年1月—2019年12月间我国制药行业上市公司并购事件为样本，对在研新药和可生产药品批文的价值从四个维度度量：是否有在研新药和可生产药品批文；在研新药数量及可生产药品批文数量；根据创新药和仿制药两个类别进行细分；标的企业所拥有的在研新药和可生产药品批文的市场价值。论文发现药品批文对企业并购溢价的影响不是很显著。进一步的，本文探究了药品批文对主并企业的对被并购公司的估值的影响。实证结果表明，我国制药企业在并购估值时确实会考虑到在研新药和可生产药品批文的价值。本文还发现对于可生产药品来说，相对创新药，被并购公司持有的仿制药批文影响更显著。而对于在研新药来说，主并企业更看重在研的创新药，在研仿制药对并购估值的影响不大。最后，本文选取了两个代表性案例进一步分析和探讨药品批文对企业并购的影响。
ContributorsYe, Tao (Author) / Shen, Wei (Thesis advisor) / Chang, Chun (Thesis advisor) / Jiang, Zhan (Committee member) / Gu, Bin (Committee member) / Arizona State University (Publisher)
Created2022
Description
Disordered many-body systems are ubiquitous in condensed matter physics, materials science and biological systems. Examples include amorphous and glassy states of matter, granular materials, and tissues composed of packings of cells in the extra-cellular matrix (ECM). Understanding the collective emergent properties in these systems is crucial to improving the capability for controlling, engineering and optimizing their behaviors, yet it is extremely challenging due to their complexity and disordered nature. The main theme of the thesis is to address this challenge by characterizing and understanding a variety of disordered many-body systems via unique statistical geometrical and topological tools and the state-of-the-art simulation methods. Two major topics of the thesis are modeling ECM-mediated multicellular dynamics and understanding hyperuniformity in 2D material systems. Collective migration is an important mode of cell movement for several biological processes, and it has been the focus of a large number of studies over the past decades. Hyperuniform (HU) state is a critical state in a many-particle system, an exotic property of condensed matter discovered recently. The main focus of this thesis is to study the mechanisms underlying collective cell migration behaviors by developing theoretical/phenomenological models that capture the features of ECM-mediated mechanical communications in vitro and investigate general conditions that can be imposed on hyperuniformity-preserving and hyperuniformity-generating operations, as well as to understand how various novel transport physical properties arise from the unique hyperuniform long-range correlations.
ContributorsZheng, Yu (Author) / Jiao, Yang (Thesis advisor) / Zhuang, Houlong (Committee member) / Beckstein, Oliver (Committee member) / Ros, Robert (Committee member) / Arizona State University (Publisher)
Created2022
Description汽车行业属于国家支柱型产业，创造了高额的产值，增加了就业岗位。随着汽车生产行业竞争日趋激烈的趋势影响，汽车经销商在未来会出现明显的分化，并且逐步向头部集中。基于这样的行业背景，本项研究开展汽车经销商整体经营和盈利能力等方面的详细深入分析，即系统整合汽车经销商业务运营层面和财务层面数据，结合统计研究方法，对经销商盈利能力进行系统且详实归因分析，从而试别驱动盈利能力的关键业务要素。其研究成果能够完善对行业发展规律和经营模式系统性理解，从而进一步指导该领域的相关业务实践，提高经销商整体经营业绩。本课题通过四个阶段来开展经销商整体经营与盈利归因的相关研究。首先，本课题梳理了中国汽车消费行业发展的历史，同时阐述样本期内（2018-2020年）国内宏观经济和汽车消费市场的特征进行，并介绍X品牌汽车经销商的地理分布、资质和业绩评级体系、自身经营特征以及汽车生产商对经销商扶持政策等方面。在第二阶段，本课题聚焦研究假设、模型与方法，通过对X品牌汽车经销商的业务结构和运营管理开展分析，并逐步识别影响经销商盈利的关键指标变量，并提出研究假设和相关模型（即时间序列模型和面板回归模型）。在第三阶段，本课题首先开展经销商相关信息整体性统计分析，获得关键业务指标在样本期内动态特征，并结合时间序列回归模型探讨各项业务指标对经销商整体盈利能力的影响程度。在第四阶段，本课题采用（个体）固定效应的面板回归模型来研究不同组别（控制）条件下经销商盈利能力的影响因素以及其盈利能力对这些因素的敏感程度，从而更深入和全面地揭示影响经销商盈利能力的潜在因素。
基于上述四阶段的研究结果，本研究进一步就提升经销商盈利能力展开讨论，并提出相应对策。本课题相关结论仅从X品牌汽车经销商经营和财务数据进行定性和定量分析获得，但衷心希望本研究的成果能够对汽车经销商改善经营业务方面能起到实践上的借鉴和指导意义。
ContributorsPan, Guangxiong (Author) / Shen, Wei (Thesis advisor) / Wu, Fei (Thesis advisor) / Zhu, Qigui (Committee member) / Arizona State University (Publisher)
Created2022