Matching Items (68)
Description
Despite the various driver assistance systems and electronics, the threat to life of driver, passengers and other people on the road still persists. With the growth in technology, the use of in-vehicle devices with a plethora of buttons and features is increasing resulting in increased distraction. Recently, speech recognition has emerged as an alternative to distraction and has the potential to be beneficial. However, considering the fact that automotive environment is dynamic and noisy in nature, distraction may not arise from the manual interaction, but due to the cognitive load. Hence, speech recognition certainly cannot be a reliable mode of communication.
The thesis is focused on proposing a simultaneous multimodal approach for designing interface between driver and vehicle with a goal to enable the driver to be more attentive to the driving tasks and spend less time fiddling with distractive tasks. By analyzing the human-human multimodal interaction techniques, new modes have been identified and experimented, especially suitable for the automotive context. The identified modes are touch, speech, graphics, voice-tip and text-tip. The multiple modes are intended to work collectively to make the interaction more intuitive and natural. In order to obtain a minimalist user-centered design for the center stack, various design principles such as 80/20 rule, contour bias, affordance, flexibility-usability trade-off etc. have been implemented on the prototypes. The prototype was developed using the Dragon software development kit on android platform for speech recognition.
In the present study, the driver behavior was investigated in an experiment conducted on the DriveSafety driving simulator DS-600s. Twelve volunteers drove the simulator under two conditions: (1) accessing the center stack applications using touch only and (2) accessing the applications using speech with offered text-tip. The duration for which user looked away from the road (eyes-off-road) was measured manually for each scenario. Comparison of results proved that eyes-off-road time is less for the second scenario. The minimalist design with 8-10 icons per screen proved to be effective as all the readings were within the driver distraction recommendations (eyes-off-road time < 2sec per screen) defined by NHTSA.
The thesis is focused on proposing a simultaneous multimodal approach for designing interface between driver and vehicle with a goal to enable the driver to be more attentive to the driving tasks and spend less time fiddling with distractive tasks. By analyzing the human-human multimodal interaction techniques, new modes have been identified and experimented, especially suitable for the automotive context. The identified modes are touch, speech, graphics, voice-tip and text-tip. The multiple modes are intended to work collectively to make the interaction more intuitive and natural. In order to obtain a minimalist user-centered design for the center stack, various design principles such as 80/20 rule, contour bias, affordance, flexibility-usability trade-off etc. have been implemented on the prototypes. The prototype was developed using the Dragon software development kit on android platform for speech recognition.
In the present study, the driver behavior was investigated in an experiment conducted on the DriveSafety driving simulator DS-600s. Twelve volunteers drove the simulator under two conditions: (1) accessing the center stack applications using touch only and (2) accessing the applications using speech with offered text-tip. The duration for which user looked away from the road (eyes-off-road) was measured manually for each scenario. Comparison of results proved that eyes-off-road time is less for the second scenario. The minimalist design with 8-10 icons per screen proved to be effective as all the readings were within the driver distraction recommendations (eyes-off-road time < 2sec per screen) defined by NHTSA.
ContributorsMittal, Richa (Author) / Gaffar, Ashraf (Thesis advisor) / Femiani, John (Committee member) / Gray, Robert (Committee member) / Arizona State University (Publisher)
Created2015
Description
Medical errors are now estimated to be the third leading cause of death in the United States (Makary & Daniel, 2016). Look-alike, sound- alike prescription drug mix-ups contribute to this figure. The US Food and Drug Administration (FDA) and Institute for Safe Medication Practices (ISMP) have recommended the use of Tall Man lettering since 2008, in which dissimilar portions of confusable drug names pairs are capitalized in order to make them more distinguishable. Research on the efficacy of Tall Man lettering in differentiating confusable drug name pairs has been inconclusive and it is imperative to investigate potential efficacy further considering the clinical implications (Lambert, Schroeder & Galanter, 2015). The present study aimed to add to the body of research on Tall Man lettering while also investigating another possibility for the mechanism behind Tall Man’s efficacy, if it in fact exists. Studies indicate that the first letter in a word offers an advantage over other positions, resulting in more accurate and faster recognition (Adelman, Marquis & Sabatos-DeVito, 2010; Scaltritti & Balota, 2013). The present study used a 2x3 repeated measures design to analyze the effect of position on Tall Man lettering efficacy. Participants were shown a prime drug, followed by a brief mask, and then either the same drug name or its confusable pair and asked to identify whether they were the same or different. All participants completed both lowercase and Tall Man conditions. Overall performance measured by accuracy and reaction time revealed lowercase to be more effective than Tall Man. With regard to the position of Tall Man letters, a first position advantage was seen both in accuracy and reaction time. A first position advantage was seen in the lowercase condition as well, suggesting the location of the differing portion of the word matters more than the format used. These findings add to the body of inconclusive research on the efficacy of Tall Man lettering in drug name confusion. Considering its impact on patient safety, more research should be conducted to definitively answer the question as to whether or not Tall Man should be used in practice.
ContributorsKnobloch, Ashley (Author) / Branaghan, Russell (Thesis advisor) / Cooke, Nancy J. (Committee member) / Gray, Robert (Committee member) / Arizona State University (Publisher)
Created2017
Self-congruity, Preference, and Pathfinder: An Examination of News Media Outlet Knowledge Structures
Description
Using a modified news media brand personality scale developed by Kim, Baek, and Martin (2010), this study measured the personalities of eight news media outlets and combined them into the same associative network with participants’ self-image via the Pathfinder tool (Schvaneveldt, Durso, & Dearholt, 1989). Using these networks, this study was able to both explore the personality associations of participants and observe if self-congruity, measured by the distance between the self-image node and a brand, is significantly related to participant preference for a brand. Self-congruity was found to be significantly related to preference. However, this relationship was mediated by participants’ fiscal and social orientation. Overall, using Pathfinder to generate associative networks and measure self-congruity could be a useful approach for understanding how people perceive and relate to different news media outlets.
ContributorsWillinger, Jacob T (Author) / Branaghan, Russel (Thesis advisor) / Craig, Scotty (Committee member) / Gray, Robert (Committee member) / Arizona State University (Publisher)
Created2018
Description
This study exmaines the effect of in-vehicle infotainment display depth on driving performance. More features are being built into infotainment displays, allowing drivers to complete a greater number of secondary tasks while driving. However, the complexity of completing these tasks can take attention away from the primary task of driving, which may present safety risks. Tasks become more time consuming as the items drivers wish to select are buried deeper in a menu’s structure. Therefore, this study aims to examine how deeper display structures impact driving performance compared to more shallow structures.
Procedure. Participants complete a lead car following task, where they follow a lead car and attempt to maintain a time headway (TH) of 2 seconds behind the lead car at all times, while avoiding any collisions. Participants experience five conditions where they are given tasks to complete with an in-vehicle infotainment system. There are five conditions, each involving one of five displays with different structures: one-layer vertical, one-layer horizontal, two-layer vertical, two-layer horizontal, and three-layer. Brake Reaction Time (BRT), Mean Time Headway (MTH), Time Headway Variability (THV), and Time to Task Completion (TTC) are measured for each of the five conditions.
Results. There is a significant difference in MTH, THV, and TTC for the three-layer condition. There is a significant difference in BRT for the two-layer horizontal condition. There is a significant difference between one- and two-layer displays for all variables, BRT, MTH, THV, and TTC. There is also a significant difference between one- and three-layer displays for TTC.
Conclusions. Deeper displays negatively impact driving performance and make tasks more time consuming to complete while driving. One-layer displays appear to be optimal, although they may not be practical for in-vehicle displays.
Procedure. Participants complete a lead car following task, where they follow a lead car and attempt to maintain a time headway (TH) of 2 seconds behind the lead car at all times, while avoiding any collisions. Participants experience five conditions where they are given tasks to complete with an in-vehicle infotainment system. There are five conditions, each involving one of five displays with different structures: one-layer vertical, one-layer horizontal, two-layer vertical, two-layer horizontal, and three-layer. Brake Reaction Time (BRT), Mean Time Headway (MTH), Time Headway Variability (THV), and Time to Task Completion (TTC) are measured for each of the five conditions.
Results. There is a significant difference in MTH, THV, and TTC for the three-layer condition. There is a significant difference in BRT for the two-layer horizontal condition. There is a significant difference between one- and two-layer displays for all variables, BRT, MTH, THV, and TTC. There is also a significant difference between one- and three-layer displays for TTC.
Conclusions. Deeper displays negatively impact driving performance and make tasks more time consuming to complete while driving. One-layer displays appear to be optimal, although they may not be practical for in-vehicle displays.
ContributorsGran, Emily (Author) / Gray, Robert (Thesis advisor) / Branaghan, Russell (Committee member) / Carrasquilla, Christina (Committee member) / Arizona State University (Publisher)
Created2018
Description
Previous research has shown that training visual attention can improve golf putting performance. A technique called the Quiet Eye focuses on increasing a player’s length of fixation between the ball and the hole. When putting, the final fixation is made on the ball before executing the stroke leaving players to rely on their memory of the hole’s distance and location. The present study aimed to test the effectiveness of Quiet Eye training for final fixation on the hole. Twelve Arizona State University (ASU) students with minimal golf experience putted while wearing eye tracking glasses under the following conditions: from three feet with final fixation on the ball, from six feet with final fixation on the ball, from three feet with final fixation on the hole and from six feet with final fixation on the hole. Participant’s performance was measured before training, following quiet eye training, and under simulated pressure conditions. Putting performance was not significantly affected by final fixation for all conditions. The number of total putts made was significantly greater when putting from three feet for all conditions. Future research should test the effects of this training with expert golfers whose processes are more automatic compared to novices and can afford to look at the hole while putting.
ContributorsGomez, Dennis (Author) / Gray, Robert (Thesis advisor) / Branaghan, Russell (Committee member) / Mara, Andrew F (Committee member) / Arizona State University (Publisher)
Created2019
Description
Student pilots are the future of aviation and one of the biggest problems that they face as new pilots is fatigue. The survey was sent out asking if student pilots were fatigued, if they attribute flight training, school work, work outside of school, and social obligations to their sleep loss, and how they spend their time on those activities. The survey was given to aviation students at Arizona State University (ASU) Polytechnic Campus. ASU student pilots were found to be fatigued through a single sample t-test. Other t-tests were done on each of the questions that asked student pilots how flight training, school work, work outside of school and social obligations affect their sleep loss. Flight training and school were found to be contributing to student pilots sleep loss. Work outside of school and social obligations were found to not be contributing to student pilots sleep loss. It was found that student pilots’ tendency to use a planner or calendar was found to not be significant. Along with this planning through the week when they will do assignments or study for exams was also not found to be significant. Students making lists of assignments and when they are due was also found to not be significant. The t-test also found that student pilots are neutral on the topic of whether good time management skills would help increase the amount of sleep that they get.
ContributorsHarris, Mariah Jean (Author) / Cooke, Nancy J. (Thesis advisor) / Nullmeyer, Robert (Thesis advisor) / Gray, Robert (Committee member) / Arizona State University (Publisher)
Created2019
Description
What if there is a way to integrate prosthetics seamlessly with the human body and robots could help improve the lives of children with disabilities? With physical human-robot interaction being seen in multiple aspects of life, including industry, medical, and social, how these robots are interacting with human becomes even more important. Therefore, how smoothly the robot can interact with a person will determine how safe and efficient this relationship will be. This thesis investigates adaptive control method that allows a robot to adapt to the human's actions based on the interaction force. Allowing the relationship to become more effortless and less strained when the robot has a different goal than the human, as seen in Game Theory, using multiple techniques that adapts the system. Few applications this could be used for include robots in physical therapy, manufacturing robots that can adapt to a changing environment, and robots teaching people something new like dancing or learning how to walk after surgery.
The experience gained is the understanding of how a cost function of a system works, including the tracking error, speed of the system, the robot’s effort, and the human’s effort. Also, this two-agent system, results into a two-agent adaptive impedance model with an input for each agent of the system. This leads to a nontraditional linear quadratic regulator (LQR), that must be separated and then added together. Thus, creating a traditional LQR. This new experience can be used in the future to help build better safety protocols on manufacturing robots. In the future the knowledge learned from this research could be used to develop technologies for a robot to allow to adapt to help counteract human error.
The experience gained is the understanding of how a cost function of a system works, including the tracking error, speed of the system, the robot’s effort, and the human’s effort. Also, this two-agent system, results into a two-agent adaptive impedance model with an input for each agent of the system. This leads to a nontraditional linear quadratic regulator (LQR), that must be separated and then added together. Thus, creating a traditional LQR. This new experience can be used in the future to help build better safety protocols on manufacturing robots. In the future the knowledge learned from this research could be used to develop technologies for a robot to allow to adapt to help counteract human error.
ContributorsBell, Rebecca C (Author) / Zhang, Wenlong (Thesis advisor) / Chiou, Erin (Committee member) / Aukes, Daniel (Committee member) / Arizona State University (Publisher)
Created2019
Description
Human-robot interaction has expanded immensely within dynamic environments. The goals of human-robot interaction are to increase productivity, efficiency and safety. In order for the integration of human-robot interaction to be seamless and effective humans must be willing to trust the capabilities of assistive robots. A major priority for human-robot interaction should be to understand how human dyads have been historically effective within a joint-task setting. This will ensure that all goals can be met in human robot settings. The aim of the present study was to examine human dyads and the effects of an unexpected interruption. Humans’ interpersonal and individual levels of trust were studied in order to draw appropriate conclusions. Seventeen undergraduate and graduate level dyads were collected from Arizona State University. Participants were broken up into either a surprise condition or a baseline condition. Participants individually took two surveys in order to have an accurate understanding of levels of dispositional and individual levels of trust. The findings showed that participant levels of interpersonal trust were average. Surprisingly, participants who participated in the surprise condition afterwards, showed moderate to high levels of dyad trust. This effect showed that participants became more reliant on their partners when interrupted by a surprising event. Future studies will take this knowledge and apply it to human-robot interaction, in order to mimic the seamless team-interaction shown in historically effective dyads, specifically human team interaction.
ContributorsShaw, Alexandra Luann (Author) / Chiou, Erin (Thesis advisor) / Cooke, Nancy J. (Committee member) / Craig, Scotty (Committee member) / Arizona State University (Publisher)
Created2019
Description
Providing the user with good user experience is complex and involves multiple factors. One of the factors that can impact the user experience is animation. Animation can be tricky to get right and needs to be understood by designers. Animations that are too fast might not accomplish anything and having them too slow could slow the user down causing them to get frustrated.
This study explores the subject of animation and its speed by trying to answer the following questions – 1) Do people notice whether an animation is present 2) Does animation affect the enjoyment of a transition? and 3) If animation does affect enjoyment, what is the effect of different animation speeds?
The study was conducted using 3 prototypes of an application to order bottled water in which the transitions between different brands of bottled water were animated at 0ms, 300ms and 650ms. A survey was conducted to see if the participants were able to spot any difference between the prototypes and if they did, which one they preferred.
It was found that most people did not recognize any difference between the prototypes. Even people who recognized a difference between the prototypes did not have any preference of speed.
This study explores the subject of animation and its speed by trying to answer the following questions – 1) Do people notice whether an animation is present 2) Does animation affect the enjoyment of a transition? and 3) If animation does affect enjoyment, what is the effect of different animation speeds?
The study was conducted using 3 prototypes of an application to order bottled water in which the transitions between different brands of bottled water were animated at 0ms, 300ms and 650ms. A survey was conducted to see if the participants were able to spot any difference between the prototypes and if they did, which one they preferred.
It was found that most people did not recognize any difference between the prototypes. Even people who recognized a difference between the prototypes did not have any preference of speed.
ContributorsIjari, Kusum (Author) / Branaghan, Russell (Thesis advisor) / Chiou, Erin (Committee member) / Roscoe, Rod (Committee member) / Arizona State University (Publisher)
Created2019
Description
The focus of this study is on evaluating the perceived service quality of a passenger using Self Service Technologies (SST) based service delivery systems at airports. Previously, studies have been conducted to evaluate the benefits of these service delivery systems for the service providers and in theory, the benefits the passengers or customers may receive from using these SSTs. However, not much research has been done comparing the benefits passengers perceive from the SSTs and how the same compares with the benefits perceived by passengers while using a conventional service-employee based service delivery system, for example, manned check-in desks at airports. The data for the study was collected by surveying passengers using the scale questionnaire designed by Lin and Hsieh in 2011, named SSTQUAL (Self Service Technologies Quality), to evaluate service quality delivered by SST based service delivery systems in terms of perceived functionality, enjoyment, design-assurance-convenience, security/privacy and customization. These different dimensions were compared among passengers who utilized Self Service Kiosks (SSKs) and passengers who used check-in-desks to check their luggage in. The data derived from the responses was analyzed using Multivariate Analysis of Variance (MANOVA) to compare the between-subject effects of the dimensions as well as the overall multivariate significance in the difference between the service quality perceived between the two check-in methods. It was found that though the cumulative perceived service quality was not influenced by the method of check-in, individual service quality dimensions like Enjoyment, Design, Convenience and Assurance were influenced by the check-in method. Positive correlation was also established between the method of check-in and customer behavioral intentions of recommending and using the respective airline’s service again as well as going through the process of using the respective airline’s SST again.
Keywords: Self-Service Technologies, SSTQUAL, service-quality parameters, self check-in kiosks, manned check-in desks, technological readiness, customer behavioral intentions, MANOVA.
Keywords: Self-Service Technologies, SSTQUAL, service-quality parameters, self check-in kiosks, manned check-in desks, technological readiness, customer behavioral intentions, MANOVA.
ContributorsSingh, Aditya (Author) / Niemczyk, Mary C (Thesis advisor) / Gray, Robert (Committee member) / Hartman, James (Committee member) / Arizona State University (Publisher)
Created2018