technological systems that affect society, such as communication infrastructures. Data
assimilation addresses the challenge of state specification by incorporating system
observations into the model estimates. In this research, a particular data
assimilation technique called the Local Ensemble Transform Kalman Filter (LETKF) is
applied to the ionosphere, which is a domain of practical interest due to its effects
on infrastructures that depend on satellite communication and remote sensing. This
dissertation consists of three main studies that propose strategies to improve space-
weather specification during ionospheric extreme events, but are generally applicable
to Earth-system models:
Topic I applies the LETKF to estimate ion density with an idealized model of
the ionosphere, given noisy synthetic observations of varying sparsity. Results show
that the LETKF yields accurate estimates of the ion density field and unobserved
components of neutral winds even when the observation density is spatially sparse
(2% of grid points) and there is large levels (40%) of Gaussian observation noise.
Topic II proposes a targeted observing strategy for data assimilation, which uses
the influence matrix diagnostic to target errors in chosen state variables. This
strategy is applied in observing system experiments, in which synthetic electron density
observations are assimilated with the LETKF into the Thermosphere-Ionosphere-
Electrodynamics Global Circulation Model (TIEGCM) during a geomagnetic storm.
Results show that assimilating targeted electron density observations yields on
average about 60%–80% reduction in electron density error within a 600 km radius of
the observed location, compared to 15% reduction obtained with randomly placed
vertical profiles.
Topic III proposes a methodology to account for systematic model bias arising
ifrom errors in parametrized solar and magnetospheric inputs. This strategy is ap-
plied with the TIEGCM during a geomagnetic storm, and is used to estimate the
spatiotemporal variations of bias in electron density predictions during the
transitionary phases of the geomagnetic storm. Results show that this strategy reduces
error in 1-hour predictions of electron density by about 35% and 30% in polar regions
during the main and relaxation phases of the geomagnetic storm, respectively.
Lagrangian measures, identified with finite-time Lyapunov exponents, are first used to characterize transport patterns of inertial pollutant particles. Motivated by actual events the focus is on flows in realistic urban geometry. Both deterministic and stochastic transport patterns are identified, as inertial Lagrangian coherent structures. For the deterministic case, the organizing structures are well defined and are extracted at different hours of a day to reveal the variability of coherent patterns. For the stochastic case, a random displacement model for fluid particles is formulated, and used to derive the governing equations for inertial particles to examine the change in organizing structures due to ``zeroth-order'' random noise. It is found that, (1) the Langevin equation for inertial particles can be reduced to a random displacement model; (2) using random noise based on inhomogeneous turbulence, whose diffusivity is derived from $k$-$\epsilon$ models, major coherent structures survive to organize local flow patterns and weaker structures are smoothed out due to random motion.
A study of three-dimensional Lagrangian coherent structures (LCS) near HKIA is then presented and related to previous developments of two-dimensional (2D) LCS analyses in detecting windshear experienced by landing aircraft. The LCS are contrasted among three independent models and against 2D coherent Doppler light detection and ranging (LIDAR) data. Addition of the velocity information perpendicular to the lidar scanning cone helps solidify flow structures inferred from previous studies; contrast among models reveals the intramodel variability; and comparison with flight data evaluates the performance among models in terms of Lagrangian analyses. It is found that, while the three models and the LIDAR do recover similar features of the windshear experienced by a landing aircraft (along the landing trajectory), their Lagrangian signatures over the entire domain are quite different - a portion of each numerical model captures certain features resembling those LCS extracted from independent 2D LIDAR analyses based on observations. Overall, it was found that the Weather Research and Forecast (WRF) model provides the best agreement with the LIDAR data.
Finally, the three-dimensional variational (3DVAR) data assimilation scheme in WRF is used to incorporate the LIDAR line of sight velocity observations into the WRF model forecast at HKIA. Using two different days as test cases, it is found that the LIDAR data can be successfully and consistently assimilated into WRF. Using the updated model forecast LCS are extracted along the LIDAR scanning cone and compare to onboard flight data. It is found that the LCS generated from the updated WRF forecasts are generally better correlated with the windshear experienced by landing aircraft as compared to the LIDAR extracted LCS alone, which suggests that such a data assimilation scheme could be used for the prediction of windshear events.
photosynthesis involves the harvesting of light energy from the sun by the antenna (made
of pigments) of the PSII trans-membrane complex. The harvested excitation energy is
transferred from the antenna complex to the reaction center of the PSII, which leads to a
light-driven charge separation event, from water to plastoquinone. This phenomenal
process has been producing the oxygen that maintains the oxygenic environment of our
planet for the past 2.5 billion years.
The oxygen molecule formation involves the light-driven extraction of 4 electrons
and protons from two water molecules through a multistep reaction, in which the Oxygen
Evolving Center (OEC) of PSII cycles through 5 different oxidation states, S0 to S4.
Unraveling the water-splitting mechanism remains as a grant challenge in the field of
photosynthesis research. This requires the development of an entirely new capability, the
ability to produce molecular movies. This dissertation advances a novel technique, Serial
Femtosecond X-ray crystallography (SFX), into a new realm whereby such time-resolved
molecular movies may be attained. The ultimate goal is to make a “molecular movie” that
reveals the dynamics of the water splitting mechanism using time-resolved SFX (TRSFX)
experiments and the uniquely enabling features of X-ray Free-Electron Laser
(XFEL) for the study of biological processes.
This thesis presents the development of SFX techniques, including development of
new methods to analyze millions of diffraction patterns (~100 terabytes of data per XFEL
experiment) with the goal of solving the X-ray structures in different transition states.
ii
The research comprises significant advancements to XFEL software packages (e.g.,
Cheetah and CrystFEL). Initially these programs could evaluate only 8-10% of all the
data acquired successfully. This research demonstrates that with manual optimizations,
the evaluation success rate was enhanced to 40-50%. These improvements have enabled
TR-SFX, for the first time, to examine the double excited state (S3) of PSII at 5.5-Å. This
breakthrough demonstrated the first indication of conformational changes between the
ground (S1) and the double-excited (S3) states, a result fully consistent with theoretical
predictions.
The power of the TR-SFX technique was further demonstrated with proof-of principle
experiments on Photoactive Yellow Protein (PYP) micro-crystals that high
temporal (10-ns) and spatial (1.5-Å) resolution structures could be achieved.
In summary, this dissertation research heralds the development of the TR-SFX
technique, protocols, and associated data analysis methods that will usher into practice a
new era in structural biology for the recording of ‘molecular movies’ of any biomolecular
process.
A detailed evaluation of the environmental forecast is conducted by investigating the Surface Energy Balance (SEB) obtained from observations made with an eddy-covariance flux tower compared with SEB from simulations using several physical parameterizations of urban effects and planetary boundary layer schemes. Diurnal variation in SEB constituent fluxes are examined in relation to surface layer stability and modeled diagnostic variables. Improvement is found when adapting parameterizations for Phoenix with reduced errors in the SEB components. Finer model resolution (to 333 m) is seen to have insignificant ($<1\sigma$) influence on mean absolute percent difference of 30-minute diurnal mean SEB terms. A new method of representing inhomogeneous urban development density derived from observations of impervious surfaces with sub-grid scale resolution is then proposed for mesoscale applications. This method was implemented and evaluated within the environmental modeling framework. Finally, a new semi-implicit scheme based on Leapfrog and a fourth-order implicit time-filter is developed.
For autonomous systems, invariant manifold theory can be used to separate the system into dynamically distinct regions. Despite there being no equivalent method for nonautonomous systems, a similar analysis can be done. Systems with general time dependencies must resort to using finite-time transport barriers for partitioning; these barriers are the edges of Lagrangian coherent structures (LCS), the analog to the stable and unstable manifolds of invariant manifold theory. Using the coherent structures of a flow to analyze the statistics of trapping, flight, and residence times, the signature of anomalous diffusion are obtained.
This research also investigates the use of linear models for approximating the elements of the covariance matrix of nonlinear flows, and then applying the covariance matrix approximation over coherent regions. The first and second-order moments can be used to fully describe an ensemble evolution in linear systems, however there is no direct method for nonlinear systems. The problem is only compounded by the fact that the moments for nonlinear flows typically don't have analytic representations, therefore direct numerical simulations would be needed to obtain the moments throughout the domain. To circumvent these many computations, the nonlinear system is approximated as many linear systems for which analytic expressions for the moments exist. The parameters introduced in the linear models are obtained locally from the nonlinear deformation tensor.
prostate cancer is most commonly treated with hormonal therapy. The idea behind
hormonal therapy is to reduce androgen production, which prostate cancer cells
require for growth. Recently, the exploration of the synergistic effects of the drugs
used in hormonal therapy has begun. The aim was to build off of these recent
advancements and further refine the synergistic drug model. The advancements I
implement come by addressing biological shortcomings and improving the model’s
internal mechanistic structure. The drug families being modeled, anti-androgens,
and gonadotropin-releasing hormone analogs, interact with androgen production in a
way that is not completely understood in the scientific community. Thus the models
representing the drugs show progress through their ability to capture their effect
on serum androgen. Prostate-specific antigen is the primary biomarker for prostate
cancer and is generally how population models on the subject are validated. Fitting
the model to clinical data and comparing it to other clinical models through the
ability to fit and forecast prostate-specific antigen and serum androgen is how this
improved model achieves validation. The improved model results further suggest that
the drugs’ dynamics should be considered in adaptive therapy for prostate cancer.
We present results from experiments at the Linac Coherent Light Source (LCLS) demonstrating that serial femtosecond crystallography (SFX) can be performed to high resolution (~2.5 Å) using protein microcrystals deposited on an ultra-thin silicon nitride membrane and embedded in a preservation medium at room temperature. Data can be acquired at a high acquisition rate using x-ray free electron laser sources to overcome radiation damage, while sample consumption is dramatically reduced compared to flowing jet methods. We achieved a peak data acquisition rate of 10 Hz with a hit rate of ~38%, indicating that a complete data set could be acquired in about one 12-hour LCLS shift using the setup described here, or in even less time using hardware optimized for fixed target SFX. This demonstration opens the door to ultra low sample consumption SFX using the technique of diffraction-before-destruction on proteins that exist in only small quantities and/or do not produce the copious quantities of microcrystals required for flowing jet methods.
Mild Cognitive Impairment (MCI) is a transitional stage between normal aging and dementia and people with MCI are at high risk of progression to dementia. MCI is attracting increasing attention, as it offers an opportunity to target the disease process during an early symptomatic stage. Structural magnetic resonance imaging (MRI) measures have been the mainstay of Alzheimer's disease (AD) imaging research, however, ventricular morphometry analysis remains challenging because of its complicated topological structure. Here we describe a novel ventricular morphometry system based on the hyperbolic Ricci flow method and tensor-based morphometry (TBM) statistics. Unlike prior ventricular surface parameterization methods, hyperbolic conformal parameterization is angle-preserving and does not have any singularities. Our system generates a one-to-one diffeomorphic mapping between ventricular surfaces with consistent boundary matching conditions. The TBM statistics encode a great deal of surface deformation information that could be inaccessible or overlooked by other methods. We applied our system to the baseline MRI scans of a set of MCI subjects from the Alzheimer's Disease Neuroimaging Initiative (ADNI: 71 MCI converters vs. 62 MCI stable). Although the combined ventricular area and volume features did not differ between the two groups, our fine-grained surface analysis revealed significant differences in the ventricular regions close to the temporal lobe and posterior cingulate, structures that are affected early in AD. Significant correlations were also detected between ventricular morphometry, neuropsychological measures, and a previously described imaging index based on fluorodeoxyglucose positron emission tomography (FDG-PET) scans. This novel ventricular morphometry method may offer a new and more sensitive approach to study preclinical and early symptomatic stage AD.
The effects of urbanization on ozone levels have been widely investigated over cities primarily located in temperate and/or humid regions. In this study, nested WRF-Chem simulations with a finest grid resolution of 1 km are conducted to investigate ozone concentrations O3 due to urbanization within cities in arid/semi-arid environments. First, a method based on a shape preserving Monotonic Cubic Interpolation (MCI) is developed and used to downscale anthropogenic emissions from the 4 km resolution 2005 National Emissions Inventory (NEI05) to the finest model resolution of 1 km. Using the rapidly expanding Phoenix metropolitan region as the area of focus, we demonstrate the proposed MCI method achieves ozone simulation results with appreciably improved correspondence to observations relative to the default interpolation method of the WRF-Chem system. Next, two additional sets of experiments are conducted, with the recommended MCI approach, to examine impacts of urbanization on ozone production: (1) the urban land cover is included (i.e., urbanization experiments) and, (2) the urban land cover is replaced with the region's native shrubland. Impacts due to the presence of the built environment on O3 are highly heterogeneous across the metropolitan area. Increased near surface O3 due to urbanization of 10–20 ppb is predominantly a nighttime phenomenon while simulated impacts during daytime are negligible. Urbanization narrows the daily O3 range (by virtue of increasing nighttime minima), an impact largely due to the region's urban heat island. Our results demonstrate the importance of the MCI method for accurate representation of the diurnal profile of ozone, and highlight its utility for high-resolution air quality simulations for urban areas.