Background: Advancements in geographic information systems over the past two decades have increased the specificity by which an individual’s neighborhood environment may be spatially defined for physical activity and health research. This study investigated how different types of street network buffering methods compared in measuring a set of commonly used built environment measures (BEMs) and tested their performance on associations with physical activity outcomes.

Methods: An internationally-developed set of objective BEMs using three different spatial buffering techniques were used to evaluate the relative differences in resulting explanatory power on self-reported physical activity outcomes. BEMs were developed in five countries using ‘sausage,’ ‘detailed-trimmed,’ and ‘detailed,’ network buffers at a distance of 1 km around participant household addresses (n = 5883).

Results: BEM values were significantly different (p < 0.05) for 96% of sausage versus detailed-trimmed buffer comparisons and 89% of sausage versus detailed network buffer comparisons. Results showed that BEM coefficients in physical activity models did not differ significantly across buffering methods, and in most cases BEM associations with physical activity outcomes had the same level of statistical significance across buffer types. However, BEM coefficients differed in significance for 9% of the sausage versus detailed models, which may warrant further investigation.

Conclusions: Results of this study inform the selection of spatial buffering methods to estimate physical activity outcomes using an internationally consistent set of BEMs. Using three different network-based buffering methods, the findings indicate significant variation among BEM values, however associations with physical activity outcomes were similar across each buffering technique. The study advances knowledge by presenting consistently assessed relationships between three different network buffer types and utilitarian travel, sedentary behavior, and leisure-oriented physical activity outcomes.

Urban environmental measurements and observational statistics should reflect the properties generated over an adjacent area of adequate length where homogeneity is usually assumed. The determination of this characteristic source area that gives sufficient representation of the horizontal coverage of a sensing instrument or the fetch of transported quantities is of critical importance to guide the design and implementation of urban landscape planning strategies. In this study, we aim to unify two different methods for estimating source areas, viz. the statistical correlation method commonly used by geographers for landscape fragmentation and the mechanistic footprint model by meteorologists for atmospheric measurements. Good agreement was found in the intercomparison of the estimate of source areas by the two methods, based on 2-m air temperature measurement collected using a network of weather stations. The results can be extended to shed new lights on urban planning strategies, such as the use of urban vegetation for heat mitigation. In general, a sizable patch of landscape is required in order to play an effective role in regulating the local environment, proportional to the height at which stakeholders’ interest is mainly concerned.

The net storage heat flux (ΔQ[subscript S]) is important in the urban surface energy balance (SEB) but its determination remains a significant challenge. The hysteresis pattern of the diurnal relation between the ΔQ[subscript S] and net all-wave radiation (Q[superscript ∗]) has been captured in the Objective Hysteresis Model (OHM) parameterization of ΔQ[subscript S]. Although successfully used in urban areas, the limited availability of coefficients for OHM hampers its application. To facilitate use, and enhance physical interpretations of the OHM coefficients, an analytical solution of the one-dimensional advection–diffusion equation of coupled heat and liquid water transport in conjunction with the SEB is conducted, allowing development of AnOHM (Analytical Objective Hysteresis Model). A sensitivity test of AnOHM to surface properties and hydrometeorological forcing is presented using a stochastic approach (subset simulation). The sensitivity test suggests that the albedo, Bowen ratio and bulk transfer coefficient, solar radiation and wind speed are most critical. AnOHM, driven by local meteorological conditions at five sites with different land use, is shown to simulate the ΔQ[subscript S] flux well (RMSE values of ∼ 30 W m[superscript −2]). The intra-annual dynamics of OHM coefficients are explored. AnOHM offers significant potential to enhance modelling of the surface energy balance over a wider range of conditions and land covers.

Background: An online version of the Microscale Audit of Pedestrian Streetscapes (Abbreviated) tool was adapted to virtually audit built environment features supportive of physical activity. The current study assessed inter-rater reliability of MAPS Online between in-person raters and online raters unfamiliar with the regions.

Methods: In-person and online audits were conducted for a total of 120 quarter-mile routes (60 per site) in Phoenix, AZ and San Diego, CA. Routes in each city included 40 residential origins stratified by walkability and SES, and 20 commercial centers. In-person audits were conducted by raters residing in their region. Online audits were conducted by raters in the alternate location using Google Maps (Aerial and Street View) images. The MAPS Abbreviated Online tool consisted of four sections: overall route, street segments, crossings and cul-de-sacs. Items within each section were grouped into subscales, and inter-rater reliability (ICCs) was assessed for subscales at multiple levels of aggregation.

Results: Online and in-person audits showed excellent agreement for overall positive microscale (ICC = 0.86, 95% CI [0.80, 0.90]) and grand scores (ICC = 0.93, 95% CI [0.89, 0.95]). Substantial to near-perfect agreement was found for 21 of 30 (70%) subscales, valence, and subsection scores, with ICCs ranging from 0.62, 95% CI [0.50, 0.72] to 0.95, 95% CI [0.93, 0.97]. Lowest agreement was found for the aesthetics and social characteristics scores, with ICCs ranging from 0.07, 95% CI [−0.12, 0.24] to 0.27, 95% CI [0.10, 0.43].

Conclusions: Results support use of the MAPS Abbreviated Online tool to reliably assess microscale neighborhood features that support physical activity and may be used by raters residing in different geographic regions and unfamiliar with the audit areas.

Urban land–atmosphere interactions can be captured by numerical modeling framework with coupled land surface and atmospheric processes, while the model performance depends largely on accurate input parameters. In this study, we use an advanced stochastic approach to quantify parameter uncertainty and model sensitivity of a coupled numerical framework for urban land–atmosphere interactions. It is found that the development of urban boundary layer is highly sensitive to surface characteristics of built terrains. Changes of both urban land use and geometry impose significant impact on the overlying urban boundary layer dynamics through modification on bottom boundary conditions, i.e., by altering surface energy partitioning and surface aerodynamic resistance, respectively. Hydrothermal properties of conventional and green roofs have different impacts on atmospheric dynamics due to different surface energy partitioning mechanisms. Urban geometry (represented by the canyon aspect ratio), however, has a significant nonlinear impact on boundary layer structure and temperature. Besides, managing rooftop roughness provides an alternative option to change the boundary layer thermal state through modification of the vertical turbulent transport. The sensitivity analysis deepens our insight into the fundamental physics of urban land–atmosphere interactions and provides useful guidance for urban planning under challenges of changing climate and continuous global urbanization.

The hysteresis effect in diurnal cycles of net radiation R-n and ground heat flux G(0) has been observed in many studies, while the governing mechanism remains vague. In this study, we link the phenomenology of hysteresis loops to the wave phase difference between the diurnal evolutions of various terms in the surface energy balance. R-n and G(0) are parameterized with the incoming solar radiation and the surface temperature as two control parameters of the surface energy partitioning. The theoretical analysis shows that the vertical water flux W and the scaled ratio A(s)*/A(T)* (net shortwave radiation to outgoing longwave radiation) play crucial roles in shaping hysteresis loops of R-n and G(0). Comparisons to field measurements indicate that hysteresis loops for different land covers can be well captured by the theoretical model, which is also consistent with Camuffo-Bernadi formula. This study provides insight into the surface partitioning and temporal evolution of the energy budget at the land surface.

Background: To more accurately quantify the potential impact of the neighbourhood environment on adults’ physical activity (PA), it is important to compare environment-PA associations between periods of the day or week when adults are more versus less likely to be in their neighbourhood and utilise its PA resources. We examined whether, among adults from 10 countries, associations between objectively-assessed neighbourhood environment attributes and moderate-to-vigorous physical activity (MVPA) varied by time of the day and day of the week. The secondary aim was to examine whether such associations varied by employment status, gender and city.

Methods: This cross-sectional study included 6,712 adults from 14 cities across 10 countries with ≥1 day of valid accelerometer-assessed MVPA and complete information on socio-demographic and objectively-assessed environmental characteristics within 0.5 and 1 km street-network buffers around the home. Accelerometer measures (MVPA min/h) were created for six time periods from early morning until late evening/night, for weekdays and weekend days separately. Associations were estimated using generalized additive mixed models.

Results: Time of the day, day of week, gender and employment status were significant moderators of environment-MVPA associations. Land use mix was positively associated with MVPA in women who were employed and in men irrespective of their employment status. The positive associations between MVPA and net residential density, intersection density and land use mix were stronger in the mornings of weekdays and the afternoon/evening periods of both weekdays and weekend days. Associations between number of parks and MVPA were stronger in the mornings and afternoon/evenings irrespective of day of the week. Public transport density showed consistent positive associations with MVPA during weekends, while stronger effects on weekdays were observed in the morning and early evenings.

Conclusions: This study suggests that space and time constraints in adults’ daily activities are important factors that determine the impact of neighbourhood attributes on PA. Consideration of time-specific associations is important to better characterise the magnitude of the effects of the neighbourhood environment on PA. Future research will need to examine the contribution of built environment characteristics of areas surrounding other types of daily life centres (e.g., workplaces) to explaining adults’ PA at specific times of the day.

Asteroids provide fundamental clues to the formation and evolution of planetesimals. Collisional models based on the depletion of the primordial main belt of asteroids predict 10–15 craters >400 km should have formed on Ceres, the largest object between Mars and Jupiter, over the last 4.55 Gyr. Likewise, an extrapolation from the asteroid Vesta would require at least 6–7 such basins. However, Ceres’ surface appears devoid of impact craters >∼280 km. Here, we show a significant depletion of cerean craters down to 100–150 km in diameter. The overall scarcity of recognizable large craters is incompatible with collisional models, even in the case of a late implantation of Ceres in the main belt, a possibility raised by the presence of ammoniated phyllosilicates. Our results indicate that a significant population of large craters has been obliterated, implying that long-wavelength topography viscously relaxed or that Ceres experienced protracted widespread resurfacing.

Nocturnal cooling of urban areas governs the evolution of thermal state and many thermal-driven environmental issues in cities, especially those suffer strong urban heat island (UHI) effect. Advances in the fundamental understanding of the underlying physics of nighttime UHI involve disentangling complex contributing effects and remains an open challenge. In this study, we develop new numerical algorithms to characterize the thermodynamics of urban nocturnal cooling based on solving the energy balance equations for both the landscape surface and the overlying atmosphere. Further, a scaling law is proposed to relate the UHI intensity to a range of governing mechanisms, including the vertical and horizontal transport of heat in the surface layer, the urban-rural breeze, and the possible urban expansion. The accuracy of proposed methods is evaluated against in-situ urban measurements collected in cities with different geographic and climatic conditions. It is found that the vertical and horizontal contributors modulate the nocturnal UHI at distinct elevation in the atmospheric boundary layer.