The impact traditional East Asian design has had on modern-day East Asian design has not been extensively researched. This paper examines the relationship traditional East Asian architectural design has with more modern styles of design in order to determine and compare the extent to which Western-style influences have had an impact in Eastern societies. This research specifically focuses on the country of South Korea and explores various case studies and articles dating from the Joseon dynasty (1392-1910) till present day. By comparing factors related to South Korean culture, the environment, religious philosophies, etc., to architectural trends within the country, we are able to explore the distinct and changing architectural values the society has prioritised over the centuries. This research aims to provide a clearer and more solidified timeline of Korean architectural history which in the past has lacked to address the question revolving around the impact tradition has had on ongoing design trends. I then compare South Korean culture and architecture to other case studies on both East Asian and Western societies in order to determine similarities between past and present architectural styles. The introduction of Western-style architecture in East Asian societies occurred at different critical periods of time and has pushed architectural modernisation to evolve at various speeds and in different directions. By comparing case studies on Japan, China and Korea/South Korea, we are able to explore the various interpretations and the extent to which Western-style design has had influence in this countries. While certain symbolic elements in traditional East Asian architecture have been lost during the modernisation phase of design, there continues to be a link between past and present styles through the emergence of new and improved modern features that have acted as replacements for previous ones. Currently trending in South Korean society is the want to revive and reincorporate traditional architectural features in the city landscape. Perhaps a new vision will emerge where past will become the new modern, and this will encourage an even greater extent of traditional influences on modern architecture in East Asia.

Children with cerebral palsy suffer from balance deficits that may greatly reduce their quality of life. However, recent advancements in robotics allow for balance rehabilitation paradigms that provide greater control of the training environment and more robust measurement techniques. Previous works have shown functional balance improvement using standing surface perturbations and compliant surface balancing. Visual feedback during balance training has also been shown to improve postural balance control. However, the combined effect of these interventions has not been evaluated. This paper presents a robot-aided rehabilitation study for two children with cerebral palsy on a side-specific performance-adaptive compliant surface with perturbations. Visual feedback of the participant’s center of pressure and weight distribution were used to evaluate successful balance and trigger perturbations after a period of successful balancing. The platform compliance increased relative to the amount of successful balance during each training interval. Participants trained for 6 weeks including 10, less than 2 hours long, training sessions. Improvements in functional balance as assessed by the Pediatric Balance Scale, the Timed 10 Meter Walk Test, and the 5 Times Sit-to-Stand Test were observed for both participants. There was a reduction in fall risk as evidenced by increased Virtual Time to Contact and an increase in dynamic postural balance supported by a faster Time to Perturb, Time to Stabilize, and Percent Stabilized. A mixed improvement in static postural balance was also observed. This paper highlights the efficacy of robot-aided rehabilitation interventions as a method of balance therapy for children with cerebral palsy.

A study and fanzine of fandom culture, as it pertains to Korean pop (also known as K-pop music), focusing primarily on fan interactions between idols (celebrities) and fans via online messaging platforms (such as Universe and Bubble) and how it shapes parasocial relationships, which lead to positives of connection and communication intimacy and negatives of safety and monetary concerns.

A study and fanzine of fandom culture, as it pertains to Korean pop (also known as K-pop music), focusing primarily on fan interactions between idols (celebrities) and fans via online messaging platforms (such as Universe and Bubble) and how it shapes parasocial relationships, which lead to positives of connection and communication intimacy and negatives of safety and monetary concerns.

The production and incineration of single-use micropipette tips and disposable gloves, which are heavily used within laboratory facilities, generate large amounts of greenhouse gasses (GHGs) and accelerate climate change. Plastic waste that is not incinerated often is lost in the environment. The long degradation times associated with this waste exacerbates a variety of environmental problems such as substance runoff and ocean pollution. The objective of this study was to evaluate the efficacy of possible solutions for minimizing micropipette tip and disposable glove waste within laboratory spaces. It was hypothesized that simultaneously implementing the use of micropipette tip washers (MTWs) and energy-from-glove-waste programs (EGWs) would significantly reduce (p < 0.05) the average combined annual single-use plastic micropipette tip and nitrile glove waste (in kg) per square meter of laboratory space in the United States. ASU’s Biodesign Institute (BDI) was used as a case study to inform on the thousands of different laboratory facilities that exist all across the United States. Four separate research laboratories within the largest public university of the U.S. were sampled to assess the volume of plastic waste from single-use micropipette tips and gloves. Resultant data were used to represent the totality of single-use waste from the case study location and then extrapolated to all laboratory space in the United States. With the implementation of EGWs, annual BDI glove waste is reduced by 100% (0.47 ± 0.26 kg/m2; 35.5 ± 19.3 metric tons total) and annual BDI glove-related carbon emissions are reduced by ~5.01% (0.165 ± 0.09 kg/m2; 1.24 ± 0.68 metric tons total). With the implementation of MTWs, annual BDI micropipette tip waste is reduced by 92% (0.117 ± 0.03 kg/m2; 0.88 ± 0.25 metric tons total) and annual BDI tip-related carbon emissions are reduced by ~83.6% (4.04 ± 1.25 kg/m2; 30.5 ± 9.43 metric tons total). There was no significant difference (p = 0.06) observed between the mass of single-use waste (kg) in the sampled laboratory spaces before (x̄ = 47.1; σ = 43.3) and after (x̄ =0.070; σ = 0.033) the implementation of the solutions.When examining both solutions (MTWs & EGWs) implemented in conjunction with one another, the annual BDI financial savings (in regard to both purchasing and disposal costs) after the first year were determined to be ~$7.92 ± $9.31/m2 (7,500 m2 of total wet laboratory space) or ~$60,000 ± $70,000 total. These savings represent ~15.77% of annual BDI spending on micropipette tips and nitrile gloves. The large error margins in these financial estimates create high uncertainty for whether or not BDI would see net savings from implementing both solutions simultaneously. However, when examining the implementation of only MTWs, the annual BDI financial savings (in regard to both purchasing and disposal costs) after the first year were determined to be ~$12.01 ± $6.79 kg/m2 or ~$91,000 ± $51,200 total. These savings represent ~23.92% of annual BDI spending on micropipette tips and nitrile gloves. The lower error margins for this estimate create a much higher likelihood of net savings for BDI. Extrapolating to all laboratory space in the United States, the total annual amount of plastic waste avoided with the implementation of the MTWs was identified as 8,130 ± 2,290 tons or 0.023% of all solid plastic waste produced in the United States in 2018. The total amount of nitrile waste avoided with the implementation of the EGWs was identified as 32,800 ± 17,900 tons or 0.36% of all rubber solid waste produced in the United States in 2018. The total amount of carbon emissions avoided with the implementation of the MTWs was identified as 281,000 ± 87,000 tons CO2eq or 5.4*10-4 % of all CO2eq GHG emissions produced in the United States in 2020. Both the micropipette tip washer and the glove waste avoidance program solutions can be easily integrated into existing laboratories without compromising the integrity of the activities taking place. Implemented on larger scales, these solutions hold the potential for significant single-use waste reduction.

The production and incineration of single-use micropipette tips and disposable gloves, which are heavily used within laboratory facilities, generate large amounts of greenhouse gasses (GHGs) and accelerate climate change. Plastic waste that is not incinerated often is lost in the environment. The long degradation times associated with this waste exacerbates a variety of environmental problems such as substance runoff and ocean pollution. The objective of this study was to evaluate the efficacy of possible solutions for minimizing micropipette tip and disposable glove waste within laboratory spaces. It was hypothesized that simultaneously implementing the use of micropipette tip washers (MTWs) and energy-from-glove-waste programs (EGWs) would significantly reduce (p < 0.05) the average combined annual single-use plastic micropipette tip and nitrile glove waste (in kg) per square meter of laboratory space in the United States. ASU’s Biodesign Institute (BDI) was used as a case study to inform on the thousands of different laboratory facilities that exist all across the United States. Four separate research laboratories within the largest public university of the U.S. were sampled to assess the volume of plastic waste from single-use micropipette tips and gloves. Resultant data were used to represent the totality of single-use waste from the case study location and then extrapolated to all laboratory space in the United States. With the implementation of EGWs, annual BDI glove waste is reduced by 100% (0.47 ± 0.26 kg/m2; 35.5 ± 19.3 metric tons total) and annual BDI glove-related carbon emissions are reduced by ~5.01% (0.165 ± 0.09 kg/m2; 1.24 ± 0.68 metric tons total). With the implementation of MTWs, annual BDI micropipette tip waste is reduced by 92% (0.117 ± 0.03 kg/m2; 0.88 ± 0.25 metric tons total) and annual BDI tip-related carbon emissions are reduced by ~83.6% (4.04 ± 1.25 kg/m2; 30.5 ± 9.43 metric tons total). There was no significant difference (p = 0.06) observed between the mass of single-use waste (kg) in the sampled laboratory spaces before (x̄ = 47.1; σ = 43.3) and after (x̄ =0.070; σ = 0.033) the implementation of the solutions.When examining both solutions (MTWs & EGWs) implemented in conjunction with one another, the annual BDI financial savings (in regard to both purchasing and disposal costs) after the first year were determined to be ~$7.92 ± $9.31/m2 (7,500 m2 of total wet laboratory space) or ~$60,000 ± $70,000 total. These savings represent ~15.77% of annual BDI spending on micropipette tips and nitrile gloves. The large error margins in these financial estimates create high uncertainty for whether or not BDI would see net savings from implementing both solutions simultaneously. However, when examining the implementation of only MTWs, the annual BDI financial savings (in regard to both purchasing and disposal costs) after the first year were determined to be ~$12.01 ± $6.79 kg/m2 or ~$91,000 ± $51,200 total. These savings represent ~23.92% of annual BDI spending on micropipette tips and nitrile gloves. The lower error margins for this estimate create a much higher likelihood of net savings for BDI. Extrapolating to all laboratory space in the United States, the total annual amount of plastic waste avoided with the implementation of the MTWs was identified as 8,130 ± 2,290 tons or 0.023% of all solid plastic waste produced in the United States in 2018. The total amount of nitrile waste avoided with the implementation of the EGWs was identified as 32,800 ± 17,900 tons or 0.36% of all rubber solid waste produced in the United States in 2018. The total amount of carbon emissions avoided with the implementation of the MTWs was identified as 281,000 ± 87,000 tons CO2eq or 5.4*10-4 % of all CO2eq GHG emissions produced in the United States in 2020. Both the micropipette tip washer and the glove waste avoidance program solutions can be easily integrated into existing laboratories without compromising the integrity of the activities taking place. Implemented on larger scales, these solutions hold the potential for significant single-use waste reduction.