Matching Items (182)
Description
I present the results of studies from two historically separate fields of research: heat related illness and human thermal comfort adaptation. My research objectives were: (a) to analyze the relationships between climate and heat related morbidity in Phoenix, Arizona and Chicago, Illinois; (b) explore possible linkages of human thermal comfort adaptation to heat-related illness; and (c) show possible benefits of collaboration between the two fields of research. Previous climate and mortality studies discovered regional patterns in summertime mortality in North America: lower in hot, southern cities compared to more temperate cities. I examined heat related emergency (911) dispatches from these two geographically and climatically different cities. I analyzed with local weather conditions with 911 dispatches identified by responders as "heat" related from 2001 to 2006 in Phoenix and 2003 through 2006 in Chicago. Both cities experienced a rapid rise in heat-related dispatches with increasing temperature and heat index, but at higher thresholds in Phoenix. Overall, Phoenix had almost two and half times more heat-related dispatches than Chicago. However, Phoenix did not experience the large spikes of heat-related dispatches that occurred in Chicago. These findings suggest a resilience to heat-related illness that may be linked to acclimatization in Phoenix. I also present results from a survey based outdoor human thermal comfort field study in Phoenix to assess levels of local acclimatization. Previous research in outdoor human thermal comfort in hot humid and temperate climates used similar survey-based methodologies and found higher levels of thermal comfort (adaptation to heat) that in warmer climates than in cooler climates. The study presented in this dissertation found outdoor thermal comfort thresholds and heat tolerance levels in Phoenix were higher than previous studies from temperate climates more similar to Chicago. These differences were then compared to the differences in weather conditions associated with heat-related dispatches. The higher comfort thresholds in Phoenix were similar in scale to the climate differences associated with the upsurge in heat-related dispatches in Phoenix and Chicago. This suggests a link between heat related illness and acclimatization, and illustrates potential for collaboration in research between the two fields.
ContributorsHartz, Donna (Author) / Brazel, Anthony J. (Thesis advisor) / Heisler, Gordon (Committee member) / Cerveny, Randal (Committee member) / Arizona State University (Publisher)
Created2012
Description
This study considered the impact of grid resolution on wind velocity simulated by the Weather Research and Forecasting (WRF) model. The period simulated spanned November 2009 through January 2010, for which, multi-resolution nested domains were examined. Basic analysis was performed utilizing the data assimilation tools of NCEP/NCAR (National Center for Environmental Prediction/National Center for Atmospheric Research) to determine the ideal location to examine during the simulation was the Pacific Northwest portion of the United States, specifically the border between California and Oregon. The simulated mutli-resolution nested domains in this region indicated an increase in apparent wind speed as the resolution for the domain was increased. These findings were confirmed by statistical analysis which identified a positive bias for wind speed with respect to increased resolution as well as a correlation coefficient indicating the existence of a positive change in wind speed with increased resolution. An analysis of temperature change was performed in order to test the validity of the findings of the WRF simulation model. The statistical analysis performed on temperature change throughout the increased grid resolution did not indicate any change in temperature. In fact the correlation coefficient values between the domains were found in the 0.90 range, indicating the non-sensitivity of temperature across the increased resolutions. These results validate the findings of the WRF simulation: increased wind velocity can be observed at higher grid resolution. The study then considered the difference between wind velocity observed over the entire domains and the wind velocity observed solely over offshore locations. Wind velocity was observed to be significantly higher (an increase of 68.4%) in the offshore locations. The findings of this study suggest simulation tools should be utilized to examine domains at a higher resolution in order to identify potential locations for wind farms. The results go further to suggest the ideal location for these potential wind farms will be at offshore locations.
ContributorsBouey, Michael (Author) / Huang, Huei-Ping (Thesis advisor) / Trimble, Steve (Committee member) / Ronald, Ronald (Committee member) / Arizona State University (Publisher)
Created2012
Description
The project is mainly aimed at detecting the gas flow rate in Biosensors and medical health applications by means of an acoustic method using whistle based device. Considering the challenges involved in maintaining particular flow rate and back pressure for detecting certain analytes in breath analysis the proposed system along with a cell phone provides a suitable way to maintain the flow rate without any additional battery driven device. To achieve this, a system-level approach is implemented which involves development of a closed end whistle which is placed inside a tightly fitted constant back pressure tube. By means of experimentation pressure vs. flowrate curve is initially obtained and used for the development of the particular whistle. Finally, by means of an FFT code in a cell phone the flow rate vs. frequency characteristic curve is obtained. When a person respires through the device a whistle sound is generated which is captured by the cellphone microphone and a FFT analysis is performed to determine the frequency and hence the flow rate from the characteristic curve. This approach can be used to detect flow rate as low as low as 1L/min. The concept has been applied for the first time in this work to the development and optimization of a breath analyzer.
ContributorsRavichandran, Balaje Dhanram (Author) / Forzani, Erica (Thesis advisor) / Xian, Xiaojun (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2012
Description
The heat and mass transfer phenomena in micro-scale for the mass transfer phenomena on drug in cylindrical matrix system, the simulation of oxygen/drug diffusion in a three dimensional capillary network, and a reduced chemical kinetic modeling of gas turbine combustion for Jet propellant-10 have been studied numerically. For the numerical analysis of the mass transfer phenomena on drug in cylindrical matrix system, the governing equations are derived from the cylindrical matrix systems, Krogh cylinder model, which modeling system is comprised of a capillary to a surrounding cylinder tissue along with the arterial distance to veins. ADI (Alternative Direction Implicit) scheme and Thomas algorithm are applied to solve the nonlinear partial differential equations (PDEs). This study shows that the important factors which have an effect on the drug penetration depth to the tissue are the mass diffusivity and the consumption of relevant species during the time allowed for diffusion to the brain tissue. Also, a computational fluid dynamics (CFD) model has been developed to simulate the blood flow and oxygen/drug diffusion in a three dimensional capillary network, which are satisfied in the physiological range of a typical capillary. A three dimensional geometry has been constructed to replicate the one studied by Secomb et al. (2000), and the computational framework features a non-Newtonian viscosity model for blood, the oxygen transport model including in oxygen-hemoglobin dissociation and wall flux due to tissue absorption, as well as an ability to study the diffusion of drugs and other materials in the capillary streams. Finally, a chemical kinetic mechanism of JP-10 has been compiled and validated for a wide range of combustion regimes, covering pressures of 1atm to 40atm with temperature ranges of 1,200 K - 1,700 K, which is being studied as a possible Jet propellant for the Pulse Detonation Engine (PDE) and other high-speed flight applications such as hypersonic missiles. The comprehensive skeletal mechanism consists of 58 species and 315 reactions including in CPD, Benzene formation process by the theory for polycyclic aromatic hydrocarbons (PAH) and soot formation process on the constant volume combustor, premixed flame characteristics.
ContributorsBae, Kang-Sik (Author) / Lee, Taewoo (Thesis advisor) / Huang, Huei-Ping (Committee member) / Calhoun, Ronald (Committee member) / Phelan, Patrick (Committee member) / Lopez, Juan (Committee member) / Arizona State University (Publisher)
Created2012
Description
Isentropic analysis is a type of analysis that is based on using the concept of potential temperatures, the adiabatically established temperature at 1000 hPa. In the 1930s and 1940s this type of analysis proved to be valuable in indicating areas of increased moisture content and locations experiencing flow up or down adiabatic surfaces. However, in the early 1950s, this type of analysis faded out of use and not until the twenty-first century have some researchers started once again to examine the usefulness of isentropic analysis. One aspect in which isentropic analysis could be practical, based on prior research, is in severe weather situations, due to its ability to easily show adiabatic motion and moisture. As a result, I analyzed monthly climatological isentropic surfaces to identify distinct patterns associated with tornado occurrences for specific regions and months across the contiguous United States. I collected tornado reports from 1974 through 2009 to create tornado regions for each month across the contiguous United States and corresponding upper air data for the same time period. I then separated these upper air data into tornado and non-tornado days for specific regions and conducted synoptic and statistical analyses to establish differences between the two. Finally, I compared those results with analyses of individual case studies for each defined region using independent data from 2009 through 2010. On tornado days distinct patterns can be identified on the isentropic surface: (1) the average isentropic surface lowered on tornado days indicating a trough across the region, (2) a corresponding increase in moisture content occurred across the tornado region, and (3) wind shifted in such a manner to produce flow up the isentropic trough indicating uplift. When comparing the climatological results with the case studies, the isentropic pattern for the case studies in general was more pronounced compared to the climatological pattern; however, this would be expected as when creating the average the pattern/conditions will be smoothed. These findings begin to bridge the large gap in literature, show the usefulness of isentropic analysis in monthly and daily use and serve as catalysts to create a finer resolution database in isentropic coordinates.
ContributorsPace, Matthew Brandon (Author) / Cerveny, Randall S. (Thesis advisor) / Selover, Nancy J (Committee member) / Brazel, Anthony J. (Committee member) / Arizona State University (Publisher)
Created2012
Description
This doctoral thesis investigates the predictability characteristics of floods and flash floods by coupling high resolution precipitation products to a distributed hydrologic model. The research hypotheses are tested at multiple watersheds in the Colorado Front Range (CFR) undergoing warm-season precipitation. Rainfall error structures are expected to propagate into hydrologic simulations with added uncertainties by model parameters and initial conditions. Specifically, the following science questions are addressed: (1) What is the utility of Quantitative Precipitation Estimates (QPE) for high resolution hydrologic forecasts in mountain watersheds of the CFR?, (2) How does the rainfall-reflectivity relation determine the magnitude of errors when radar observations are used for flood forecasts?, and (3) What are the spatiotemporal limits of flood forecasting in mountain basins when radar nowcasts are used into a distributed hydrological model?. The methodology consists of QPE evaluations at the site (i.e., rain gauge location), basin-average and regional scales, and Quantitative Precipitation Forecasts (QPF) assessment through regional grid-to-grid verification techniques and ensemble basin-averaged time series. The corresponding hydrologic responses that include outlet discharges, distributed runoff maps, and streamflow time series at internal channel locations, are used in light of observed and/or reference data to diagnose the suitability of fusing precipitation forecasts into a distributed model operating at multiple catchments. Results reveal that radar and multisensor QPEs lead to an improved hydrologic performance compared to simulations driven with rain gauge data only. In addition, hydrologic performances attained by satellite products preserve the fundamental properties of basin responses, including a simple scaling relation between the relative spatial variability of runoff and its magnitude. Overall, the spatial variations contained in gridded QPEs add value for warm-season flood forecasting in mountain basins, with sparse data even if those products contain some biases. These results are encouraging and open new avenues for forecasting in regions with limited access and sparse observations. Regional comparisons of different reflectivity -rainfall (Z-R) relations during three summer seasons, illustrated significant rainfall variability across the region. Consistently, hydrologic errors introduced by the distinct Z-R relations, are significant and proportional (in the log-log space) to errors in precipitation estimations and stream flow magnitude. The use of operational Z-R relations without prior calibration may lead to wrong estimation of precipitation, runoff magnitude and increased flood forecasting errors. This suggests that site-specific Z-R relations, prior to forecasting procedures, are desirable in complex terrain regions. Nowcasting experiments show the limits of flood forecasting and its dependence functions of lead time and basin scale. Across the majority of the basins, flood forecasting skill decays with lead time, but the functional relation depends on the interactions between watershed properties and rainfall characteristics. Both precipitation and flood forecasting skills are noticeably reduced for lead times greater than 30 minutes. Scale dependence of hydrologic forecasting errors demonstrates reduced predictability at intermediate-size basins, the typical scale of convective storm systems. Overall, the fusion of high resolution radar nowcasts and the convenient parallel capabilities of the distributed hydrologic model provide an efficient framework for generating accurate real-time flood forecasts suitable for operational environments.
ContributorsMoreno Ramirez, Hernan (Author) / Vivoni, Enrique R. (Thesis advisor) / Ruddell, Benjamin L. (Committee member) / Gochis, David J. (Committee member) / Mays, Larry W. (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2012
Description
This study performs numerical modeling for the climate of semi-arid regions by running a high-resolution atmospheric model constrained by large-scale climatic boundary conditions, a practice commonly called climate downscaling. These investigations focus especially on precipitation and temperature, quantities that are critical to life in semi-arid regions. Using the Weather Research and Forecast (WRF) model, a non-hydrostatic geophysical fluid dynamical model with a full suite of physical parameterization, a series of numerical sensitivity experiments are conducted to test how the intensity and spatial/temporal distribution of precipitation change with grid resolution, time step size, the resolution of lower boundary topography and surface characteristics. Two regions, Arizona in U.S. and Aral Sea region in Central Asia, are chosen as the test-beds for the numerical experiments: The former for its complex terrain and the latter for the dramatic man-made changes in its lower boundary conditions (the shrinkage of Aral Sea). Sensitivity tests show that the parameterization schemes for rainfall are not resolution-independent, thus a refinement of resolution is no guarantee of a better result. But, simulations (at all resolutions) do capture the inter-annual variability of rainfall over Arizona. Nevertheless, temperature is simulated more accurately with refinement in resolution. Results show that both seasonal mean rainfall and frequency of extreme rainfall events increase with resolution. For Aral Sea, sensitivity tests indicate that while the shrinkage of Aral Sea has a dramatic impact on the precipitation over the confine of (former) Aral Sea itself, its effect on the precipitation over greater Central Asia is not necessarily greater than the inter-annual variability induced by the lateral boundary conditions in the model and large scale warming in the region. The numerical simulations in the study are cross validated with observations to address the realism of the regional climate model. The findings of this sensitivity study are useful for water resource management in semi-arid regions. Such high spatio-temporal resolution gridded-data can be used as an input for hydrological models for regions such as Arizona with complex terrain and sparse observations. Results from simulations of Aral Sea region are expected to contribute to ecosystems management for Central Asia.
ContributorsSharma, Ashish (Author) / Huang, Huei-Ping (Thesis advisor) / Adrian, Ronald (Committee member) / Herrmann, Marcus (Committee member) / Phelan, Patrick E. (Committee member) / Vivoni, Enrique (Committee member) / Arizona State University (Publisher)
Created2012
Description
Accurate characterization of forest canopy cover from satellite imagery hinges on the development of a model that considers the level of detail achieved by field methods. With the improved precision of both optical sensors and various spatial techniques, models built to extract forest structure attributes have become increasingly robust, yet many still fail to address some of the most important characteristics of a forest stand's intricate make-up. The objective of this study, therefore, was to address canopy cover from the ground, up. To assess canopy cover in the field, a vertical densitometer was used to acquire a total of 2,160 percent-cover readings from 30 randomly located triangular plots within a 6.94 km2 study area in the central highlands of the Bradshaw Ranger District, Prescott National Forest, Arizona. Categorized by species with the largest overall percentage of cover observations (Pinus ponderosa, Populus tremuloides, and Quercus gambelii), three datasets were created to assess the predictability of coniferous, deciduous, and mixed (coniferous and deciduous) canopies. Landsat-TM 5 imagery was processed using six spectral enhancement algorithms (PCA, TCT, NDVI, EVI, RVI, SAVI) and three local windows (3x3, 5x5, 7x7) to extract and assess the various ways in which these data were expressed in the imagery, and from those expressions, develop a model that predicted percent-cover for the entire study area. Generally, modeled cover estimates exceeded actual cover, over predicting percent-cover by a margin of 9-13%. Models predicted percent-cover more accurately when treated with a 3x3 local window than those treated with 5x5 and 7x7 local windows. In addition, the performance of models defined by the principal components of three vegetation indices (NDVI, EVI, RVI) were superior to those defined by the principal components of all four (NDVI, EVI, RVI, SAVI), as well as the principal and tasseled cap components of all multispectral bands (bands 123457). Models designed to predict mixed and coniferous percent-cover were more accurate than deciduous models.
ContributorsSchirmang, Tracy Lynn (Author) / Myint, Soe W (Thesis advisor) / Fall, Patricia L. (Thesis advisor) / Brazel, Anthony J. (Committee member) / Arizona State University (Publisher)
Created2012
Description
The global energy demand is expected to grow significantly in the next several decades and support for energy generation with high carbon emissions is continuing to decline. Alternative methods have gained interest, and wind energy has established itself as a viable source. Standard wind farms have limited room for growth and improvement, so wind energy has started to explore different directions. The urban environment is a potential direction for wind energy due to its proximity to the bulk of energy demand. CFD analysis has demonstrated that the presence of buildings can accelerate wind speeds between buildings and on rooftops. However, buildings generate areas of increased turbulence at their surface. The turbulence thickness and intensity vary with roof shape, building height, and building orientation. The analysis has concluded that good wind resource is possible in the urban environment in specific locations. With that, turbine selection becomes very important. A comparison has concluded that vertical axis wind turbines are more useful in the urban environment than horizontal axis wind turbines. Furthermore, building-augmented wind turbines are recommended because they are architecturally integrated into a building for the specific purpose of generating more energy. The research has concluded that large-scale generation in the urban environment is unlikely to be successful, but small-scale generation is quite viable. Continued research and investigation on urban wind energy is recommended.
ContributorsKlumpers, Ryan Scott (Author) / Calhoun, Ronald (Thesis director) / Huang, Huei-Ping (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2014-05
Description
The paper presents a new exhaust header design to replace the current design on Arizona State University's Formula SAE car. Also, the thought process of the design was presented as well as a method of analysis for tuning the exhaust headers. The equation presented was then compared with a computational fluid dynamics model using ANSYS Fluent. It was found that the equation did not match the timing of the CFD model. However, the design does allow for simple changes to be made in order to reduce the length of the exhaust and allow for the correct tuning. Also, the design minimizes interference between the individual headers which is ideal to increase engine performance. The exhaust meets the Formula SAE regulations, and is designed to fit in the new chassis for the FSAE car that ASU will run in 2015. Recommendations were also made to further improve the design and analysis model.
ContributorsKaashoek, Kevin Jason (Author) / Huang, Huei-Ping (Thesis director) / Trimble, Steven (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2014-05