Matching Items (314)
128226-Thumbnail Image.png
Description

The human hand has so many degrees of freedom that it may seem impossible to control. A potential solution to this problem is “synergy control” which combines dimensionality reduction with great flexibility. With applicability to a wide range of tasks, this has become a very popular concept. In this review,

The human hand has so many degrees of freedom that it may seem impossible to control. A potential solution to this problem is “synergy control” which combines dimensionality reduction with great flexibility. With applicability to a wide range of tasks, this has become a very popular concept. In this review, we describe the evolution of the modern concept using studies of kinematic and force synergies in human hand control, neurophysiology of cortical and spinal neurons, and electromyographic (EMG) activity of hand muscles. We go beyond the often purely descriptive usage of synergy by reviewing the organization of the underlying neuronal circuitry in order to propose mechanistic explanations for various observed synergy phenomena. Finally, we propose a theoretical framework to reconcile important and still debated concepts such as the definitions of “fixed” vs. “flexible” synergies and mechanisms underlying the combination of synergies for hand control.

ContributorsSantello, Marco (Author) / Baud-Bovy, Gabriel (Author) / Jorntell, Henrik (Author) / Ira A. Fulton Schools of Engineering (Contributor)
Created2013-04-08
128709-Thumbnail Image.png
Description

Pure coconut oil, lanolin, and acetaminophen were vaporized at rates of 1–50 mg/min, using a porous network exhibiting a temperature gradient from 5000 to 5500 K/mm, without incurring noticeable chemical changes due to combustion, oxidation, or other thermally-induced chemical structural changes. The newly coined term “ereptiospiration” is used here to

Pure coconut oil, lanolin, and acetaminophen were vaporized at rates of 1–50 mg/min, using a porous network exhibiting a temperature gradient from 5000 to 5500 K/mm, without incurring noticeable chemical changes due to combustion, oxidation, or other thermally-induced chemical structural changes. The newly coined term “ereptiospiration” is used here to describe this combination of thermal transpiration at high temperature gradients since the process can force the creation of thermal aerosols by rapid heating in a localized zone. Experimental data were generated for these materials using two different supports for metering the materials to the battery powered coil: namely, a stainless steel fiber bundle and a 3-D printed steel cartridge. Heating coconut oil, lanolin, or acetaminophen in a beaker to lower temperatures than those achieved at the surface of the coil showed noticeable and rapid degradation in the samples, while visual and olfactory observations for ereptiospiration showed no noticeable degradation in lanolin and coconut oil while HPLC chromatograms along with visual observation confirm that within the limit of detection, acetaminophen remains chemically unaltered by ereptiospiration.

ContributorsWoolley, Christine (Author) / Garcia, Antonio (Author) / Santello, Marco (Author) / Ira A. Fulton Schools of Engineering (Contributor)
Created2017-04-12
135932-Thumbnail Image.png
Description
While SPICE circuit simulation software gives researchers and industry accurate information regarding the behavior and characteristics of circuits, the auditory effect of SPICE circuit simulation on audio circuits is not well documented. This project takes a thoroughly analyzed and popular audio effect circuit called the Ibanez Tubescreamer and simulates its

While SPICE circuit simulation software gives researchers and industry accurate information regarding the behavior and characteristics of circuits, the auditory effect of SPICE circuit simulation on audio circuits is not well documented. This project takes a thoroughly analyzed and popular audio effect circuit called the Ibanez Tubescreamer and simulates its distortion effect on a .wav file in order to hear the effect of SPICE simulation. Specifically, the TS-808 schematic is drawn in the SPICE program LTSPICE and simulated using generated sinusoids and recorded .wav files. Specific components are imported using .MODEL and .SUBCKT to accurately represent the diodes, bipolar transistors, op amps, and other components in order to hear how each component affects the response. Various transient responses are extracted as .wav files and assembled as figures in order to characterize the result of the circuit on the input. Once the actual circuit is built and debugged, all of the same transient analysis is applied and then compared to the SPICE simulation figures gathered in the digital simulation. These results are then compared along with a subjective hearing test of the digital simulation and analog circuit in order to test the validity of the SPICE simulations. The digital simulations reveal that the distortion follows the signature characteristics of Ibanez Tubescreamer which shows that SPICE simulation will give insight into the real effects of audio circuits modeled in SPICE programs. Diodes--such as Silicon, Germanium, Zener, Red LEDs and Blue LEDs--can dramatically change the waveforms and sound of the inputs within the circuit where as the Op-amps--such as the JRC4558, TL072, and NE5532--have little to no effect on the waveforms and subjective effects on the output .wav files. After building the circuit and hearing the difference between the analog circuit and digital simulation, the differences between the two are apparent but very similar in nature--proving that the SPICE simulation can give meaningful insight into the sound of the actual analog circuit. Some of the differences can be explained by the variance of equipment and environment used in recording and playback. Since this project did not use high fidelity audio recording equipment and consistency in the equipment used for playback, it is uncertain if the simulation and actual circuit could be classified as completely accurate. Any further work on the project would be recording and playing back in a constant environment and looking into a wider range of specific components instead of looking into one permutation.
ContributorsMacias, Cole Thomas (Author) / Goryll, Michael (Thesis director) / Yu, Shimeng (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2015-12
Description

This report summarizes the development of a test stand used to measure the thrust or impulse of pulsed plasma thrusters (PPT). Currently, there is a lack of accessible, cost-efficient methods for measuring thrust in the market due to the difficulties associated with developing a test stand for extremely low thrust

This report summarizes the development of a test stand used to measure the thrust or impulse of pulsed plasma thrusters (PPT). Currently, there is a lack of accessible, cost-efficient methods for measuring thrust in the market due to the difficulties associated with developing a test stand for extremely low thrust outputs. Despite the difficulties, there is an ever-growing need to develop new methods of measuring thrust as the increased demand for small satellites has prompted investors from the government and private sectors to conduct further research into the development of better propulsion systems for space applications. A part of the developmental process of making propulsion systems is being able to test the thrust of these propulsion systems under vacuum conditions that simulate a space environment. This report details the research conducted on existing test stands as well as the process of designing, manufacturing, and testing a thrust measurement device.

ContributorsYu, Finley (Author) / Goryll, Michael (Thesis director) / Sharp, Thomas (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2024-05