Matching Items (803)
Filtering by

Clear all filters

149707-Thumbnail Image.png
Description
Emission of CO2 into the atmosphere has become an increasingly concerning issue as we progress into the 21st century Flue gas from coal-burning power plants accounts for 40% of all carbon dioxide emissions. The key to successful separation and sequestration is to separate CO2 directly from flue gas

Emission of CO2 into the atmosphere has become an increasingly concerning issue as we progress into the 21st century Flue gas from coal-burning power plants accounts for 40% of all carbon dioxide emissions. The key to successful separation and sequestration is to separate CO2 directly from flue gas (10-15% CO2, 70% N2), which can range from a few hundred to as high as 1000°C. Conventional microporous membranes (carbons/silicas/zeolites) are capable of separating CO2 from N2 at low temperatures, but cannot achieve separation above 200°C. To overcome the limitations of microporous membranes, a novel ceramic-carbonate dual-phase membrane for high temperature CO2 separation was proposed. The membrane was synthesized from porous La0.6Sr0.4Co0.8Fe0.2O3-d (LSCF) supports and infiltrated with molten carbonate (Li2CO3/Na2CO3/K2CO3). The CO2 permeation mechanism involves a reaction between CO2 (gas phase) and O= (solid phase) to form CO3=, which is then transported through the molten carbonate (liquid phase) to achieve separation. The effects of membrane thickness, temperature and CO2 partial pressure were studied. Decreasing thickness from 3.0 to 0.375 mm led to higher fluxes at 900°C, ranging from 0.186 to 0.322 mL.min-1.cm-2 respectively. CO2 flux increased with temperature from 700 to 900°C. Activation energy for permeation was similar to that for oxygen ion conduction in LSCF. For partial pressures above 0.05 atm, the membrane exhibited a nearly constant flux. From these observations, it was determined that oxygen ion conductivity limits CO2 permeation and that the equilibrium oxygen vacancy concentration in LSCF is dependent on the partial pressure of CO2 in the gas phase. Finally, the dual-phase membrane was used as a membrane reactor. Separation at high temperatures can produce warm, highly concentrated streams of CO2 that could be used as a chemical feedstock for the synthesis of syngas (H2 + CO). Towards this, three different membrane reactor configurations were examined: 1) blank system, 2) LSCF catalyst and 3) 10% Ni/y-alumina catalyst. Performance increased in the order of blank system < LSCF catalyst < Ni/y-alumina catalyst. Favorable conditions for syngas production were high temperature (850°C), low sweep gas flow rate (10 mL.min-1) and high methane concentration (50%) using the Ni/y-alumina catalyst.
ContributorsAnderson, Matthew Brandon (Author) / Lin, Jerry (Thesis advisor) / Alford, Terry (Committee member) / Rege, Kaushal (Committee member) / Anderson, James (Committee member) / Rivera, Daniel (Committee member) / Arizona State University (Publisher)
Created2011
150007-Thumbnail Image.png
Description
Current economic conditions necessitate the extension of service lives for a variety of aerospace systems. As a result, there is an increased need for structural health management (SHM) systems to increase safety, extend life, reduce maintenance costs, and minimize downtime, lowering life cycle costs for these aging systems. The implementation

Current economic conditions necessitate the extension of service lives for a variety of aerospace systems. As a result, there is an increased need for structural health management (SHM) systems to increase safety, extend life, reduce maintenance costs, and minimize downtime, lowering life cycle costs for these aging systems. The implementation of such a system requires a collaborative research effort in a variety of areas such as novel sensing techniques, robust algorithms for damage interrogation, high fidelity probabilistic progressive damage models, and hybrid residual life estimation models. This dissertation focuses on the sensing and damage estimation aspects of this multidisciplinary topic for application in metallic and composite material systems. The primary means of interrogating a structure in this work is through the use of Lamb wave propagation which works well for the thin structures used in aerospace applications. Piezoelectric transducers (PZTs) were selected for this application since they can be used as both sensors and actuators of guided waves. Placement of these transducers is an important issue in wave based approaches as Lamb waves are sensitive to changes in material properties, geometry, and boundary conditions which may obscure the presence of damage if they are not taken into account during sensor placement. The placement scheme proposed in this dissertation arranges piezoelectric transducers in a pitch-catch mode so the entire structure can be covered using a minimum number of sensors. The stress distribution of the structure is also considered so PZTs are placed in regions where they do not fail before the host structure. In order to process the data from these transducers, advanced signal processing techniques are employed to detect the presence of damage in complex structures. To provide a better estimate of the damage for accurate life estimation, machine learning techniques are used to classify the type of damage in the structure. A data structure analysis approach is used to reduce the amount of data collected and increase computational efficiency. In the case of low velocity impact damage, fiber Bragg grating (FBG) sensors were used with a nonlinear regression tool to reconstruct the loading at the impact site.
ContributorsCoelho, Clyde (Author) / Chattopadhyay, Aditi (Thesis advisor) / Dai, Lenore (Committee member) / Wu, Tong (Committee member) / Das, Santanu (Committee member) / Rajadas, John (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2011
149993-Thumbnail Image.png
Description
Many products undergo several stages of testing ranging from tests on individual components to end-item tests. Additionally, these products may be further "tested" via customer or field use. The later failure of a delivered product may in some cases be due to circumstances that have no correlation with the product's

Many products undergo several stages of testing ranging from tests on individual components to end-item tests. Additionally, these products may be further "tested" via customer or field use. The later failure of a delivered product may in some cases be due to circumstances that have no correlation with the product's inherent quality. However, at times, there may be cues in the upstream test data that, if detected, could serve to predict the likelihood of downstream failure or performance degradation induced by product use or environmental stresses. This study explores the use of downstream factory test data or product field reliability data to infer data mining or pattern recognition criteria onto manufacturing process or upstream test data by means of support vector machines (SVM) in order to provide reliability prediction models. In concert with a risk/benefit analysis, these models can be utilized to drive improvement of the product or, at least, via screening to improve the reliability of the product delivered to the customer. Such models can be used to aid in reliability risk assessment based on detectable correlations between the product test performance and the sources of supply, test stands, or other factors related to product manufacture. As an enhancement to the usefulness of the SVM or hyperplane classifier within this context, L-moments and the Western Electric Company (WECO) Rules are used to augment or replace the native process or test data used as inputs to the classifier. As part of this research, a generalizable binary classification methodology was developed that can be used to design and implement predictors of end-item field failure or downstream product performance based on upstream test data that may be composed of single-parameter, time-series, or multivariate real-valued data. Additionally, the methodology provides input parameter weighting factors that have proved useful in failure analysis and root cause investigations as indicators of which of several upstream product parameters have the greater influence on the downstream failure outcomes.
ContributorsMosley, James (Author) / Morrell, Darryl (Committee member) / Cochran, Douglas (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Roberts, Chell (Committee member) / Spanias, Andreas (Committee member) / Arizona State University (Publisher)
Created2011
150353-Thumbnail Image.png
Description
Advancements in computer vision and machine learning have added a new dimension to remote sensing applications with the aid of imagery analysis techniques. Applications such as autonomous navigation and terrain classification which make use of image classification techniques are challenging problems and research is still being carried out to find

Advancements in computer vision and machine learning have added a new dimension to remote sensing applications with the aid of imagery analysis techniques. Applications such as autonomous navigation and terrain classification which make use of image classification techniques are challenging problems and research is still being carried out to find better solutions. In this thesis, a novel method is proposed which uses image registration techniques to provide better image classification. This method reduces the error rate of classification by performing image registration of the images with the previously obtained images before performing classification. The motivation behind this is the fact that images that are obtained in the same region which need to be classified will not differ significantly in characteristics. Hence, registration will provide an image that matches closer to the previously obtained image, thus providing better classification. To illustrate that the proposed method works, naïve Bayes and iterative closest point (ICP) algorithms are used for the image classification and registration stages respectively. This implementation was tested extensively in simulation using synthetic images and using a real life data set called the Defense Advanced Research Project Agency (DARPA) Learning Applied to Ground Robots (LAGR) dataset. The results show that the ICP algorithm does help in better classification with Naïve Bayes by reducing the error rate by an average of about 10% in the synthetic data and by about 7% on the actual datasets used.
ContributorsMuralidhar, Ashwini (Author) / Saripalli, Srikanth (Thesis advisor) / Papandreou-Suppappola, Antonia (Committee member) / Turaga, Pavan (Committee member) / Arizona State University (Publisher)
Created2011
150398-Thumbnail Image.png
Description
Underwater acoustic communications face significant challenges unprecedented in radio terrestrial communications including long multipath delay spreads, strong Doppler effects, and stringent bandwidth requirements. Recently, multi-carrier communications based on orthogonal frequency division multiplexing (OFDM) have seen significant growth in underwater acoustic (UWA) communications, thanks to their well well-known robustness against severely

Underwater acoustic communications face significant challenges unprecedented in radio terrestrial communications including long multipath delay spreads, strong Doppler effects, and stringent bandwidth requirements. Recently, multi-carrier communications based on orthogonal frequency division multiplexing (OFDM) have seen significant growth in underwater acoustic (UWA) communications, thanks to their well well-known robustness against severely time-dispersive channels. However, the performance of OFDM systems over UWA channels significantly deteriorates due to severe intercarrier interference (ICI) resulting from rapid time variations of the channel. With the motivation of developing enabling techniques for OFDM over UWA channels, the major contributions of this thesis include (1) two effective frequencydomain equalizers that provide general means to counteract the ICI; (2) a family of multiple-resampling receiver designs dealing with distortions caused by user and/or path specific Doppler scaling effects; (3) proposal of using orthogonal frequency division multiple access (OFDMA) as an effective multiple access scheme for UWA communications; (4) the capacity evaluation for single-resampling versus multiple-resampling receiver designs. All of the proposed receiver designs have been verified both through simulations and emulations based on data collected in real-life UWA communications experiments. Particularly, the frequency domain equalizers are shown to be effective with significantly reduced pilot overhead and offer robustness against Doppler and timing estimation errors. The multiple-resampling designs, where each branch is tasked with the Doppler distortion of different paths and/or users, overcome the disadvantages of the commonly-used single-resampling receivers and yield significant performance gains. Multiple-resampling receivers are also demonstrated to be necessary for UWA OFDMA systems. The unique design effectively mitigates interuser interference (IUI), opening up the possibility to exploit advanced user subcarrier assignment schemes. Finally, the benefits of the multiple-resampling receivers are further demonstrated through channel capacity evaluation results.
ContributorsTu, Kai (Author) / Duman, Tolga M. (Thesis advisor) / Zhang, Junshan (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2011
148131-Thumbnail Image.png
Description

This case study describes an adult patient whose brachial plexus injury was treated with various modalities and exercise. The participant of this study was a 76 year old female who sustained a brachial plexus injury during an elective reverse total shoulder arthroplasty. The initial evaluation reported only passive range of

This case study describes an adult patient whose brachial plexus injury was treated with various modalities and exercise. The participant of this study was a 76 year old female who sustained a brachial plexus injury during an elective reverse total shoulder arthroplasty. The initial evaluation reported only passive range of motion with 90 degrees shoulder flexion, 85 degrees abduction, and 30 degrees external rotation. Muscle testing yielded significantly limited wrist and digit extension strength. Testing of sensation found diminished protective sensation along the median nerve distribution, including the thumb, index finger, and middle finger. Occupational therapy was initiated for postoperative treatment of the shoulder as well as treatment of the brachial plexus palsy. Therapy consisted of static splinting for healing structures and sensory reeducation through massage, finding objects with the eyes occluded, and fluidotherapy. Additionally, various exercises and modalities for improving motion and strength were initiated, including proprioceptive neuromuscular reeducation, passive/active assist/active exercises, dynamic splinting, muscle stimulation, kinesio tape, functional activities, and tendon glides. After five months, active range of motion in the shoulder, elbow, and wrist was finally achieved and median nerve sensation had improved. After nine months, elbow motion was within normal limits and wrist motion had significantly improved. Upon muscle testing, the elbow, forearm, wrist, and hand had made significant gains in strength. However, shoulder strength and motion was still limited. Overall, treatment made a significant improvement in the patient’s functionality.

ContributorsMorlock, Callista (Author) / Ramos, Christopher (Thesis director) / Thomas, Karen (Committee member) / College of Health Solutions (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
148135-Thumbnail Image.png
Description

Within the pediatric hospitalization experience, fear and anxiety are two emotions commonly felt by children of all ages. Hospitalized children can greatly benefit from interventions designed to help them cope with these emotions throughout their medical experiences. This study draws on each of our clinical experiences as volunteers at Phoenix

Within the pediatric hospitalization experience, fear and anxiety are two emotions commonly felt by children of all ages. Hospitalized children can greatly benefit from interventions designed to help them cope with these emotions throughout their medical experiences. This study draws on each of our clinical experiences as volunteers at Phoenix Children’s Hospital, and uses a qualitative analysis of three semi-structured interviews with currently employed Child Life Specialists to understand and analyze the use of medical play, a form of play intervention with a medical theme or medical equipment. We explore the goals and benefits of medical play for hospitalized pediatric patients, the process of using medical play as an intervention, including the activity design process, the assessments and adjustments made throughout the child’s hospitalization, and the considerations and limitations to implementing medical play activities. Ultimately, we found that the element of fun that defines play can be channeled into medical play activities implemented by skilled Child Life Specialists, who are experts in their field, in clinical settings to promote several different and beneficial goals, including pediatric patient coping.

ContributorsGarciapena, Danae (Co-author) / Aguiar, Lara (Co-author) / Loebenberg, Abby (Thesis director) / Swanson, Jodi (Committee member) / College of Health Solutions (Contributor) / School of Mathematical and Natural Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
147855-Thumbnail Image.png
Description

Background: The purpose of this study was to assess the efficacy of a lifestyle intervention on cardiorespiratory fitness in Latino youth with obesity and prediabetes. <br/>Methods: Participants (n=50) in this study were taken from a larger randomized controlled trial (n=180, BMI ≥ 95th percentile). Youth participated in a 6-month lifestyle

Background: The purpose of this study was to assess the efficacy of a lifestyle intervention on cardiorespiratory fitness in Latino youth with obesity and prediabetes. <br/>Methods: Participants (n=50) in this study were taken from a larger randomized controlled trial (n=180, BMI ≥ 95th percentile). Youth participated in a 6-month lifestyle intervention that included physical activity (60 minutes, 3x/week) and nutrition and wellness classes (60 minutes, 1x/week) delivered to families at the Lincoln Family YMCA in Downtown Phoenix. The primary outcome was cardiorespiratory fitness measured at baseline and post-intervention.<br/>Results: The mean BMI for the sample was 33.17 ± 4.54 kg/m2, which put the participants in the 98.4th percentile. At baseline, the mean VO2max was 2737.02 ± 488.89 mL/min. The mean relative VO2max was 30.65 ± 3.87 mL/kg/min. VO2max values significantly increased from baseline to post-intervention (2737.022 ± 483.977 mL/min vs 2932.654 ± 96.062 mL/min, p<0.001). <br/>Conclusion: Culturally-grounded, family-focused lifestyle interventions are a promising approach for improving cardiorespiratory fitness in high-risk youth at risk for diabetes.

ContributorsEstrada, Lourdes Alexa (Author) / Shaibi, Gabriel (Thesis director) / Peña, Armando (Committee member) / College of Health Solutions (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
148163-Thumbnail Image.png
Description

The following paper explores the various effects of stress on the endocrine system. Many understand that being stressed can jeopardize maintaining adequate health, but what specifically happens when humans are stressed? Why does stress affect human health? This paper delves into background information, previous research, and the depths to which

The following paper explores the various effects of stress on the endocrine system. Many understand that being stressed can jeopardize maintaining adequate health, but what specifically happens when humans are stressed? Why does stress affect human health? This paper delves into background information, previous research, and the depths to which stress negatively affects the body. The effects stress has on the endocrine system, specifically on the hypothalamic-pituitary-thyroid axis (HPT) and hypothalamic-pituitary-adrenal axis (HPA), is discussed, and additionally, at home de-stressing methods are researched. The study included a set of participants at Arizona State University. The method took place over the course of 2 weeks: one normal week, and the other with the implementation of a de-stressing method. The normal week involved the participants living their daily lives with the addition of a stress-measuring survey, while the second week involved implementing a de-stressing method and stress-measuring survey. The purpose of this study was to discover if there was a correlation between performing these relaxation activities and decreasing stress levels in ASU students. The results found that students reported they felt more relaxed and calm after the activities. Overall, this thesis provides information and first hand research on the effects of stress and stress-reducing activities and discusses the importance of maintaining lower stress levels throughout everyday life.

ContributorsWeissmann, Megan Diane (Co-author) / Gebara, Nayla (Co-author) / Don, Rachael (Thesis director) / Irving, Andrea (Committee member) / Kizer, Elizabeth (Committee member) / College of Health Solutions (Contributor) / Edson College of Nursing and Health Innovation (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
148165-Thumbnail Image.png
Description

The purpose of this Barrett Thesis Project is to review the existing literature on ACL injuries specifically regarding their risk factors, prevention, and recovery options. The content of the review has been placed into four sections: physiological factors, biomechanical factors, surgery and recovery factors, as well as training factors.

The purpose of this Barrett Thesis Project is to review the existing literature on ACL injuries specifically regarding their risk factors, prevention, and recovery options. The content of the review has been placed into four sections: physiological factors, biomechanical factors, surgery and recovery factors, as well as training factors. Physiological factors look at static structures and their impact on ACL injuries, more specifically, the role that variations on physical structure values can have on injury incidence. Biomechanical factors focus on the ways that movement can contribute to injury and the ways that incorrect movement or unanticipated movement can have on the structures of the knee. Surgery and recovery factors look at surgical techniques that have been used to correct ACL injuries and the details of their function as well as certain surgical techniques that have differing rates of success and how they can impact re-injury and rehabilitation rates. Finally, training factors analyze techniques that can be used in both pre-injury or post-injury situations therefore, this section looks at the ways that training can minimize re-injury as well as work towards preventing the initial injury. Overall, this research review looks at how these factors come together to contribute to an ACL injury and the ways that injury incidence can be minimized. Risk factors come together in order to create an undesirable situation in which the ACL ligament ruptures. These risk factors are either physiological or biomechanical in nature. As a result of injury, certain surgical techniques can be used that impact the success of a patient. Evidence for the benefit of training factors can then be applied in order to reduce injury risk or prevent future injuries.

ContributorsIsrael, Kyle (Co-author) / Fang, Charles (Co-author) / Ramos, Christopher (Thesis director) / Larson, David (Committee member) / College of Health Solutions (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05