Matching Items (117)
Description
Engineered pavements cover a large fraction of cities and offer significant potential for urban heat island mitigation. Though rapidly increasing research efforts have been devoted to the study of pavement materials, thermal interactions between buildings and the ambient environment are mostly neglected. In this study, numerical models featuring a realistic representation of building-environment thermal interactions, were applied to quantify the effect of pavements on the urban thermal environment at multiple scales. It was found that performance of pavements inside the canyon was largely determined by the canyon geometry. In a high-density residential area, modifying pavements had insignificant effect on the wall temperature and building energy consumption. At a regional scale, various pavement types were also found to have a limited cooling effect on land surface temperature and 2-m air temperature for metropolitan Phoenix. In the context of global climate change, the effect of pavement was evaluated in terms of the equivalent CO2 emission. Equivalent CO2 emission offset by reflective pavements in urban canyons was only about 13.9e46.6% of that without building canopies, depending on the canyon geometry. This study revealed the importance of building-environment thermal interactions in determining thermal conditions inside the urban canopy.
ContributorsYang, Jiachuan (Author) / Wang, Zhi-Hua (Author) / Kaloush, Kamil (Author) / Dylla, Heather (Author)
Created2016-08-22
Description
The development of stab-resistant Kevlar armor has been an ongoing field of research
since the late 1990s, with the ultimate goal of improving the multi-threat capabilities of
traditional soft-body armor while significantly improving its protective efficiency - the amount
of layers of armor material required to defeat threats. To create a novel, superior materials
system to reinforce Kevlar armor for the Norica Capstone project, this thesis set out to
synthesize, recover, and characterize zinc oxide nanowire colloids.
The materials synthesized were successfully utilized in the wider Capstone effort to
dramatically enhance the protective abilities of Kevlar, while the data obtained on the 14
hydrothermal synthesis attempts and numerous challenges at recovery provided critical
information on the synthesis parameters involved in the reliable, scalable mass production of the
nanomaterial additive. Additionally, recovery was unconventionally facilitated in the absence of
a vacuum filtration apparatus with nanoscale filters by intentionally inducing electrostatic
agglomeration of the nanowires during standard gravity filtration. The subsequent application of
these nanowires constituted a pioneering use in the production of nanowire-reinforced
STF-based Kevlar coatings, and support the future development and, ultimately, the
commercialization of lighter and more-protective soft armor systems.
since the late 1990s, with the ultimate goal of improving the multi-threat capabilities of
traditional soft-body armor while significantly improving its protective efficiency - the amount
of layers of armor material required to defeat threats. To create a novel, superior materials
system to reinforce Kevlar armor for the Norica Capstone project, this thesis set out to
synthesize, recover, and characterize zinc oxide nanowire colloids.
The materials synthesized were successfully utilized in the wider Capstone effort to
dramatically enhance the protective abilities of Kevlar, while the data obtained on the 14
hydrothermal synthesis attempts and numerous challenges at recovery provided critical
information on the synthesis parameters involved in the reliable, scalable mass production of the
nanomaterial additive. Additionally, recovery was unconventionally facilitated in the absence of
a vacuum filtration apparatus with nanoscale filters by intentionally inducing electrostatic
agglomeration of the nanowires during standard gravity filtration. The subsequent application of
these nanowires constituted a pioneering use in the production of nanowire-reinforced
STF-based Kevlar coatings, and support the future development and, ultimately, the
commercialization of lighter and more-protective soft armor systems.
ContributorsDurso, Michael Nathan (Author) / Tongay, Sefaattin (Thesis director) / Zhuang, Houlong (Committee member) / Materials Science and Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
With renewable energy on the rise, researchers have turned their funding and their focus towards new solar cell technologies, and perovskites are a major source of interest. This class of materials is particularly interesting due to their quick, simple synthesis as well as their physical and electrical superiority when compared to current silicon-based solar cells. Through this thesis, we will explore the synthesis of various types of perovskites and their subsequent characterization, which includes optical microscopy, photoluminescence spectroscopy, Raman microscopy, and X-ray diffraction. Analyzing two different perovskites both before and after a two-week period of storage revealed that while synthesis is indeed experiment-friendly, these materials have a concerning lack of stability even in ideal conditions.
ContributorsBuzas, Benjamin Joseph (Author) / Tongay, Sefaattin (Thesis director) / Muhich, Christopher (Committee member) / Materials Science and Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Fruit flies show a strong attraction to fruit odors. Most fruit odors, including strawberry scent, are complex multimolecular mixtures comprised of many chemically distinct constituents. How animals are able to process these mixtures and derive behaviorally relevant information is largely unknown. A new procedure was created to test odor preference for Heisenberg canton-s strain of Drosophila melanogaster. 30 flies were cold anesthetized at 4.2°C for 30 minutes and then placed in a testing arena. After acclimating for 45 minutes, the flies were exposed to two sources of air, one with ripe strawberry odor and one with only humidified air. Images were captured every minute for an hour and a preference index was calculated for every 10th image. The Drosophila had a positive average preference for the strawberry odor. Five out of six trials showed a general increase in odor preference over the course of the trial. While there was a generally positive trend for average preference over time, there was not a significant increase in average odor preference from time 1 to time 60. The data indicates that Drosophila show a preference for strawberry odor over humidified air, and we propose to extend this test to investigate how Drosophila process and react to complex odors and their chemical constituents.
ContributorsSteinmetz, Kyle J (Author) / Smith, Brian (Thesis director) / Jernigan, Chris (Committee member) / School of Life Sciences (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Recent data suggests that olfactory input is important for antennal lobe development in honey bees. Chronic association of a single odor to food resources during crucial stages of development results in delayed antennal lobe development for mature foraging bees. The antennal lobes of these bees instead closely resemble an immature network observed in young, newly emerged bees. Using an odor stimuli variance assay, learning and memory tests can be used to explore how well honey bees discriminate single odors within complex odor mixtures. Here we are validating two different odor mixtures, a Brassica rapa floral blend and a second replicate mixture composed of common molecularly dissimilar odors. Odors in each mixture are either held constant or varied in concentration over 16 conditioning trials. Subsequent memory tests are performed two hours later to observe the ability of bees to distinguish and recognize specific odor components in each mixture. So far in our assay we find high rates of generalization for both odor mixtures. In general, more bees responded to all odors in the replicate treatment group over the Brassica treatment group. Additionally, bees in the Brassica treatment group did not respond to the target odor. More data is being collected to validate this assay. In future studies, I propose to apply this behavioral assay to bees with an altered olfactory developmental in order to see the functional impacts of this chronic odor association treatment.
ContributorsHalby, Rachael (Author) / Smith, Brian (Thesis director) / Jernigan, Christopher (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Asperger's syndrome is a high-functioning subset of Autism Spectrum Disorders (ASD). Diagnosed patients often lack refined social skills but possess a normal level of cognitive skills without delay in language development. These deficient social skills can impact the ability to find and maintain a job, which can be burdensome for all individuals involved in the patient's life. Although the causes of this condition are largely unknown, a wide variety of social and cognitive therapies have been used to reduce symptom severity, one of which is Mindfulness-Based Stress Reduction (MBSR). Mindfulness is the act of being aware on purpose to whatever is being experienced in the present moment with non-judgment and receptivity. MBSR has been used to bring greater awareness to sensations, thoughts and emotions with the result being reduced reactivity and increased purposeful responsiveness. It is therefore the aim of this study to address the use of an 8-week Mindfulness-Based Stress Reduction in adolescents with clinical Asperger's Syndrome to reduce reactive tendencies. This study will utilize a randomized control group of waitlisted participants given MBSR informational material and a practicing MBSR group. Post-MBSR Parent Global Impressions-III (PGI-III) and Social Responsiveness Scale scores are hypothesized to be improved in MBSR group and unaffected in the control for behavioral markers with no change in core autistic symptoms. Daily average cortisol response is also expected to decrease in the experimental group with unaffected levels in the control.
ContributorsBrzezinski, Molly Alexandra (Author) / Smith, Brian (Thesis director) / Sebren, Ann (Committee member) / School of Music (Contributor) / School of Molecular Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
The mammalian olfactory system is commonly studied by using the mouse as a model system. Odor habituation is used to investigate odor perception and learning processes. Most previous experimental preparations have been tedious, requiring a researcher to manually change odorants, record investigation time and duration at each odorant, or physical alteration on the mice to enable video tracking. These limitations were overcame by creating an odorized hole-board to allow for systematic and automatic recording of olfactory behavior in mice. A cohort of five male mice were utilized in these experiments and the responses to the odor of strawberries, a diet staple of wile mice, were examined. Experiment 1 showed that free-feeding mice exhibit a preference to locations with strawberry (over control locations), even when these locations can only be identified using olfaction. This preference habituates within a trial but not across days. Experiment 2 showed that strawberry odor without reward causes habituation or extinction to the odor both within trials and across days. From these experiments, it can be concluded that mice innately explore strawberry odor and this can be exploited to the study odor habituation using an odorized hole-board.
ContributorsMa, Jason (Author) / Smith, Brian (Thesis director) / Gerkin, Richard (Committee member) / Oddo, Salvatore (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Graphene is a very strong two-dimensional material with a lot of potential applications in microelectromechanical systems (MEMS). In this research, graphene is being optimized for use in a 5 m x 5 m graphene resonator. To work properly, this graphene resonator must have a uniform strain across all manufactured devices. To reduce strain induced in graphene sheets grown for use in these resonators, evaporated platinum has been used in this investigation due to its relatively lower surface roughness compared to copper films. The final goal is to have the layer of ultrathin platinum (<=200 nm) deposited on the MEMS graphene resonator and used to grow graphene directly onto the devices to remove the manual transfer step due to its inscalability. After growth, graphene is coated with polymer and the platinum is then etched. This investigation concentrated on the transfer process of graphene onto Si/SiO2 substrate from the platinum films. It was determined that the ideal platinum etchant was aqua regia at a volumetric ratio of 6:3:1 (H2O:HCl:HNO3). This concentration was dilute enough to preserve the polymer and graphene layer, but strong enough to etch within a day. Type and thickness of polymer support layers were also investigated. PMMA at a thickness of 200 nm was ideal because it was easy to remove with acetone and strong enough to support the graphene during the etch process. A reference growth recipe was used in this investigation, but now that the transfer has been demonstrated, growth can be optimized for even thinner films.
ContributorsCayll, David Richard (Author) / Tongay, Sefaattin (Thesis director) / Lee, Hyunglae (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Animals must learn to ignore stimuli that are irrelevant to survival, a process referred to as latent inhibition. The Amtyr1 gene has been shown through quantitative trait loci mapping to be linked to strong latent inhibition in honey bees. Here we implicate this G-protein coupled receptor for the biogenic amine tyramine as an important factor underlying this form of learning in honey bees. We show that dsRNA targeted to disrupt the tyramine receptors, specifically affects latent inhibition but not excitatory associative conditioning. Our results therefore identify a distinct reinforcement pathway for latent inhibition in insects.
ContributorsPetersen, Mary Margaret (Author) / Smith, Brian (Thesis director) / Wang, Ying (Committee member) / Sinakevitch, Irina (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Solid-state lithium-ion batteries are a major area of research due to their increased safety characteristics over conventional liquid electrolyte batteries. Lithium lanthanum zirconate (LLZO) is a promising garnet-type ceramic for use as a solid-state electrolyte due to its high ionic conductivity. The material exists in two dierent phases, one that is cubic in structure and one that is tetragonal. One potential synthesis method that results in LLZO in the more useful, cubic phase, is electrospinning, where a mat of nanowires is spun and then calcined into LLZO. A phase containing lanthanum zirconate (LZO) and amorphous lithium occursas an intermediate during the calcination process. LZO has been shown to be a sintering aid for LLZO, allowing for lower sintering temperatures. Here it is shown the eects of internal LZO on the sintered pellets. This is done by varying the 700C calcination time to transform diering amounts of LZO and LLZO in electrospun nanowires, and then using the same sintering parameters for each sample. X-ray diraction was used to get structural and compositional analysis of both the calcined powders and sintered pellets. Pellets formed from wires calcined at 1 hour or longer contained only LLZO even if the calcined powder had only undergone the rst phase transformation. The relative density of the pellet with no initial LLZO of 61.0% was higher than that of the pellet with no LZO, which had a relative density of 57.7%. This allows for the same, or slightly higher, quality material to be synthesized with a shorter amount of processing time.
ContributorsLondon, Nathan Harry (Author) / Chan, Candace (Thesis director) / Tongay, Sefaattin (Committee member) / Department of Physics (Contributor) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05