Matching Items (350)
Description
This thesis focuses on the theoretical work done to determine thermodynamic properties of a chalcopyrite thin-film material for use as a photovoltaic material in a tandem device. The material of main focus here is ZnGeAs2, which was chosen for the relative abundance of constituents, favorable photovoltaic properties, and good lattice matching with ZnSnP2, the other component in this tandem device. This work is divided into two main chapters, which will cover: calculations and method to determine the formation energy and abundance of native point defects, and a model to calculate the vapor pressure over a ternary material from first-principles. The purpose of this work is to guide experimental work being done in tandem to synthesize ZnGeAs2 in thin-film form with high enough quality such that it can be used as a photovoltaic. Since properties of photovoltaic depend greatly on defect concentrations and film quality, a theoretical understanding of how laboratory conditions affect these properties is very valuable. The work done here is from first-principles and utilizes density functional theory using the local density approximation. Results from the native point defect study show that the zinc vacancy (VZn) and the germanium antisite (GeZn) are the more prominent defects; which most likely produce non-stoichiometric films. The vapor pressure model for a ternary system is validated using known vapor pressure for monatomic and binary test systems. With a valid ternary system vapor pressure model, results show there is a kinetic barrier to decomposition for ZnGeAs2.
ContributorsTucker, Jon R (Author) / Van Schilfgaarde, Mark (Thesis advisor) / Newman, Nathan (Committee member) / Adams, James (Committee member) / Arizona State University (Publisher)
Created2011
Description
This dissertation explores the interrelationships between periods of rapid social change and regional-scale social identities. Using archaeological data from the Cibola region of the U.S. Southwest, I examine changes in the nature and scale of social identification across a period of demographic and social upheaval (A.D. 1150-1325) marked by a shift from dispersed hamlets, to clustered villages, and eventually, to a small number of large nucleated towns. This transformation in settlement organization entailed a fundamental reconfiguration of the relationships among households and communities across an area of over 45,000 km2. This study draws on contemporary social theory focused on political mobilization and social movements to investigate how changes in the process of social identification can influence the potential for such widespread and rapid transformations. This framework suggests that social identification can be divided into two primary modes; relational identification based on networks of interaction among individuals, and categorical identification based on active expressions of affiliation with social roles or groups to which one can belong. Importantly, trajectories of social transformations are closely tied to the interrelationships between these two modes of identification. This study has three components: Social transformation, indicated by rapid demographic and settlement transitions, is documented through settlement studies drawing on a massive, regional database including over 1,500 sites. Relational identities, indicated by networks of interaction, are documented through ceramic compositional analyses of over 2,100 potsherds, technological characterizations of over 2,000 utilitarian ceramic vessels, and the distributions of different types of domestic architectural features across the region. Categorical identities are documented through stylistic comparisons of a large sample of polychrome ceramic vessels and characterizations of public architectural spaces. Contrary to assumptions underlying traditional approaches to social identity in archaeology, this study demonstrates that relational and categorical identities are not necessarily coterminous. Importantly, however, the strongest patterns of relational connections prior to the period of social transformation in the Cibola region largely predict the scale and structure of changes associated with that transformation. This suggests that the social transformation in the Cibola region, despite occurring in a non-state setting, was governed by similar dynamics to well-documented contemporary examples.
ContributorsPeeples, Matthew A. (Author) / Kintigh, Keith W. (Thesis advisor) / Hegmon, Michelle (Thesis advisor) / Spielmann, Katherine A. (Committee member) / Arizona State University (Publisher)
Created2011
Description
This thesis focuses on the erotic depictions of Lucretia and Susanna in Renaissance art. Both noted for displaying exemplary chastity, Lucretia and Susanna gained popularity as Christian and secular role models for women in the late Middle Ages and Renaissance. My examination of the heroines addresses the seductive portrayal of these women in painting, which seemingly contradicts the essence of their celebrity. The images specifically analyzed in this thesis include: Lucas Cranach the Elder's Lucretia from 1525, Lucretia from 1533, and Venus from 1532 as well as Tintoretto's Susanna and the Elders and Annibale Carracci's Susanna and the Elders. The scope of my thesis includes both textual and visual analyses of the myths/figures and the disparity that arises between them. Employing Lucretia and Susanna as examples, my aim is to demonstrate a subtle subversion occurring within images of powerful women that ultimately strips them of their power.
ContributorsWilliamson, Jennifer Marie (Author) / Schleif, Corine (Thesis director) / Geschwind, Rachel (Committee member) / Pratt, Rebekah (Committee member) / Barrett, The Honors College (Contributor) / School of Social Transformation (Contributor) / School of Human Evolution and Social Change (Contributor) / School of Art (Contributor)
Created2013-05
Description
Science fiction themed video games, specifically Role Playing Games (RPGs) like Deus Ex: Human Revolution (DX:HR), that focus on an emerging technology, contain features that help to better inform anticipatory governance. In a game like DX:HR, players vicariously experience human-enhancement technology and its societal effects through their in-game character. Acting as the character, the player explores the topic of human-enhancement technology in various ways, including dialogue with non-player characters (NPCs) and decisions that directly affect the game's world. Because Deus Ex: Human Revolution and games similar to it, allow players to explore and think about the technology itself, the stances on it, and its potential societal effects, they facilitate the anticipatory governance process. In this paper I postulate a theory of anticipatory gaming, which asserts that video games inform the anticipatory governance process for an emerging technology. To demonstrate this theory I examine the parts of the anticipatory governance process and demonstrate RPG's ability to inform it, through a case study of Deus Ex: Human Revolution.
ContributorsShedd, Jesse Bernard (Author) / Wetmore, Jameson (Thesis director) / Fisher, Erik (Committee member) / McKnight, John Carter (Committee member) / Barrett, The Honors College (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2013-05
Description
In this dissertation I argue that medieval peoples used a different style of identity from those applied to them by later scholarship and question the relevance of applying modern terms for identity groups (e.g., ethnicity or nationality) to the description of medieval social units. I propose we think of identity as a social construct comprised of three articulating facets, which I call: form, aspect, and definition. The form of identity is its manifestation in behavior and symbolic markers; its aspect is the perception of these forms by people; and its definition is the combination of these perceptions into a social category. Taking an interdisciplinary approach, I examine each facet individually before synthesizing the results. I study the form of identity through an analysis of styles in material culture using a consensus analysis to determine how well objects decorated with the same motif do communicating a shared idea to members of a social group. I explore the aspect of identity through a whole-corpus linguistics approach to Old English, in which I study the co-occurrence of words for "a people" and other semantic fields to refine our understanding of Old English perceptions of social identity. Finally, I investigate the definition of identity by comparing narrations of identity in Old English verse and prose in order to see how authors were able to use vocabulary and imagery to describe the identity of their subjects. In my conclusion I demonstrate that the people of Medieval England had a concept of identity based on the metaphor of a village meeting or a feast, in which smaller, innate groups were thought to aggregate into new heterogeneous wholes. The nature and scale of these groups changed over the course of the Anglo-Saxon period but some of the names used to refer to these units remained constant. Thus, I suggest scholars need to apply a culturally relevant concept of identity when describing the people who lived in Medieval Britain, one that might not match contemporary models, and be cognizant of the fact that medieval groups were not the same as their modern descendants.
ContributorsRoberts, Christopher M (Author) / Hegmon, Michelle (Thesis advisor) / Bjork, Robert (Thesis advisor) / Van Der Leeuw, Sander (Committee member) / Wicker, Nancy (Committee member) / Arizona State University (Publisher)
Created2013
Description
Electromigration in metal interconnects is the most pernicious failure mechanism in semiconductor integrated circuits (ICs). Early electromigration investigations were primarily focused on aluminum interconnects for silicon-based ICs. An alternative metallization compatible with gallium arsenide (GaAs) was required in the development of high-powered radio frequency (RF) compound semiconductor devices operating at higher current densities and elevated temperatures. Gold-based metallization was implemented on GaAs devices because it uniquely forms a very low resistance ohmic contact and gold interconnects have superior electrical and thermal conductivity properties. Gold (Au) was also believed to have improved resistance to electromigration due to its higher melting temperature, yet electromigration reliability data on passivated Au interconnects is scarce and inadequate in the literature. Therefore, the objective of this research was to characterize the electromigration lifetimes of passivated Au interconnects under precisely controlled stress conditions with statistically relevant quantities to obtain accurate model parameters essential for extrapolation to normal operational conditions. This research objective was accomplished through measurement of electromigration lifetimes of large quantities of passivated electroplated Au interconnects utilizing high-resolution in-situ resistance monitoring equipment. Application of moderate accelerated stress conditions with a current density limited to 2 MA/cm2 and oven temperatures in the range of 300°C to 375°C avoided electrical overstress and severe Joule-heated temperature gradients. Temperature coefficients of resistance (TCRs) were measured to determine accurate Joule-heated Au interconnect film temperatures. A failure criterion of 50% resistance degradation was selected to prevent thermal runaway and catastrophic metal ruptures that are problematic of open circuit failure tests. Test structure design was optimized to reduce resistance variation and facilitate failure analysis. Characterization of the Au microstructure yielded a median grain size of 0.91 ìm. All Au lifetime distributions followed log-normal distributions and Black's model was found to be applicable. An activation energy of 0.80 ± 0.05 eV was measured from constant current electromigration tests at multiple temperatures. A current density exponent of 1.91 was extracted from multiple current densities at a constant temperature. Electromigration-induced void morphology along with these model parameters indicated grain boundary diffusion is dominant and the void nucleation mechanism controlled the failure time.
ContributorsKilgore, Stephen (Author) / Adams, James (Thesis advisor) / Schroder, Dieter (Thesis advisor) / Krause, Stephen (Committee member) / Gaw, Craig (Committee member) / Arizona State University (Publisher)
Created2013
Description
The causes and consequences of stylistic change have been a concern of archaeologists over the past several decades. The actual process of stylistic innovation, however, has received less attention. This project explores the relationship between the process of stylistic innovation on decorated pottery and the social context in which it occurred in the Hohokam area of south-central Arizona between A.D. 800 and 1300. This interval was punctuated by three episodes of reorganization, each of which was characterized to varying degrees by significant shifts in ideology, economics, and politics. Each reorganization episode was also accompanied by a rapid profusion of stylistic innovation on buff ware pottery. The goal of this study was to build a framework to understand the variation in the process of innovation as a response to different incentives and opportunities perceived in the changing social environment. By bringing stylistic analyses and provenance data together for the first time in Hohokam red-on-buff studies, I investigated how the process of innovation was variously influenced by social reorganizations at three different periods of time: the 9th, 11th, and 12th centuries A.D. Four variables were used to evaluate the process of innovation at each temporal period: 1) The origin of a stylistic invention, 2) the rate of its adoption, 3) the pattern of its adoption, and 4) the uniformity of its adoption among all buff ware potting communities. To accomplish the task, stylistic innovations and provenance were recorded on over 3,700 red-on-buff sherds were analyzed from 20 sites in the Phoenix Basin. The innovation process was found to vary with each reorganization episode, but often in different ways than expected. The results revealed the complexity and unpredictability of the process of stylistic innovation among the Hohokam. They also challenged some assumptions archaeologists have made regarding the scale and extent of the changes associated with some of the reorganization episodes. The variables utilized to measure the innovation process were found to be effective at providing a composite picture of that process, and thus warrant broader application to other archaeological contexts.
ContributorsLack, Andrew D (Author) / Abbott, David R. (Thesis advisor) / Hegmon, Michelle (Committee member) / Spielmann, Katherine A. (Committee member) / Nelson, Ben A. (Committee member) / Arizona State University (Publisher)
Created2013
Description
This thesis is a qualitative research study that focuses on siblings of children with Autistic Spectrum Disorder (ASD). Even though it is expected that having a child with ASD in the family will influence the whole family including siblings of the child with ASD, the sibling population is rarely included in research related to children with ASD, and there is only limited services available for them. This exploratory study (n=6) is aimed at better understanding the siblings' lives in their family settings in order to identify the siblings' unmet needs and determine how they have been influenced by the child with ASD. This study is also aimed at identifying the most appropriate support for the siblings to help them cope better. The study followed the Resiliency Model of Family Stress, Adjustment, and Adaptation and a narrative theory approach. An in-depth interview with the parents was conducted for the study, so the findings reflect the parents' perception of the siblings. All the themes emerged into two categories: life in the family setting and supports. The findings indicate that the families are striving for balance between the siblings and the children with ASD, but still tend to focus more on the children with ASD. Also, the families tend to have autonomous personal support systems. The parents tend to perceive that these personal support systems are good enough for the siblings; therefore, the parents do not feel that formal support for the siblings was necessary. As a result of the findings, recommendations are made for the organizations that work with individuals with ASD to provide more appropriate services for the families of children with ASD, including siblings. Also, recommendations are made for future studies to clarify more factors related to the siblings due to the limitation of this study; the siblings' lives were reflected vicariously via the parents.
ContributorsJeong, Seong Hae (Author) / Marsiglia, Flavio F (Thesis advisor) / Ayers, Stephanie (Committee member) / Adams, James (Committee member) / Arizona State University (Publisher)
Created2013
Description
In this study, the researcher develops a documentary-driven methodology to understand the ways four women in the United States use their involvement in the belly dance phenomenon to shape their ongoing individual identity development. The filmmaking process itself and its efficacy as a process to promote self-understanding and identity growth among the participating belly dancers, are also investigated phenomenologically. Methodological steps taken in the documentary-driven methodology include: initial filmed interviews, co-produced filmed dance performances, editorial interviews to review footage with each dancer, documentary film production, dancer-led focus groups to screen the film, and exit interviews with each dancer. The project generates new understandings about the ways women use belly dance to shape their individual identities to include: finding community with other women in private women's spaces, embodying the music through the dance movements, and finding liberation from their everyday "selves" through costume and performance.
ContributorsWatkins, Ramsi Kathryn (Author) / Bolin, Bob (Thesis advisor) / Hegmon, Michelle (Committee member) / Hjorleifur Jonsson (Committee member) / Arizona State University (Publisher)
Created2012
Description
This report will review the mechanical and microstructural properties of the refractory element rhenium (Re) deposited using Laser Additive Manufacturing (LAM). With useable structural strength over 2200 °C, existing applications up to 2760 °C, very high strength, ductility and chemical resistance, interest in Re is understandable. This study includes data about tensile properties including tensile data up to 1925 °C, fracture modes, fatigue and microstructure including deformation systems and potential applications of that information. The bulk mechanical test data will be correlated with nanoindentation and crystallographic examination. LAM properties are compared to the existing properties found in the literature for other manufacturing processes. The literature indicates that Re has three significant slip systems but also twins as part of its deformation mechanisms. While it follows the hcp metal characteristics for deformation, it has interesting and valuable extremes such as high work hardening, potentially high strength, excellent wear resistance and superior elevated temperature strength. These characteristics are discussed in detail.
ContributorsAdams, Robbie (Author) / Chawla, Nikhilesh (Thesis advisor) / Adams, James (Committee member) / Krause, Stephen (Committee member) / Arizona State University (Publisher)
Created2012