Matching Items (1,498)
Filtering by
- Creators: Arizona State University. School of Life Sciences. Center for Biology and Society. Embryo Project Encyclopedia.
- Status: Published
Description
This thesis focuses on the theoretical work done to determine thermodynamic properties of a chalcopyrite thin-film material for use as a photovoltaic material in a tandem device. The material of main focus here is ZnGeAs2, which was chosen for the relative abundance of constituents, favorable photovoltaic properties, and good lattice matching with ZnSnP2, the other component in this tandem device. This work is divided into two main chapters, which will cover: calculations and method to determine the formation energy and abundance of native point defects, and a model to calculate the vapor pressure over a ternary material from first-principles. The purpose of this work is to guide experimental work being done in tandem to synthesize ZnGeAs2 in thin-film form with high enough quality such that it can be used as a photovoltaic. Since properties of photovoltaic depend greatly on defect concentrations and film quality, a theoretical understanding of how laboratory conditions affect these properties is very valuable. The work done here is from first-principles and utilizes density functional theory using the local density approximation. Results from the native point defect study show that the zinc vacancy (VZn) and the germanium antisite (GeZn) are the more prominent defects; which most likely produce non-stoichiometric films. The vapor pressure model for a ternary system is validated using known vapor pressure for monatomic and binary test systems. With a valid ternary system vapor pressure model, results show there is a kinetic barrier to decomposition for ZnGeAs2.
ContributorsTucker, Jon R (Author) / Van Schilfgaarde, Mark (Thesis advisor) / Newman, Nathan (Committee member) / Adams, James (Committee member) / Arizona State University (Publisher)
Created2011
Description
The purpose of our study was to examine the effectiveness of a cycling intervention on body composition in adolescents with Down syndrome (DS). Participants completed one of three interventions over eight consecutive weeks. The interventions were: 1) Voluntary Cycling (VC), in which participants cycled at their self-selected pedaling rate 2) Assisted Cycling (AC), in which the participants' voluntary pedaling rates were assisted with a motor to ensure the maintenance of 80 rpms. 3) No cycling (NC), in which the participants acted as controls. Participants in the AC intervention did not decrease body fat or increase lean body mass however they did maintain these measures during the intervention as compared to the VC and NO participants who increased body fat and decreased lean body mass. These statistics were not exactly as expected nor were they statistically significant. Future research will try to replicate this data with statistically significant values for more cycling adolescents with DS using more randomized intervention groups.
ContributorsBennett, Kristen Leigh (Author) / Ringenbach, Shannon (Thesis director) / Brown, Steven (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05
Description
This research study examined the effects of assisted cycling using a stationary recumbent bicycle that had an internal motor to help participants pedal at a desired cadence. The participants were either placed in an Assisted Cycling (AC), Voluntary Cycling (VC), or No Cycling (NC) intervention group. Those placed in the AC of VC groups then came to a laboratory setting 3 days a week for 8 weeks to cycle for 30 minutes. This research specifically analyzes the Vineland Adaptive Behavior Scale II to analyze the changes in daily living skills and maladaptive behaviors pre and post the exercise intervention. After analyzing the VABS II scores it was found that those in the VC intervention had statistically significant improvements in maladaptive behaviors. An interpretation of this finding is that the VC intervention had an increased heart rate over the span of the intervention and had a larger power output than those in the AC group. A limitation of this research is that it was a self-reported questionnaire that was given to the caregivers of the participant. The caregivers were not always controlled for, so in some cases two different caregivers were given the questionnaire for a single participant. A suggestion for future research would be to use the participant's mental age versus their chronological age when using the VABS-II and to use the Adaptive Behaviors Assessment System III (ABAS-III).
ContributorsJenkins, Cayla Marie (Author) / Ringenbach, Shannon (Thesis director) / Kulinna, Pamela (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05
Description
Electromigration in metal interconnects is the most pernicious failure mechanism in semiconductor integrated circuits (ICs). Early electromigration investigations were primarily focused on aluminum interconnects for silicon-based ICs. An alternative metallization compatible with gallium arsenide (GaAs) was required in the development of high-powered radio frequency (RF) compound semiconductor devices operating at higher current densities and elevated temperatures. Gold-based metallization was implemented on GaAs devices because it uniquely forms a very low resistance ohmic contact and gold interconnects have superior electrical and thermal conductivity properties. Gold (Au) was also believed to have improved resistance to electromigration due to its higher melting temperature, yet electromigration reliability data on passivated Au interconnects is scarce and inadequate in the literature. Therefore, the objective of this research was to characterize the electromigration lifetimes of passivated Au interconnects under precisely controlled stress conditions with statistically relevant quantities to obtain accurate model parameters essential for extrapolation to normal operational conditions. This research objective was accomplished through measurement of electromigration lifetimes of large quantities of passivated electroplated Au interconnects utilizing high-resolution in-situ resistance monitoring equipment. Application of moderate accelerated stress conditions with a current density limited to 2 MA/cm2 and oven temperatures in the range of 300°C to 375°C avoided electrical overstress and severe Joule-heated temperature gradients. Temperature coefficients of resistance (TCRs) were measured to determine accurate Joule-heated Au interconnect film temperatures. A failure criterion of 50% resistance degradation was selected to prevent thermal runaway and catastrophic metal ruptures that are problematic of open circuit failure tests. Test structure design was optimized to reduce resistance variation and facilitate failure analysis. Characterization of the Au microstructure yielded a median grain size of 0.91 ìm. All Au lifetime distributions followed log-normal distributions and Black's model was found to be applicable. An activation energy of 0.80 ± 0.05 eV was measured from constant current electromigration tests at multiple temperatures. A current density exponent of 1.91 was extracted from multiple current densities at a constant temperature. Electromigration-induced void morphology along with these model parameters indicated grain boundary diffusion is dominant and the void nucleation mechanism controlled the failure time.
ContributorsKilgore, Stephen (Author) / Adams, James (Thesis advisor) / Schroder, Dieter (Thesis advisor) / Krause, Stephen (Committee member) / Gaw, Craig (Committee member) / Arizona State University (Publisher)
Created2013
Description
This thesis is a qualitative research study that focuses on siblings of children with Autistic Spectrum Disorder (ASD). Even though it is expected that having a child with ASD in the family will influence the whole family including siblings of the child with ASD, the sibling population is rarely included in research related to children with ASD, and there is only limited services available for them. This exploratory study (n=6) is aimed at better understanding the siblings' lives in their family settings in order to identify the siblings' unmet needs and determine how they have been influenced by the child with ASD. This study is also aimed at identifying the most appropriate support for the siblings to help them cope better. The study followed the Resiliency Model of Family Stress, Adjustment, and Adaptation and a narrative theory approach. An in-depth interview with the parents was conducted for the study, so the findings reflect the parents' perception of the siblings. All the themes emerged into two categories: life in the family setting and supports. The findings indicate that the families are striving for balance between the siblings and the children with ASD, but still tend to focus more on the children with ASD. Also, the families tend to have autonomous personal support systems. The parents tend to perceive that these personal support systems are good enough for the siblings; therefore, the parents do not feel that formal support for the siblings was necessary. As a result of the findings, recommendations are made for the organizations that work with individuals with ASD to provide more appropriate services for the families of children with ASD, including siblings. Also, recommendations are made for future studies to clarify more factors related to the siblings due to the limitation of this study; the siblings' lives were reflected vicariously via the parents.
ContributorsJeong, Seong Hae (Author) / Marsiglia, Flavio F (Thesis advisor) / Ayers, Stephanie (Committee member) / Adams, James (Committee member) / Arizona State University (Publisher)
Created2013
Description
This report will review the mechanical and microstructural properties of the refractory element rhenium (Re) deposited using Laser Additive Manufacturing (LAM). With useable structural strength over 2200 °C, existing applications up to 2760 °C, very high strength, ductility and chemical resistance, interest in Re is understandable. This study includes data about tensile properties including tensile data up to 1925 °C, fracture modes, fatigue and microstructure including deformation systems and potential applications of that information. The bulk mechanical test data will be correlated with nanoindentation and crystallographic examination. LAM properties are compared to the existing properties found in the literature for other manufacturing processes. The literature indicates that Re has three significant slip systems but also twins as part of its deformation mechanisms. While it follows the hcp metal characteristics for deformation, it has interesting and valuable extremes such as high work hardening, potentially high strength, excellent wear resistance and superior elevated temperature strength. These characteristics are discussed in detail.
ContributorsAdams, Robbie (Author) / Chawla, Nikhilesh (Thesis advisor) / Adams, James (Committee member) / Krause, Stephen (Committee member) / Arizona State University (Publisher)
Created2012
Description
In 2022, integrated circuit interconnects will approach 10 nm and the diffusion barrier layers needed to ensure long lasting devices will be at 1 nm. This dimension means the interconnect will be dominated by the interface and it has been shown the interface is currently eroding device performance. The standard interconnect system has three layers - a Copper metal core, a Tantalum Adhesion layer and a Tantalum Nitride Diffusion Barrier Layer. An alternate interconnect schema is a Tantalum Nitride barrier layer and Silver as a metal. The adhesion layer is removed from the system along with changing to an alternate, low resistivity metal. First principles are used to assess the interface of the Silver and Tantalum Nitride. Several stoichiometric 1:1 Tantalum Nitride polymorphs are assessed and it is found that the Fe2P crystal structure is actually the most stable crystal structure which is at odds with the published phase diagram for ambient crystal structure. The surface stability of Fe2P-TaN is assessed and the absorption enthalpy of Silver adatoms is calculated. Finally, the thermodynamic stability of the TaN-Ag interconnect system is assessed.
ContributorsGrumski, Michael (Author) / Adams, James (Thesis advisor) / Krause, Stephen (Committee member) / Alford, Terry (Committee member) / Arizona State University (Publisher)
Created2012
Description
As world energy demands increase, research into more efficient energy production methods has become imperative. Heterogeneous catalysis and nanoscience are used to promote chemical transformations important for energy production. These concepts are important in solid oxide fuel cells (SOFCs) which have attracted attention because of their potential to provide an efficient and environmentally favorable power generation system. The SOFC is also fuel-flexible with the ability to run directly on many fuels other than hydrogen. Internal fuel reforming directly in the anode of the SOFC would greatly reduce the cost and complexity of the device. Methane is the simplest hydrocarbon and a main component in natural gas, making it useful when testing catalysts on the laboratory scale. Nickel (Ni) and gadolinium (Gd) doped ceria (CeO2) catalysts for potential use in the SOFC anode were synthesized with a spray drying method and tested for catalytic performance using partial oxidation of methane and steam reforming. The relationships between catalytic performance and structure were then investigated using X-ray diffraction, transmission electron microscopy, and environmental transmission electron microscopy. The possibility of solid solutions, segregated phases, and surface layers of Ni were explored. Results for a 10 at.% Ni in CeO2 catalyst reveal a poor catalytic behavior while a 20 at.% Ni in CeO2 catalyst is shown to have superior activity. The inclusion of both 10 at.% Gd and 10 at.% Ni in CeO2 enhances the catalytic performance. Analysis of the presence of Ni in all 3 samples reveals Ni heterogeneity and little evidence for extensive solid solution doping. Ni is found in small domains throughout CeO2 particles. In the 20 at.% Ni sample a segregated, catalytically active NiO phase is observed. Overall, it is found that significant interaction between Ni and CeO2 occurs that could affect the synthesis and functionality of the SOFC anode.
ContributorsCavendish, Rio (Author) / Crozier, Peter (Thesis advisor) / Adams, James (Committee member) / Smith, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
This research study examined the bilateral asymmetry found in muscle pairs including the right and left sides of the upper rectus abdominis, lower rectus abdominis, external oblique, and internal oblique in college-aged, apparently fit men and women. Bilateral symmetry was found using surface electromyography (EMG) during three core exercises: 1) ab-slides using paper plates (paper), 2) planks, and 3) ab-slides using a commercial AbSlide® roller device by comparing maximal voluntary contractions (MVCs) of the four muscles previously listed. This research analyzed the percentage of muscle activation during these exercises to each person’s MVC using Noraxon® software. Analysis found that asymmetry for each muscle group was present although there is no measure of clinical significance for symmetry scores of the core muscles yet.
Asymmetry scores were calculated for all three exercises. The exercise that produced the greatest absolute, average asymmetry score was the ab-slide using the roller device. The muscle that the greatest absolute asymmetry was found was the internal oblique. This means that during the three exercises and MVC, the greatest difference between right and left side pair muscles was observed in the internal obliques. The standard deviation of symmetry scores for all exercises and muscles was great as there was much variation in the skill levels in the participants of this study. Bilateral asymmetry was found by visually comparing the asymmetry scores. In conclusion, bilateral asymmetry was found in the core muscles of college-aged individuals during bilateral abdominal exercises.
Asymmetry scores were calculated for all three exercises. The exercise that produced the greatest absolute, average asymmetry score was the ab-slide using the roller device. The muscle that the greatest absolute asymmetry was found was the internal oblique. This means that during the three exercises and MVC, the greatest difference between right and left side pair muscles was observed in the internal obliques. The standard deviation of symmetry scores for all exercises and muscles was great as there was much variation in the skill levels in the participants of this study. Bilateral asymmetry was found by visually comparing the asymmetry scores. In conclusion, bilateral asymmetry was found in the core muscles of college-aged individuals during bilateral abdominal exercises.
ContributorsFavaro, Miguel Angel (Author) / Berger, Christopher (Thesis director) / Lorenz, Kent (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05
Description
This study examines cognitive planning in adolescents with Down syndrome (DS) following an 8-week assisted cycling therapy intervention. Forty-three participants were randomly assigned to assisted cycling (AC) (i.e., at least 30% faster than self-selected cadence accomplished by a motor), voluntary cycling (VC) (self-selected cadence), and no cycling (NC) control group. Both AC and VC rode a stationary bicycle three times/week, 30 minutes/session, for eight weeks in duration. Participants completed cognitive testing that assessed cognitive planning at the beginning (i.e., pretest) and end (i.e., posttest) of the 8-week intervention. Consistent with our hypothesis, the results showed that cognitive planning improved following eight weeks of cycling for the AC group. The same results were not seen for individuals in the VC or NC groups. Our results suggest that assisted cycling therapy may induce permanent changes in the prefrontal cortex in adolescents with DS.
ContributorsMillar, Kelsey Leann (Author) / Ringenbach, Shannon (Thesis director) / Amazeen, Eric (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05