Matching Items (160)
Description
The thermal conductivity of cadmium sulfide (CdS) colloidal nanocrystals (NCs) and magic-sized clusters (MSCs) have been investigated in this work. It is well documented in the literature that the thermal conductivity of colloidal nanocrystal assemblies decreases as diameter decreases. However, the extrapolation of this size dependence does not apply to magic-sized clusters. Magic-sized clusters have an anomalously high thermal conductivity relative to the extrapolated size-dependence trend line for the colloidal nanocrystals. This anomalously high thermal conductivity could probably result from the monodispersity of magic-sized clusters. To support this conjecture, a method of deliberately eliminating the monodispersity of MSCs by mixing them with colloidal nanocrystals was performed. Experiment results showed that mixtures of nanocrystals and MSCs have a lower thermal conductivity that falls approximately on the extrapolated trendline for colloidal nanocrystal thermal conductivity as a function of size.
ContributorsSun, Ming-Hsien (Author) / Wang, Robert (Thesis advisor) / Rykaczewski, Konrad (Committee member) / Wang, Liping (Committee member) / Arizona State University (Publisher)
Created2022
Description
Windows are one of the most significant locations of heat transfer through a building envelope. In warm climates, it is important that heat gain through windows is minimized. Heat transfer through a window glazing occurs by all major forms of heat transfer (convection, conduction, and radiation). Convection and conduction effects can be limited by manipulating the thermal properties of a window’s construction. However, radiation heat transfer into a building will always occur if a window glazing is visibly transparent. In an effort to reduce heat gain through the building envelope, a window glazing can be designed with spectrally selective properties. These spectrally selective glazings would possess high reflectivity in the near-infrared (NIR) regime (to prevent solar heat gain) and high emissivity in the atmospheric window, 8-13μm (to take advantage of the radiative sky cooling effect). The objective of this thesis is to provide a comprehensive study of the thermal performance of a visibly transparent, high-emissivity glass window. This research proposes a window constructed by coating soda lime glass in a dual layer consisting of Indium Tin Oxide (ITO) and Polyvinyl Fluoride (PVF) film. The optical properties of this experimental glazing were measured and demonstrated high reflectivity in the NIR regime and high emissivity in the atmospheric window. Outdoor field tests were performed to experimentally evaluate the glazing’s thermal performance. The thermal performance was assessed by utilizing an experimental setup intended to mimic a building with a skylight. The proposed glazing experimentally demonstrated reduced indoor air temperatures compared to bare glass, ITO coated glass, and PVF coated glass. A theoretical heat transfer model was developed to validate the experimental results. The results of the theoretical and experimental models showed good agreement. On average, the theoretical model demonstrated 0.44% percent error during the daytime and 0.52% percent error during the nighttime when compared to the experimentally measured temperature values.
ContributorsTrujillo, Antonio Jose (Author) / Phelan, Patrick (Thesis advisor) / Wang, Liping (Thesis advisor) / Rykaczewski, Konrad (Committee member) / Arizona State University (Publisher)
Created2022
Description
ABSTRACT Over the past several decades, the dilemma of free-roaming horses in the U.S. has proven to be one of the most divisive issues in management of public lands. According to federal land management agencies, without population regulation, horses can increase at the rate of 15-20% a year on arid rangelands with inadequate numbers of natural, large predators. Horses compete for valuable forage and water resources alongside cattle and native wildlife in delicate riparian areas highly susceptible to the negative ecological effects of soil compaction and overgrazing. Most U.S. management policies, therefore, call for increased removal of free-roaming horses as they are categorized as “un-authorized livestock” or "non-native" species. Wild horse advocates, however, continue to petition for improvement in animal welfare and expansion of the horses’ territory. With heightened social conflict spurred by animal rights and ecological concerns, not to mention the often-stark differences over what really “belongs” on the landscape, the success of appropriate management strategies hinges on managing agencies’ preparedness and ability to respond in a timely and inclusive manner. A critical element of the management context is the public’s views toward the wild horse and the science used to manage them. Synthesizing the vast literature in the history and philosophy of wildlife management in the American West, and utilizing an ethnographic and case study approach, my research examines the range of stakeholder concerns and analyzes the factors that have led to the disconnect between public values of wild horses and public policy for the management of the federally protected free-roaming horses in Arizona’s Apache-Sitgreaves National Forests.
ContributorsMurphree, Julie Joan (Author) / Minteer, Ben A. (Thesis advisor) / Schoon, Michael (Thesis advisor) / Bradshaw, Karen (Committee member) / Chew, Matthew (Committee member) / Arizona State University (Publisher)
Created2022
Description
The objective of this dissertation is to study the optical and radiative properties of inhomogeneous metallic structures. In the ongoing search for new materials with tunable optical characteristics, porous metals and nanowires provides an extensive design space to engineer its optical response based on the morphology-dependent phenomena.This dissertation firstly discusses the use of aluminum nanopillar array on a quartz substrate as spectrally selective optical filter with narrowband transmission for thermophotovoltaic systems. The narrow-band transmission enhancement is attributed to the magnetic polariton resonance between neighboring aluminum nanopillars. Tuning of the resonance wavelengths for selective filters was achieved by changing the nanopillar geometry. It concludes by showing improved efficiency of Gallium-Antimonide thermophotovoltaic system by coupling the designed filter with the cell.
Next, isotropic nanoporous gold films are investigated for applications in energy conversion and three-dimensional laser printing. The fabricated nanoporous gold samples are characterized by scanning electron microscopy, and the spectral hemispherical reflectance is measured with an integrating sphere. The effective isotropic optical constants of nanoporous gold with varying pore volume fraction are modeled using the Bruggeman effective medium theory.
Nanoporous gold are metastable and to understand its temperature dependent optical properties, a lab-scale fiber-based optical spectrometer setup is developed to characterize the in-situ specular reflectance of nanoporous gold thin films at temperatures ranging from 25 to 500 oC. The in-situ and the ex-situ measurements suggest that the
ii
specular, diffuse, and hemispherical reflectance varies as a function of temperature due to the morphology (ligament diameter) change observed.
The dissertation continues with modeling and measurements of the radiative properties of porous powders. The study shows the enhanced absorption by mixing porous copper to copper powder. This is important from the viewpoint of scalability to get end products such as sheets and tubes with the requirement of high absorptance that can be produced through three-dimensional printing.
Finally, the dissertation concludes with recommendations on the methods to fabricate the suggested optical filters to improve thermophotovoltaic system efficiencies. The results presented in this dissertation will facilitate not only the manufacturing of materials but also the promising applications in solar thermal energy and optical systems.
ContributorsRamesh, Rajagopalan (Author) / Wang, Liping (Thesis advisor) / Azeredo, Bruno (Thesis advisor) / Phelan, Patrick (Committee member) / Yu, Hongbin (Committee member) / Rykaczewski, Konrad (Committee member) / Arizona State University (Publisher)
Created2022
Description
Communications around sustainability have been found to be incongruent with eliciting the transformative change required to address global climate change and its' repercussions. Recent research has been exploring storytelling in sustainability, specifically with an emphasis on reflexive and emancipatory methods. These methods encourage embracing and contextualizing complexity and intend to target entire cognitive hierarchies. This study explores the possibility of using emancipatory and reflexive storytelling as a tool to change attitudes pertaining to the Valley Metro Light Rail, an example of a complex sustainability mitigation effort. I explore this in four steps: 1) Conducted a pre-survey to gauge preexisting attitudes and predispositions; 2) Provided a narrative that uses storytelling methodologies of reflexivity and emancipation through a story about the light rail; 3) Conducted a post-survey to gauge attitude shift resulting from the narrative intervention; 4) Facilitated a focus group discussion to examine impact qualitatively. These steps intended to provide an answer to the question: How does emancipatory and reflexive storytelling impact affective, cognitive and conative attitudes regarding local alternative transportation? By using tripartite attitude model, qualitative and quantitative analysis this paper determines that reflexive and emancipatory storytelling impacts attitudinal structures. The impact is marginal in the survey response, though the shift indicated a narrowing of participant responses towards one another, indicative of participants subscribing to emancipation and reflexivity of their held attitudes. From the group discussion, it was evident from qualitative responses that participants engaged in emancipating themselves from their held attitudes and reflected upon them. In doing so they engaged in collaboration to make suggestions and suggest actions to help those with experiences that differed from their own. Though this research doesn’t provide conclusive evidence, it opens the door for future research to assess these methodologies as a tool to elicit shared values, beliefs and norms, which are necessary for collective action leading to transformative change in response to global climate change.
ContributorsSwanson, Jake Ryan (Author) / Roseland, Mark (Thesis advisor) / Larson, Kelli (Committee member) / Calhoun, Craig (Committee member) / Schoon, Michael (Committee member) / Arizona State University (Publisher)
Created2023
Description
Energy storage technologies are essential to overcome the temporal variability in renewable energy. The primary aim of this thesis is to develop reactor solutions to better analyze the potential of thermochemical energy storage (TCES) using non-stoichiometric metal oxides, for the multi-day energy storage application. A TCES system consists of a reduction reactor and an insulated MOx storage bin. The reduction reactor heats (to ~ 1100 °C) and partially reduces the MOx, thereby adding sensible and chemical energy (i.e., charging it) under reduced pO2 environments (~10 Pa). Inert gas removes the oxygen generated during reduction. The storage bin holds the hot and partially reduced MOx (typically particles) until it is used in an energy recovery device (i.e., discharge). Irrespective of the reactor heat source (here electrical), or the particle-inert gas flows (here countercurrent), the thermal reduction temperature and inert gas (here N2) flow minimize when the process approaches reversibility, i.e., operates near equilibrium. This study specifically focuses on developing a reduction reactor based on the theoretical considerations for approaching reversibility along the reaction path. The proposed Zigzag flow reactor (ZFR) is capable of thermally reducing CAM28 particles at temperatures ~ 1000 °C under an O2 partial pressure ~ 10 Pa. The associated analytical and numerical models analyze the reaction equilibrium under a real (discrete) reaction path and the mass transfer kinetic conditions necessary to approach equilibrium. The discrete equilibrium model minimizes the exergy destroyed in a practical reactor and identifies methods of maximizing the energy storage density () and the exergetic efficiency. The mass transfer model analyzes the O2 N2 concentration boundary layers to recommend sizing considerations to maximize the reactor power density. Two functional ZFR prototypes, the -ZFR and the -ZFR, establish the proof of concept and achieved a reduction extent, Δδ = 0.071 with CAM28 at T~950 °C and pO2 = 10 Pa, 7x higher than a previous attempt in the literature. The -ZFR consistently achieved > 100 Wh/kg during >10 h. runtime and the -ZFR displayed an improved = 130 Wh/kg during >5 h. operation with CAM28. A techno-economic model of a grid-scale ZFR with an associated storage bin analyzes the cost of scaling the ZFR for grid energy storage requirements. The scaled ZFR capital costs contribute < 1% to the levelized cost of thermochemical energy storage, which ranges from 5-20 ¢/kWh depending on the storage temperature and storage duration.
ContributorsGhotkar, Rhushikesh (Author) / Milcarek, Ryan (Thesis advisor) / Ermanoski, Ivan (Committee member) / Phelan, Patrick (Committee member) / Wang, Liping (Committee member) / Wang, Robert (Committee member) / Arizona State University (Publisher)
Created2023
Description
Understanding the dynamic interactions between humans and wildlife is essential to establishing sustainable wildlife-based ecotourism (WBE). Animal behavior exists within a complex feedback loop that affects overall ecosystem function, tourist satisfaction, and socioeconomics of local communities. However, the specific value that animal behavior plays in provisioning ecosystem services has not been thoroughly evaluated. People enjoy activities that facilitate intimate contact with animals, and there are many perceived benefits associated with these experiences, such as encouraging pro-environmental attitudes that can lead to greater motivation for conservation. There is extensive research on the effects that unregulated tourism activity can have on wildlife behavior, which include implications for population health and survival. Prior to COVID-19, WBE was developing rapidly on a global scale, and the pause in activity caused by the pandemic gave natural systems the chance to recover from environmental damage from over-tourism and provided insights into how tourism could be less impactful in the future. Until now it has been undetermined how changes in animal behavior can alter the relationships and socioeconomics of this multidimensional system. This dissertation provides a thorough exploration of the behavioral, ecological, and economic parameters required to model biosocial interactions and feedbacks within the whale watching system in Las Perlas Archipelago, Panama. Through observational data collected in the field, this project assessed how unmanaged whale watching activity is affecting the behavior of Humpback whales in the area as well as the socioeconomic and conservation contributions of the industry. Additionally, it is necessary to consider what a sustainable form of wildlife tourism might be, and whether the incorporation of technology will help enhance visitor experience while reducing negative impacts on wildlife. To better ascertain whether this concept of this integration would be favorably viewed, a sample of individuals was surveyed about their experiences about using technology to enhance their interactions with nature. This research highlights the need for more deliberate identification and incorporation of the perceptions of all stakeholders (wildlife included) to develop a less-impactful WBE industry that provides people with opportunities to establish meaningful relationships with nature that motivate them to help meet the conservation challenges of today.
ContributorsSurrey, Katie (Author) / Gerber, Leah (Thesis advisor) / Guzman, Hector (Committee member) / Minteer, Ben (Committee member) / Schoon, Michael (Committee member) / Arizona State University (Publisher)
Created2023
Description
A well-insulated dark conventional rooftop can be hotter than any other urban surface, including pavements. Since rooftops cover around 20 – 25% of most urban areas, their role in the urban heat island effect is significant. In general, buildings exchange heat with the surroundings in three ways: heat release from the cooling/heating system, air exchange associated with exfiltration and relief air, and heat transfer between the building envelope and surroundings. Several recent studies show that the building envelope generates more heat release into the environment than any other building component.Current advancements in material science have enabled the development of materials and coatings with very high solar reflectance and thermal emissivity, and that can alter their radiative properties based on surface temperature. This dissertation is an effort to quantify the impact of recent developments in such technologies on urban air. The current study addresses three specific unresolved topics: 1) the relative importance of rooftop solar reflectance and thermal emissivity, 2) the role of rooftop radiative properties in different climates, and 3) the impact of temperature-adaptive exterior materials/coatings on building energy savings and urban cooling. The findings from this study show that the use of rooftop materials with solar reflectance above 0.9 maintain the surface temperature below ambient air temperature most of the time, even when the materials have conventional thermal emissivity (0.9). This research has demonstrated that for hot cities, rooftops with high solar reflectance and thermal emittance maximize building energy savings and always cool the surrounding air. For moderate climate regions, high solar reflectance and low thermal emittance result in the greatest building energy cost savings. This combination of radiative properties cools the air during the daytime and warms it at night. Finally, this research found that temperature-adaptive materials could play a significant role in reducing utility costs for poorly insulated buildings, but that they heat the surrounding air in the winter, irrespective of the rooftop insulation.
Through the detailed analysis of building façade radiative properties, this dissertation offers climate-specific design guidance that can be used to simultaneously optimize energy costs while minimizing adverse warming of the surrounding environment.
ContributorsPrem Anand Jayaprabha, Jyothis Anand (Author) / Sailor, David (Thesis advisor) / Phelan, Patrick (Thesis advisor) / Huang, Huei-Ping (Committee member) / Wang, Liping (Committee member) / Yeom, Dongwoo Jason (Committee member) / Arizona State University (Publisher)
Created2022
Description
Siloxane, a common contaminant present in biogas, is known for adverse effects on cogeneration prime movers. In this work, the solid oxide fuel cell (SOFC) nickel-yttria stabilized zirconia (Ni-YSZ) anode degradation due to poisoning by siloxane was investigated. For this purpose, experiments with different fuels, different deposition substrate materials, different structure of contamination siloxane (cyclic and linear) and entire failure process are conducted in this study. The electrochemical and material characterization methods, such as Electrochemical Impedance Spectroscopy (EIS), Scanning Electron Microscope- Wavelength Dispersive Spectrometers (SEM-WDS), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and Raman spectroscopy, were applied to investigate the anode degradation behavior. The electrochemical characterization results show that the SOFCs performance degradation caused by siloxane contamination is irreversible under bio-syngas condition. An equivalent circuit model (ECM) is developed based on electrochemical characterization results. Based on the Distribution of Relaxation Time (DRT) method, the detailed microstructure parameter changes are evaluated corresponding to the ECM results. The results contradict the previously proposed siloxane degradation mechanism as the experimental results show that water can inhibit anode deactivation. For anode materials, Ni is considered a major factor in siloxane deposition reactions in Ni-YSZ anode. Based on the results of XPS, XRD and WDS analysis, an initial layer of carbon deposition develops and is considered a critical process for the siloxane deposition reaction. Based on the experimental results in this study and previous studies about siloxane deposition on metal oxides, the proposed siloxane deposition process occurs in stages consisting of the siloxane adsorption, initial carbon deposition, siloxane polymerization and amorphous silicon dioxide deposition.
ContributorsTian, Jiashen (Author) / Milcarek, Ryan J. (Thesis advisor) / Muhich, Christopher (Committee member) / Wang, Liping (Committee member) / Phelan, Patrick (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2022
Description
The space industry is rapidly expanding, and components are getting increasinglysmaller leading to the prominence of cubesats. Cubesats are satellites from about coffee
mug size to cereal box size. The challenges of shortened timeline and smaller budgets for
smaller spacecraft are also their biggest advantages. This benefits educational missions
and industry missions a like but can burden teams to be smaller or have less experience.
Thermal analysis of cubesats is no exception to these burdens which is why this thesis
has been written to provide a guide for conducting the thermal analysis of a cubesat using
the Deployable Optical Receiver Aperture (DORA) mission as an example. Background
on cubesats and their role in the space industry will be examined. The theoretical side of
heat transfer necessary for conducting a thermal analysis will be explored. The DORA
thermal analysis will then be conducted by constructing a thermal model in Thermal
Desktop software from the ground up. Insight to assumptions for model construction to
move accurately yet quickly will be detailed. Lastly, this fast and quick method will be
compared to a standard finite element mesh model to show quality results can be
achieved in significantly less time.
ContributorsAdkins, Matthew Thomas (Author) / Phelan, Patrick (Thesis advisor) / Jacobs, Danny (Thesis advisor) / Wang, Liping (Committee member) / Bowman, Judd (Committee member) / Arizona State University (Publisher)
Created2022