Matching Items (52)
Filtering by

Clear all filters

129669-Thumbnail Image.png
Description

Nitrogen availability and cell density each affects growth and cellular astaxanthin content of Haematococcus pluvialis, but possible combined effects of these two factors on the content and productivity of astaxanthin, especially under outdoor culture conditions, is less understood. In this study, the effects of the initial biomass densities IBDs of

Nitrogen availability and cell density each affects growth and cellular astaxanthin content of Haematococcus pluvialis, but possible combined effects of these two factors on the content and productivity of astaxanthin, especially under outdoor culture conditions, is less understood. In this study, the effects of the initial biomass densities IBDs of 0.1, 0.5, 0.8, 1.5, 2.7, 3.5, and 5.0 g L-1 DW and initial nitrogen concentrations of 0, 4.4, 8.8, and 17.6 mM nitrate on growth and cellular astaxanthin content of H. pluvialis Flotow K-0084 were investigated in outdoor glass column photobioreactors in a batch culture mode. A low IBD of 0.1 g L-1 DW led to photo-bleaching of the culture within 1-2 days. When the IBD was 0.5 g L-1 and above, the rate at which the increase in biomass density and the astaxanthin content on a per cell basis was higher at lower IBD. When the IBD was optimal (i.e., 0.8 g L-1), the maximum astaxanthin content of 3.8% of DW was obtained in the absence of nitrogen, whereas the maximum astaxanthin productivity of 16.0 mg L-1 d(-1) was obtained in the same IBD culture containing 4.4 mM nitrogen. The strategies for achieving maximum Haematococcus biomass productivity and for maximum cellular astaxanthin content are discussed.

ContributorsWang, Junfeng (Author) / Sommerfeld, Milton (Author) / Lu, Congming (Author) / Hu, Qiang (Author) / Julie Ann Wrigley Global Institute of Sustainability (Contributor)
Created2013-08-30
128018-Thumbnail Image.png
Description

Background: Multiple methods are employed for modeling adaptation when projecting the impact of climate change on heat-related mortality. The sensitivity of impacts to each is unknown because they have never been systematically compared. In addition, little is known about the relative sensitivity of impacts to “adaptation uncertainty” (i.e., the inclusion/exclusion

Background: Multiple methods are employed for modeling adaptation when projecting the impact of climate change on heat-related mortality. The sensitivity of impacts to each is unknown because they have never been systematically compared. In addition, little is known about the relative sensitivity of impacts to “adaptation uncertainty” (i.e., the inclusion/exclusion of adaptation modeling) relative to using multiple climate models and emissions scenarios.

Objectives: This study had three aims: a) Compare the range in projected impacts that arises from using different adaptation modeling methods; b) compare the range in impacts that arises from adaptation uncertainty with ranges from using multiple climate models and emissions scenarios; c) recommend modeling method(s) to use in future impact assessments.

Methods: We estimated impacts for 2070–2099 for 14 European cities, applying six different methods for modeling adaptation; we also estimated impacts with five climate models run under two emissions scenarios to explore the relative effects of climate modeling and emissions uncertainty.

Results: The range of the difference (percent) in impacts between including and excluding adaptation, irrespective of climate modeling and emissions uncertainty, can be as low as 28% with one method and up to 103% with another (mean across 14 cities). In 13 of 14 cities, the ranges in projected impacts due to adaptation uncertainty are larger than those associated with climate modeling and emissions uncertainty.

Conclusions: Researchers should carefully consider how to model adaptation because it is a source of uncertainty that can be greater than the uncertainty in emissions and climate modeling. We recommend absolute threshold shifts and reductions in slope.

ContributorsGosling, Simon N. (Author) / Hondula, David M. (Author) / Bunker, Aditi (Author) / Ibarreta, Dolores (Author) / Liu, Junguo (Author) / Zhang, Xinxin (Author) / Sauerborn, Rainer (Author) / College of Liberal Arts and Sciences (Contributor)
Created2017-08-16
128090-Thumbnail Image.png
Description

Background: Environmental heat exposure is a public health concern. The impacts of environmental heat on mortality and morbidity at the population scale are well documented, but little is known about specific exposures that individuals experience.

Objectives: The first objective of this work was to catalyze discussion of the role of personal

Background: Environmental heat exposure is a public health concern. The impacts of environmental heat on mortality and morbidity at the population scale are well documented, but little is known about specific exposures that individuals experience.

Objectives: The first objective of this work was to catalyze discussion of the role of personal heat exposure information in research and risk assessment. The second objective was to provide guidance regarding the operationalization of personal heat exposure research methods.

Discussion: We define personal heat exposure as realized contact between a person and an indoor or outdoor environment that poses a risk of increases in body core temperature and/or perceived discomfort. Personal heat exposure can be measured directly with wearable monitors or estimated indirectly through the combination of time–activity and meteorological data sets. Complementary information to understand individual-scale drivers of behavior, susceptibility, and health and comfort outcomes can be collected from additional monitors, surveys, interviews, ethnographic approaches, and additional social and health data sets. Personal exposure research can help reveal the extent of exposure misclassification that occurs when individual exposure to heat is estimated using ambient temperature measured at fixed sites and can provide insights for epidemiological risk assessment concerning extreme heat.

Conclusions: Personal heat exposure research provides more valid and precise insights into how often people encounter heat conditions and when, where, to whom, and why these encounters occur. Published literature on personal heat exposure is limited to date, but existing studies point to opportunities to inform public health practice regarding extreme heat, particularly where fine-scale precision is needed to reduce health consequences of heat exposure.

ContributorsKuras, Evan (Author) / Richardson, Molly B. (Author) / Calkins, Miriam M. (Author) / Ebi, Kristie L. (Author) / Hess, Jeremy J. (Author) / Kintziger, Kristina W. (Author) / Jagger, Meredith A. (Author) / Middel, Ariane (Author) / Scott, Anna A. (Author) / Spector, June T. (Author) / Uejio, Christopher K. (Author) / Vanos, Jennifer K. (Author) / Zaitchik, Benjamin F. (Author) / Gohlke, Julia M. (Author) / Hondula, David M. (Author) / College of Public Service and Community Solutions (Contributor)
Created2017-08-01
128015-Thumbnail Image.png
Description

Background: Extreme heat is a leading weather-related cause of illness and death in many locations across the globe, including subtropical Australia. The possibility of increasingly frequent and severe heat waves warrants continued efforts to reduce this health burden, which could be accomplished by targeting intervention measures toward the most vulnerable

Background: Extreme heat is a leading weather-related cause of illness and death in many locations across the globe, including subtropical Australia. The possibility of increasingly frequent and severe heat waves warrants continued efforts to reduce this health burden, which could be accomplished by targeting intervention measures toward the most vulnerable communities.

Objectives: We sought to quantify spatial variability in heat-related morbidity in Brisbane, Australia, to highlight regions of the city with the greatest risk. We also aimed to find area-level social and environmental determinants of high risk within Brisbane.

Methods: We used a series of hierarchical Bayesian models to examine city-wide and intracity associations between temperature and morbidity using a 2007–2011 time series of geographically referenced hospital admissions data. The models accounted for long-term time trends, seasonality, and day of week and holiday effects.

Results: On average, a 10°C increase in daily maximum temperature during the summer was associated with a 7.2% increase in hospital admissions (95% CI: 4.7, 9.8%) on the following day. Positive statistically significant relationships between admissions and temperature were found for 16 of the city’s 158 areas; negative relationships were found for 5 areas. High-risk areas were associated with a lack of high income earners and higher population density.

Conclusions: Geographically targeted public health strategies for extreme heat may be effective in Brisbane, because morbidity risk was found to be spatially variable. Emergency responders, health officials, and city planners could focus on short- and long-term intervention measures that reach communities in the city with lower incomes and higher population densities, including reduction of urban heat island effects.

Created2014-08-01
127858-Thumbnail Image.png
Description

Background: While there is ample evidence for health risks associated with heat and other extreme weather events today, little is known about the impact of weather patterns on population health in preindustrial societies.

Objective: To investigate the impact of weather patterns on population health in Sweden before and during industrialization.

Methods: We

Background: While there is ample evidence for health risks associated with heat and other extreme weather events today, little is known about the impact of weather patterns on population health in preindustrial societies.

Objective: To investigate the impact of weather patterns on population health in Sweden before and during industrialization.

Methods: We obtained records of monthly mortality and of monthly mean temperatures and precipitation for Skellefteå parish, northern Sweden, for the period 1800-1950. The associations between monthly total mortality, as well as monthly mortality due to infectious and cardiovascular diseases, and monthly mean temperature and cumulative precipitation were modelled using a time series approach for three separate periods, 1800−1859, 1860-1909, and 1910-1950.

Results: We found higher temperatures and higher amounts of precipitation to be associated with lower mortality both in the medium term (same month and two-months lag) and in the long run (lag of six months up to a year). Similar patterns were found for mortality due to infectious and cardiovascular diseases. Furthermore, the effect of temperature and precipitation decreased over time.

Conclusions: Higher temperature and precipitation amounts were associated with reduced death counts with a lag of up to 12 months. The decreased effect over time may be due to improvements in nutritional status, decreased infant deaths, and other changes in society that occurred in the course of the demographic and epidemiological transition.

Contribution: The study contributes to a better understanding of the complex relationship between weather and mortality and, in particular, historical weather-related mortality.

ContributorsDaniel, Oudin Astrom (Author) / Edvinsson, Soren (Author) / Hondula, David M. (Author) / Rocklov, Joacim (Author) / Schumann, Barbara (Author) / College of Liberal Arts and Sciences (Contributor)
Created2016-10-05
127874-Thumbnail Image.png
Description

The lack of lipidome analytical tools has limited our ability to gain new knowledge about lipid metabolism in microalgae, especially for membrane glycerolipids. An electrospray ionization mass spectrometry-based lipidomics method was developed for Nannochloropsis oceanica IMET1, which resolved 41 membrane glycerolipids molecular species belonging to eight classes. Changes in membrane

The lack of lipidome analytical tools has limited our ability to gain new knowledge about lipid metabolism in microalgae, especially for membrane glycerolipids. An electrospray ionization mass spectrometry-based lipidomics method was developed for Nannochloropsis oceanica IMET1, which resolved 41 membrane glycerolipids molecular species belonging to eight classes. Changes in membrane glycerolipids under nitrogen deprivation and high-light (HL) conditions were uncovered. The results showed that the amount of plastidial membrane lipids including monogalactosyldiacylglycerol, phosphatidylglycerol, and the extraplastidic lipids diacylglyceryl-O-4′-(N, N, N,-trimethyl) homoserine and phosphatidylcholine decreased drastically under HL and nitrogen deprivation stresses. Algal cells accumulated considerably more digalactosyldiacylglycerol and sulfoquinovosyldiacylglycerols under stresses. The genes encoding enzymes responsible for biosynthesis, modification and degradation of glycerolipids were identified by mining a time-course global RNA-seq data set. It suggested that reduction in lipid contents under nitrogen deprivation is not attributable to the retarded biosynthesis processes, at least at the gene expression level, as most genes involved in their biosynthesis were unaffected by nitrogen supply, yet several genes were significantly up-regulated. Additionally, a conceptual eicosapentaenoic acid (EPA) biosynthesis network is proposed based on the lipidomic and transcriptomic data, which underlined import of EPA from cytosolic glycerolipids to the plastid for synthesizing EPA-containing chloroplast membrane lipids.

ContributorsHan, Danxiang (Author) / Jia, Jing (Author) / Li, Jing (Author) / Sommerfeld, Milton (Author) / Xu, Jian (Author) / Hu, Qiang (Author) / College of Liberal Arts and Sciences (Contributor)
Created2017-08-04
128527-Thumbnail Image.png
Description

Asteroids provide fundamental clues to the formation and evolution of planetesimals. Collisional models based on the depletion of the primordial main belt of asteroids predict 10–15 craters >400 km should have formed on Ceres, the largest object between Mars and Jupiter, over the last 4.55 Gyr. Likewise, an extrapolation from the asteroid

Asteroids provide fundamental clues to the formation and evolution of planetesimals. Collisional models based on the depletion of the primordial main belt of asteroids predict 10–15 craters >400 km should have formed on Ceres, the largest object between Mars and Jupiter, over the last 4.55 Gyr. Likewise, an extrapolation from the asteroid Vesta would require at least 6–7 such basins. However, Ceres’ surface appears devoid of impact craters >∼280 km. Here, we show a significant depletion of cerean craters down to 100–150 km in diameter. The overall scarcity of recognizable large craters is incompatible with collisional models, even in the case of a late implantation of Ceres in the main belt, a possibility raised by the presence of ammoniated phyllosilicates. Our results indicate that a significant population of large craters has been obliterated, implying that long-wavelength topography viscously relaxed or that Ceres experienced protracted widespread resurfacing.

ContributorsMarchi, S. (Author) / Ermakov, A. I. (Author) / Raymond, C. A. (Author) / Fu, R. R. (Author) / O'Brien, D. P. (Author) / Bland, M. T. (Author) / Ammannito, E. (Author) / De Sanctis, M. C. (Author) / Bowling, T. (Author) / Schenk, P. (Author) / Scully, J. E. C. (Author) / Buczkowski, D. L. (Author) / Williams, David (Author) / Hiesinger, H. (Author) / Russell, C. T. (Author) / College of Liberal Arts and Sciences (Contributor)
Created2016-07-26
126596-Thumbnail Image.png
Description

Society is heavily dependent on a reliable electric supply; all infrastructure systems depend on electricity to operate. When the electric system fails, the impacts can be catastrophic (food spoilage, inoperable medical devices, lack of access to water, etc.). The social impacts, defined as the direct and indirect impacts on people,

Society is heavily dependent on a reliable electric supply; all infrastructure systems depend on electricity to operate. When the electric system fails, the impacts can be catastrophic (food spoilage, inoperable medical devices, lack of access to water, etc.). The social impacts, defined as the direct and indirect impacts on people, of power outages must be explored as the likelihood of power outages and blackouts are increasing. However, compared to other hazards, such as heat and flooding, the knowledge base on the impacts of power outages is relatively small. The purpose of this thesis is to identify what is currently known about the social impacts of power outages, identify where gaps in the literature exist, and deploy a survey to explore power outage experiences at the household level. This thesis is comprised of two chapters, a systematic literature review on the current knowledge of the social impacts of power outages and a multi-city survey focused on power outage experiences.

The first chapter comprised of a systematic literature review using a combined search of in Scopus which returned 762 candidate articles were identified that potentially explored the social impacts of power outages. However, after multiple filtering criteria were applied, only 45 articles met all criteria. Four themes were used to classify the literature, not exclusively, including modeling, social, technical, and other. Only papers that were classified as “social” - meaning they observed how people were affected by a power outage - or in combination with other categories were used within the review.

From the literature, populations of concern were identified, including minority demographics - specifically Blacks or African Americans, children, elderly, and rural populations. The most commonly reported health concerns were from those that rely on medical devices for chronic conditions and unsafe generator practices. Criminal activity was also reported to increase during prolonged power outages and can be mitigated by consistent messaging on where to receive assistance and when power will be restored. Providing financial assistance and resources such as food and water can reduce the crime rate temporarily, but the crime rate can be expected to increase once the relief expires. Authorities should expect looting to occur, especially in poorer areas, during prolonged power outages. Gaps in the literature were identified and future directions for research were provided.

The second chapter consists of a multi-city survey that targeted three major cities across the United States (Detroit, MI; Miami, FL; and Phoenix, AZ). The survey was disseminated through Amazon’s Mechanical Turk and hosted by Qualtrics. 896 participants from the three cities qualified to complete the full version of the survey. Three criteria had to be met for participants to complete the full survey including residing in one of the three target cities, living at their primary address for a majority of the year, and indicate they had experienced a power outage within the last five years.

Participants were asked questions regarding the number of outages experienced in the last five years, the length of their most recent and longest outage experienced, if they owned a generator, how they managed their longest power outage, if participants or anyone in their household relies on a medical device, the financial burden their power outage caused, and standard demographic- and income-related questions. Race was a significant variable that influenced the outage duration length but not frequency in Phoenix and Detroit. Income was not a significant variable associated with experiencing greater economic impacts, such as having thrown food away because of an outage and not receiving help during the longest outage. Additional assessments similar to this survey are needed to better understand household power outage experiences.

Findings from this thesis demonstrate traditional metrics used in vulnerability indices were not indicative of who experienced the greatest effects of power outages. Additionally, other factors that are not included in these indices, such as owning adaptive resources including medical devices and generators in Phoenix and Detroit, are factors in reducing negative outcomes. More research is needed on this topic to indicate which populations are more likely to experience factors that can influence positive or negative outage outcomes.

ContributorsAndresen, Adam (Author) / Hondula, David M. (Contributor, Contributor) / Gall, Melanie (Contributor) / Meerow, Sara (Contributor)
Created2020-07-20
128669-Thumbnail Image.png
Description

The production, characterization, and antioxidant capacity of the carotenoid fucoxanthin from the marine diatom Odontella aurita were investigated. The results showed that low light and nitrogen-replete culture medium enhanced the biosynthesis of fucoxanthin. The maximum biomass concentration of 6.36 g L-1 and maximum fucoxanthin concentration of 18.47 mg g-1 were

The production, characterization, and antioxidant capacity of the carotenoid fucoxanthin from the marine diatom Odontella aurita were investigated. The results showed that low light and nitrogen-replete culture medium enhanced the biosynthesis of fucoxanthin. The maximum biomass concentration of 6.36 g L-1 and maximum fucoxanthin concentration of 18.47 mg g-1 were obtained in cultures grown in a bubble column photobioreactor (Ø 3.0 cm inner diameter), resulting in a fucoxanthin volumetric productivity of 7.96 mg L-1 day-1. A slight reduction in biomass production was observed in the scaling up of O. aurita culture in a flat plate photobioreactor, yet yielded a comparable fucoxanthin volumetric productivity. A rapid method was developed for extraction and purification of fucoxanthin. The purified fucoxanthin was identified as all-trans-fucoxanthin, which exhibited strong antioxidant properties, with the effective concentration for 50% scavenging (EC50) of 1,1-dihpenyl-2-picrylhydrazyl (DPPH) radical and 2,2′-Azino-bis(3-ethylbenzthiazoline-6-sulfonic acid (ABTS) radical being 0.14 and 0.03 mg mL-1, respectively. Our results suggested that O. aurita can be a natural source of fucoxanthin for human health and nutrition.

ContributorsXia, Song (Author) / Wang, Ke (Author) / Wan, Linglin (Author) / Li, Aifen (Author) / Hu, Qiang (Author) / Zhang, Chengwu (Author) / Julie Ann Wrigley Global Institute of Sustainability (Contributor)
Created2013-07-23
136221-Thumbnail Image.png
Description

Maricopa County is the home of the Phoenix metropolitan area, an expansive city with serious air quality concerns. To ameliorate air quality in the county, the Maricopa County Air Quality Department developed a website and mobile application called "Clean Air Make More" as a means of outreach and engagement. In

Maricopa County is the home of the Phoenix metropolitan area, an expansive city with serious air quality concerns. To ameliorate air quality in the county, the Maricopa County Air Quality Department developed a website and mobile application called "Clean Air Make More" as a means of outreach and engagement. In doing this, the county has found a way to engender a bilateral relationship between individuals and their government agency. This study analyzes the effectiveness of Clean Air Make More in establishing this relationship and engaging the community in efforts to improve air quality. It concludes that the design of the application effectively meets user needs, but marketing efforts should target populations disposed to taking action regarding air quality.

ContributorsLapoint, Maggie Lane (Author) / Johnston, Erik W., 1977- (Thesis director) / Hondula, David M. (Committee member) / Barrett, The Honors College (Contributor) / W. P. Carey School of Business (Contributor) / School of International Letters and Cultures (Contributor)
Created2015-05