Matching Items (280)
Filtering by

Clear all filters

129233-Thumbnail Image.png
Description

Most previous works on complete synchronization of chaotic oscillators focused on the one-channel interaction scheme where the oscillators are coupled through only one variable or a symmetric set of variables. Using the standard framework of master-stability function (MSF), we investigate the emergence of complex synchronization behaviors under all possible configurations

Most previous works on complete synchronization of chaotic oscillators focused on the one-channel interaction scheme where the oscillators are coupled through only one variable or a symmetric set of variables. Using the standard framework of master-stability function (MSF), we investigate the emergence of complex synchronization behaviors under all possible configurations of two-channel coupling, which include, for example, all possible cross coupling schemes among the dynamical variables. Utilizing the classic Rössler and Lorenz oscillators, we find a rich variety of synchronization phenomena not present in any previously extensively studied, single-channel coupling configurations. For example, in many cases two coupling channels can enhance or even generate synchronization where there is only weak or no synchronization under only one coupling channel, which has been verified in a coupled neuron system. There are also cases where the oscillators are originally synchronized under one coupling channel, but an additional synchronizable coupling channel can, however, destroy synchronization. Direct numerical simulations of actual synchronization dynamics verify the MSF-based predictions. Our extensive computation and heuristic analysis provide an atlas for synchronization of chaotic oscillators coupled through two channels, which can be used as a systematic reference to facilitate further research in this area.

ContributorsYang, Wenchao (Author) / Huang, Zi-Gang (Author) / Wang, Xingang (Author) / Huang, Liang (Author) / Yang, Lei (Author) / Lai, Ying-Cheng (Author) / Ira A. Fulton Schools of Engineering (Contributor)
Created2015-02-18
Description

Most current approaches for quantification of RNA species in their natural spatial contexts in single cells are limited by a small number of parallel analyses. Here we report a strategy to dramatically increase the multiplexing capacity for RNA analysis in single cells in situ. In this method, transcripts are detected

Most current approaches for quantification of RNA species in their natural spatial contexts in single cells are limited by a small number of parallel analyses. Here we report a strategy to dramatically increase the multiplexing capacity for RNA analysis in single cells in situ. In this method, transcripts are detected by fluorescence in situ hybridization (FISH). After imaging and data storage, the fluorescence signal is efficiently removed by photobleaching. This enables the reinitiation of FISH to detect other RNA species in the same cell. Through reiterative cycles of hybridization, imaging and photobleaching, the identities, positions and copy numbers of a large number of varied RNA species can be quantified in individual cells in situ. Using this approach, we analyzed seven different transcripts in single HeLa cells with five reiterative RNA FISH cycles. This approach has the potential to detect over 100 varied RNA species in single cells in situ, which will have wide applications in studies of systems biology, molecular diagnosis and targeted therapies.

ContributorsXiao, Lu (Author) / Guo, Jia (Author) / Department of Chemistry and Biochemistry (Contributor)
Created2015-04-29
156155-Thumbnail Image.png
Description
This work demonstrates a capable reverse pulse deposition methodology to influence gap fill behavior inside microvia along with a uniform deposit in the fine line patterned regions for substrate packaging applications. Interconnect circuitry in IC substrate packages comprises of stacked microvia that varies in depth from 20µm to 100µm with

This work demonstrates a capable reverse pulse deposition methodology to influence gap fill behavior inside microvia along with a uniform deposit in the fine line patterned regions for substrate packaging applications. Interconnect circuitry in IC substrate packages comprises of stacked microvia that varies in depth from 20µm to 100µm with an aspect ratio of 0.5 to 1.5 and fine line patterns defined by photolithography. Photolithography defined pattern regions incorporate a wide variety of feature sizes including large circular pad structures with diameter of 20µm - 200µm, fine traces with varying widths of 3µm - 30µm and additional planar regions to define a IC substrate package. Electrodeposition of copper is performed to establish the desired circuit. Electrodeposition of copper in IC substrate applications holds certain unique challenges in that they require a low cost manufacturing process that enables a void-free gap fill inside the microvia along with uniform deposition of copper on exposed patterned regions. Deposition time scales to establish the desired metal thickness for such packages could range from several minutes to few hours. This work showcases a reverse pulse electrodeposition methodology that achieves void-free gap fill inside the microvia and uniform plating in FLS (Fine Lines and Spaces) regions with significantly higher deposition rates than traditional approaches. In order to achieve this capability, systematic experimental and simulation studies were performed. A strong correlation of independent parameters that govern the electrodeposition process such as bath temperature, reverse pulse plating parameters and the ratio of electrolyte concentrations is shown to the deposition kinetics and deposition uniformity in fine patterned regions and gap fill rate inside the microvia. Additionally, insight into the physics of via fill process is presented with secondary and tertiary current simulation efforts. Such efforts lead to show “smart” control of deposition rate at the top and bottom of via to avoid void formation. Finally, a parametric effect on grain size and the ensuing copper metallurgical characteristics of bulk copper is also shown to enable high reliability substrate packages for the IC packaging industry.
ContributorsGanesan, Kousik (Author) / Tasooji, Amaneh (Thesis advisor) / Manepalli, Rahul (Committee member) / Alford, Terry (Committee member) / Chan, Candace (Committee member) / Arizona State University (Publisher)
Created2018
128213-Thumbnail Image.png
Description

The notable increase in biofuel usage by the road transportation sector in Brazil during recent years has significantly altered the vehicular fuel composition. Consequently, many uncertainties are currently found in particulate matter vehicular emission profiles. In an effort to better characterise the emitted particulate matter, measurements of aerosol physical and

The notable increase in biofuel usage by the road transportation sector in Brazil during recent years has significantly altered the vehicular fuel composition. Consequently, many uncertainties are currently found in particulate matter vehicular emission profiles. In an effort to better characterise the emitted particulate matter, measurements of aerosol physical and chemical properties were undertaken inside two tunnels located in the São Paulo Metropolitan Area (SPMA). The tunnels show very distinct fleet profiles: in the Jânio Quadros (JQ) tunnel, the vast majority of the circulating fleet are light duty vehicles (LDVs), fuelled on average with the same amount of ethanol as gasoline. In the Rodoanel (RA) tunnel, the particulate emission is dominated by heavy duty vehicles (HDVs) fuelled with diesel (5% biodiesel). In the JQ tunnel, PM2.5 concentration was on average 52 μg m-3, with the largest contribution of organic mass (OM, 42%), followed by elemental carbon (EC, 17%) and crustal elements (13%). Sulphate accounted for 7% of PM2.5 and the sum of other trace elements was 10%. In the RA tunnel, PM2.5 was on average 233 μg m-3, mostly composed of EC (52%) and OM (39%). Sulphate, crustal and the trace elements showed a minor contribution with 5%, 1%, and 1%, respectively. The average OC : EC ratio in the JQ tunnel was 1.59 ± 0.09, indicating an important contribution of EC despite the high ethanol fraction in the fuel composition. In the RA tunnel, the OC : EC ratio was 0.49 ± 0.12, consistent with previous measurements of diesel-fuelled HDVs. Besides bulk carbonaceous aerosol measurement, polycyclic aromatic hydrocarbons (PAHs) were quantified. The sum of the PAHs concentration was 56 ± 5 ng m-3 and 45 ± 9 ng m-3 in the RA and JQ tunnel, respectively. In the JQ tunnel, benzo(a)pyrene (BaP) ranged from 0.9 to 6.7 ng m-3 (0.02–0.1‰ of PM2.5)] whereas in the RA tunnel BaP ranged from 0.9 to 4.9 ng m-3 (0.004–0. 02‰ of PM2.5), indicating an important relative contribution of LDVs emission to atmospheric BaP.

ContributorsBrito, J. (Author) / Rizzo, L. V. (Author) / Herckes, Pierre (Author) / Vasconcellos, P. C. (Author) / Caumo, S. E. S. (Author) / Fornaro, A. (Author) / Ynoue, R. Y. (Author) / Artaxo, P. (Author) / Andrade, M. F. (Author) / Department of Chemistry and Biochemistry (Contributor)
Created2013-12-17
128196-Thumbnail Image.png
Description

About 2.5 × 106 snapshots on microcrystals of photoactive yellow protein (PYP) from a recent serial femtosecond crystallographic (SFX) experiment were reanalyzed to maximum resolution. The resolution is pushed to 1.46 Å, and a PYP structural model is refined at that resolution. The result is compared to other PYP models determined

About 2.5 × 106 snapshots on microcrystals of photoactive yellow protein (PYP) from a recent serial femtosecond crystallographic (SFX) experiment were reanalyzed to maximum resolution. The resolution is pushed to 1.46 Å, and a PYP structural model is refined at that resolution. The result is compared to other PYP models determined at atomic resolution around 1 Å and better at the synchrotron. By comparing subtleties such as individual isotropic temperature factors and hydrogen bond lengths, we were able to assess the quality of the SFX data at that resolution. We also show that the determination of anisotropic temperature factor ellipsoids starts to become feasible with the SFX data at resolutions better than 1.5 Å.

ContributorsSchmidt, Marius (Author) / Pande, Kanupriya (Author) / Basu, Shibom (Author) / Tenboer, Jason (Author) / Department of Chemistry and Biochemistry (Contributor)
Created2015-05-15
128669-Thumbnail Image.png
Description

The production, characterization, and antioxidant capacity of the carotenoid fucoxanthin from the marine diatom Odontella aurita were investigated. The results showed that low light and nitrogen-replete culture medium enhanced the biosynthesis of fucoxanthin. The maximum biomass concentration of 6.36 g L-1 and maximum fucoxanthin concentration of 18.47 mg g-1 were

The production, characterization, and antioxidant capacity of the carotenoid fucoxanthin from the marine diatom Odontella aurita were investigated. The results showed that low light and nitrogen-replete culture medium enhanced the biosynthesis of fucoxanthin. The maximum biomass concentration of 6.36 g L-1 and maximum fucoxanthin concentration of 18.47 mg g-1 were obtained in cultures grown in a bubble column photobioreactor (Ø 3.0 cm inner diameter), resulting in a fucoxanthin volumetric productivity of 7.96 mg L-1 day-1. A slight reduction in biomass production was observed in the scaling up of O. aurita culture in a flat plate photobioreactor, yet yielded a comparable fucoxanthin volumetric productivity. A rapid method was developed for extraction and purification of fucoxanthin. The purified fucoxanthin was identified as all-trans-fucoxanthin, which exhibited strong antioxidant properties, with the effective concentration for 50% scavenging (EC50) of 1,1-dihpenyl-2-picrylhydrazyl (DPPH) radical and 2,2′-Azino-bis(3-ethylbenzthiazoline-6-sulfonic acid (ABTS) radical being 0.14 and 0.03 mg mL-1, respectively. Our results suggested that O. aurita can be a natural source of fucoxanthin for human health and nutrition.

ContributorsXia, Song (Author) / Wang, Ke (Author) / Wan, Linglin (Author) / Li, Aifen (Author) / Hu, Qiang (Author) / Zhang, Chengwu (Author) / Julie Ann Wrigley Global Institute of Sustainability (Contributor)
Created2013-07-23
128683-Thumbnail Image.png
Description

Unidirectional glass fiber reinforced polymer (GFRP) is tested at four initial strain rates (25, 50, 100 and 200 s-1) and six temperatures (−25, 0, 25, 50, 75 and 100 °C) on a servo-hydraulic high-rate testing system to investigate any possible effects on their mechanical properties and failure patterns. Meanwhile, for

Unidirectional glass fiber reinforced polymer (GFRP) is tested at four initial strain rates (25, 50, 100 and 200 s-1) and six temperatures (−25, 0, 25, 50, 75 and 100 °C) on a servo-hydraulic high-rate testing system to investigate any possible effects on their mechanical properties and failure patterns. Meanwhile, for the sake of illuminating strain rate and temperature effect mechanisms, glass yarn samples were complementally tested at four different strain rates (40, 80, 120 and 160 s-1) and varying temperatures (25, 50, 75 and 100 °C) utilizing an Instron drop-weight impact system. In addition, quasi-static properties of GFRP and glass yarn are supplemented as references. The stress–strain responses at varying strain rates and elevated temperatures are discussed. A Weibull statistics model is used to quantify the degree of variability in tensile strength and to obtain Weibull parameters for engineering applications.

ContributorsOu, Yunfu (Author) / Zhu, Deju (Author) / Zhang, Huaian (Author) / Huang, Liang (Author) / Yao, Yiming (Author) / Li, Gaosheng (Author) / Mobasher, Barzin (Author) / Ira A. Fulton Schools of Engineering (Contributor)
Created2016-05-19
136176-Thumbnail Image.png
Description
Joseph Rotblat (1908-2005) was the only physicist to leave the Manhattan Project for moral reasons before its completion. He would spend the rest of his life advocating for nuclear disarmament. His activities for disarmament resulted in the formation, in 1957, of the Pugwash conferences, which emerged as the leading global

Joseph Rotblat (1908-2005) was the only physicist to leave the Manhattan Project for moral reasons before its completion. He would spend the rest of his life advocating for nuclear disarmament. His activities for disarmament resulted in the formation, in 1957, of the Pugwash conferences, which emerged as the leading global forum to advance limits on nuclear weapons during the Cold War. Rotblat's efforts, and the activities of Pugwash, resulted in both being awarded the Nobel Peace Prize in 1995. Rotblat is a central figure in the global history of resistance to the spread of nuclear weapons. He also was an important figure in the emergence, after World War II, of a counter-movement to introduce new social justifications for scientific research and new models for ethics and professionalism among scientists. Rotblat embodies the power of the individual scientist to say "no" and thus, at least individually, put limits of conscience on his or her scientific activity. This paper explores the political and ethical choices scientists make as part of their effort to behave responsibly and to influence the outcomes of their work. By analyzing three phases of Rotblat's life, I demonstrate how he pursued his ideal of beneficial science, or science that appears to benefit humanity. The three phases are: (1) his decision to leave the Manhattan Project in 1944, (2) his role in the creation of Pugwash in 1957 and his role in the rise of the organization into international prominence and (3) his winning the Nobel Peace Prize in 1995. These three phases of Rotblat's life provide a singular window of the history of nuclear weapons and the international movement for scientific responsibility in the 50 years since the bombing of Hiroshima in 1945. While this paper does not provide a complete picture of Rotblat's life and times, I argue that his experiences shed important light on the difficult question of the individual responsibility of scientists.
ContributorsEvans, Alison Dawn (Author) / Zachary, Gregg (Thesis director) / Hurlbut, Ben (Committee member) / Francis, Sybil (Committee member) / Barrett, The Honors College (Contributor) / Department of Chemistry and Biochemistry (Contributor) / School of Historical, Philosophical and Religious Studies (Contributor)
Created2015-05
136177-Thumbnail Image.png
Description
The purpose of this study was to determine the ratio of vegetable to fruit incorporated during a fresh vegetable and/or fruit juice diet. Juicing is the process of extracting the liquid part of a plant, fruit, or vegetable. Food can be ground, pressed, and spun to separate the liquid from

The purpose of this study was to determine the ratio of vegetable to fruit incorporated during a fresh vegetable and/or fruit juice diet. Juicing is the process of extracting the liquid part of a plant, fruit, or vegetable. Food can be ground, pressed, and spun to separate the liquid from the pulp. A juice diet involves juicing and consuming a variety of vegetables and fruits. The primary objective of this study was to gather information about the ratio of vegetable to fruit incorporated in freshly made juices during a juice diet. Therefore, the study survey inquired about various topics related to ingredient ratio during a juice diet. The survey data allowed for examination of the relationships between ingredient ratio and certain variables (e.g. gender, age, length of time juicing, juice fast participation, health effects, etc.). The study participants were recruited using online social media. Facebook was the primary method for reaching the online juicing community. A written invitation was distributed in several health related Facebook groups encouraging any person with experience juicing to complete an anonymous survey. This post was also shared via Twitter and various health related websites. The study survey data was used to examine the relationships between ingredient ratio and specific variables. The survey data showed participants had varying levels of experience with juicing. The responses indicated many participants were familiar with juice fasting and many participants completed more than one juice fast. Based on the survey response data, the most common ratio of vegetable to fruit incorporated by the participants during a juice diet was 80% vegetable to 20% fruit. The majority of participants indicated daily consumption of freshly made juice containing 70% -100% vegetables. Based on the survey response data, beginner juicers may be less inclined to incorporate organic produce into their juice diet compared to advanced juicers. The majority of participants reported positive health benefits during a juice diet. Some of the positive health benefits indicated by participants include weight loss, increased energy, and a positive impact on disease symptoms. Some of the negative side effects experienced by participants during a juice diet include frequent urination, headache, and cravings. Cross tabulation calculations between the ratio of ingredients and several variables covered by the study survey demonstrated statistical significance (i.e. length of time juicing, frequency of drinking juice, juice fast participation, number of juice fasts completed, servings of vegetables/fruit in a juice, percent of organic vegetables/fruit used in a juice, perceived positive side effects, and perceived negative side effects). This study provided insight about the average ratio of vegetable to fruit incorporated by participants during a juice diet. When analyzing the data it is important to consider the survey data was self-reported. Therefore, every result and conclusion is based on the individual perceptions of the study participants. In future experimentation, the use of medical tests and blood work would be useful to determine the biological and biochemical effects of drinking raw vegetable and/or fruit juice on the human body.
ContributorsMata, Sara Ann (Author) / Mayol-Kreiser, Sandra (Thesis director) / Shepard, Christina (Committee member) / Barrett, The Honors College (Contributor) / Department of Chemistry and Biochemistry (Contributor)
Created2015-05
141495-Thumbnail Image.png
Description

The electronic structure of eight zinc-centered porphyrin macrocyclic molecules are investigated using density functional theory for ground-state properties, time-dependent density functional theory (TDDFT) for excited states, and Franck-Condon (FC) analysis for further characterization of the UV-vis spectrum. Symmetry breaking was utilized to find the lowest energy of the excited states

The electronic structure of eight zinc-centered porphyrin macrocyclic molecules are investigated using density functional theory for ground-state properties, time-dependent density functional theory (TDDFT) for excited states, and Franck-Condon (FC) analysis for further characterization of the UV-vis spectrum. Symmetry breaking was utilized to find the lowest energy of the excited states for many states in the spectra. To confirm the theoretical modeling, the spectroscopic result from zinc phthalocyanine (ZnPc) is used to compare to the TDDFT and FC result. After confirmation of the modeling, five more planar molecules are investigated: zinc tetrabenzoporphyrin (ZnTBP), zinc tetrabenzomonoazaporphyrin (ZnTBMAP), zinc tetrabenzocisdiazaporphyrin (ZnTBcisDAP), zinc tetrabenzotransdiazaporphyrin (ZnTBtransDAP), and zinc tetrabenzotriazaporphyrin (ZnTBTrAP). The two latter molecules are then compared to their phenylated sister molecules: zinc monophenyltetrabenzotriazaporphyrin (ZnMPTBTrAP) and zinc diphenyltetrabenzotransdiazaporphyrin (ZnDPTBtransDAP). The spectroscopic results from the synthesis of ZnMPTBTrAP and ZnDPTBtransDAP are then compared to their theoretical models and non-phenylated pairs. While the Franck-Condon results were not as illuminating for every B-band, the Q-band results were successful in all eight molecules, with a considerable amount of spectral analysis in the range of interest between 300 and 750 nm. The π-π* transitions are evident in the results for all of the Q bands, while satellite vibrations are also visible in the spectra. In particular, this investigation finds that, while ZnPc has a D4h symmetry at ground state, a C4v symmetry is predicted in the excited-state Q band region. The theoretical results for ZnPc found an excitation energy at the Q-band 0-0 transition of 1.88 eV in vacuum, which is in remarkable agreement with published gas-phase spectroscopy, as well as our own results of ZnPc in solution with Tetrahydrofuran that are provided in this paper.

ContributorsTheisen, Rebekah (Author) / Huang, Liang (Author) / Fleetham, Tyler (Author) / Adams, James (Author) / Li, Jian (Author) / Ira A. Fulton Schools of Engineering (Contributor)
Created2015-03-07