Matching Items (110)
Filtering by
Description
In injection molded plastic parts, knit lines occur where opposing streams of material fuse together while the mold cavity fills. When parts with knit lines experience external loading, the knit lines cause areas of mechanical weakness. This weakness is especially drastic in fiber-reinforced polymers due to an unfavorable orientation of fibers at the knit line. A possible way to reduce the impact of knit lines is to incorporate overflow tabs into the mold design. An overflow tab is a chamber attached to the mold cavity that provides an extra space for the end of material flow to occur. Research shows that overflow tabs improve the fiber orientation at the knit line, resulting in increased mechanical strength. The goal of this study is to utilize overflow tabs to optimize the knit line strength of nylon 6-6 that is 30% carbon fiber reinforced. In this project, an initial overflow tab is first designed. Then four modifications are made to the tab design, each altering a separate variable while holding the others constant. The design changes explored for the tab in this project include adding radii to the inlet, shifting the inlet location, increasing the inlet cross-sectional area by 50%, and increasing the tab chamber volume by 50%. Specimens were molded using the initial tab design and the modified tab designs. Testing for this experiment consists of three specimens of each type for three-point bending tests, and five specimens of each type for tensile tests. The material properties analyzed are the flexural modulus, flexural strength, tensile modulus, and tensile strength. From the testing, the tab with the 50% increased volume consistently yielded the highest results and showed large improvement from the initial tab design. However, the other three tab modifications either showed negative change or slight improvement from the initial tab design. Based on the results of this study, the overflow tab volume is the most beneficial design parameter to adjust.
ContributorsJones, Justin Michael (Author) / Adams, James (Thesis director) / Wamsley, Steven (Committee member) / Computer Science and Engineering Program (Contributor) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
The purpose of this honors project is to analyze the difference between different powder separation techniques, and their suitability for my capstone project – ‘Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity’. Due to the nature of my capstone project, my group needs to characterize foreign contaminants in IN 718 (Ni-based superalloy) powder with a mean diameter around 40um. In order to clearly analyze the contaminants and recycle useful IN 718 powders, powder separation is favorable since the filtered samples will be much easier to characterize rather than inspect all the powders at once under microscope. By conducting literature review, I found that powder separation is commonly used in Geology, and Chemistry department. To screen which combination of techniques could be the best for my project, I have consulted several research specialists, obtained adequate knowledge about powder separation. Accordingly, I will summarize the pros and cons of each method with regard the specific project that I am working on, and further explore the impacts of each method under economical, societal, and environmental considerations. Several powder separation techniques will be discussed in details in the following sections, including water elutriation, settling column, magnetic separation and centrifugation. In addition to these methods, sieving, water tabling and panning will be briefly introduced. After detailed comparison, I found that water elutriation is the most efficient way to purity IN718 powder for reuse purpose, and recovery rate is as high as 70%, which could result in a significant reduction in the manufacturing cost for Honeywell since currently Honeywell only use virgin powders to build parts, and 90% of the leftover powders are discarded.
ContributorsLuo, Zheyu (Author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Honeywell is currently extending the reach of additive manufacturing (AM) in its product line and expects to produce as much as 40% of its inventory through AM in five years. Additive manufacturing itself is expected to grow into a $3.1 billion dollar industry in the next 5 to 10 years. Reusing IN 718 powder, a nickel-based super alloy metal powder, is an ideal option to reduce costs as well as reduce waste because it can be used with additive manufacturing, but the main obstacles are lack of procedure standardization and product quality assurances from this process. The goal of the capstone project, "Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity," is to create a powder characterization protocol in order to determine if the IN 718 powder can be reused and what effect the IN 718 reused powder has on the mechanical properties of the products Honeywell fabricates. To provide context and impact of this capstone project, this paper serves to identify the benefits of AM for Honeywell and the cost effectiveness of reusing the powder versus using virgin powder every time. It was found that Honeywell's investment in AM is due to the cost effectiveness of AM, versatility in product design, and to ensure Honeywell remains competitive in the future. In terms of reducing expenses, reusing powder enables costs to be approximately 45% less than using virgin powder. With these key pieces of information, the motivations for this capstone project are understood to a fuller and more profound degree.
ContributorsQuigley, Elizabeth (Co-author) / Luo, Zheyu (Co-author) / Murella, Anoosha (Co-author) / Lee, Wey Lyn (Co-author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Arizona and Florida are unique venues are they are the only two locations in the world to host the preseason leagues known as Spring Training for all thirty Major League Baseball teams. With fan bases willing to travel and spend disposable income to follow their favorite teams and/or escape the cold spells of their home state, the sports and tourism industries in Arizona and Florida have been able to captivate a status as top spring destinations. This study takes a focus on the economic impact that Spring Training in March has on the state of Arizona; specifically the Phoenix Metropolitan area. Consumer research is presented and a SWOT analysis is generated to further assess the condition of the Cactus League and Arizona as a host state. An economic impact study driven by the Strengths, Weaknesses, Opportunities & Threats (SWOT) analysis method is the primary focuses of research due to the sum and quality of usable data that can be organized using the SWOT structure. The scope of this research aims to support the argument that Spring Training impacts the host city in which it resides in. In conjunction with the SWOT analysis, third parties will be able to get a sense of the overall effectiveness and impact of Cactus League Spring Training in the Valley of the Sun. Integration of findings from a Tampa Bay sight visit will also be assessed to determine the health of the competition. This study will take an interdisciplinary approach as it views the topics at hand from the lenses of the consumer, baseball professional, and investor.
ContributorsOlden, Kyle (Co-author) / Farmer, James (Co-author) / Eaton, John (Thesis director) / Mokwa, Michael (Committee member) / T. Denny Sanford School of Social and Family Dynamics (Contributor) / College of Public Service and Community Solutions (Contributor) / Department of Information Systems (Contributor) / Department of Economics (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Autism Spectrum Disorder is a disorder that makes learning, socializing and daily living much more challenging for affected children and adults because of their atypical behaviors. A few examples of these behaviors are repetitive movements, impulsive actions, inability to communicate in a social setting, and many more. There is a stigma behind autism that is caused by those who are not well informed on the disorder. These people lack information, and in the past, it was assumed that the disorder is caused by "bad parenting." The parents are then afraid of social shame brought upon them by their child and neglect or avoid a diagnosis for their child's disorder. This becomes a vicious cycle that has negative effects on the affected individuals and their loved ones. Neglect of a diagnosis may also be caused by misinformation interpreted by the parents as their child develops. The parents do not realize this child developing outside of normal behavioral patterns. Years of research have been done to attempt to alleviate the symptoms of autism and cure the disorder. The Autism and Asperger's Program at ASU has developed a year-long dietary plan that increases supplementation to alleviate nutritional deficiencies in participants with autism. These deficiencies include vitamins, minerals, essential fatty acids, sulfate, carnitine, and digestive enzymes such as sucrase, maltase, and lactase. The participants were also put on a gluten-free casein-free diet toward the end of the study. To test the effectiveness of the treatment, the Severity of Autism Scale (SAS) and Social Responsiveness Scales (SRS) were used. The SAS tested the overall severity of ASD participants by rating them from one to ten, ten being "very severe" in terms of ASD symptoms. The results of this scale were compared at the beginning of the study (day 0) and at the end of the study (day 365). The SRS tested the social responsiveness of participants in the form of overall SRS and five subscales that included awareness, cognition, communication, motivation, and mannerisms. These results were also compared at the beginning and end of the study. After analysis of the data, there seemed to be no correlation between age and severity of autism/social responsiveness of participants. There was also no statistically significant data to suggest that there was a correlation between gender and severity of autism/social responsiveness of participants. However, there was statistically significant evidence that the treatment group did improve over the non-treatment/delayed treatment group in both the SAS and SRS. Neither age nor gender had a significant effect on the effectiveness of the treatment. These positive findings suggest that the integrated dietary
utritional therapy was beneficial, and future research on dietary treatments for autism and other disorders is recommended. This may also further discoveries of affected epigenomes with regards to nutritional treatments in disorders like ASD. The epigenome is the methylation and demethylation of the genome that mediates gene expression.
utritional therapy was beneficial, and future research on dietary treatments for autism and other disorders is recommended. This may also further discoveries of affected epigenomes with regards to nutritional treatments in disorders like ASD. The epigenome is the methylation and demethylation of the genome that mediates gene expression.
ContributorsGutgsell, Crystal Megan (Author) / Adams, James (Thesis director) / Pollard, Elena (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
This study investigates how the patient-provider relationship between lesbian, gay, and bisexual women and their healthcare providers influences their access to, utilization of, and experiences within healthcare environments. Nineteen participants, ages 18 to 34, were recruited using convenience and snowball sampling. Interviews were conducted inquiring about their health history and their experiences within the healthcare system in the context of their sexual orientation. The data collected from these interviews was used to create an analysis of the healthcare experiences of those who identify as queer. Although the original intention of the project was to chronicle the experiences of LGB women specifically, there were four non-binary gender respondents who contributed interviews. In an effort to not privilege any orientation over another, the respondents were collectively referred to as queer, given the inclusive and an encompassing nature of the term. The general conclusion of this study is that respondents most often experienced heterosexism rather than outright homophobia when accessing healthcare. If heterosexism was present within the healthcare setting, it made respondents feel uncomfortable with their providers and less likely to inform them of their sexuality even if it was medically relevant to their health outcomes. Gender, race, and,socioeconomic differences also had an effect on the patient-provider relationship. Non-binary respondents acknowledged the need for inclusion of more gender options outside of male or female on the reporting forms often seen in medical offices. By doing so, medical professionals are acknowledging their awareness and knowledge of people outside of the binary gender system, thus improving the experience of these patients. While race and socioeconomic status were less relevant to the context of this study, it was found that these factors have an affect on the patient-provider relationship. There are many suggestions for providers to improve the experiences of queer patients within the healthcare setting. This includes nonverbal indications of acknowledgement and acceptance, such as signs in the office that indicate it to be a queer friendly space. This will help in eliminating the fear and miscommunication that can often happen when a queer patient sees a practitioner for the first time. In addition, better education on medically relevant topics to queer patients, is necessary in order to eliminate disparities in health outcomes. This is particularly evident in trans health, where specialized education is necessary in order to decrease poor health outcomes in trans patients. Future directions of this study necessitate a closer look on how race and socioeconomic status have an effect on a queer patient's relationship with their provider.
ContributorsRajan, Sindhu (Co-author) / Bradley, Arianna (Co-author) / Larson, Michelle (Co-author) / Alvarado, Aimee (Co-author) / Ingram-Waters, Mary (Thesis director) / Arnold, Michelle (Committee member) / School of Molecular Sciences (Contributor) / School of Social Transformation (Contributor) / T. Denny Sanford School of Social and Family Dynamics (Contributor) / College of Public Service and Community Solutions (Contributor) / School of Human Evolution and Social Change (Contributor) / School of Historical, Philosophical and Religious Studies (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
A novel approach, the Invariant Based Theory of Composites and the "Trace" method it proposes, has the potential to reduce aerospace composite development times and costs by over 30% thus reinvigorating the development process and encouraging composite technology growth. The "trace" method takes advantage of inherent stiffness properties of laminates, specifically carbon fiber, to make predictions of material properties used to derive design allowables. The advantages of the "trace" theory may not necessarily be specific to the aerospace industry, however many automotive manufacturers are facing environmental, social and political pressure to increase the gas mileage in their vehicles and reduce their carbon footprint. Therefore, the use of lighter materials, such as carbon fiber composites, to replace heavier metals in cars is inevitable yet as of now few auto manufacturers implement composites in their cars. The high material, testing and development costs, much like the aerospace industry, have been prohibitive to widespread use of these materials but progress is being made in overcoming those challenges. The "trace" method, while initially intended for quasi-isotropic, aerospace grade carbon-fiber laminates, still yields reasonable, and correctable, results for types of laminates as well such as with woven fabrics and thermoplastic matrices, much of which are being used in these early stages of automotive composite development. Despite the varying use of materials, the "trace" method could potentially boost automotive composites in a similar way to the aerospace industry by reducing testing time and costs and perhaps even playing a role in establishing emerging simulations of these materials.
ContributorsBrown, William Ross (Author) / Adams, James (Thesis director) / Anwar, Shahriar (Committee member) / Krause, Stephen (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Netflix has positioned itself at the forefront of the future of television with its original programming, which has been rolled out in greater and more frequent amounts just in the last couple of years. The streaming service has already experimented with creativity in ways most other shows and creators haven't, playing with the pacing of overall seasons as well as the length of episodes. So, too, Netflix has been at the forefront of increasing visibility for minority characters on television. Many of its shows incorporate racially diverse casts and depict lots of LGBTQ characters, a refreshingly realistic view of the world that many of its viewers have always lived in but haven't yet witnessed on television. Visibility and representation are critical concepts for analyzing minority characters on television. It is important for diverse characters to be seen, first and foremost, but also to be seen in positive or at least realistic lights. Care must be taken to avoid fulfilling stereotypes or tropes, and attention must be paid to what has happened to other characters who have come before. However, many of Netflix's portrayals of these characters, particularly bisexual characters, leave much to be desired. With the original dramas House of Cards, Hemlock Grove, Orange is the New Black, and Sense8, all of which include characters who identify as or behave bisexually, Netflix has been reluctant to use the specific word bisexual to describe characters, and many don't even identify their sexuality with a synonym for the term. Many of the bisexual characters that I identified died or were killed on the shows, and nearly all of them fulfilled stereotypes or tropes in some way. There were multiple scenes of threesomes or other distinctly kinky sexual encounters, which served to exoticize bisexuality and distance it from the more normatively viewed identities of heterosexuality and homosexuality. Ultimately, while Netflix's original programming has offered increased visibility to bisexual characters, it has yet to reflect the real community it seeks to portray. In particular, Netflix's refusal to label characters as bisexual is frustrating and limiting. It can be argued that this is a progressive move toward more ideas of sexual fluidity and a post-modern lack of sexual labels, but there are not enough depictions of identified bisexual characters on television yet for this to make sense. Until bisexual characters and their identities are not invisibilized or stigmatized, more work has to be done to ensure that bisexual people are represented fairly and accurately on television and in all media.
ContributorsKoerth, Kimberly Marie (Author) / Himberg, Julia (Thesis director) / Sturges, Robert (Committee member) / Department of English (Contributor) / College of Public Service and Community Solutions (Contributor) / Walter Cronkite School of Journalism and Mass Communication (Contributor) / School of Social Transformation (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The vastly growing field of supercomputing is in dire need of a new measurement system to optimize JMRAM (Josephson junction magnetoresistive random access memory) devices. To effectively measure these devices, an ultra-low-noise, low cost cryogenic dipping probe with a dynamic voltage range is required. This dipping probe has been designed by ASU with <100 nVp-p noise, <10 nV offsets, 10 pV to 16 mV voltage range, and negligible thermoelectric drift. There is currently no other research group or company that can currently match both these low noise levels and wide voltage range. Two different dipping probes can be created with these specifications: one for high-use applications and one for low-use applications. The only difference between these probes is the outer shell; the high-use application probe has a shell made of G-10 fiberglass for a higher price, and the low-use application probe has a shell made of AISI 310 steel for a lower price. Both types of probes can be assembled in less than 8 hours for less than $2,500, requiring only soldering expertise. The low cost and short time to create these probes makes wide profit margins possible. The market for these cryogenic dipping probes is currently untapped, as most research groups and companies that use these probes build their own, which allows for rapid business growth. These potential consumers can be easily reached by marketing these probes at superconducting conferences. After several years of selling >50 probes, mass production can easily become possible by hiring several technicians, and still maintaining wide profit margins.
ContributorsHudson, Brooke Ashley (Author) / Adams, James (Thesis director) / Anwar, Shahriar (Committee member) / Materials Science and Engineering Program (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
How can we change what it means to be a human? Products can be used that will allow for near-instantaneous communication with one’s friends and family wherever they are: and the newest devices do not have to be even carried around, as they can be worn instead. Wearable electronics are quickly becoming very popular, with 232.0 million wearable devices sold in 2015. This report provides an overview of current and developing wearable devices, investigates the characteristics of the average buyer for these different types of devices. Finally, marketing strategies are suggested. This work was completed in conjunction with a capstone project with Intel, where three objectives were achieved: First, a universal strain tester that could strain samples cyclically in a manner similar to the body was designed. This equipment was especially designed to be flexible in the testing conditions it could be exposed to, so samples could be tested at elevated temperatures or even underwater. Next, dogbone shaped samples for the testing of Young’s Modulus and elongation to failure were produced, and the cut quality of laser, water-jet, and die-cutting was compared in order to select the most defect-free method for reliable testing. Polydimethylsiloxane (PDMS) is a fantastic candidate material for wearable electronics, however there is some discrepancies in the literature—such as from Eleni et. al—about the impact of ultraviolet radiation on the mechanical properties. By conducting accelerated aging tests simulating up to five years exposure to the sun, it was determined that ultraviolet-induced cross-linking of the polymer chains does occur, leading to severe embrittlement (strain to failure reduced from 3.27 to 0.06 in some cases, reduction to approximately 0.21 on average). As simulated tests of possible usage conditions required strains of at least 0.50-0.70, a variety of solutions were suggested to reduce this embrittlement. This project can lead to standardization of wearables electronics testing methods for more reliable predictions about the device behavior, whether that device is a simple pedometer or something that allows the visually impaired to “see”, such as Toyota’s Blaid.
ContributorsNiebroski, Alexander Wayne (Author) / Adams, James (Thesis director) / Anwar, Shahriar (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05