Matching Items (43)
Filtering by
- Genre: Doctoral Dissertation
Description
This thesis presents a gas sensor readout IC for amperometric and conductometric electrochemical sensors. The Analog Front-End (AFE) readout circuit enables tracking long term exposure to hazardous gas fumes in diesel and gasoline equipments, which may be correlated to diseases. Thus, the detection and discrimination of gases using microelectronic gas sensor system is required. This thesis describes the research, development, implementation and test of a small and portable based prototype platform for chemical gas sensors to enable a low-power and low noise gas detection system. The AFE reads out the outputs of eight conductometric sensor array and eight amperometric sensor arrays. The IC consists of a low noise potentiostat, and associated 9bit current-steering DAC for sensor stimulus, followed by the first order nested chopped £U£G ADC. The conductometric sensor uses a current driven approach for extracting conductance of the sensor depending on gas concentration. The amperometric sensor uses a potentiostat to apply constant voltage to the sensors and an I/V converter to measure current out of the sensor. The core area for the AFE is 2.65x0.95 mm2. The proposed system achieves 91 dB SNR at 1.32 mW quiescent power consumption per channel. With digital offset storage and nested chopping, the readout chain achieves 500 fÝV input referred offset.
ContributorsKim, Hyun-Tae (Author) / Bakkaloglu, Bertan (Thesis advisor) / Vermeire, Bert (Committee member) / Spanias, Andreas (Committee member) / Thornton, Trevor (Committee member) / Arizona State University (Publisher)
Created2011
Description
Distributed inference has applications in fields as varied as source localization, evaluation of network quality, and remote monitoring of wildlife habitats. In this dissertation, distributed inference algorithms over multiple-access channels are considered. The performance of these algorithms and the effects of wireless communication channels on the performance are studied. In a first class of problems, distributed inference over fading Gaussian multiple-access channels with amplify-and-forward is considered. Sensors observe a phenomenon and transmit their observations using the amplify-and-forward scheme to a fusion center (FC). Distributed estimation is considered with a single antenna at the FC, where the performance is evaluated using the asymptotic variance of the estimator. The loss in performance due to varying assumptions on the limited amounts of channel information at the sensors is quantified. With multiple antennas at the FC, a distributed detection problem is also considered, where the error exponent is used to evaluate performance. It is shown that for zero-mean channels between the sensors and the FC when there is no channel information at the sensors, arbitrarily large gains in the error exponent can be obtained with sufficient increase in the number of antennas at the FC. In stark contrast, when there is channel information at the sensors, the gain in error exponent due to having multiple antennas at the FC is shown to be no more than a factor of 8/π for Rayleigh fading channels between the sensors and the FC, independent of the number of antennas at the FC, or correlation among noise samples across sensors. In a second class of problems, sensor observations are transmitted to the FC using constant-modulus phase modulation over Gaussian multiple-access-channels. The phase modulation scheme allows for constant transmit power and estimation of moments other than the mean with a single transmission from the sensors. Estimators are developed for the mean, variance and signal-to-noise ratio (SNR) of the sensor observations. The performance of these estimators is studied for different distributions of the observations. It is proved that the estimator of the mean is asymptotically efficient if and only if the distribution of the sensor observations is Gaussian.
ContributorsBanavar, Mahesh Krishna (Author) / Tepedelenlioğlu, Cihan (Thesis advisor) / Spanias, Andreas (Thesis advisor) / Papandreou-Suppappola, Antonia (Committee member) / Duman, Tolga (Committee member) / Zhang, Junshan (Committee member) / Arizona State University (Publisher)
Created2010
Description
Distributed estimation uses many inexpensive sensors to compose an accurate estimate of a given parameter. It is frequently implemented using wireless sensor networks. There have been several studies on optimizing power allocation in wireless sensor networks used for distributed estimation, the vast majority of which assume linear radio-frequency amplifiers. Linear amplifiers are inherently inefficient, so in this dissertation nonlinear amplifiers are examined to gain efficiency while operating distributed sensor networks. This research presents a method to boost efficiency by operating the amplifiers in the nonlinear region of operation. Operating amplifiers nonlinearly presents new challenges. First, nonlinear amplifier characteristics change across manufacturing process variation, temperature, operating voltage, and aging. Secondly, the equations conventionally used for estimators and performance expectations in linear amplify-and-forward systems fail. To compensate for the first challenge, predistortion is utilized not to linearize amplifiers but rather to force them to fit a common nonlinear limiting amplifier model close to the inherent amplifier performance. This minimizes the power impact and the training requirements for predistortion. Second, new estimators are required that account for transmitter nonlinearity. This research derives analytically and confirms via simulation new estimators and performance expectation equations for use in nonlinear distributed estimation. An additional complication when operating nonlinear amplifiers in a wireless environment is the influence of varied and potentially unknown channel gains. The impact of these varied gains and both measurement and channel noise sources on estimation performance are analyzed in this paper. Techniques for minimizing the estimate variance are developed. It is shown that optimizing transmitter power allocation to minimize estimate variance for the most-compressed parameter measurement is equivalent to the problem for linear sensors. Finally, a method for operating distributed estimation in a multipath environment is presented that is capable of developing robust estimates for a wide range of Rician K-factors. This dissertation demonstrates that implementing distributed estimation using nonlinear sensors can boost system efficiency and is compatible with existing techniques from the literature for boosting efficiency at the system level via sensor power allocation. Nonlinear transmitters work best when channel gains are known and channel noise and receiver noise levels are low.
ContributorsSantucci, Robert (Author) / Spanias, Andreas (Thesis advisor) / Tepedelenlioðlu, Cihan (Committee member) / Bakkaloglu, Bertan (Committee member) / Tsakalis, Kostas (Committee member) / Arizona State University (Publisher)
Created2013
Description
In the recent years, deep learning has gained popularity for its ability to be utilized for several computer vision applications without any apriori knowledge. However, to introduce better inductive bias incorporating prior knowledge along with learnedinformation is critical. To that end, human intervention including choice of algorithm, data and model in deep learning pipelines can be considered a prior. Thus, it is extremely important to select effective priors for a given application. This dissertation explores different aspects of a deep learning pipeline and provides insights as to why a particular prior is effective for the corresponding application. For analyzing the effect of model priors, three applications which involvesequential modelling problems i.e. Audio Source Separation, Clinical Time-series (Electroencephalogram (EEG)/Electrocardiogram(ECG)) based Differential Diagnosis and Global Horizontal Irradiance Forecasting for Photovoltaic (PV) Applications are chosen. For data priors, the application of image classification is chosen and a new algorithm titled,“Invenio” that can effectively use data semantics for both task and distribution shift scenarios is proposed. Finally, the effectiveness of a data selection prior is shown using the application of object tracking wherein the aim is to maintain the tracking performance while prolonging the battery usage of image sensors by optimizing the data selected for reading from the environment. For every research contribution of this dissertation, several empirical studies are conducted on benchmark datasets. The proposed design choices demonstrate significant performance improvements in comparison to the existing application specific state-of-the-art deep learning strategies.
ContributorsKatoch, Sameeksha (Author) / Spanias, Andreas (Thesis advisor) / Turaga, Pavan (Thesis advisor) / Thiagarajan, Jayaraman J. (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Arizona State University (Publisher)
Created2022
Description
Huge advancements have been made over the years in terms of modern image-sensing hardware and visual computing algorithms (e.g. computer vision, image processing, computational photography). However, to this day, there still exists a current gap between the hardware and software design in an imaging system, which silos one research domain from another. Bridging this gap is the key to unlocking new visual computing capabilities for end applications in commercial photography, industrial inspection, and robotics. This thesis explores avenues where hardware-software co-design of image sensors can be leveraged to replace conventional hardware components in an imaging system with software for enhanced reconfigurability. As a result, the user can program the image sensor in a way best suited to the end application. This is referred to as software-defined imaging (SDI), where image sensor behavior can be altered by the system software depending on the user's needs. The scope of this thesis covers the development and deployment of SDI algorithms for low-power computer vision. Strategies for sparse spatial sampling have been developed in this thesis for power optimization of the vision sensor. This dissertation shows how a hardware-compatible state-of-the-art object tracker can be coupled with a Kalman filter for energy gains at the sensor level. Extensive experiments reveal how adaptive spatial sampling of image frames with this hardware-friendly framework offers attractive energy-accuracy tradeoffs. Another thrust of this thesis is to demonstrate the benefits of reinforcement learning in this research avenue. A major finding reported in this dissertation shows how neural-network-based reinforcement learning can be exploited for the adaptive subsampling framework to achieve improved sampling performance, thereby optimizing the energy efficiency of the image sensor. The last thrust of this thesis is to leverage emerging event-based SDI technology for building a low-power navigation system. A homography estimation pipeline has been proposed in this thesis which couples the right data representation with a differential scale-invariant feature transform (SIFT) module to extract rich visual cues from event streams. Positional encoding is leveraged with a multilayer perceptron (MLP) network to get robust homography estimation from event data.
ContributorsIqbal, Odrika (Author) / Jayasuriya, Suren (Thesis advisor) / Spanias, Andreas (Thesis advisor) / LiKamWa, Robert (Committee member) / Owens, Chris (Committee member) / Arizona State University (Publisher)
Created2023
Description
Severe forms of mental illness, such as schizophrenia and bipolar disorder, are debilitating conditions that negatively impact an individual's quality of life. Additionally, they are often difficult and expensive to diagnose and manage, placing a large burden on society. Mental illness is typically diagnosed by the use of clinical interviews and a set of neuropsychiatric batteries; a key component of nearly all of these evaluations is some spoken language task. Clinicians have long used speech and language production as a proxy for neurological health, but most of these assessments are subjective in nature. Meanwhile, technological advancements in speech and natural language processing have grown exponentially over the past decade, increasing the capacity of computer models to assess particular aspects of speech and language. For this reason, many have seen an opportunity to leverage signal processing and machine learning applications to objectively assess clinical speech samples in order to automatically compute objective measures of neurological health. This document summarizes several contributions to expand upon this body of research. Mainly, there is still a large gap between the theoretical power of computational language models and their actual use in clinical applications. One of the largest concerns is the limited and inconsistent reliability of speech and language features used in models for assessing specific aspects of mental health; numerous methods may exist to measure the same or similar constructs and lead researchers to different conclusions in different studies. To address this, a novel measurement model based on a theoretical framework of speech production is used to motivate feature selection, while also performing a smoothing operation on features across several domains of interest. Then, these composite features are used to perform a much wider range of analyses than is typical of previous studies, looking at everything from diagnosis to functional competency assessments. Lastly, potential improvements to address practical implementation challenges associated with the use of speech and language technology in a real-world environment are investigated. The goal of this work is to demonstrate the ability of speech and language technology to aid clinical practitioners toward improvements in quality of life outcomes for their patients.
ContributorsVoleti, Rohit Nihar Uttam (Author) / Berisha, Visar (Thesis advisor) / Liss, Julie M (Thesis advisor) / Turaga, Pavan (Committee member) / Spanias, Andreas (Committee member) / Arizona State University (Publisher)
Created2022
Description
Due to their effectiveness in capturing similarities between different entities, graphical models are widely used to represent datasets that reside on irregular and complex manifolds. Graph signal processing offers support to handle such complex datasets. By extending the digital signal processing conceptual frame from time and frequency domain to graph domain, operators such as graph shift, graph filter and graph Fourier transform are defined. In this dissertation, two novel graph filter design methods are proposed. First, a graph filter with multiple shift matrices is applied to semi-supervised classification, which can handle features with uneven qualities through an embedded feature importance evaluation process. Three optimization solutions are provided: an alternating minimization method that is simple to implement, a convex relaxation method that provides a theoretical performance benchmark and a genetic algorithm, which is computationally efficient and better at configuring overfitting. Second, a graph filter with splitting-and-merging scheme is proposed, which splits the graph into multiple subgraphs. The corresponding subgraph filters are trained parallelly and in the last, by merging all the subgraph filters, the final graph filter is obtained. Due to the splitting process, the redundant edges in the original graph are dropped, which can save computational cost in semi-supervised classification. At the same time, this scheme also enables the filter to represent unevenly sampled data in manifold learning. To evaluate the performance of the proposed graph filter design approaches, simulation experiments with synthetic and real datasets are conduct. The Monte Carlo cross validation method is employed to demonstrate the need for the proposed graph filter design approaches in various application scenarios. Criterions, such as accuracy, Gini score, F1-score and learning curves, are provided to analyze the performance of the proposed methods and their competitors.
ContributorsFan, Jie (Author) / Tepedelenlioğlu, Cihan (Thesis advisor) / Spanias, Andreas (Thesis advisor) / Tsakalis, Konstantinos (Committee member) / Dasarathy, Gautam (Committee member) / Arizona State University (Publisher)
Created2022
Description
Operational efficiency of solar energy farms requires detailed analytics and information on each panel regarding voltage, current, temperature, and irradiance. Monitoring utility-scale solar arrays was shown to minimize the cost of maintenance and help optimize the performance of photovoltaic (PV) arrays under various conditions. This dissertation describes a project that focuses on the development of machine learning and neural network algorithms. It also describes an 18kW solar array testbed for the purpose of PV monitoring and control. The use of the 18kW Sensor Signal and Information Processing (SenSIP) PV testbed which consists of 104 modules fitted with smart monitoring devices (SMDs) is described in detail. Each of the SMDs has embedded, a wireless transceiver, and relays that enable continuous monitoring, fault detection, and real-time connection topology changes. Data is obtained in real time using the SenSIP PV testbed. Machine learning and neural network algorithms for PV fault classification is are studied in depth. More specifically, the development of a series of customized neural networks for detection and classification of solar array faults that include soiling, shading, degradation, short circuits and standard test conditions is considered. The evaluation of fault detection and classification methods using metrics such as accuracy, confusion matrices, and the Risk Priority Number (RPN) is performed. The examination and assessment the classification performance of customized neural networks with dropout regularizers is presented in detail. The development and evaluation of neural network pruning strategies and illustration of the trade-off between fault classification model accuracy and algorithm complexity is studied. This study includes data from the National Renewable Energy Laboratory (NREL) database and also real-time data collected from the SenSIP testbed at MTW under various loading and shading conditions. The overall approach for detection and classification promises to elevate the performance and robustness of PV arrays.
ContributorsRao, Sunil (Author) / Spanias, Andreas (Thesis advisor) / Tepedelenlioğlu, Cihan (Thesis advisor) / Tsakalis, Konstantinos (Committee member) / Srinivasan, Devarajan (Committee member) / Arizona State University (Publisher)
Created2021
Description
Dealing with relational data structures is central to a wide-range of applications including social networks, epidemic modeling, molecular chemistry, medicine, energy distribution, and transportation. Machine learning models that can exploit the inherent structural/relational bias in the graph structured data have gained prominence in recent times. A recurring idea that appears in all approaches is to encode the nodes in the graph (or the entire graph) as low-dimensional vectors also known as embeddings, prior to carrying out downstream task-specific learning. It is crucial to eliminate hand-crafted features and instead directly incorporate the structural inductive bias into the deep learning architectures.
In this dissertation, deep learning models that directly operate on graph structured data are proposed for effective representation learning. A literature review on existing graph representation learning is provided in the beginning of the dissertation. The primary focus of dissertation is on building novel graph neural network architectures that are robust against adversarial attacks. The proposed graph neural network models are extended to multiplex graphs (heterogeneous graphs). Finally, a relational neural network model is proposed to operate on a human structural connectome. For every research contribution of this dissertation, several empirical studies are conducted on benchmark datasets. The proposed graph neural network models, approaches, and architectures demonstrate significant performance improvements in comparison to the existing state-of-the-art graph embedding strategies.
ContributorsShanthamallu, Uday Shankar (Author) / Spanias, Andreas (Thesis advisor) / Thiagarajan, Jayaraman J (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Berisha, Visar (Committee member) / Arizona State University (Publisher)
Created2021
Description
Speech analysis for clinical applications has emerged as a burgeoning field, providing valuable insights into an individual's physical and physiological state. Researchers have explored speech features for clinical applications, such as diagnosing, predicting, and monitoring various pathologies. Before presenting the new deep learning frameworks, this thesis introduces a study on conventional acoustic feature changes in subjects with post-traumatic headache (PTH) attributed to mild traumatic brain injury (mTBI). This work demonstrates the effectiveness of using speech signals to assess the pathological status of individuals. At the same time, it highlights some of the limitations of conventional acoustic and linguistic features, such as low repeatability and generalizability. Two critical characteristics of speech features are (1) good robustness, as speech features need to generalize across different corpora, and (2) high repeatability, as speech features need to be invariant to all confounding factors except the pathological state of targets. This thesis presents two research thrusts in the context of speech signals in clinical applications that focus on improving the robustness and repeatability of speech features, respectively. The first thrust introduces a deep learning framework to generate acoustic feature embeddings sensitive to vocal quality and robust across different corpora. A contrastive loss combined with a classification loss is used to train the model jointly, and data-warping techniques are employed to improve the robustness of embeddings. Empirical results demonstrate that the proposed method achieves high in-corpus and cross-corpus classification accuracy and generates good embeddings sensitive to voice quality and robust across different corpora. The second thrust introduces using the intra-class correlation coefficient (ICC) to evaluate the repeatability of embeddings. A novel regularizer, the ICC regularizer, is proposed to regularize deep neural networks to produce embeddings with higher repeatability. This ICC regularizer is implemented and applied to three speech applications: a clinical application, speaker verification, and voice style conversion. The experimental results reveal that the ICC regularizer improves the repeatability of learned embeddings compared to the contrastive loss, leading to enhanced performance in downstream tasks.
ContributorsZhang, Jianwei (Author) / Jayasuriya, Suren (Thesis advisor) / Berisha, Visar (Thesis advisor) / Liss, Julie (Committee member) / Spanias, Andreas (Committee member) / Arizona State University (Publisher)
Created2023