Matching Items (55)
Filtering by
- Genre: Doctoral Dissertation
Description
Dimensionality reduction methods are examined for large-scale discrete problems, specifically for the solution of three-dimensional geophysics problems: the inversion of gravity and magnetic data. The matrices for the associated forward problems have beneficial structure for each depth layer of the volume domain, under mild assumptions, which facilitates the use of the two dimensional fast Fourier transform for evaluating forward and transpose matrix operations, providing considerable savings in both computational costs and storage requirements. Application of this approach for the magnetic problem is new in the geophysics literature. Further, the approach is extended for padded volume domains.
Stabilized inversion is obtained efficiently by applying novel randomization techniques within each update of the iteratively reweighted scheme. For a general rectangular linear system, a randomization technique combined with preconditioning is introduced and investigated. This is shown to provide well-conditioned inversion, stabilized through truncation. Applying this approach, while implementing matrix operations using the two dimensional fast Fourier transform, yields computationally effective inversion, in memory and cost. Validation is provided via synthetic data sets, and the approach is contrasted with the well-known LSRN algorithm when applied to these data sets. The results demonstrate a significant reduction in computational cost with the new algorithm. Further, this new algorithm produces results for inversion of real magnetic data consistent with those provided in literature.
Typically, the iteratively reweighted least squares algorithm depends on a standard Tikhonov formulation. Here, this is solved using both a randomized singular value de- composition and the iterative LSQR Krylov algorithm. The results demonstrate that the new algorithm is competitive with these approaches and offers the advantage that no regularization parameter needs to be found at each outer iteration.
Given its efficiency, investigating the new algorithm for the joint inversion of these data sets may be fruitful. Initial research on joint inversion using the two dimensional fast Fourier transform has recently been submitted and provides the basis for future work. Several alternative directions for dimensionality reduction are also discussed, including iteratively applying an approximate pseudo-inverse and obtaining an approximate Kronecker product decomposition via randomization for a general matrix. These are also topics for future consideration.
Stabilized inversion is obtained efficiently by applying novel randomization techniques within each update of the iteratively reweighted scheme. For a general rectangular linear system, a randomization technique combined with preconditioning is introduced and investigated. This is shown to provide well-conditioned inversion, stabilized through truncation. Applying this approach, while implementing matrix operations using the two dimensional fast Fourier transform, yields computationally effective inversion, in memory and cost. Validation is provided via synthetic data sets, and the approach is contrasted with the well-known LSRN algorithm when applied to these data sets. The results demonstrate a significant reduction in computational cost with the new algorithm. Further, this new algorithm produces results for inversion of real magnetic data consistent with those provided in literature.
Typically, the iteratively reweighted least squares algorithm depends on a standard Tikhonov formulation. Here, this is solved using both a randomized singular value de- composition and the iterative LSQR Krylov algorithm. The results demonstrate that the new algorithm is competitive with these approaches and offers the advantage that no regularization parameter needs to be found at each outer iteration.
Given its efficiency, investigating the new algorithm for the joint inversion of these data sets may be fruitful. Initial research on joint inversion using the two dimensional fast Fourier transform has recently been submitted and provides the basis for future work. Several alternative directions for dimensionality reduction are also discussed, including iteratively applying an approximate pseudo-inverse and obtaining an approximate Kronecker product decomposition via randomization for a general matrix. These are also topics for future consideration.
ContributorsHogue, Jarom David (Author) / Renaut, Rosemary A. (Thesis advisor) / Jackiewicz, Zdzislaw (Committee member) / Platte, Rodrigo B (Committee member) / Ringhofer, Christian (Committee member) / Wlefert, Bruno (Committee member) / Arizona State University (Publisher)
Created2020
Description
The focus of this dissertation is first on understanding the difficulties involved in constructing reduced order models of structures that exhibit a strong nonlinearity/strongly nonlinear events such as snap-through, buckling (local or global), mode switching, symmetry breaking. Next, based on this understanding, it is desired to modify/extend the current Nonlinear Reduced Order Modeling (NLROM) methodology, basis selection and/or identification methodology, to obtain reliable reduced order models of these structures. Focusing on these goals, the work carried out addressed more specifically the following issues:
i) optimization of the basis to capture at best the response in the smallest number of modes,
ii) improved identification of the reduced order model stiffness coefficients,
iii) detection of strongly nonlinear events using NLROM.
For the first issue, an approach was proposed to rotate a limited number of linear modes to become more dominant in the response of the structure. This step was achieved through a proper orthogonal decomposition of the projection on these linear modes of a series of representative nonlinear displacements. This rotation does not expand the modal space but renders that part of the basis more efficient, the identification of stiffness coefficients more reliable, and the selection of dual modes more compact. In fact, a separate approach was also proposed for an independent optimization of the duals. Regarding the second issue, two tuning approaches of the stiffness coefficients were proposed to improve the identification of a limited set of critical coefficients based on independent response data of the structure. Both approaches led to a significant improvement of the static prediction for the clamped-clamped curved beam model. Extensive validations of the NLROMs based on the above novel approaches was carried out by comparisons with full finite element response data. The third issue, the detection of nonlinear events, was finally addressed by building connections between the eigenvalues of the finite element software (Nastran here) and NLROM tangent stiffness matrices and the occurrence of the ‘events’ which is further extended to the assessment of the accuracy with which the NLROM captures the full finite element behavior after the event has occurred.
i) optimization of the basis to capture at best the response in the smallest number of modes,
ii) improved identification of the reduced order model stiffness coefficients,
iii) detection of strongly nonlinear events using NLROM.
For the first issue, an approach was proposed to rotate a limited number of linear modes to become more dominant in the response of the structure. This step was achieved through a proper orthogonal decomposition of the projection on these linear modes of a series of representative nonlinear displacements. This rotation does not expand the modal space but renders that part of the basis more efficient, the identification of stiffness coefficients more reliable, and the selection of dual modes more compact. In fact, a separate approach was also proposed for an independent optimization of the duals. Regarding the second issue, two tuning approaches of the stiffness coefficients were proposed to improve the identification of a limited set of critical coefficients based on independent response data of the structure. Both approaches led to a significant improvement of the static prediction for the clamped-clamped curved beam model. Extensive validations of the NLROMs based on the above novel approaches was carried out by comparisons with full finite element response data. The third issue, the detection of nonlinear events, was finally addressed by building connections between the eigenvalues of the finite element software (Nastran here) and NLROM tangent stiffness matrices and the occurrence of the ‘events’ which is further extended to the assessment of the accuracy with which the NLROM captures the full finite element behavior after the event has occurred.
ContributorsLin, Jinshan (Author) / Mignolet, Marc (Thesis advisor) / Jiang, Hanqing (Committee member) / Oswald, Jay (Committee member) / Spottswood, Stephen (Committee member) / Rajan, Subramaniam D. (Committee member) / Arizona State University (Publisher)
Created2020
Description
A new class of electronic materials from food and foodstuff was developed to form a “toolkit” for edible electronics along with inorganic materials. Electrical components like resistors, capacitors and inductors were fabricated with such materials and tested. Applicable devices such as filters, microphones and pH sensors were built with edible materials. Among the applications, a wireless edible pH sensor was optimized in terms of form factor, fabrication process and cost. This dissertation discusses the material sciences of food industry, design and fabrication of electronics and biomedical engineering by demonstrating edible electronic materials, components and devices such as filters, microphones and pH sensors. pH sensors are optimized for two different generations of design and fabrication.
ContributorsYang, Haokai (Author) / Jiang, Hanqing (Thesis advisor) / Yu, Hongbin (Thesis advisor) / Yao, Yu (Committee member) / Nian, Qiong (Committee member) / Zhuang, Houlong (Committee member) / Arizona State University (Publisher)
Created2021
Description
Extensive efforts have been devoted to understanding material failure in the last several decades. A suitable numerical method and specific failure criteria are required for failure simulation. The finite element method (FEM) is the most widely used approach for material mechanical modelling. Since FEM is based on partial differential equations, it is hard to solve problems involving spatial discontinuities, such as fracture and material interface. Due to their intrinsic characteristics of integro-differential governing equations, discontinuous approaches are more suitable for problems involving spatial discontinuities, such as lattice spring method, discrete element method, and peridynamics. A recently proposed lattice particle method is shown to have no restriction of Poisson’s ratio, which is very common in discontinuous methods. In this study, the lattice particle method is adopted to study failure problems. In addition of numerical method, failure criterion is essential for failure simulations. In this study, multiaxial fatigue failure is investigated and then applied to the adopted method. Another critical issue of failure simulation is that the simulation process is time-consuming. To reduce computational cost, the lattice particle method can be partly replaced by neural network model.First, the development of a nonlocal maximum distortion energy criterion in the framework of a Lattice Particle Model (LPM) is presented for modeling of elastoplastic materials. The basic idea is to decompose the energy of a discrete material point into dilatational and distortional components, and plastic yielding of bonds associated with this material point is assumed to occur only when the distortional component reaches a critical value. Then, two multiaxial fatigue models are proposed for random loading and biaxial tension-tension loading, respectively. Following this, fatigue cracking in homogeneous and composite materials is studied using the lattice particle method and the proposed multiaxial fatigue model. Bi-phase material fatigue crack simulation is performed. Next, an integration of an efficient deep learning model and the lattice particle method is presented to predict fracture pattern for arbitrary microstructure and loading conditions. With this integration, computational accuracy and efficiency are both considered. Finally, some conclusion and discussion based on this study are drawn.
ContributorsWei, Haoyang (Author) / Liu, Yongming (Thesis advisor) / Chattopadhyay, Aditi (Committee member) / Jiang, Hanqing (Committee member) / Jiao, Yang (Committee member) / Oswald, Jay (Committee member) / Arizona State University (Publisher)
Created2021
Description
Special thermal interface materials are required for connecting devices that operate at high temperatures up to 300°C. Because devices used in power electronics, such as GaN, SiC, and other wide bandgap semiconductors, can reach very high temperatures (beyond 250°C), a high melting point, and high thermal & electrical conductivity are required for the thermal interface material. Traditional solder materials for packaging cannot be used for these applications as they do not meet these requirements. Sintered nano-silver is a good candidate on account of its high thermal and electrical conductivity and very high melting point. The high temperature operating conditions of these devices lead to very high thermomechanical stresses that can adversely affect performance and also lead to failure. A number of these devices are mission critical and, therefore, there is a need for very high reliability. Thus, computational and nondestructive techniques and design methodology are needed to determine, characterize, and design the packages. Actual thermal cycling tests can be very expensive and time consuming. It is difficult to build test vehicles in the lab that are very close to the production level quality and therefore making comparisons or making predictions becomes a very difficult exercise. Virtual testing using a Finite Element Analysis (FEA) technique can serve as a good alternative. In this project, finite element analysis is carried out to help achieve this objective. A baseline linear FEA is performed to determine the nature and magnitude of stresses and strains that occur during the sintering step. A nonlinear coupled thermal and mechanical analysis is conducted for the sintering step to study the behavior more accurately and in greater detail. Damage and fatigue analysis are carried out for multiple thermal cycling conditions. The results are compared with the actual results from a prior study. A process flow chart outlining the FEA modeling process is developed as a template for the future work. A Coffin-Manson type relationship is developed to help determine the accelerated aging conditions and predict life for different service conditions.
ContributorsAmla, Tarun (Author) / Chawla, Nikhilesh (Thesis advisor) / Jiao, Yang (Committee member) / Liu, Yongming (Committee member) / Zhuang, Houlong (Committee member) / Jiang, Hanqing (Committee member) / Arizona State University (Publisher)
Created2020