Matching Items (124)
Filtering by
- Genre: Academic theses
Description
There is a high demand for customized designs of various types of cement-based materials in order to address specific purposes in the construction field. These demands stem from the need to optimize the cementitious matrix properties and reinforcement choices, especially in high reliability, durability, and performance applications that include infrastructure, energy production, commercial buildings, and may ultimately be extended to low risk/high volume applications such as residential applications. The typical tools required to guide practicing engineers should be based on optimization algorithms that require highly efficient capacity and design alternatives and optimal computational tools. The general case of flexural design of members is an important aspect of design of structural members which can be extended to a variety of applications that include various cross-sections such as rectangular, W-sections, channels, angles, and T sections. The model utilized the simplified linear constitutive response of cement-based composite in compression and tension and extends into a two-segment elastic-plastic, strain softening, hardening, tension-stiffening, and a multi-segment system. The generalized parametric model proposed uses a dimensionless system in the stress-strain materials diagram to formulate piecewise equations for an equilibrium of internal stresses and obtains strain distributions for the closed-form solution of neutral axis location. This would allow for the computation of piecewise moment-curvature response. The number of linear residual stress implemented is flexible to a user to maintain a robust response. In the present approach bilinear, trilinear, and quad-linear models are addressed and a procedure for incorporating additional segments is presented. Moreover, a closed-form solution of moment-curvature can be solved and employed in calculating load-deflection response. The model is adaptable for various types of fiber-reinforced and textile reinforced concrete (FRC, TRC, UHPC, AAC, and Reinforced Concrete). The extensions to cover continuous fiber reinforcement such as textile reinforced concrete (TRC, FRCM) strengthening and repair are addressed. The theoretical model is extended to incorporate the hybrid design (HRC) with continuous rebar with FRC to increase the ductility and ultimate moment capacity. HRC extends the performance of the fiber system to incorporate residual capacity into a serviceability-based design that reduced the reliance on the design based on the limit state. The design chart for HRC and as well as conventional RC has been generated for practicing engineering applications. Results are compared to a large array of data from experimental results conducted at the ASU structural lab facilities and other published literature.
Contributorspleesudjai, chidchanok (Author) / Mobasher, Barzin (Thesis advisor) / Neithalath, Narayanan (Committee member) / Rajan, Subramaniam (Committee member) / Arizona State University (Publisher)
Created2021
Description
Composite materials are finally providing uses hitherto reserved for metals in structural systems applications – airframes and engine containment systems, wraps for repair and rehabilitation, and ballistic/blast mitigation systems. They have high strength-to-weight ratios, are durable and resistant to environmental effects, have high impact strength, and can be manufactured in a variety of shapes. Generalized constitutive models are being developed to accurately model composite systems so they can be used in implicit and explicit finite element analysis. These models require extensive characterization of the composite material as input. The particular constitutive model of interest for this research is a three-dimensional orthotropic elasto-plastic composite material model that requires a total of 12 experimental stress-strain curves, yield stresses, and Young’s Modulus and Poisson’s ratio in the material directions as input. Sometimes it is not possible to carry out reliable experimental tests needed to characterize the composite material. One solution is using virtual testing to fill the gaps in available experimental data. A Virtual Testing Software System (VTSS) has been developed to address the need for a less restrictive method to characterize a three-dimensional orthotropic composite material. The system takes in the material properties of the constituents and completes all 12 of the necessary characterization tests using finite element (FE) models. Verification and validation test cases demonstrate the capabilities of the VTSS.
ContributorsHarrington, Joseph (Author) / Rajan, Subramaniam D. (Thesis advisor) / Neithalath, Narayanan (Committee member) / Mobasher, Barzin (Committee member) / Arizona State University (Publisher)
Created2015
Description
A simplified bilinear moment-curvature model are derived based on the moment-curvature response generated from a parameterized stress-strain response of strain softening and or strain-hardening material by Dr. Barzin Mobasher and Dr. Chote Soranakom. Closed form solutions are developed for deflection calculations of determinate beams subjected to usual loading patterns at any load stage. The solutions are based on a bilinear moment curvature response characterized by the flexural crack initiation and ultimate capacity based on a deflection hardening behavior. Closed form equations for deflection calculation are presented for simply supported beams under three point bending, four point bending, uniform load, concentrated moment at the middle, pure bending, and for cantilever beam under a point load at the end, a point load with an arbitrary distance from the fixed end, and uniform load. These expressions are derived for pre-cracked and post cracked regions. A parametric study is conducted to examine the effects of moment and curvature at the ultimate stage to moment and curvature at the first crack ratios on the deflection. The effectiveness of the simplified closed form solution is demonstrated by comparing the analytical load deflection response and the experimental results for three point and four point bending. The simplified bilinear moment-curvature model is modified by imposing the deflection softening behavior so that it can be widely implemented in the analysis of 2-D panels. The derivations of elastic solutions and yield line approach of 2-D panels are presented. Effectiveness of the proposed moment-curvature model with various types of panels is verified by comparing the simulated data with the experimental data of panel test.
ContributorsWang, Xinmeng (Author) / Mobasher, Barzin (Thesis advisor) / Rajan, Subramaniam D. (Committee member) / Neithalath, Narayanan (Committee member) / Arizona State University (Publisher)
Created2015
Description
Cyber-Physical Systems (CPS) are being used in many safety-critical applications. Due to the important role in virtually every aspect of human life, it is crucial to make sure that a CPS works properly before its deployment. However, formal verification of CPS is a computationally hard problem. Therefore, lightweight verification methods such as testing and monitoring of the CPS are considered in the industry. The formal representation of the CPS requirements is a challenging task. In addition, checking the system outputs with respect to requirements is a computationally complex problem. In this dissertation, these problems for the verification of CPS are addressed. The first method provides a formal requirement analysis framework which can find logical issues in the requirements and help engineers to correct the requirements. Also, a method is provided to detect tests which vacuously satisfy the requirement because of the requirement structure. This method is used to improve the test generation framework for CPS. Finally, two runtime verification algorithms are developed for off-line/on-line monitoring with respect to real-time requirements. These monitoring algorithms are computationally efficient, and they can be used in practical applications for monitoring CPS with low runtime overhead.
ContributorsDokhanchi, Adel (Author) / Fainekos, Georgios (Thesis advisor) / Lee, Yann-Hang (Committee member) / Sarjoughian, Hessam S. (Committee member) / Shrivastava, Aviral (Committee member) / Arizona State University (Publisher)
Created2017