Matching Items (2)
Filtering by
- Genre: Academic theses
- Member of: Theses and Dissertations
Description
The partially-depleted (PD) silicon Metal Semiconductor Field Effect Transistor (MESFET) is becoming more and more attractive for analog and RF applications due to its high breakdown voltage. Compared to conventional CMOS high voltage transistors, the silicon MESFET can be fabricated in commercial standard Silicon-on-Insulator (SOI) CMOS foundries without any change to the process. The transition frequency of the device is demonstrated to be 45GHz, which makes the MESFET suitable for applications in high power RF power amplifier designs. Also, high breakdown voltage and low turn-on resistance make it the ideal choice for switches in the switching regulator designs. One of the anticipated applications of the MESFET is for the pass device for a low dropout linear regulator. Conventional NMOS and PMOS linear regulators suffer from high dropout voltage, low bandwidth and poor stability issues. In contrast, the N-MESFET pass transistor can provide an ultra-low dropout voltage and high bandwidth without the need for an external compensation capacitor to ensure stability. In this thesis, the design theory and problems of the conventional linear regulators are discussed. N-MESFET low dropout regulators are evaluated and characterized. The error amplifier used a folded cascode architecture with gain boosting. The source follower topology is utilized as the buffer to sink the gate leakage current from the MESFET. A shunt-feedback transistor is added to reduce the output impedance and provide the current adaptively. Measurement results show that the dropout voltage is less than 150 mV for a 1A load current at 1.8V output. Radiation measurements were done for discrete MESFET and fully integrated LDO regulators, which demonstrate their radiation tolerance ability for aerospace applications.
ContributorsChen, Bo (Author) / Thornton, Trevor (Thesis advisor) / Bakkaloglu, Bertan (Committee member) / Goryll, Michael (Committee member) / Arizona State University (Publisher)
Created2013
Description
Light-driven reactions can replace chemical and material consumption of advanced water treatment technologies. A barrier to light-driven water treatment is optical obstructions in aquafers (i.e. granular media) or built infrastructures (i.e. tubing) that limits light propagation from a single source such as the sun, or lamps. Side emitting optical fibers (SEOFs) can increase light distribution by > 1000 X from one-point source, but absorbance of UV light by conventional optical fibers limits their application to visible light only.
This dissertation assessed how SEOFs can enable visible through ultraviolet light-driven processes to purify water. I first used an existing visible light polymer SEOF and phototrophic organisms to increase the dissolved oxygen level of a granular sand reactor to > 15 mg DO/L. The results indicated that SEOFs successfully guide light past optical obstructions for environmental remediation which encouraged the fabrication of UV-C SEOFs for microbial inactivation.
I was the first to obtain consecutive UV-C side emission from optical fibers by placing nanoparticles on the surface of a UV transmitting glass core. The nanoparticles induced side-emission via Mie scattering and interactions with the evanescent wave. The side emission intensity was modulated by tuning the separation distance between the nanoparticle and fiber surface. Coating the fiber with a UV-C transparent polymer offered the optical fiber flexibility and prevented nanoparticle release into solution. One SEOF coupled to a 265 nm LED achieved 3-log inactivation of E. coli. Finally, a method was developed to quantify the zone of inhibition obtained by a low flux output source. By placing a SEOF connected to a UV-C LED over a nutrient-rich LB agar plate, I illustrated that one SEOF inhibited the growth of P. aeruginosa and E. coli within 2.8 cm along the fiber’s length. Ultimately this research informed that side-emitting optical fibers can enable light-driven water purification by guiding and distributing specific wavelengths of light directly to the microbial communities of interest.
This dissertation assessed how SEOFs can enable visible through ultraviolet light-driven processes to purify water. I first used an existing visible light polymer SEOF and phototrophic organisms to increase the dissolved oxygen level of a granular sand reactor to > 15 mg DO/L. The results indicated that SEOFs successfully guide light past optical obstructions for environmental remediation which encouraged the fabrication of UV-C SEOFs for microbial inactivation.
I was the first to obtain consecutive UV-C side emission from optical fibers by placing nanoparticles on the surface of a UV transmitting glass core. The nanoparticles induced side-emission via Mie scattering and interactions with the evanescent wave. The side emission intensity was modulated by tuning the separation distance between the nanoparticle and fiber surface. Coating the fiber with a UV-C transparent polymer offered the optical fiber flexibility and prevented nanoparticle release into solution. One SEOF coupled to a 265 nm LED achieved 3-log inactivation of E. coli. Finally, a method was developed to quantify the zone of inhibition obtained by a low flux output source. By placing a SEOF connected to a UV-C LED over a nutrient-rich LB agar plate, I illustrated that one SEOF inhibited the growth of P. aeruginosa and E. coli within 2.8 cm along the fiber’s length. Ultimately this research informed that side-emitting optical fibers can enable light-driven water purification by guiding and distributing specific wavelengths of light directly to the microbial communities of interest.
ContributorsLanzarini-Lopes, Mariana (Author) / Westerhoff, Paul (Thesis advisor) / Alvarez, Pedro J (Committee member) / Garcia-Segura, Sergi (Committee member) / Arizona State University (Publisher)
Created2020