Matching Items (3)
Filtering by
- All Subjects: MIMO
- All Subjects: hardware accelerator
- Genre: Masters Thesis
- Creators: Bliss, Daniel
- Resource Type: Text
- Status: Published
Description
As the number of devices with wireless capabilities and the proximity of these devices to each other increases, better ways to handle the interference they cause need to be explored. Also important is for these devices to keep up with the demand for data rates while not compromising on industry established expectations of power consumption and mobility. Current methods of distributing the spectrum among all participants are expected to not cope with the demand in a very near future. In this thesis, the effect of employing sophisticated multiple-input, multiple-output (MIMO) systems in this regard is explored. The efficacy of systems which can make intelligent decisions on the transmission mode usage and power allocation to these modes becomes relevant in the current scenario, where the need for performance far exceeds the cost expendable on hardware. The effect of adding multiple antennas at either ends will be examined, the capacity of such systems and of networks comprised of many such participants will be evaluated. Methods of simulating said networks, and ways to achieve better performance by making intelligent transmission decisions will be proposed. Finally, a way of access control closer to the physical layer (a 'statistical MAC') and a possible metric to be used for such a MAC is suggested.
ContributorsThontadarya, Niranjan (Author) / Bliss, Daniel W (Thesis advisor) / Berisha, Visar (Committee member) / Ying, Lei (Committee member) / Arizona State University (Publisher)
Created2014
Description
Multiple-input multiple-output systems have gained focus in the last decade due to the benefits they provide in enhancing the quality of communications. On the other hand, full-duplex communication has attracted remarkable attention due to its ability to improve the spectral efficiency compared to the existing half-duplex systems. Using full-duplex communications on MIMO co-operative networks can provide us solutions that can completely outperform existing systems with simultaneous transmission and reception at high data rates.
This thesis considers a full-duplex MIMO relay which amplifies and forwards the received signals, between a source and a destination that do not a have line of sight. Full-duplex mode raises the problem of self-interference. Though all the links in the system undergo frequency flat fading, the end-to-end effective channel is frequency selective. This is due to the imperfect cancellation of the self-interference at the relay and this residual self-interference acts as intersymbol interference at the destination which is treated by equalization. This also leads to complications in form of recursive equations to determine the input-output relationship of the system. This also leads to complications in the form of recursive equations to determine the input-output relationship of the system.
To overcome this, a signal flow graph approach using Mason's gain formula is proposed, where the effective channel is analyzed with keen notice to every loop and path the signal traverses. This gives a clear understanding and awareness about the orders of the polynomials involved in the transfer function, from which desired conclusions can be drawn. But the complexity of Mason's gain formula increases with the number of antennas at relay which can be overcome by the proposed linear algebraic method. Input-output relationship derived using simple concepts of linear algebra can be generalized to any number of antennas and the computation complexity is comparatively very low.
For a full-duplex amplify-and-forward MIMO relay system, assuming equalization at the destination, new mechanisms have been implemented at the relay that can compensate the effect of residual self-interference namely equal-gain transmission and antenna selection. Though equal-gain transmission does not perform better than the maximal ratio transmission, a trade-off can be made between performance and implementation complexity. Using the proposed antenna selection strategy, one pair of transmit-receive antennas at the relay is selected based on four selection criteria discussed. Outage probability analysis is performed for all the strategies presented and detailed comparison has been established. Considering minimum mean-squared error decision feedback equalizer at the destination, a bound on the outage probability has been obtained for the antenna selection case and is used for comparisons. A cross-over point is observed while comparing the outage probabilities of equal-gain transmission and antenna selection techniques, as the signal-to-noise ratio increases and from that point antenna selection outperforms equal-gain transmission and this is explained by the fact of reduced residual self-interference in antenna selection method.
This thesis considers a full-duplex MIMO relay which amplifies and forwards the received signals, between a source and a destination that do not a have line of sight. Full-duplex mode raises the problem of self-interference. Though all the links in the system undergo frequency flat fading, the end-to-end effective channel is frequency selective. This is due to the imperfect cancellation of the self-interference at the relay and this residual self-interference acts as intersymbol interference at the destination which is treated by equalization. This also leads to complications in form of recursive equations to determine the input-output relationship of the system. This also leads to complications in the form of recursive equations to determine the input-output relationship of the system.
To overcome this, a signal flow graph approach using Mason's gain formula is proposed, where the effective channel is analyzed with keen notice to every loop and path the signal traverses. This gives a clear understanding and awareness about the orders of the polynomials involved in the transfer function, from which desired conclusions can be drawn. But the complexity of Mason's gain formula increases with the number of antennas at relay which can be overcome by the proposed linear algebraic method. Input-output relationship derived using simple concepts of linear algebra can be generalized to any number of antennas and the computation complexity is comparatively very low.
For a full-duplex amplify-and-forward MIMO relay system, assuming equalization at the destination, new mechanisms have been implemented at the relay that can compensate the effect of residual self-interference namely equal-gain transmission and antenna selection. Though equal-gain transmission does not perform better than the maximal ratio transmission, a trade-off can be made between performance and implementation complexity. Using the proposed antenna selection strategy, one pair of transmit-receive antennas at the relay is selected based on four selection criteria discussed. Outage probability analysis is performed for all the strategies presented and detailed comparison has been established. Considering minimum mean-squared error decision feedback equalizer at the destination, a bound on the outage probability has been obtained for the antenna selection case and is used for comparisons. A cross-over point is observed while comparing the outage probabilities of equal-gain transmission and antenna selection techniques, as the signal-to-noise ratio increases and from that point antenna selection outperforms equal-gain transmission and this is explained by the fact of reduced residual self-interference in antenna selection method.
ContributorsJonnalagadda, Geeta Sankar Kalyan (Author) / Tepedelenlioğlu, Cihan (Thesis advisor) / Bliss, Daniel (Committee member) / Kosut, Oliver (Committee member) / Arizona State University (Publisher)
Created2018
Description
QR decomposition (QRD) of a matrix is one of the most common linear algebra operationsused for the decomposition of a square
on-square matrix. It has a wide range
of applications especially in Multiple Input-Multiple Output (MIMO) communication
systems. Unfortunately it has high computation complexity { for matrix size of nxn,
QRD has O(n3) complexity and back substitution, which is used to solve a system
of linear equations, has O(n2) complexity. Thus, as the matrix size increases, the
hardware resource requirement for QRD and back substitution increases signicantly.
This thesis presents the design and implementation of a
exible QRD and back substitution accelerator using a folded architecture. It can support matrix sizes of
4x4, 8x8, 12x12, 16x16, and 20x20 with low hardware resource requirement.
The proposed architecture is based on the systolic array implementation of the
Givens algorithm for QRD. It is built with three dierent types of computation blocks
which are connected in a 2-D array structure. These blocks are controlled by a
scheduler which facilitates reusability of the blocks to perform computation for any
input matrix size which is a multiple of 4. These blocks are designed using two
basic programming elements which support both the forward and backward paths to
compute matrix R in QRD and column-matrix X in back substitution computation.
The proposed architecture has been mapped to Xilinx Zynq Ultrascale+ FPGA
(Field Programmable Gate Array), ZCU102. All inputs are complex with precision
of 40 bits (38 fractional bits and 1 signed bit). The architecture can be clocked at
50 MHz. The synthesis results of the folded architecture for dierent matrix sizes
are presented. The results show that the folded architecture can support QRD and
back substitution for inputs of large sizes which otherwise cannot t on an FPGA
when implemented using a
at architecture. The memory sizes required for dierent
matrix sizes are also presented.
on-square matrix. It has a wide range
of applications especially in Multiple Input-Multiple Output (MIMO) communication
systems. Unfortunately it has high computation complexity { for matrix size of nxn,
QRD has O(n3) complexity and back substitution, which is used to solve a system
of linear equations, has O(n2) complexity. Thus, as the matrix size increases, the
hardware resource requirement for QRD and back substitution increases signicantly.
This thesis presents the design and implementation of a
exible QRD and back substitution accelerator using a folded architecture. It can support matrix sizes of
4x4, 8x8, 12x12, 16x16, and 20x20 with low hardware resource requirement.
The proposed architecture is based on the systolic array implementation of the
Givens algorithm for QRD. It is built with three dierent types of computation blocks
which are connected in a 2-D array structure. These blocks are controlled by a
scheduler which facilitates reusability of the blocks to perform computation for any
input matrix size which is a multiple of 4. These blocks are designed using two
basic programming elements which support both the forward and backward paths to
compute matrix R in QRD and column-matrix X in back substitution computation.
The proposed architecture has been mapped to Xilinx Zynq Ultrascale+ FPGA
(Field Programmable Gate Array), ZCU102. All inputs are complex with precision
of 40 bits (38 fractional bits and 1 signed bit). The architecture can be clocked at
50 MHz. The synthesis results of the folded architecture for dierent matrix sizes
are presented. The results show that the folded architecture can support QRD and
back substitution for inputs of large sizes which otherwise cannot t on an FPGA
when implemented using a
at architecture. The memory sizes required for dierent
matrix sizes are also presented.
ContributorsKanagala, Srimayee (Author) / Chakrabarti, Chaitali (Thesis advisor) / Bliss, Daniel (Committee member) / Cao, Yu (Kevin) (Committee member) / Arizona State University (Publisher)
Created2020