Matching Items (7)
Filtering by
- Genre: Masters Thesis
- Creators: Arizona State University
- Creators: Chakraborty, Bijeta
- Member of: ASU Electronic Theses and Dissertations
Description
Efficiency of components is an ever increasing area of importance to portable applications, where a finite battery means finite operating time. Higher efficiency devices need to be designed that don't compromise on the performance that the consumer has come to expect. Class D amplifiers deliver on the goal of increased efficiency, but at the cost of distortion. Class AB amplifiers have low efficiency, but high linearity. By modulating the supply voltage of a Class AB amplifier to make a Class H amplifier, the efficiency can increase while still maintaining the Class AB level of linearity. A 92dB Power Supply Rejection Ratio (PSRR) Class AB amplifier and a Class H amplifier were designed in a 0.24um process for portable audio applications. Using a multiphase buck converter increased the efficiency of the Class H amplifier while still maintaining a fast response time to respond to audio frequencies. The Class H amplifier had an efficiency above the Class AB amplifier by 5-7% from 5-30mW of output power without affecting the total harmonic distortion (THD) at the design specifications. The Class H amplifier design met all design specifications and showed performance comparable to the designed Class AB amplifier across 1kHz-20kHz and 0.01mW-30mW. The Class H design was able to output 30mW into 16Ohms without any increase in THD. This design shows that Class H amplifiers merit more research into their potential for increasing efficiency of audio amplifiers and that even simple designs can give significant increases in efficiency without compromising linearity.
ContributorsPeterson, Cory (Author) / Bakkaloglu, Bertan (Thesis advisor) / Barnaby, Hugh (Committee member) / Kiaei, Sayfe (Committee member) / Arizona State University (Publisher)
Created2013
Description
The objective of this thesis is to detect certain cyber attacks in a power distribution ener-gy management system in a Smart Grid infrastructure. In the Smart Grid, signals are sent be-tween the distribution operator and the customer on a real-time basis. Signals are used for auto-mated energy management, protection and energy metering. This thesis aims at making use of various signals in the system to detect cyber attacks. The focus of the thesis is on a cyber attack that changes the parameters of the energy management system. The attacks considered change the set points, thresholds for energy management decisions, signal multipliers, and other digitally stored parameters that ultimately determine the transfer functions of the components. Since the distribution energy management system is assumed to be in a Smart Grid infrastructure, customer demand is elastic to the price of energy. The energy pricing is represented by a distribution loca-tional marginal price. A closed loop control system is utilized as representative of the energy management system. Each element of the system is represented by a linear transfer function. Studies are done via simulations and these simulations are performed in Matlab SimuLink. The analytical calculations are done using Matlab.
Signals from the system are used to obtain the frequency response of the component transfer functions. The magnitude and phase angle of the transfer functions are obtained using the fast Fourier transform. The transfer function phase angles of base cases (no attack) are stored and are compared with the phase angles calculated at regular time intervals. If the difference in the phase characteristics is greater than a set threshold, an alarm is issued indicating the detection of a cyber attack.
The developed algorithm is designed for use in the envisioned Future Renewable Electric Energy Delivery and Management (FREEDM) system. Examples are shown for the noise free and noisy cases.
Signals from the system are used to obtain the frequency response of the component transfer functions. The magnitude and phase angle of the transfer functions are obtained using the fast Fourier transform. The transfer function phase angles of base cases (no attack) are stored and are compared with the phase angles calculated at regular time intervals. If the difference in the phase characteristics is greater than a set threshold, an alarm is issued indicating the detection of a cyber attack.
The developed algorithm is designed for use in the envisioned Future Renewable Electric Energy Delivery and Management (FREEDM) system. Examples are shown for the noise free and noisy cases.
ContributorsRavi, Vaithinathan (Author) / Heydt, Gerald T (Thesis advisor) / Karady, George G. (Committee member) / Sankar, Lalitha (Committee member) / Arizona State University (Publisher)
Created2014
Description
This thesis describes a synthetic task environment, CyberCog, created for the purposes of 1) understanding and measuring individual and team situation awareness in the context of a cyber security defense task and 2) providing a context for evaluating algorithms, visualizations, and other interventions that are intended to improve cyber situation awareness. CyberCog provides an interactive environment for conducting human-in-loop experiments in which the participants of the experiment perform the tasks of a cyber security defense analyst in response to a cyber-attack scenario. CyberCog generates the necessary performance measures and interaction logs needed for measuring individual and team cyber situation awareness. Moreover, the CyberCog environment provides good experimental control for conducting effective situation awareness studies while retaining realism in the scenario and in the tasks performed.
ContributorsRajivan, Prashanth (Author) / Femiani, John (Thesis advisor) / Cooke, Nancy J. (Thesis advisor) / Lindquist, Timothy (Committee member) / Gary, Kevin (Committee member) / Arizona State University (Publisher)
Created2011
Description
Class D Amplifiers are widely used in portable systems such as mobile phones to achieve high efficiency. The demands of portable electronics for low power consumption to extend battery life and reduce heat dissipation mandate efficient, high-performance audio amplifiers. The high efficiency of Class D amplifiers (CDAs) makes them particularly attractive for portable applications. The Digital class D amplifier is an interesting solution to increase the efficiency of embedded systems. However, this solution is not good enough in terms of PWM stage linearity and power supply rejection. An efficient control is needed to correct the error sources in order to get a high fidelity sound quality in the whole audio range of frequencies. A fundamental analysis on various error sources due to non idealities in the power stage have been discussed here with key focus on Power supply perturbations driving the Power stage of a Class D Audio Amplifier. Two types of closed loop Digital Class D architecture for PSRR improvement have been proposed and modeled. Double sided uniform sampling modulation has been used. One of the architecture uses feedback around the power stage and the second architecture uses feedback into digital domain. Simulation & experimental results confirm that the closed loop PSRR & PS-IMD improve by around 30-40 dB and 25 dB respectively.
ContributorsChakraborty, Bijeta (Author) / Bakkaloglu, Bertan (Thesis advisor) / Garrity, Douglas (Committee member) / Ozev, Sule (Committee member) / Arizona State University (Publisher)
Created2012
Description
The large distributed electric power system is a hierarchical network involving the
transportation of power from the sources of power generation via an intermediate
densely connected transmission network to a large distribution network of end-users
at the lowest level of the hierarchy. At each level of the hierarchy (generation/ trans-
mission/ distribution), the system is managed and monitored with a combination of
(a) supervisory control and data acquisition (SCADA); and (b) energy management
systems (EMSs) that process the collected data and make control and actuation de-
cisions using the collected data. However, at all levels of the hierarchy, both SCADA
and EMSs are vulnerable to cyber attacks. Furthermore, given the criticality of the
electric power infrastructure, cyber attacks can have severe economic and social con-
sequences.
This thesis focuses on cyber attacks on SCADA and EMS at the transmission
level of the electric power system. The goal is to study the consequences of three
classes of cyber attacks that can change topology data. These classes include: (i)
unobservable state-preserving cyber attacks that only change the topology data; (ii)
unobservable state-and-topology cyber-physical attacks that change both states and
topology data to enable a coordinated physical and cyber attack; and (iii) topology-
targeted man-in-the-middle (MitM) communication attacks that alter topology data
shared during inter-EMS communication. Specically, attack class (i) and (ii) focus on
the unobservable attacks on single regional EMS while class (iii) focuses on the MitM
attacks on communication links between regional EMSs. For each class of attacks,
the theoretical attack model and the implementation of attacks are provided, and the
worst-case attack and its consequences are exhaustively studied. In particularly, for
class (ii), a two-stage optimization problem is introduced to study worst-case attacks
that can cause a physical line over
ow that is unobservable in the cyber layer. The long-term implication and the system anomalies are demonstrated via simulation.
For attack classes (i) and (ii), both mathematical and experimental analyses sug-
gest that these unobservable attacks can be limited or even detected with resiliency
mechanisms including load monitoring, anomalous re-dispatches checking, and his-
torical data comparison. For attack class (iii), countermeasures including anomalous
tie-line interchange verication, anomalous re-dispatch alarms, and external contin-
gency lists sharing are needed to thwart such attacks.
transportation of power from the sources of power generation via an intermediate
densely connected transmission network to a large distribution network of end-users
at the lowest level of the hierarchy. At each level of the hierarchy (generation/ trans-
mission/ distribution), the system is managed and monitored with a combination of
(a) supervisory control and data acquisition (SCADA); and (b) energy management
systems (EMSs) that process the collected data and make control and actuation de-
cisions using the collected data. However, at all levels of the hierarchy, both SCADA
and EMSs are vulnerable to cyber attacks. Furthermore, given the criticality of the
electric power infrastructure, cyber attacks can have severe economic and social con-
sequences.
This thesis focuses on cyber attacks on SCADA and EMS at the transmission
level of the electric power system. The goal is to study the consequences of three
classes of cyber attacks that can change topology data. These classes include: (i)
unobservable state-preserving cyber attacks that only change the topology data; (ii)
unobservable state-and-topology cyber-physical attacks that change both states and
topology data to enable a coordinated physical and cyber attack; and (iii) topology-
targeted man-in-the-middle (MitM) communication attacks that alter topology data
shared during inter-EMS communication. Specically, attack class (i) and (ii) focus on
the unobservable attacks on single regional EMS while class (iii) focuses on the MitM
attacks on communication links between regional EMSs. For each class of attacks,
the theoretical attack model and the implementation of attacks are provided, and the
worst-case attack and its consequences are exhaustively studied. In particularly, for
class (ii), a two-stage optimization problem is introduced to study worst-case attacks
that can cause a physical line over
ow that is unobservable in the cyber layer. The long-term implication and the system anomalies are demonstrated via simulation.
For attack classes (i) and (ii), both mathematical and experimental analyses sug-
gest that these unobservable attacks can be limited or even detected with resiliency
mechanisms including load monitoring, anomalous re-dispatches checking, and his-
torical data comparison. For attack class (iii), countermeasures including anomalous
tie-line interchange verication, anomalous re-dispatch alarms, and external contin-
gency lists sharing are needed to thwart such attacks.
ContributorsZhang, Jiazi (Author) / Sankar, Lalitha (Thesis advisor) / Hedman, Kory (Committee member) / Kosut, Oliver (Committee member) / Arizona State University (Publisher)
Created2015
Description
In this thesis, a digital input class D audio amplifier system which has the ability
to reject the power supply noise and nonlinearly of the output stage is presented. The main digital class D feed-forward path is using the fully-digital sigma-delta PWM open loop topology. Feedback loop is used to suppress the power supply noise and harmonic distortions. The design is using global foundry 0.18um technology.
Based on simulation, the power supply rejection at 200Hz is about -49dB with
81dB dynamic range and -70dB THD+N. The full scale output power can reach as high as 27mW and still keep minimum -68dB THD+N. The system efficiency at full scale is about 82%.
to reject the power supply noise and nonlinearly of the output stage is presented. The main digital class D feed-forward path is using the fully-digital sigma-delta PWM open loop topology. Feedback loop is used to suppress the power supply noise and harmonic distortions. The design is using global foundry 0.18um technology.
Based on simulation, the power supply rejection at 200Hz is about -49dB with
81dB dynamic range and -70dB THD+N. The full scale output power can reach as high as 27mW and still keep minimum -68dB THD+N. The system efficiency at full scale is about 82%.
ContributorsBai, Jing (Author) / Bakkaloglu, Bertan (Thesis advisor) / Arizona State University (Publisher)
Created2015
Description
Detecting cyber-attacks in cyber systems is essential for protecting cyber infrastructures from cyber-attacks. It is very difficult to detect cyber-attacks in cyber systems due to their high complexity. The accuracy of the attack detection in the cyber systems depends heavily on the completeness of the collected sensor information. In this thesis, two approaches are presented: one to detecting attacks in completely observable cyber systems, and the other to estimating types of states in partially observable cyber systems for attack detection in cyber systems. These two approaches are illustrated using three large data sets of network traffic because the packet-level information of the network traffic data provides details about the cyber systems.
The approach to attack detection in cyber systems is based on a multimodal artificial neural network (MANN) using the collected network traffic data from completely observable cyber systems for training and testing. Since the training of MANN is computationally intensive, to reduce the computational overhead, an efficient feature selection algorithm using the genetic algorithm is developed and incorporated in this approach.
In order to detect attacks in cyber systems in partially observable environments, an approach to estimating the types of states in partially observable cyber systems, which is the first phase of attack detection in cyber systems in partially observable environments, is presented. The types of states of such cyber systems are useful to detecting cyber-attacks in such cyber systems. This approach involves the use of a convolutional neural network (CNN), and unsupervised learning with elbow method and k-means clustering algorithm.
The approach to attack detection in cyber systems is based on a multimodal artificial neural network (MANN) using the collected network traffic data from completely observable cyber systems for training and testing. Since the training of MANN is computationally intensive, to reduce the computational overhead, an efficient feature selection algorithm using the genetic algorithm is developed and incorporated in this approach.
In order to detect attacks in cyber systems in partially observable environments, an approach to estimating the types of states in partially observable cyber systems, which is the first phase of attack detection in cyber systems in partially observable environments, is presented. The types of states of such cyber systems are useful to detecting cyber-attacks in such cyber systems. This approach involves the use of a convolutional neural network (CNN), and unsupervised learning with elbow method and k-means clustering algorithm.
ContributorsGuha, Sayantan (Author) / Yau, Stephen S. (Thesis advisor) / Ahn, Gail-Joon (Committee member) / Huang, Dijiang (Committee member) / Arizona State University (Publisher)
Created2016