Matching Items (21)
Filtering by
- All Subjects: Geotechnology
- Creators: Kavazanjian, Edward
- Creators: Witczak, Matthew
Description
A method for evaluating the integrity of geosynthetic elements of a waste containment system subject to seismic loading is developed using a large strain finite difference numerical computer program. The method accounts for the effect of interaction between the geosynthetic elements and the overlying waste on seismic response and allows for explicit calculation of forces and strains in the geosynthetic elements. Based upon comparison of numerical results to experimental data, an elastic-perfectly plastic interface model is demonstrated to adequately reproduce the cyclic behavior of typical geomembrane-geotextile and geomembrane-geomembrane interfaces provided the appropriate interface properties are used. New constitutive models are developed for the in-plane cyclic shear behavior of textured geomembrane/geosynthetic clay liner (GMX/GCL) interfaces and GCLs. The GMX/GCL model is an empirical model and the GCL model is a kinematic hardening, isotropic softening multi yield surface plasticity model. Both new models allows for degradation in the cyclic shear resistance from a peak to a large displacement shear strength. The ability of the finite difference model to predict forces and strains in a geosynthetic element modeled as a beam element with zero moment of inertia sandwiched between two interface elements is demonstrated using hypothetical models of a heap leach pad and two typical landfill configurations. The numerical model is then used to conduct back analyses of the performance of two lined municipal solid waste (MSW) landfills subjected to strong ground motions in the Northridge earthquake. The modulus reduction "backbone curve" employed with the Masing criterion and 2% Rayleigh damping to model the cyclic behavior of MSW was established by back-analysis of the response of the Operating Industries Inc. landfill to five different earthquakes, three small magnitude nearby events and two larger magnitude distant events. The numerical back analysis was able to predict the tears observed in the Chiquita Canyon Landfill liner system after the earthquake if strain concentrations due to seams and scratches in the geomembrane are taken into account. The apparent good performance of the Lopez Canyon landfill geomembrane and the observed tension in the overlying geotextile after the Northridge event was also successfully predicted using the numerical model.
ContributorsArab, Mohamed G (Author) / Kavazanjian, Edward (Thesis advisor) / Zapata, Claudia (Committee member) / Houston, Sandra (Committee member) / Arizona State University (Publisher)
Created2011
Description
The structural design of pavements in both highways and airfields becomes complex when one considers environmental effects and ground water table variation. Environmental effects have been incorporated on the new Mechanistic-Empirical Pavement Design Guide (MEPDG) but little has been done to incorporate environmental effects on airfield design. This work presents a developed code produced from this research study called ZAPRAM, which is a mechanistically based pavement model based upon Limiting Strain Criteria in airfield HMA pavement design procedures. ZAPRAM is capable of pavement and airfield design analyses considering environmental effects. The program has been coded in Visual Basic and implemented in an event-driven, user-friendly educational computer program, which runs in Excel environment. Several studies were conducted in order to insure the validity of the analysis as well as the efficiency of the software. The first study yielded the minimum threshold number of computational points the user should use at a specific depth within the pavement system. The second study was completed to verify the correction factor for the Odemark's transformed thickness equation. Default correction factors were included in the code base on a large comparative study between Odemark's and MLET. A third study was conducted to provide a comparison of flexible airfield pavement design thicknesses derived from three widely accepted design procedures used in practice today: the Asphalt Institute, Shell Oil, and the revised Corps of Engineering rutting failure criteria to calculate the thickness requirements necessary for a range of design input variables. The results of the comparative study showed that there is a significant difference between the pavement thicknesses obtained from the three design procedures, with the greatest deviation found between the Shell Oil approach and the other two criteria. Finally, a comprehensive sensitivity study of environmental site factors and the groundwater table depth upon flexible airfield pavement design and performance was completed. The study used the newly revised USACE failure criteria for subgrade shear deformation. The methodology utilized the same analytical methodology to achieve real time environmental effects upon unbound layer modulus, as that used in the new AASHTO MEPDG. The results of this effort showed, for the first time, the quantitative impact of the significant effects of the climatic conditions at the design site, coupled with the importance of the depth of the groundwater table, on the predicted design thicknesses. Significant cost savings appear to be quite reasonable by utilizing principles of unsaturated soil mechanics into the new airfield pavement design procedure found in program ZAPRAM.
ContributorsSalim, Ramadan A (Author) / Zapata, Claudia (Thesis advisor) / Witczak, Matthew (Thesis advisor) / Kaloush, Kamil (Committee member) / Arizona State University (Publisher)
Created2011
Description
As a prelude to a study on the post-liquefaction properties and structure of soil, an investigation of ground freezing as an undisturbed sampling technique was conducted to investigate the ability of this sampling technique to preserve soil structure and properties. Freezing the ground is widely regarded as an appropriate technique to recover undisturbed samples of saturated cohesionless soil for laboratory testing, despite the fact that water increases in volume when frozen. The explanation generally given for the preservation of soil structure using the freezing technique was that, as long as the freezing front advanced uni-directionally, the expanding pore water is expelled ahead of the freezing front as the front advances. However, a literature review on the transition of water to ice shows that the volume of ice expands approximately nine percent after freezing, bringing into question the hypothesized mechanism and the ability of a frozen and then thawed specimen to retain the properties and structure of the soil in situ. Bench-top models were created by pluviation of sand. The soil in the model was then saturated and subsequently frozen. Freezing was accomplished using a pan filled with alcohol and dry ice placed on the surface of the sand layer to induce a unidirectional freezing front in the sample container. Coring was used to recover frozen samples from model containers. Recovered cores were then placed in a triaxial cell, thawed, and subjected to consolidated undrained loading. The stress-strain-strength behavior of the thawed cores was compared to the behavior of specimens created in a split mold by pluviation and then saturated and sheared without freezing and thawing. The laboratory testing provide insight to the impact of freezing and thawing on the properties of cohesionless soil.
ContributorsKatapa, Kanyembo (Author) / Kavazanjian, Edward (Thesis advisor) / Houston, Sandra (Committee member) / Zapata, Claudia (Committee member) / Arizona State University (Publisher)
Created2011
Description
The objective of the research is to develop guidelines for identifying when settlement or seismic loading presents a threat to the integrity of geosynthetic elements for both side slope and cover systems in landfills, and advance further investigation for parameters which influence the strains in the barrier systems. A numerical model of landfill with different side slope inclinations are developed by the two-dimensional explicit finite difference program FLAC 7.0, beam elements with a hyperbolic stress-strain relationship, zero moment of inertia, and interface elements on both sides were used to model the geosynthetic barrier systems. The resulting numerical model demonstrates the load-displacement behavior of geosynthetic interfaces, including whole liner systems and dynamic shear response. It is also through the different results in strains from the influences of slope angle and interface friction of geosynthetic liners to develop implications for engineering practice and recommendations for static and seismic design of waste containment systems.
ContributorsWu, Xuan (Author) / Kavazanjian, Edward (Thesis advisor) / Zapata, Claudia (Committee member) / Houston, Sandra (Committee member) / Arizona State University (Publisher)
Created2013
Description
Microbially induced calcium carbonate precipitation (MICP) is attracting increasing attention as a sustainable means of soil improvement. While there are several possible MICP mechanisms, microbial denitrification has the potential to become one of the preferred methods for MICP because complete denitrification does not produce toxic byproducts, readily occurs under anoxic conditions, and potentially has a greater carbonate yield per mole of organic electron donor than other MICP processes. Denitrification may be preferable to ureolytic hydrolysis, the MICP process explored most extensively to date, as the byproduct of denitrification is benign nitrogen gas, while the chemical pathways involved in hydrolytic ureolysis processes produce undesirable and potentially toxic byproducts such as ammonium (NH4+). This thesis focuses on bacterial denitrification and presents preliminary results of bench-scale laboratory experiments on denitrification as a candidate calcium carbonate precipitation mechanism. The bench-scale bioreactor and column tests, conducted using the facultative anaerobic bacterium Pseudomonas denitrificans, show that calcite can be precipitated from calcium-rich pore water using denitrification. Experiments also explore the potential for reducing environmental impacts and lowering costs associated with denitrification by reducing the total dissolved solids in the reactors and columns, optimizing the chemical matrix, and addressing the loss of free calcium in the form of calcium phosphate precipitate from the pore fluid. The potential for using MICP to sequester radionuclides and metal contaminants that are migrating in groundwater is also investigated. In the sequestration process, divalent cations and radionuclides are incorporated into the calcite structure via substitution, forming low-strontium calcium carbonate minerals that resist dissolution at a level similar to that of calcite. Work by others using the bacterium Sporosarcina pasteurii has suggested that in-situ sequestration of radionuclides and metal contaminants can be achieved through MICP via hydrolytic ureolysis. MICP through bacterial denitrification seems particularly promising as a means for sequestering radionuclides and metal contaminants in anoxic environments due to the anaerobic nature of the process and the ubiquity of denitrifying bacteria in the subsurface.
ContributorsHamdan, Nasser (Author) / Kavazanjian, Edward (Thesis advisor) / Rittmann, Bruce E. (Thesis advisor) / Shock, Everett (Committee member) / Arizona State University (Publisher)
Created2013
Description
In a laboratory setting, the soil volume change behavior is best represented by using various testing standards on undisturbed or remolded samples. Whenever possible, it is most precise to use undisturbed samples to assess the volume change behavior but in the absence of undisturbed specimens, remodeled samples can be used. If that is the case, the soil is compacted to in-situ density and water content (or matric suction), which should best represent the expansive profile in question. It is standard practice to subject the specimen to a wetting process at a particular net normal stress. Even though currently accepted laboratory testing standard procedures provide insight on how the profile conditions changes with time, these procedures do not assess the long term effects on the soil due to climatic changes. In this experimental study, an assessment and quantification of the effect of multiple wetting/drying cycles on the volume change behavior of two different naturally occurring soils was performed. The changes in wetting and drying cycles were extreme when comparing the swings in matric suction. During the drying cycle, the expansive soil was subjected to extreme conditions, which decreased the moisture content less than the shrinkage limit. Nevertheless, both soils were remolded at five different compacted conditions and loaded to five different net normal stresses. Each sample was subjected to six wetting and drying cycles. During the assessment, it was evident from the results that the swell/collapse strain is highly non-linear at low stress levels. The strain-net normal stress relationship cannot be defined by one single function without transforming the data. Therefore, the dataset needs to be fitted to a bi-modal logarithmic function or to a logarithmic transformation of net normal stress in order to use a third order polynomial fit. It was also determined that the moisture content changes with time are best fit by non-linear functions. For the drying cycle, the radial strain was determined to have a constant rate of change with respect to the axial strain. However, for the wetting cycle, there was not enough radial strain data to develop correlations and therefore, an assumption was made based on 55 different test measurements/observations, for the wetting cycles. In general, it was observed that after each subsequent cycle, higher swelling was exhibited for lower net normal stress values; while higher collapse potential was observed for higher net normal stress values, once the net normal stress was less than/greater than a threshold net normal stress value. Furthermore, the swelling pressure underwent a reduction in all cases. Particularly, the Anthem soil exhibited a reduction in swelling pressure by at least 20 percent after the first wetting/drying cycle; while Colorado soil exhibited a reduction of 50 percent. After about the fourth cycle, the swelling pressure seemed to stabilized to an equilibrium value at which a reduction of 46 percent was observed for the Anthem soil and 68 percent reduction for the Colorado soil. The impact of the initial compacted conditions on heave characteristics was studied. Results indicated that materials compacted at higher densities exhibited greater swell potential. When comparing specimens compacted at the same density but at different moisture content (matric suction), it was observed that specimens compacted at higher suction would exhibit higher swelling potential, when subjected to the same net normal stress. The least amount of swelling strain was observed on specimens compacted at the lowest dry density and the lowest matric suction (higher water content). The results from the laboratory testing were used to develop ultimate heave profiles for both soils. This analysis showed that even though the swell pressure for each soil decreased with cycles, the amount of heave would increase or decrease depending upon the initial compaction condition. When the specimen was compacted at 110% of optimum moisture content and 90% of maximum dry density, it resulted in an ultimate heave reduction of 92 percent for Anthem and 685 percent for Colorado soil. On the other hand, when the soils were compacted at 90% optimum moisture content and 100% of the maximum dry density, Anthem specimens heave 78% more and Colorado specimens heave was reduced by 69%. Based on the results obtained, it is evident that the current methods to estimate heave and swelling pressure do not consider the effect of wetting/drying cycles; and seem to fail capturing the free swell potential of the soil. Recommendations for improvement current methods of practice are provided.
ContributorsRosenbalm, Daniel Curtis (Author) / Zapata, Claudia E (Thesis advisor) / Houston, Sandra L. (Committee member) / Kavazanjian, Edward (Committee member) / Witczak, Mathew W (Committee member) / Arizona State University (Publisher)
Created2013
Description
Two challenges in the implementation of enzyme induced carbonate precipitation(EICP) are the cost of enzyme and the variability of the enzyme. Urease enzyme costs
can be lowered drastically with the use of crude extract from plant materials, but
experience has shown variability in the source of the crude urease enzyme, the crude
urease enzyme extraction methods, and the concentration of the EICP solution can cause
significant variability in the efficacy of the EICP solution.
This thesis examines the variability in the efficacy of crude enzyme derived from
jack beans (Canavalia ensiformis) and sword beans (Canavalia gladiata), two of the
most commonly used sources of urease enzyme for EICP. The sources of variability
investigated herein include the crude extraction method (including the effect of the bean
husks on extraction) and different chemical constituent concentrations. These effects
were assessed using enzyme activity measurements and precipitation efficiency tests. The
activity tests were performed via spectrophotometry using Nessler's reagent. The
precipitation tests looked at the influence of chemical constituent concentrations of 0.67
M calcium chloride and 1 M urea with non-fat dry milk in the EICP solutions and a
higher concentration solution with chemical constituent concentrations of 2 M for both
calcium chloride and urea with non-fat dry milk. The high concentration solution was
selected based on preliminary testing results to maximize carbonate precipitation in one
cycle of treatment. Significant sources of a decline in activity (and increase in variation)
of the crude urease enzyme were found in extraction from sword beans with husks, high
chemical constituent concentrations, and juicing instead of cheesecloth filtration.
This thesis also examines the accuracy of commonly used correlation factors for
converting electrical conductivity to urease enzyme activity. Crude jack bean and sword
bean urease enzyme activity measurement via electrical conductivity was found to have a
correlation coefficient that differed from the previously reported correlation when
compared to activity measured via the more accurate spectrophotometry using Nessler’s
reagent measurements.
ContributorsPearson, Rayanna (Author) / Kavazanjian, Edward (Thesis advisor) / Khodadadi Tirkolaei, Hamed (Committee member) / Salifu, Emmanuel (Committee member) / Arizona State University (Publisher)
Created2022
Description
The climate-driven volumetric response of unsaturated soils (shrink-swell and frost heave) frequently causes costly distresses in lightly loaded structures (pavements and shallow foundations) due to the sporadic climatic fluctuations and soil heterogeneity which is not captured during the geotechnical design. The complexity associated with the unsaturated soil mechanics combined with the high degree of variability in both the natural characteristics of soil and the empirical models which are commonly implemented tends to lead to engineering judgment outweighing the results of deterministic computations for the basis of design. Recent advances in the application of statistical techniques and Bayesian Inference in geotechnical modeling allows for the inclusion of both parameter and model uncertainty, providing a quantifiable representation of this invaluable engineering judgement. The overall goal achieved in this study was to develop, validate, and implement a new method to evaluate climate-driven volume change of shrink-swell soils using a framework that encompasses predominantly stochastic time-series techniques and mechanistic shrink-swell volume change computations. Four valuable objectives were accomplished during this research study while on the path to complete the overall goal: 1) development of an procedure for automating the selection of the Fourier Series form of the soil suction diffusion equations used to represent the natural seasonal variations in suction at the ground surface, 2) development of an improved framework for deterministic estimation of shrink-swell soil volume change using historical climate data and the Fourier series suction model, 3) development of a Bayesian approach to randomly generate combinations of correlated soil properties for use in stochastic simulations, and 4) development of a procedure to stochastically forecast the climatic parameters required for shrink-swell soil volume change estimations. The models presented can be easily implemented into existing foundation and pavement design procedures or used for forensic evaluations using historical data. For pavement design, the new framework for stochastically forecasting the variability of shrink-swell soil volume change provides significant improvement over the existing empirical models that have been used for more than four decades.
ContributorsOlaiz, Austin Hunter (Author) / Zapata, Claudia (Thesis advisor) / Houston, Sandra (Committee member) / Kavazanjian, Edward (Committee member) / Soltanpour, Yasser (Committee member) / Arizona State University (Publisher)
Created2022
Description
This Master's thesis presents an experimental testing program conducted to assess the properties of coarse tailings from two Arizona copper mine heap leach pads. This testing program was motivated by recent failures in tailings impoundments, which has prompted a re-evaluation of tailings deposit stability worldwide. The testing was conducted using a unique large-scale Direct-Simple Shear (LDSS) device at Arizona State University (ASU). Prior to testing the tailings, the LDSS device had to be rehabilitated, as it had not been used for several years. The testing program included one-dimensional compression testing, shear wave velocity measurement, and monotonic shearing under constant volume conditions. The test results demonstrate the effectiveness of the LDSS device in obtaining representative data for tailings under monotonic loading. Recommendations for future improvements of the LDSS include enhancing the connection of monitoring instruments, utilizing more sophisticated software for shear wave velocity measurements, and optimizing the control system. The thesis contributes to geotechnical engineering by improving understanding and evaluation of tailings properties, thereby enhancing safety and environmental sustainability in the mining industry.
ContributorsHarker, Jack Michael (Author) / Kavazanjian, Edward (Thesis advisor) / Zapata, Claudia (Committee member) / Razmi, Jafar (Committee member) / Arizona State University (Publisher)
Created2023
Description
Microbially- and enzyme-induced carbonate precipitation (EICP and MICP) offer potentially sustainable and cost-effective mitigation methods for fugitive dust by forming an erosion-resistant crust on the soil through precipitation of a natural calcium carbonate (CaCO3) cement. While there have been isolated studies on the efficacy of the carbonate precipitation process, there are few systematic studies of the influence of the properties of the soil being treated (e.g., gradation, salt content) on the precipitation and the resulting wind erosion resistance. Moreover, the influence of environmental conditions on the durability of the crust formed by the induced carbonate precipitation has not been systematically investigated. In this research program, the efficacy and durability of EICP and MICP for dust mitigation were investigated for a variety of soil types and in different environmental conditions. Soil samples from seven sites with fugitive dust problems were treated with MICP or EICP and subjected to lab or field testing. The results of these tests showed that the effectiveness of biocementation treatment varies depending on the grain size distribution of soil and mineralogical composition. Testing on iron ore tailings materials demonstrated that treating by application of EICP solutions at lower concentrations (i.e., 0.5M and 0.75M of urea and calcium chloride) yielded effective results for poorly graded fine sand-sized tailings but the same solutions were ineffective for the well graded sand-sized tailings that contained large gravel-sized particles. Additionally, the application of MICP and EICP on sediments adjacent to a shrinking lake (the Salton Sea) with different salt contents exhibited enhanced performance in soils with lower salt content. The effect of temperature during deployment and precipitation cycles are shown to be significant environmental factors by simulating wetting-drying and freeze-thaw cycles in the laboratory. A dust-resistance crust formed through biocementation remained mostly intact after undergoing multiple cycles of wetting-drying. However, the durability of a dust-resistance crust formed through biocementation to multiple cycles of freeze-thaw depended on treatment solution concentration and soil grain size. Additionally, high temperature during field deployment of MICP adversely effected crust formation due to rapid evaporation that inhibited the complete hydrolysis of urea and the precipitation of carbonate.
ContributorsEhsasi, Farideh (Author) / Kavazanjian, Edward (Thesis advisor) / van Paassen, Leon (Committee member) / Khodadaditirkolaei, Hamed (Committee member) / Arizona State University (Publisher)
Created2023