Matching Items (6)
Filtering by
- All Subjects: ASIC
- Creators: Seo, Jae-Sun
Description
Flow measurement has always been one of the most critical processes in many industrial and clinical applications. The dynamic behavior of flow helps to define the state of a process. An industrial example would be that in an aircraft, where the rate of airflow passing the aircraft is used to determine the speed of the plane. A clinical example would be that the flow of a patient's breath which could help determine the state of the patient's lungs. This project is focused on the flow-meter that are used for airflow measurement in human lungs. In order to do these measurements, resistive-type flow-meters are commonly used in respiratory measurement systems. This method consists of passing the respiratory flow through a fluid resistive component, while measuring the resulting pressure drop, which is linearly related to volumetric flow rate. These types of flow-meters typically have a low frequency response but are adequate for most applications, including spirometry and respiration monitoring. In the case of lung parameter estimation methods, such as the Quick Obstruction Method, it becomes important to have a higher frequency response in the flow-meter so that the high frequency components in the flow are measurable. The following three types of flow-meters were: a. Capillary type b. Screen Pneumotach type c. Square Edge orifice type To measure the frequency response, a sinusoidal flow is generated with a small speaker and passed through the flow-meter that is connected to a large, rigid container. True flow is proportional to the derivative of the pressure inside the container. True flow is then compared with the measured flow, which is proportional to the pressure drop across the flow-meter. In order to do the characterization, two LabVIEW data acquisition programs have been developed, one for transducer calibration, and another one that records flow and pressure data for frequency response testing of the flow-meter. In addition, a model that explains the behavior exhibited by the flow-meter has been proposed and simulated. This model contains a fluid resistor and inductor in series. The final step in this project was to approximate the frequency response data to the developed model expressed as a transfer function.
ContributorsHu, Jianchen (Author) / Macia, Narciso (Thesis advisor) / Pollat, Scott (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2013
Description
Complex electronic systems include multiple power domains and drastically varying dynamic power consumption patterns, requiring the use of multiple power conversion and regulation units. High frequency switching converters have been gaining prominence in the DC-DC converter market due to smaller solution size (higher power density) and higher efficiency. As the filter components become smaller in value and size, they are unfortunately also subject to higher process variations and worse degradation profiles jeopardizing stable operation of the power supply. This dissertation presents techniques to track changes in the dynamic loop characteristics of the DC-DC converters without disturbing the normal mode of operation. A digital pseudo-noise (PN) based stimulus is used to excite the DC-DC system at various circuit nodes to calculate the corresponding closed-loop impulse response. The test signal energy is spread over a wide bandwidth and the signal analysis is achieved by correlating the PN input sequence with the disturbed output generated, thereby
accumulating the desired behavior over time. A mixed-signal cross-correlation circuit is used to derive on-chip impulse responses, with smaller memory and lower computational requirement in comparison to a digital correlator approach. Model reference based parametric and non-parametric techniques are discussed to analyze the impulse response results in both time and frequency domain. The proposed techniques can extract open-loop phase margin and closed-loop unity-gain frequency within 5.2% and 4.1% error, respectively, for the load current range of 30-200mA. Converter parameters such as natural frequency (ω_n ), quality factor (Q), and center frequency (ω_c ) can be estimated within 3.6%, 4.7%, and 3.8% error respectively, over load inductance of 4.7-10.3µH, and filter capacitance of 200-400nF. A 5-MHz switching frequency, 5-8.125V input voltage range, voltage-mode controlled DC-DC buck converter is designed for the proposed built-in self-test (BIST) analysis. The converter output voltage range is 3.3-5V and the supported maximum
load current is 450mA. The peak efficiency of the converter is 87.93%. The proposed converter is fabricated on a 0.6µm 6-layer-metal Silicon-On-Insulator (SOI) technology with a die area of 9mm^2 . The area impact due to the system identification blocks including related I/O structures is 3.8% and they consume 530µA quiescent current during operation.
accumulating the desired behavior over time. A mixed-signal cross-correlation circuit is used to derive on-chip impulse responses, with smaller memory and lower computational requirement in comparison to a digital correlator approach. Model reference based parametric and non-parametric techniques are discussed to analyze the impulse response results in both time and frequency domain. The proposed techniques can extract open-loop phase margin and closed-loop unity-gain frequency within 5.2% and 4.1% error, respectively, for the load current range of 30-200mA. Converter parameters such as natural frequency (ω_n ), quality factor (Q), and center frequency (ω_c ) can be estimated within 3.6%, 4.7%, and 3.8% error respectively, over load inductance of 4.7-10.3µH, and filter capacitance of 200-400nF. A 5-MHz switching frequency, 5-8.125V input voltage range, voltage-mode controlled DC-DC buck converter is designed for the proposed built-in self-test (BIST) analysis. The converter output voltage range is 3.3-5V and the supported maximum
load current is 450mA. The peak efficiency of the converter is 87.93%. The proposed converter is fabricated on a 0.6µm 6-layer-metal Silicon-On-Insulator (SOI) technology with a die area of 9mm^2 . The area impact due to the system identification blocks including related I/O structures is 3.8% and they consume 530µA quiescent current during operation.
ContributorsBeohar, Navankur (Author) / Bakkaloglu, Bertan (Thesis advisor) / Ozev, Sule (Committee member) / Ayyanar, Raja (Committee member) / Seo, Jae-Sun (Committee member) / Arizona State University (Publisher)
Created2017
Description
Hardware implementation of deep neural networks is earning significant importance nowadays. Deep neural networks are mathematical models that use learning algorithms inspired by the brain. Numerous deep learning algorithms such as multi-layer perceptrons (MLP) have demonstrated human-level recognition accuracy in image and speech classification tasks. Multiple layers of processing elements called neurons with several connections between them called synapses are used to build these networks. Hence, it involves operations that exhibit a high level of parallelism making it computationally and memory intensive. Constrained by computing resources and memory, most of the applications require a neural network which utilizes less energy. Energy efficient implementation of these computationally intense algorithms on neuromorphic hardware demands a lot of architectural optimizations. One of these optimizations would be the reduction in the network size using compression and several studies investigated compression by introducing element-wise or row-/column-/block-wise sparsity via pruning and regularization. Additionally, numerous recent works have concentrated on reducing the precision of activations and weights with some reducing to a single bit. However, combining various sparsity structures with binarized or very-low-precision (2-3 bit) neural networks have not been comprehensively explored. Output activations in these deep neural network algorithms are habitually non-binary making it difficult to exploit sparsity. On the other hand, biologically realistic models like spiking neural networks (SNN) closely mimic the operations in biological nervous systems and explore new avenues for brain-like cognitive computing. These networks deal with binary spikes, and they can exploit the input-dependent sparsity or redundancy to dynamically scale the amount of computation in turn leading to energy-efficient hardware implementation. This work discusses configurable spiking neuromorphic architecture that supports multiple hidden layers exploiting hardware reuse. It also presents design techniques for minimum-area/-energy DNN hardware with minimal degradation in accuracy. Area, performance and energy results of these DNN and SNN hardware is reported for the MNIST dataset. The Neuromorphic hardware designed for SNN algorithm in 28nm CMOS demonstrates high classification accuracy (>98% on MNIST) and low energy (51.4 - 773 (nJ) per classification). The optimized DNN hardware designed in 40nm CMOS that combines 8X structured compression and 3-bit weight precision showed 98.4% accuracy at 33 (nJ) per classification.
ContributorsKolala Venkataramanaiah, Shreyas (Author) / Seo, Jae-Sun (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Cao, Yu (Committee member) / Arizona State University (Publisher)
Created2018
Description
Improving energy efficiency has always been the prime objective of the custom and automated digital circuit design techniques. As a result, a multitude of methods to reduce power without sacrificing performance have been proposed. However, as the field of design automation has matured over the last few decades, there have been no new automated design techniques, that can provide considerable improvements in circuit power, leakage and area. Although emerging nano-devices are expected to replace the existing MOSFET devices, they are far from being as mature as semiconductor devices and their full potential and promises are many years away from being practical.
The research described in this dissertation consists of four main parts. First is a new circuit architecture of a differential threshold logic flipflop called PNAND. The PNAND gate is an edge-triggered multi-input sequential cell whose next state function is a threshold function of its inputs. Second a new approach, called hybridization, that replaces flipflops and parts of their logic cones with PNAND cells is described. The resulting \hybrid circuit, which consists of conventional logic cells and PNANDs, is shown to have significantly less power consumption, smaller area, less standby power and less power variation.
Third, a new architecture of a field programmable array, called field programmable threshold logic array (FPTLA), in which the standard lookup table (LUT) is replaced by a PNAND is described. The FPTLA is shown to have as much as 50% lower energy-delay product compared to conventional FPGA using well known FPGA modeling tool called VPR.
Fourth, a novel clock skewing technique that makes use of the completion detection feature of the differential mode flipflops is described. This clock skewing method improves the area and power of the ASIC circuits by increasing slack on timing paths. An additional advantage of this method is the elimination of hold time violation on given short paths.
Several circuit design methodologies such as retiming and asynchronous circuit design can use the proposed threshold logic gate effectively. Therefore, the use of threshold logic flipflops in conventional design methodologies opens new avenues of research towards more energy-efficient circuits.
The research described in this dissertation consists of four main parts. First is a new circuit architecture of a differential threshold logic flipflop called PNAND. The PNAND gate is an edge-triggered multi-input sequential cell whose next state function is a threshold function of its inputs. Second a new approach, called hybridization, that replaces flipflops and parts of their logic cones with PNAND cells is described. The resulting \hybrid circuit, which consists of conventional logic cells and PNANDs, is shown to have significantly less power consumption, smaller area, less standby power and less power variation.
Third, a new architecture of a field programmable array, called field programmable threshold logic array (FPTLA), in which the standard lookup table (LUT) is replaced by a PNAND is described. The FPTLA is shown to have as much as 50% lower energy-delay product compared to conventional FPGA using well known FPGA modeling tool called VPR.
Fourth, a novel clock skewing technique that makes use of the completion detection feature of the differential mode flipflops is described. This clock skewing method improves the area and power of the ASIC circuits by increasing slack on timing paths. An additional advantage of this method is the elimination of hold time violation on given short paths.
Several circuit design methodologies such as retiming and asynchronous circuit design can use the proposed threshold logic gate effectively. Therefore, the use of threshold logic flipflops in conventional design methodologies opens new avenues of research towards more energy-efficient circuits.
ContributorsKulkarni, Niranjan (Author) / Vrudhula, Sarma (Thesis advisor) / Colbourn, Charles (Committee member) / Seo, Jae-Sun (Committee member) / Yu, Shimeng (Committee member) / Arizona State University (Publisher)
Created2015
Description
Convolutional neural networks(CNNs) achieve high accuracy on large datasets but requires significant computation and storage requirement for training/testing. While many applications demand low latency and energy-efficient processing of the images, deploying these complex algorithms on the hardware is a challenging task. This dissertation first presents a compiler-based CNN training accelerator using DDR3 and HBM2 memory. An optimized RTL library is implemented to perform training-specific tasks and an RTL compiler is developed to generate FPGA-synthesizable RTL based on user-defined constraints. High Bandwidth Memory(HBM) provides efficient off-chip communication and improves the training performance. The impact of HBM2 on CNN training workloads is analyzed and compressively compared with DDR3. For training ResNet-20/VGG-like CNNs for the CIFAR-10 dataset, the proposed CNN training accelerator on Stratix-10 GX FPGA(DDR3) demonstrates 479 GOPS performance, and on Stratix-10 MX FPGA(HBM) shows 4.5/9.7 X energy-efficiency improvement compared to Tesla V100 GPU. Next, the FPGA online learning accelerator is presented. Adopting model segmentation techniques from Progressive Segmented Training(PST), the online learning accelerator achieved a 4.2X reduction in training latency. Furthermore, this dissertation presents an 8-bit floating-point (FP8) training processor which implements (1) Highly parallel tensor cores that maintain high PE utilization, (2) Hardware-efficient channel gating for dynamic output activation sparsity (3) Dynamic weight sparsity based on group Lasso (4) Gradient skipping based on FP prediction error. The 28nm prototype chip demonstrates significant improvements in FLOPs reduction (7.3×), energy efficiency (16.4 TFLOPS/W), and overall training latency speedup (4.7×) for both supervised training and self-supervised training tasks. In addition to the training accelerators, this dissertation also presents a CNN inference accelerator on ASIC(FixyNN) and FPGA(FixyFPGA). FixyNN consists of a fixed-weight feature extractor that generates ubiquitous CNN features and a conventional programmable CNN accelerator. In the fixed-weight feature extractor, the network weights are hard-coded into hardware and used as a fixed operand for the multiplication. Experimental results demonstrate FixyNN can achieve very high energy efficiencies up to 26.6 TOPS/W, and FixyFPGA achieves $2.34\times$ higher GOPS on ImageNet classification. In summary, this dissertation comprehensively discusses novel architectures of high-performance and energy-efficient ASIC/FPGA CNN inference/training accelerators.
ContributorsKolala Venkataramaniah, Shreyas (Author) / Seo, Jae-Sun (Thesis advisor) / Cao, Yu (Committee member) / Chakrabarti, Chaitali (Committee member) / Fan, Deliang (Committee member) / Arizona State University (Publisher)
Created2022
Description
While machine/deep learning algorithms have been successfully used in many practical applications including object detection and image/video classification, accurate, fast, and low-power hardware implementations of such algorithms are still a challenging task, especially for mobile systems such as Internet of Things, autonomous vehicles, and smart drones.
This work presents an energy-efficient programmable application-specific integrated circuit (ASIC) accelerator for object detection. The proposed ASIC supports multi-class (face/traffic sign/car license plate/pedestrian), many-object (up to 50) in one image with different sizes (6 down-/11 up-scaling), and high accuracy (87% for face detection datasets). The proposed accelerator is composed of an integral channel detector with 2,000 classifiers for five rigid boosted templates to make a strong object detection. By jointly optimizing the algorithm and efficient hardware architecture, the prototype chip implemented in 65nm demonstrates real-time object detection of 20-50 frames/s with 22.5-181.7mW (0.54-1.75nJ/pixel) at 0.58-1.1V supply.
In this work, to reduce computation without accuracy degradation, an energy-efficient deep convolutional neural network (DCNN) accelerator is proposed based on a novel conditional computing scheme and integrates convolution with subsequent max-pooling operations. This way, the total number of bit-wise convolutions could be reduced by ~2x, without affecting the output feature values. This work also has been developing an optimized dataflow that exploits sparsity, maximizes data re-use and minimizes off-chip memory access, which can improve upon existing hardware works. The total off-chip memory access can be saved by 2.12x. Preliminary results of the proposed DCNN accelerator achieved a peak 7.35 TOPS/W for VGG-16 by post-layout simulation results in 40nm.
A number of recent efforts have attempted to design custom inference engine based on various approaches, including the systolic architecture, near memory processing, and in-meomry computing concept. This work evaluates a comprehensive comparison of these various approaches in a unified framework. This work also presents the proposed energy-efficient in-memory computing accelerator for deep neural networks (DNNs) by integrating many instances of in-memory computing macros with an ensemble of peripheral digital circuits, which supports configurable multibit activations and large-scale DNNs seamlessly while substantially improving the chip-level energy-efficiency. Proposed accelerator is fully designed in 65nm, demonstrating ultralow energy consumption for DNNs.
This work presents an energy-efficient programmable application-specific integrated circuit (ASIC) accelerator for object detection. The proposed ASIC supports multi-class (face/traffic sign/car license plate/pedestrian), many-object (up to 50) in one image with different sizes (6 down-/11 up-scaling), and high accuracy (87% for face detection datasets). The proposed accelerator is composed of an integral channel detector with 2,000 classifiers for five rigid boosted templates to make a strong object detection. By jointly optimizing the algorithm and efficient hardware architecture, the prototype chip implemented in 65nm demonstrates real-time object detection of 20-50 frames/s with 22.5-181.7mW (0.54-1.75nJ/pixel) at 0.58-1.1V supply.
In this work, to reduce computation without accuracy degradation, an energy-efficient deep convolutional neural network (DCNN) accelerator is proposed based on a novel conditional computing scheme and integrates convolution with subsequent max-pooling operations. This way, the total number of bit-wise convolutions could be reduced by ~2x, without affecting the output feature values. This work also has been developing an optimized dataflow that exploits sparsity, maximizes data re-use and minimizes off-chip memory access, which can improve upon existing hardware works. The total off-chip memory access can be saved by 2.12x. Preliminary results of the proposed DCNN accelerator achieved a peak 7.35 TOPS/W for VGG-16 by post-layout simulation results in 40nm.
A number of recent efforts have attempted to design custom inference engine based on various approaches, including the systolic architecture, near memory processing, and in-meomry computing concept. This work evaluates a comprehensive comparison of these various approaches in a unified framework. This work also presents the proposed energy-efficient in-memory computing accelerator for deep neural networks (DNNs) by integrating many instances of in-memory computing macros with an ensemble of peripheral digital circuits, which supports configurable multibit activations and large-scale DNNs seamlessly while substantially improving the chip-level energy-efficiency. Proposed accelerator is fully designed in 65nm, demonstrating ultralow energy consumption for DNNs.
ContributorsKim, Minkyu (Author) / Seo, Jae-Sun (Thesis advisor) / Cao, Yu Kevin (Committee member) / Vrudhula, Sarma (Committee member) / Ogras, Umit Y. (Committee member) / Arizona State University (Publisher)
Created2019