Filtering by
- All Subjects: Metal Complexes
- All Subjects: SALE
- Creators: Seo, Don
efficient process for selective removal of alcohol from water than distillation. It is
necessary that the membranes have high alcohol permeabilities and selectivities.
Polydimethylsiloxane (PDMS) based mixed matrix membranes (MMMs) have
demonstrated very promising results. Zeolitic imidazolate framework-71 (ZIF-71)
demonstrated promising alcohol separation abilities. In this dissertation, we present
fundamental studies on the synthesis of ZIF-71/PDMS MMMs.
Free-standing ZIF-71/ PDMS membranes with 0, 5, 25 and 40 wt % ZIF-71
loadings were prepared and the pervaporation separation for ethanol and 1-butanol from
water was measured. ZIF-71/PDMS MMMs were formed through addition cure and
condensation cure methods. Addition cure method was not compatible with ZIF-71
resulting in membranes with poor mechanical properties, while the condensation cure
method resulted in membranes with good mechanical properties. The 40 wt % ZIF-71
loading PDMS nanocomposite membranes achieved a maximum ethanol/water selectivity
of 0.81 ± 0.04 selectivity and maximum 1-butnaol/water selectivity of 5.64 ± 0.15.
The effects of synthesis time, temperature, and reactant ratio on ZIF-71 particle
size and the effect of particle size on membrane performance were studied. Temperature
had the greatest effect on ZIF-71 particle size as the synthesis temperature varied from -
20 to 35 ºC. The ZIF-71 synthesized had particle diameters ranging from 150 nm to 1
μm. ZIF-71 particle size is critical in ZIF-71/PDMS composite membrane performance
for alcohol removal from water through pervaporation. The membranes made with
micron sized ZIF-71 particles showed higher alcohol/water selectivity than those with
smaller particles. Both alcohol and water permeability increased when larger sized ZIF-
71 particles were incorporated.
ZIF-71 particles were modified with four ligands through solvent assisted linker
exchange (SALE) method: benzimidazole (BIM), 5-methylbenzimidazole (MBIM), 5,6-
dimethylbenzimidazole (DMBIM) and 4-Phenylimidazole (PI). The morphology of ZIF-
71 were maintained after the modification. ZIF-71/PDMS composite membranes with 25
wt% loading modified ZIF-71 particles were made for alcohol/water separation. Better
particle dispersion in PDMS polymer matrix was observed with the ligand modified ZIFs.
For both ethanol/water and 1-butanol/water separations, the alcohol permeability and
alcohol/water selectivity were lowered after the ZIF-71 ligand exchange reaction.
MAX phases are ternary carbides or nitrides that possess unique material characteristics, often simplified as a mix of metallic and ceramic properties. Many aspects of MAX phases are still being researched, but they have exciting potential applications in high-temperature structural systems, the next generation of nuclear power plants, and concentrated solar power. This project aims to benefit further research into these applications by validating a rapid unconventional synthesis method: microwave-assisted sol-gel synthesis. Three MAX phases (Cr2GaC, Cr2GeC, and V2GeC) were successfully synthesized via this route, which should open the door for more rapid prototyping and ultimately more efficient research.
Amidinates and guanidinates are promising supporting ligands in organometallic and coordination chemistry, highly valued for their accessibility, tunability, and comparability with other popular anionic N-chelating hard donor ligands like β-diketiminates. By far the most powerful way to access these ligands involves direct metal-nucleophile insertion into N,N’- substituted carbodiimides. However, the majority of reported examples require the use of commercially accessible carbodiimide peptide coupling reagents with simple alkyl substituents leading to low variation in potential substituents. Presented here is the design, synthesis, and isolation of a novel N,N’-bis[3-(diphenylphosphino)propyl]carbodiimide via an Aza-Wittig reaction between two previously described air stable substrates. At room temperature, 3-(diphenylphosphanyl-borane)-propylisocyanate was added to N-(3-(diphenylphospino)propyl)-triphenylphosphinimine, leading to product formation in minutes. One-pot phosphine-borane deprotection, followed by simple filtration of the crude mixture through a small, basic silica plug using pentane and diethyl ether granted the corresponding carbodiimide in high purity and yield (over 70%), confirmed by 1H, 13C, and 31P NMR spectroscopy. In addition to accessing different central carbon substituents, modification of phosphine substituents should be easily accessible through minor variations in the synthesis. With these precursors, anionic amidinates and guanidinates capable of κ4 -N,N,P,P-coordination may be accessed. The ability of the labile phosphine arms to associate and dissociate may facilitate catalysis. Thus, this carbodiimide provides a tunable, reliable one step precursor to novel substituted amidinates and guanidinates for homogeneous transition metal catalysis.