The honors thesis presented in this document describes an extension to an electrical engineering capstone project whose scope is to develop the receiver electronics for an RF interrogator. The RF interrogator functions by detecting the change in resonant frequency of (i.e, frequency of maximum backscatter from) a target resulting from an environmental input. The general idea of this honors project was to design three frequency selective surfaces that would act as surrogate backscattering or reflecting targets that each contains a distinct frequency response. Using 3-D electromagnetic simulation software, three surrogate targets exhibiting bandpass frequency responses at distinct frequencies were designed and presented in this thesis.

My honors thesis took the form of a creative project. My final deliverables are my research presentation (pdf attachment) and solar powered electric scooter (image attachment). The goal of my project was to fix a second-hand electric scooter and create a solar-powered charger for its battery. The research portion of my creative project focused on exploring the circuit elements in a solar charging schematic and their relationships to power output. First, I explored methods of maximizing power output of the basic solar charging schematic. To find the maximum power output based on different settings of photocurrent (sunlight), I wrote a MATLAB code to calculate maximum power based on its derivative with respect to voltage set equal to zero. Finding this maximum power point in MATLAB allowed me to find its corresponding current and voltage output to produce that exact power. With these max current and voltage values, I was able to solve for an ideal resistor value to set in series with the solar panel in order to achieve these values. In doing so, I designed a maximum power point tracker (MPPT). This became an essential component in my charger’s final design. Next, I explored the microcircuit level of a solar panel schematic. In order to do so, I had to break my single diode model into several diodes in series, resulting in the overall solar panel voltage drop (aka the voltage rating of the solar panel) being divided N times. To find what this N value for a given solar panel is, I performed a lab experiment using a small solar panel and a floodlight to gather the panel’s turn on current and open circuit voltage. These two values helped me find the solar panel’s N value after linearizing the lab data. Now, with a much deeper understanding of solar charging circuitry, I was able to move forward with the design and implementation phase. The design and implementation portion of my creative project included the physical assembly of the solar-powered scooter. First, I analyzed the efficiency differences between having an AC coupled vs. DC coupled system. Due to the added complexity of AC conversions, I deemed it unnecessary to use an inverter in the charger. The charging schematic I designed only called for a charge controller and MPPT, both parts that could easily DC couple the system. Keeping the system in DC from solar panel to battery was definitely the most efficient method, so DC coupling was my final selection. Next, I calculated the required current and voltage output of my charger to meet the specs of the battery and the requirements I set for my project. Finally, I designed a solar array based on these ratings. The final design includes one 30 W panel in parallel with two series-connected 5W panels. The two series panels are affixed on the scooter neck for a built in charge design so that the scooter can be charged anywhere (outside while not in use). The big panel can be connected using a parallel branch in the charging cord that I spliced for added current if charging is set up in a stationary setting (by a window at home). The final design serves the need for sustainable micro mobility in a daily 50% depletion use case kept above 20% charged at all times.