Matching Items (8)
Filtering by
- All Subjects: Computer Engineering
- Genre: Masters Thesis
- Creators: Jayasuriya, Suren
- Member of: ASU Electronic Theses and Dissertations
- Member of: Theses and Dissertations
Description
Generating real-world content for VR is challenging in terms of capturing and processing at high resolution and high frame-rates. The content needs to represent a truly immersive experience, where the user can look around in 360-degree view and perceive the depth of the scene. The existing solutions only capture and offload the compute load to the server. But offloading large amounts of raw camera feeds takes longer latencies and poses difficulties for real-time applications. By capturing and computing on the edge, we can closely integrate the systems and optimize for low latency. However, moving the traditional stitching algorithms to battery constrained device needs at least three orders of magnitude reduction in power. We believe that close integration of capture and compute stages will lead to reduced overall system power.
We approach the problem by building a hardware prototype and characterize the end-to-end system bottlenecks of power and performance. The prototype has 6 IMX274 cameras and uses Nvidia Jetson TX2 development board for capture and computation. We found that capturing is bottlenecked by sensor power and data-rates across interfaces, whereas compute is limited by the total number of computations per frame. Our characterization shows that redundant capture and redundant computations lead to high power, huge memory footprint, and high latency. The existing systems lack hardware-software co-design aspects, leading to excessive data transfers across the interfaces and expensive computations within the individual subsystems. Finally, we propose mechanisms to optimize the system for low power and low latency. We emphasize the importance of co-design of different subsystems to reduce and reuse the data. For example, reusing the motion vectors of the ISP stage reduces the memory footprint of the stereo correspondence stage. Our estimates show that pipelining and parallelization on custom FPGA can achieve real time stitching.
We approach the problem by building a hardware prototype and characterize the end-to-end system bottlenecks of power and performance. The prototype has 6 IMX274 cameras and uses Nvidia Jetson TX2 development board for capture and computation. We found that capturing is bottlenecked by sensor power and data-rates across interfaces, whereas compute is limited by the total number of computations per frame. Our characterization shows that redundant capture and redundant computations lead to high power, huge memory footprint, and high latency. The existing systems lack hardware-software co-design aspects, leading to excessive data transfers across the interfaces and expensive computations within the individual subsystems. Finally, we propose mechanisms to optimize the system for low power and low latency. We emphasize the importance of co-design of different subsystems to reduce and reuse the data. For example, reusing the motion vectors of the ISP stage reduces the memory footprint of the stereo correspondence stage. Our estimates show that pipelining and parallelization on custom FPGA can achieve real time stitching.
ContributorsGunnam, Sridhar (Author) / LiKamWa, Robert (Thesis advisor) / Turaga, Pavan (Committee member) / Jayasuriya, Suren (Committee member) / Arizona State University (Publisher)
Created2018
Description
Computer vision is becoming an essential component of embedded system applications such as smartphones, wearables, autonomous systems and internet-of-things (IoT). These applications are generally deployed into environments with limited energy, memory bandwidth and computational resources. This trend is driving the development of energy-effi cient image processing solutions from sensing to computation. In this thesis, diff erent alternatives are explored to implement energy-efficient computer vision systems. First, I present a fi eld programmable gate array (FPGA) implementation of an adaptive subsampling algorithm for region-of-interest (ROI) -based object tracking. By implementing the computationally intensive sections of this algorithm on an FPGA, I aim to offl oad computing resources from energy-ineffi cient graphics processing units (GPUs) and/or general-purpose central processing units (CPUs). I also present a working system executing this algorithm in near real-time latency implemented on a standalone embedded device. Secondly, I present a neural network-based pipeline to improve the performance of event-based cameras in non-ideal optical conditions. Event-based cameras or dynamic vision sensors (DVS) are bio-inspired sensors that measure logarithmic per-pixel brightness changes in a scene. Their advantages include high dynamic range, low latency and ultra-low power when compared to standard frame-based cameras. Several tasks have been proposed to take advantage of these novel sensors but they rely on perfectly calibrated optical lenses that are in-focus. In this work I propose a methodto reconstruct events captured with an out-of-focus event-camera so they can be fed into an intensity reconstruction task. The network is trained with a dataset generated by simulating defocus blur in sequences from object tracking datasets such as LaSOT and OTB100. I also test the generalization performance of this network in scenes captured with a DAVIS event-based sensor equipped with an out-of-focus lens.
ContributorsTorres Muro, Victor Isaac (Author) / Jayasuriya, Suren (Thesis advisor) / Spanias, Andreas (Committee member) / Seo, Jae-Sun (Committee member) / Arizona State University (Publisher)
Created2022
Description
This thesis addresses the problem of recommending a viewpoint for aesthetic photography. Viewpoint recommendation is suggesting the best camera pose to capture a visually pleasing photograph of the subject of interest by using any end-user device such as drone, mobile robot or smartphone. Solving this problem enables to capture visually pleasing photographs autonomously in areal photography, wildlife photography, landscape photography or in personal photography.
The viewpoint recommendation problem can be divided into two stages: (a) generating a set of dense novel views based on the basis views captured about the subject. The dense novel views are useful to better understand the scene and to know how the subject looks from different viewpoints and (b) each novel is scored based on how aesthetically good it is. The viewpoint with the greatest aesthetic score is recommended for capturing a visually pleasing photograph.
The viewpoint recommendation problem can be divided into two stages: (a) generating a set of dense novel views based on the basis views captured about the subject. The dense novel views are useful to better understand the scene and to know how the subject looks from different viewpoints and (b) each novel is scored based on how aesthetically good it is. The viewpoint with the greatest aesthetic score is recommended for capturing a visually pleasing photograph.
ContributorsKatukuri, Sathish Kumar (Author) / LiKamWa, Robert (Thesis advisor) / Turaga, Pavan (Committee member) / Jayasuriya, Suren (Committee member) / Arizona State University (Publisher)
Created2019
Description
Cameras have become commonplace with wide-ranging applications of phone photography, computer vision, and medical imaging. With a growing need to reduce size and costs while maintaining image quality, the need to look past traditional style of cameras is becoming more apparent. Several non-traditional cameras have shown to be promising options for size-constraint applications, and while they may offer several advantages, they also usually are limited by image quality degradation due to optical or a need to reconstruct a captured image. In this thesis, we take a look at three of these non-traditional cameras: a pinhole camera, a diffusion-mask lensless camera, and an under-display camera (UDC).
For each of these cases, I present a feasible image restoration pipeline to correct for their particular limitations. For the pinhole camera, I present an early pipeline to allow for practical pinhole photography by reducing noise levels caused by low-light imaging, enhancing exposure levels, and sharpening the blur caused by the pinhole. For lensless cameras, we explore a neural network architecture that performs joint image reconstruction and point spread function (PSF) estimation to robustly recover images captured with multiple PSFs from different cameras. Using adversarial learning, this approach achieves improved reconstruction results that do not require explicit knowledge of the PSF at test-time and shows an added improvement in the reconstruction model’s ability to generalize to variations in the camera’s PSF. This allows lensless cameras to be utilized in a wider range of applications that require multiple cameras without the need to explicitly train a separate model for each new camera. For UDCs, we utilize a multi-stage approach to correct for low light transmission, blur, and haze. This pipeline uses a PyNET deep neural network architecture to perform a majority of the restoration, while additionally using a traditional optimization approach which is then fused in a learned manner in the second stage to improve high-frequency features. I show results from this novel fusion approach that is on-par with the state of the art.
For each of these cases, I present a feasible image restoration pipeline to correct for their particular limitations. For the pinhole camera, I present an early pipeline to allow for practical pinhole photography by reducing noise levels caused by low-light imaging, enhancing exposure levels, and sharpening the blur caused by the pinhole. For lensless cameras, we explore a neural network architecture that performs joint image reconstruction and point spread function (PSF) estimation to robustly recover images captured with multiple PSFs from different cameras. Using adversarial learning, this approach achieves improved reconstruction results that do not require explicit knowledge of the PSF at test-time and shows an added improvement in the reconstruction model’s ability to generalize to variations in the camera’s PSF. This allows lensless cameras to be utilized in a wider range of applications that require multiple cameras without the need to explicitly train a separate model for each new camera. For UDCs, we utilize a multi-stage approach to correct for low light transmission, blur, and haze. This pipeline uses a PyNET deep neural network architecture to perform a majority of the restoration, while additionally using a traditional optimization approach which is then fused in a learned manner in the second stage to improve high-frequency features. I show results from this novel fusion approach that is on-par with the state of the art.
ContributorsRego, Joshua D (Author) / Jayasuriya, Suren (Thesis advisor) / Blain Christen, Jennifer (Thesis advisor) / Turaga, Pavan (Committee member) / Arizona State University (Publisher)
Created2020
Description
The following document describes the hardware implementation and analysis of Temporal Interference Mitigation using High-Level Synthesis. As the problem of spectral congestion becomes more chronic and widespread, Electromagnetic radio frequency (RF) based systems are posing as viable solution to this problem. Among the existing RF methods Cooperation based systems have been a solution to a host of congestion problems. One of the most important elements of RF receiver is the spatially adaptive part of the receiver. Temporal Mitigation is vital technique employed at the receiver for signal recovery and future propagation along the radar chain.
The computationally intensive parts of temporal mitigation are identified and hardware accelerated. The hardware implementation is based on sequential approach with optimizations applied on the individual components for better performance.
An extensive analysis using a range of fixed point data types is performed to find the optimal data type necessary.
Finally a hybrid combination of data types for different components of temporal mitigation is proposed based on results from the above analysis.
The computationally intensive parts of temporal mitigation are identified and hardware accelerated. The hardware implementation is based on sequential approach with optimizations applied on the individual components for better performance.
An extensive analysis using a range of fixed point data types is performed to find the optimal data type necessary.
Finally a hybrid combination of data types for different components of temporal mitigation is proposed based on results from the above analysis.
ContributorsSiddiqui, Saquib Ahmad (Author) / Bliss, Daniel (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Ogras, Umit Y. (Committee member) / Jayasuriya, Suren (Committee member) / Arizona State University (Publisher)
Created2020
Description
Machine learning (ML) and deep learning (DL) has become an intrinsic part of multiple fields. The ability to solve complex problems makes machine learning a panacea. In the last few years, there has been an explosion of data generation, which has greatly improvised machine learning models. But this comes with a cost of high computation, which invariably increases power usage and cost of the hardware. In this thesis we explore applications of ML techniques, applied to two completely different fields - arts, media and theater and urban climate research using low-cost and low-powered edge devices. The multi-modal chatbot uses different machine learning techniques: natural language processing (NLP) and computer vision (CV) to understand inputs of the user and accordingly perform in the play and interact with the audience. This system is also equipped with other interactive hardware setups like movable LED systems, together they provide an experiential theatrical play tailored to each user. I will discuss how I used edge devices to achieve this AI system which has created a new genre in theatrical play. I will then discuss MaRTiny, which is an AI-based bio-meteorological system that calculates mean radiant temperature (MRT), which is an important parameter for urban climate research. It is also equipped with a vision system that performs different machine learning tasks like pedestrian and shade detection. The entire system costs around $200 which can potentially replace the existing setup worth $20,000. I will further discuss how I overcame the inaccuracies in MRT value caused by the system, using machine learning methods. These projects although belonging to two very different fields, are implemented using edge devices and use similar ML techniques. In this thesis I will detail out different techniques that are shared between these two projects and how they can be used in several other applications using edge devices.
ContributorsKulkarni, Karthik Kashinath (Author) / Jayasuriya, Suren (Thesis advisor) / Middel, Ariane (Thesis advisor) / Yu, Hongbin (Committee member) / Arizona State University (Publisher)
Created2021
Description
Realistic lighting is important to improve immersion and make mixed reality applications seem more plausible. To properly blend the AR objects in the real scene, it is important to study the lighting of the environment. The existing illuminationframeworks proposed by Google’s ARCore (Google’s Augmented Reality Software Development Kit) and Apple’s ARKit (Apple’s Augmented Reality Software Development Kit) are computationally expensive and have very slow refresh rates, which make them incompatible for dynamic environments and low-end mobile devices. Recently, there have been other illumination estimation frameworks such as GLEAM, Xihe, which aim at providing better illumination with faster refresh rates. GLEAM is an illumination estimation framework that understands the real scene by collecting pixel data from a reflecting spherical light probe. GLEAM uses this data to form environment cubemaps which are later mapped onto a reflection probe to generate illumination for AR objects.
It is noticed that from a single viewpoint only one half of the light probe can be observed at a time which does not give complete information about the environment. This leads to the idea of having a multi-viewpoint estimation for better performance. This thesis work analyzes the multi-viewpoint capabilities of AR illumination frameworks that use physical light probes to understand the environment. The current work builds networking using TCP and UDP protocols on GLEAM. This thesis work also documents how processor load sharing has been done while networking devices and how that benefits the performance of GLEAM on mobile devices. Some enhancements using multi-threading have also been made to the already existing GLEAM model to improve its performance.
ContributorsGurram, Sahithi (Author) / LiKamWa, Robert (Thesis advisor) / Jayasuriya, Suren (Committee member) / Turaga, Pavan (Committee member) / Arizona State University (Publisher)
Created2022
Description
It is not merely an aggregation of static entities that a video clip carries, but alsoa variety of interactions and relations among these entities. Challenges still remain
for a video captioning system to generate natural language descriptions focusing on
the prominent interest and aligning with the latent aspects beyond observations. This
work presents a Commonsense knowledge Anchored Video cAptioNing (dubbed as
CAVAN) approach. CAVAN exploits inferential commonsense knowledge to assist the
training of video captioning model with a novel paradigm for sentence-level semantic
alignment. Specifically, commonsense knowledge is queried to complement per training
caption by querying a generic knowledge atlas ATOMIC, and form the commonsense-
caption entailment corpus. A BERT based language entailment model trained from
this corpus then serves as a commonsense discriminator for the training of video
captioning model, and penalizes the model from generating semantically misaligned
captions. With extensive empirical evaluations on MSR-VTT, V2C and VATEX
datasets, CAVAN consistently improves the quality of generations and shows higher
keyword hit rate. Experimental results with ablations validate the effectiveness of
CAVAN and reveals that the use of commonsense knowledge contributes to the video
caption generation.
ContributorsShao, Huiliang (Author) / Yang, Yezhou (Thesis advisor) / Jayasuriya, Suren (Committee member) / Xiao, Chaowei (Committee member) / Arizona State University (Publisher)
Created2022