Matching Items (270)
Filtering by
- All Subjects: Business Administration
- Creators: Arizona State University
- Creators: Nagell, Ann
Description
Libby Larsen is one of the most performed and acclaimed composers today. She is a spirited, compelling, and sensitive composer whose music enhances the poetry of America's most prominent authors. Notable among her works are song cycles for soprano based on the poetry of female writers, among them novelist and poet Willa Cather (1873-1947). Larsen has produced two song cycles on works from Cather's substantial output of fiction: one based on Cather's short story, "Eric Hermannson's Soul," titled Margaret Songs: Three Songs from Willa Cather (1996); and later, My Antonia (2000), based on Cather's novel of the same title. In Margaret Songs, Cather's poetry and short stories--specifically the character of Margaret Elliot--combine with Larsen's unique compositional style to create a surprising collaboration. This study explores how Larsen in these songs delves into the emotional and psychological depths of Margaret's character, not fully formed by Cather. It is only through Larsen's music and Cather's poetry that Margaret's journey through self-discovery and love become fully realized. This song cycle is a glimpse through the eyes of two prominent female artists on the societal pressures placed upon Margaret's character, many of which still resonate with women in today's culture. This study examines the work Margaret Songs by discussing Willa Cather, her musical influences, and the conditions surrounding the writing of "Eric Hermannson's Soul." It looks also into Cather's influence on Libby Larsen and the commission leading to Margaret Songs. Finally, a description of the musical, dramatic, and textual content of the songs completes this interpretation of the interactions of Willa Cather, Libby Larsen, and the character of Margaret Elliot.
ContributorsMcLain, Christi Marie (Author) / FitzPatrick, Carole (Thesis advisor) / Dreyfoos, Dale (Committee member) / Holbrook, Amy (Committee member) / Ryan, Russell (Committee member) / Arizona State University (Publisher)
Created2013
Discovering Puerto Rican art song: a research project on four art song works by Héctor Campos Parsi
Description
Puerto Rico has produced many important composers who have contributed to the musical culture of the nation during the last 200 years. However, a considerable amount of their music has proven to be difficult to access and may contain numerous errors. This research project intends to contribute to the accessibility of such music and to encourage similar studies of Puerto Rican music. This study focuses on the music of Héctor Campos Parsi (1922-1998), one of the most prominent composers of the 20th century in Puerto Rico. After an overview of the historical background of music on the island and the biography of the composer, four works from his art song repertoire are given for detailed examination. A product of this study is the first corrected edition of his cycles Canciones de Cielo y Agua, Tres Poemas de Corretjer, Los Paréntesis, and the song Majestad Negra. These compositions date from 1947 to 1959, and reflect both the European and nationalistic writing styles of the composer during this time. Data for these corrections have been obtained from the composer's manuscripts, published and unpublished editions, and published recordings. The corrected scores are ready for publication and a compact disc of this repertoire, performed by soprano Melliangee Pérez and the author, has been recorded to bring to life these revisions. Despite the best intentions of the author, the various copyright issues have yet to be resolved. It is hoped that this document will provide the foundation for a resolution and that these important works will be available for public performance and study in the near future.
ContributorsRodríguez Morales, Luis F., 1980- (Author) / Campbell, Andrew (Thesis advisor) / Buck, Elizabeth (Committee member) / Holbrook, Amy (Committee member) / Kopta, Anne (Committee member) / Ryan, Russell (Committee member) / Arizona State University (Publisher)
Created2013
Description
The heat transfer enhancements available from expanding the cross-section of a boiling microchannel are explored analytically and experimentally. Evaluation of the literature on critical heat flux in flow boiling and associated pressure drop behavior is presented with predictive critical heat flux (CHF) and pressure drop correlations. An optimum channel configuration allowing maximum CHF while reducing pressure drop is sought. A perturbation of the channel diameter is employed to examine CHF and pressure drop relationships from the literature with the aim of identifying those adequately general and suitable for use in a scenario with an expanding channel. Several CHF criteria are identified which predict an optimizable channel expansion, though many do not. Pressure drop relationships admit improvement with expansion, and no optimum presents itself. The relevant physical phenomena surrounding flow boiling pressure drop are considered, and a balance of dimensionless numbers is presented that may be of qualitative use. The design, fabrication, inspection, and experimental evaluation of four copper microchannel arrays of different channel expansion rates with R-134a refrigerant is presented. Optimum rates of expansion which maximize the critical heat flux are considered at multiple flow rates, and experimental results are presented demonstrating optima. The effect of expansion on the boiling number is considered, and experiments demonstrate that expansion produces a notable increase in the boiling number in the region explored, though no optima are observed. Significant decrease in the pressure drop across the evaporator is observed with the expanding channels, and no optima appear. Discussion of the significance of this finding is presented, along with possible avenues for future work.
ContributorsMiner, Mark (Author) / Phelan, Patrick E (Thesis advisor) / Baer, Steven (Committee member) / Chamberlin, Ralph (Committee member) / Chen, Kangping (Committee member) / Herrmann, Marcus (Committee member) / Arizona State University (Publisher)
Created2013
Description
The flow of liquid PDMS (10:1 v/v base to cross-linker ratio) in open, rectangular silicon micro channels, with and without a hexa-methyl-di-silazane (HMDS) or poly-tetra-fluoro-ethylene (PTFE) (120 nm) coat, was studied. Photolithographic patterning and etching of silicon wafers was used to create micro channels with a range of widths (5-50 μm) and depths (5-20 μm). The experimental PDMS flow rates were compared to an analytical model based on the work of Lucas and Washburn. The experimental flow rates closely matched the predicted flow rates for channels with an aspect ratio (width to depth), p, between one and two. Flow rates in channels with p less than one were higher than predicted whereas the opposite was true for channels with p greater than two. The divergence between the experimental and predicted flow rates steadily increased with increasing p. These findings are rationalized in terms of the effect of channel dimensions on the front and top meniscus morphology and the possible deviation from the no-slip condition at the channel walls at high shear rates.
In addition, a preliminary experimental setup for calibration tests on ultrasensitive PDMS cantilever beams is reported. One loading and unloading cycle is completed on a microcantilever PDMS beam (theoretical stiffness 0.5 pN/ µm). Beam deflections are actuated by adjusting the buoyancy force on the beam, which is submerged in water, by the addition of heat. The expected loading and unloading curve is produced, albeit with significant noise. The experimental results indicate that the beam stiffness is a factor of six larger than predicted theoretically. One probable explanation is that the beam geometry may change when it is removed from the channel after curing, making assumptions about the beam geometry used in the theoretical analysis inaccurate. This theory is bolstered by experimental data discussed in the report. Other sources of error which could partially contribute to the divergent results are discussed. Improvements to the experimental setup for future work are suggested.
In addition, a preliminary experimental setup for calibration tests on ultrasensitive PDMS cantilever beams is reported. One loading and unloading cycle is completed on a microcantilever PDMS beam (theoretical stiffness 0.5 pN/ µm). Beam deflections are actuated by adjusting the buoyancy force on the beam, which is submerged in water, by the addition of heat. The expected loading and unloading curve is produced, albeit with significant noise. The experimental results indicate that the beam stiffness is a factor of six larger than predicted theoretically. One probable explanation is that the beam geometry may change when it is removed from the channel after curing, making assumptions about the beam geometry used in the theoretical analysis inaccurate. This theory is bolstered by experimental data discussed in the report. Other sources of error which could partially contribute to the divergent results are discussed. Improvements to the experimental setup for future work are suggested.
ContributorsSowers, Timothy Wayne (Author) / Rajagopalan, Jagannathan (Thesis advisor) / Herrmann, Marcus (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2014
Description
Recent literature indicates potential benefits in microchannel cooling if an inlet orifice is used to suppress pressure oscillations that develop under two-phase conditions. This study investigates the costs and benefits of using an adjustable microchannel inlet orifice. The focus is on orifice effect during steady-state boiling and critical heat flux (CHF) in the channels using R134a in a pumped refrigerant loop (PRL). To change orifice size, a dam controlled with a micrometer was placed in front of 31 parallel microchannels. Each channel had a hydraulic diameter of 0.235 mm and a length of 1.33 cm. For steady state two-phase conditions, mass fluxes of 300 kg m-2 s-1 and 600 kg m-2 s-1were investigated. For orifice sizes with a hydraulic diameter to unrestricted hydraulic diameter (Dh:Dh,ur) ratio less than 35 percent, oscillations were reduced and wall temperatures fell up to 1.5 °C. Critical heat flux data were obtained for 7 orifice sizes with mass fluxes from 186 kg m-2 s-1 to 847 kg m-2 s-1. For all mass fluxes and inlet conditions tested, CHF values for a Dh:Dh,ur ratio of 1.8 percent became increasingly lower (up to 37 W cm-2 less) than those obtained with larger orifices. An optimum orifice size with Dh:Dh,ur of 35 percent emerged, offering up to 5 W cm-2 increase in CHF over unrestricted conditions at the highest mass flux tested, 847 kg m-2 s-1. These improvements in cooling ability with inlet orifices in place under both steady-state and impending CHF conditions are modest, leading to the conclusion that inlet orifices are only mildly effective at improving heat transfer coefficients. Stability of the PRL used for experimentation was also studied and improved. A vapor compression cycle's (VCC) proportional, integral, and derivative controller was found to adversely affect stability within the PRL and cause premature CHF. Replacing the VCC with an ice water heat sink maintained steady pumped loop system pressures and mass flow rates. The ice water heat sink was shown to have energy cost savings over the use of a directly coupled VCC for removing heat from the PRL.
ContributorsOdom, Brent A (Author) / Phelan, Patrick E (Thesis advisor) / Herrmann, Marcus (Committee member) / Trimble, Steve (Committee member) / Tasooji, Amaneh (Committee member) / Holcomb, Don (Committee member) / Arizona State University (Publisher)
Created2012
Description
Microchannel heat sinks can possess heat transfer characteristics unavailable in conventional heat exchangers; such sinks offer compact solutions to otherwise intractable thermal management problems, notably in small-scale electronics cooling. Flow boiling in microchannels allows a very high heat transfer rate, but is bounded by the critical heat flux (CHF). This thesis presents a theoretical-numerical study of a method to improve the heat rejection capability of a microchannel heat sink via expansion of the channel cross-section along the flow direction. The thermodynamic quality of the refrigerant increases during flow boiling, decreasing the density of the bulk coolant as it flows. This may effect pressure fluctuations in the channels, leading to nonuniform heat transfer and local dryout in regions exceeding CHF. This undesirable phenomenon is counteracted by permitting the cross-section of the microchannel to increase along the direction of flow, allowing more volume for the vapor. Governing equations are derived from a control-volume analysis of a single heated rectangular microchannel; the cross-section is allowed to expand in width and height. The resulting differential equations are solved numerically for a variety of channel expansion profiles and numbers of channels. The refrigerant is R-134a and channel parameters are based on a physical test bed in a related experiment. Significant improvement in CHF is possible with moderate area expansion. Minimal additional manufacturing costs could yield major gains in the utility of microchannel heat sinks. An optimum expansion rate occurred in certain cases, and alterations in the channel width are, in general, more effective at improving CHF than alterations in the channel height. Modest expansion in height enables small width expansions to be very effective.
ContributorsMiner, Mark (Author) / Phelan, Patrick E (Thesis advisor) / Herrmann, Marcus (Committee member) / Chen, Kangping (Committee member) / Arizona State University (Publisher)
Created2011
Description
This dissertation offers three essays that investigate consumers’ health-related food choices and behaviors from three different, yet complementary, angles. The first essay uses an eye-tracking experiment to examine consumers’ visual attention to the Nutrition Facts Panels for healthy and unhealthy products. In this essay, I focus on how involvement and familiarity affect consumers’ attention toward the Nutrition Facts panel and how these two psychological factors interact with new label format changes in attracting consumers’ attention. In the second essay, I demonstrate using individual-level scanner data that nutritional attributes interact with marketing mix elements to affect consumers’ nutrition intake profiles and their intra-category substitution patterns. My findings suggest that marketing-mix sensitivities are correlated with consumers’ preferences for nutrient attributes in ways that depend on the “healthiness” of the nutrient. For instance, featuring promotes is positively correlated with “healthy” nutritional characteristics such as high-protein, low-fat, or low-carbohydrates, whereas promotion and display are positively correlated with preferences for “unhealthy” characteristics such as high-fat, or high-carbohydrates. I use model simulations to show that some marketing-mix elements are able to induce consumers to purchase items with higher maximum-content levels than others. The fourth chapter shows that dieters are not all the same. I develop and validate a new scale that measures lay theories about abstinence vs. moderation. My findings from a series of experiments indicate that dieters’ recovery from recalled vs. actual indulgences depend on whether they favor abstinence or moderation. However, compensatory coping strategies provide paths for people with both lay theories to recover after an indulgence, in their own ways. The three essays provide insights into individual differences that determine approaches of purchase behaviors, and consumption patterns, and life style that people choose, and these insights have potential policy implications to aid in designing the food-related interventions and policies to improve the healthiness of consumers’ consumption profiles and more general food well-being.
ContributorsXie, Yi (Author) / Richards, Timothy (Thesis advisor) / Mandel, Naomi (Committee member) / Grebitus, Carola (Committee member) / Arizona State University (Publisher)
Created2018
Description
This article can be divided into six parts.
The first chapter analyzes the background, theatrical and particle reasons of this research. The author argues that the management of law firm needs a set of good system. The first one is operating the law firm in scale, and the other on is corporate management model, which shall be constructed in detail in the paper and will be put into practice by the law firm in which the author is worked.
The second chapter will introduce modern management theory, combining the situation of management in our law firm to analyze, raising some reasonable suggestions and instructions to promote our law firm to achieve the corporate management.
In the third chapter, the first chapter, starting with the review of the development process of foreign and our law firms, listing the organizational forms and the characteristics of our law firm, analyzing the situation and the drawbacks of the law firm management.
The fourth and fifth chapter introduce he background, the connotation of the corporate management model, listing the development and successful experience of some typical cases in respect of corporate management.
In the last chapter, the construction of corporate management model will be introduced in terms of organization form, human resource management and informationizing development.
The corporate management model is not mature in china. Though it is not easy to reform the existing model, but it should be believed that the development benefiting the legal industry will be achieved.
The first chapter analyzes the background, theatrical and particle reasons of this research. The author argues that the management of law firm needs a set of good system. The first one is operating the law firm in scale, and the other on is corporate management model, which shall be constructed in detail in the paper and will be put into practice by the law firm in which the author is worked.
The second chapter will introduce modern management theory, combining the situation of management in our law firm to analyze, raising some reasonable suggestions and instructions to promote our law firm to achieve the corporate management.
In the third chapter, the first chapter, starting with the review of the development process of foreign and our law firms, listing the organizational forms and the characteristics of our law firm, analyzing the situation and the drawbacks of the law firm management.
The fourth and fifth chapter introduce he background, the connotation of the corporate management model, listing the development and successful experience of some typical cases in respect of corporate management.
In the last chapter, the construction of corporate management model will be introduced in terms of organization form, human resource management and informationizing development.
The corporate management model is not mature in china. Though it is not easy to reform the existing model, but it should be believed that the development benefiting the legal industry will be achieved.
ContributorsZhu, Ping (Author) / Gu, Bin (Thesis advisor) / Chang, Chun (Thesis advisor) / Zhu, Ning (Committee member) / Arizona State University (Publisher)
Created2017
Description
Due to the booming young mothers and fathers in the new era as well as the changes in the concept of parenting and the favorable liberalization of China's second child policy, the maternal-baby nursing market continues to grow, and it has become a must for businesses nowadays. In 2020, the size of the maternal-baby nursing market will reach 3.6 trillion. (Data: Yibang Power China's Maternal and Child Industry White Paper 2017).
The rapid development of mobile Internet, highly transparent information, consumers grasp the sovereignty, along with the rise of the middle class, consumption increase encouraged personalized, customized needs. The boundaries between online and offline are becoming increasingly blurred. Consumers are more inclined to choose multi-category with service channel providers. If the retailers still rely on good market resources, and the difference between the sales and purchase of commodities, they will face a huge challenge of the decrease in passenger flow and a decline in performance.
The paper takes the relationship between maternal-baby nursing retailers and targets customers as the study object, based on customer service of maternal-baby nursing retailer data, empirical studies, we found that this particular group, mothers and babies, especially value safety, quality, public praise and community review. If the retail enterprise attaches importance to establishing relationships with customers and enhances the relational viscosity through mutual trust, emotional formation and spread of public praise, it will help to increase the traffic volume and increase the output value of single customers.
The maternal-baby nursing retailers form a strong relationship between enterprises and customers by establishing a strong relationship between products and customers, employees and customers, and customers to customers. Maternal-baby nursing retailers operate single-customer value deeply, build a heavy membership system and manage customer assets, thereby enhancing their brand and performance.
The research on the method of establishing the strong tie can be considered as an analysis of feasibility. The research results of this paper will help to improve the overall customer service experience and satisfaction of the mother and infant retail industry, enhance the development of the whole industry and draw significance lessons from other service industries.
The rapid development of mobile Internet, highly transparent information, consumers grasp the sovereignty, along with the rise of the middle class, consumption increase encouraged personalized, customized needs. The boundaries between online and offline are becoming increasingly blurred. Consumers are more inclined to choose multi-category with service channel providers. If the retailers still rely on good market resources, and the difference between the sales and purchase of commodities, they will face a huge challenge of the decrease in passenger flow and a decline in performance.
The paper takes the relationship between maternal-baby nursing retailers and targets customers as the study object, based on customer service of maternal-baby nursing retailer data, empirical studies, we found that this particular group, mothers and babies, especially value safety, quality, public praise and community review. If the retail enterprise attaches importance to establishing relationships with customers and enhances the relational viscosity through mutual trust, emotional formation and spread of public praise, it will help to increase the traffic volume and increase the output value of single customers.
The maternal-baby nursing retailers form a strong relationship between enterprises and customers by establishing a strong relationship between products and customers, employees and customers, and customers to customers. Maternal-baby nursing retailers operate single-customer value deeply, build a heavy membership system and manage customer assets, thereby enhancing their brand and performance.
The research on the method of establishing the strong tie can be considered as an analysis of feasibility. The research results of this paper will help to improve the overall customer service experience and satisfaction of the mother and infant retail industry, enhance the development of the whole industry and draw significance lessons from other service industries.
ContributorsWang, Jianguo (Author) / Gu, Bin (Thesis advisor) / Chen, Hong (Thesis advisor) / Cui, Haitao (Committee member) / Arizona State University (Publisher)
Created2018
Description
This study examines the 3 key questions of media budget allocation, to find our a better invest model. Including spending share of traditional media and digital media, program selection strategy and duration mix optimization to analyse the trend of sample A (a global cosmetic brand) . Based on every test media campaign, we do research of media performance and sales volumn, add youth consumer behavior result, to develop a media investment ROI model for this brand. Create the evaluation system according to past big data and find the learnings of different length TVC usage. Of course all relavant findings and implications will be summarized after every section.
ContributorsXu, Jin (Author) / Gu, Bin (Thesis advisor) / Chen, Xinlei (Thesis advisor) / Shao, Benjamin (Committee member) / Arizona State University (Publisher)
Created2018