Matching Items (12)
Description
Over the past couple of decades, quality has been an area of increased focus. Multiple models and approaches have been proposed to measure the quality in the construction industry. This paper focuses on determining the quality of one of the types of roofing systems used in the construction industry, i.e. Sprayed Polyurethane Foam Roofs (SPF roofs). Thirty seven urethane coated SPF roofs that were installed in 2005 / 2006 were visually inspected to measure the percentage of blisters and repairs three times over a period of 4 year, 6 year and 7 year marks. A repairing criteria was established after a 6 year mark based on the data that were reported to contractors as vulnerable roofs. Furthermore, the relation between four possible contributing time of installation factors i.e. contractor, demographics, season, and difficulty (number of penetrations and size of the roof in square feet) that could affect the quality of the roof was determined. Demographics and difficulty did not affect the quality of the roofs whereas the contractor and the season when the roof was installed did affect the quality of the roofs.
ContributorsGajjar, Dhaval (Author) / Kashiwagi, Dean (Thesis advisor) / Sullivan, Kenneth (Committee member) / Badger, William (Committee member) / Arizona State University (Publisher)
Created2013
Description
This study sought to analyze the messages being conveyed through the discourse utilized in presenting the public face of The Arizona Early Childhood Development and Health Board, popularly known as First Things First (FTF) and to reveal how the different discourses and ideologies within FTF have been in the past and currently are "contending and struggling for dominance (Wodak, 2007)." FTF is located within the policy realm of Early Childhood Education and Care (ECEC). The people and the system have been very influential in guiding the course and policies set forth in Arizona since the citizen initiative, Proposition 203, passed in 2006, which allowed for the creation of the Early Childhood Development and Health Board. Lakoff's techniques for analyzing frames of discourse were utilized in conjunction with critical discourse analysis in order to tease out frames of reference, shifts in both discourse and frames, specific modes of messaging, and consistencies and inconsistencies within the public face presented by FTF.
ContributorsMiller, Lisa (Author) / Swadener, Elizabeth B (Thesis advisor) / Nakagawa, Kathy (Committee member) / Romero, Mary (Committee member) / Arizona State University (Publisher)
Created2013
Description
ABSTRACT This qualitative study examines how high school art teachers conceive of being a good art teacher. Motivated by my own experiences as an art teacher, I designed this study to add teachers' voices to the conversation surrounding quality in education. My research design included a narrative strand and an arts-based strand. In the narrative strand, I interviewed and observed 12 high school art educators from a major city in the southwest. I conducted an autoethnographic reflection exploring my connection to the research topic and research process. In the arts-based strand I used fiber-arts to further understand my topic. I wrote this dissertation using a narrative approach, blending the traditional research format, voices of participants, and my autoethnographic reflection. I included the results of my arts-based approach in the final chapter. Findings suggest that the teachers in this study conceptualize being a good art teacher as a process of identity construction. Each of the teachers understood what it meant to be a good art teacher in unique ways, connected to their personal experiences and backgrounds. As the teachers engaged in identity work to become the kind of art teacher they wanted to be, they engaged in a process of identity construction that consisted of four steps. I propose a model of identity construction in which the teachers chose teaching practices, evaluated those practices, identified challenges to their identities, and selected strategies to confirm, assert, or defend their desired identities. The findings have implications for teachers to become reflective practitioners; for teacher educators to prepare teachers to engage in reflective practices; and for administrators and policy makers to take into account the cyclical and personal nature of identity construction. This study also has implications for further research including the need to examine the dispositions of art teachers, teachers' evolving conceptions of what it means to be a good art teacher, and the effect labeling teachers' quality has on their identity construction.
ContributorsAndrelchik, Hillary (Author) / Erickson, Mary (Thesis advisor) / Young, Bernard (Committee member) / Margolis, Eric (Committee member) / Arizona State University (Publisher)
Created2014
Description
The ASU COVID-19 testing lab process was developed to operate as the primary testing site for all ASU staff, students, and specified external individuals. Tests are collected at various collection sites, including a walk-in site at the SDFC and various drive-up sites on campus; analysis is conducted on ASU campus and results are distributed virtually to all patients via the Health Services patient portal. The following is a literature review on past implementations of various process improvement techniques and how they can be applied to the ABCTL testing process to achieve laboratory goals. (abstract)
ContributorsKrell, Abby Elizabeth (Co-author) / Bruner, Ashley (Co-author) / Ramesh, Frankincense (Co-author) / Lewis, Gabriel (Co-author) / Barwey, Ishna (Co-author) / Myers, Jack (Co-author) / Hymer, William (Co-author) / Reagan, Sage (Co-author) / Compton, Carolyn (Thesis director) / McCarville, Daniel R. (Committee member) / Industrial, Systems & Operations Engineering Prgm (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description中医药是中华文明的瑰宝，中药材是中医药文化和产业的核心。随着近年来国家相关政策出台，中药材产业的发展备受瞩目。由于中药材产业链条长，层级多，各层级间信息不对称，因而中药材市场普遍具有“假”、“乱”、“杂”的问题。
A公司的中药材全产业链服务商模式，通过对上游各主要专营商的整合，形成一定的平台综合集采能力，并开始得到下游医药厂家、药店认可，在市场逐步形成品牌号召力。本文实证研究A公司商业模式的转型对中药材市场价格的影响，进而分析中药材全产业链服务商模式在中药材行业健康发展中所发挥的积极作用。研究结果表明，上下游产销结合的中药材全产业链服务商模式，只有在形成一定收购规模，对市场价格产生一定影响的时候，才能充分释放药材质量的信号，润滑药材交易市场，提高收购价格，增加市场波动率，发挥价格发现作用。由于中药材市场的信息不对称程度较高，如果产销结合模式仍处于初级开创阶段，产销结合模式释放的药材质量信号则不足以全面改善信息不对称的状况。
A公司的中药材全产业链服务商模式，通过对上游各主要专营商的整合，形成一定的平台综合集采能力，并开始得到下游医药厂家、药店认可，在市场逐步形成品牌号召力。本文实证研究A公司商业模式的转型对中药材市场价格的影响，进而分析中药材全产业链服务商模式在中药材行业健康发展中所发挥的积极作用。研究结果表明，上下游产销结合的中药材全产业链服务商模式，只有在形成一定收购规模，对市场价格产生一定影响的时候，才能充分释放药材质量的信号，润滑药材交易市场，提高收购价格，增加市场波动率，发挥价格发现作用。由于中药材市场的信息不对称程度较高，如果产销结合模式仍处于初级开创阶段，产销结合模式释放的药材质量信号则不足以全面改善信息不对称的状况。
ContributorsYin, Xiaowei (Author) / Shen, Wei (Thesis advisor) / Yan, Hong (Thesis advisor) / Gu, Bin (Committee member) / Arizona State University (Publisher)
Created2019
Description
High concentrations of carbon monoxide and particulate matter can cause respiratory disease, illness, and death in high doses. Air pollution is a concern in many urban areas of emerging markets that rely on outdated technologies for transportation and electricity generation; rural air quality is also a concern when noting the high prevalence of products of incomplete combustion resulting from open fires for cooking and heating. Monitoring air quality is an essential step to identifying these and other factors that affect air quality, and thereafter informing engineering and policy decisions to improve the quality of air. This study seeks to measure changes in air quality across spatial and temporal domains, with a specific focus on microclimates within an urban area. A prototype, low-cost air quality monitoring device has been developed to measure the concentrations of particulate matter, ozone, and carbon monoxide multiple times per minute. The device communicates data wirelessly via cell towers, and can run off-grid using a solar PV-battery system. The device can be replicated and deployed across urban regions for high-fidelity emissions monitoring to explore the effect of anthropogenic and environmental factors on intra-hour air quality. Hardware and software used in the device is described, and the wireless data communication protocols and capabilities are discussed.
ContributorsReilly, Kyle (Co-author) / Birner, Michael (Co-author) / Johnson, Nathan (Thesis director) / Gary, Kevin (Committee member) / Barrett, The Honors College (Contributor)
Created2015-05
Description
Unmanned aerial vehicles have received increased attention in the last decade due to their versatility, as well as the availability of inexpensive sensors (e.g. GPS, IMU) for their navigation and control. Multirotor vehicles, specifically quadrotors, have formed a fast growing field in robotics, with the range of applications spanning from surveil- lance and reconnaissance to agriculture and large area mapping. Although in most applications single quadrotors are used, there is an increasing interest in architectures controlling multiple quadrotors executing a collaborative task. This thesis introduces a new concept of control involving more than one quadrotors, according to which two quadrotors can be physically coupled in mid-flight. This concept equips the quadro- tors with new capabilities, e.g. increased payload or pursuit and capturing of other quadrotors. A comprehensive simulation of the approach is built to simulate coupled quadrotors. The dynamics and modeling of the coupled system is presented together with a discussion regarding the coupling mechanism, impact modeling and additional considerations that have been investigated. Simulation results are presented for cases of static coupling as well as enemy quadrotor pursuit and capture, together with an analysis of control methodology and gain tuning. Practical implementations are introduced as results show the feasibility of this design.
ContributorsLarsson, Daniel (Author) / Artemiadis, Panagiotis (Thesis advisor) / Marvi, Hamidreza (Committee member) / Berman, Spring (Committee member) / Arizona State University (Publisher)
Created2016
Description
The Rapid Eating and Activity Assessment for Participants Short Version (REAP-S), represents a method for rapid diet quality assessment, however, few studies have tested its validity. The Healthy Eating Index-2005 (HEI-2005) and the Diet Quality Index Revised (DQI-R) are tools that effectively assess diet quality, however, both are complex and time consuming. The objective of this study was to evaluate the validity of the REAP-S against the HEI-2005 and the DQI-R. Fifty males, 18 to 33 years of age, completed the REAP-S as well as a 24-hour diet recall. HEI-2005 and DQI-R scores were determined for each 24-hour recall. Scores from the REAP-S were evaluated against the HEI-2005 and DQI-R scores using Spearman rank order correlations and chi square. Modifications were also made to the original method of scoring the REAP-S to evaluate how the correlations transformed when certain questions were removed. The correlation coefficient for REAP-S and the HEI-2005 was 0.367 (P=0.009), and the correlation coefficient for REAP-S and the DQI-R was 0.323 (P=0.022). Chi square determined precision of the REAP-S to the HEI-2005 for overall diet quality at 64% and 62% for the DQI-R and REAP-S. Scores that were considered extreme (n=21) by the HEI-2005 (scores <40 and >60) had 76% precision with REAP-S. The correlation for the modified version of scoring REAP-S with the overall HEI-2005 and DQI-R were 0.395 (P=0.005) and 0.417 (P=0.003) respectively. Chi square statistics revealed the REAP-S accurately captured the diets of high quality versus low quality with 64% precision to the HEI-2005 and 62% of the DQI-R. When evaluating the modified REAP-S scores against the extreme HEI-2005 scores, precision increased to 81%. It appears the REAP-S is an acceptable tool to rapidly assess diet quality. It has a significant, moderate correlation to both the HEI-2005 and the DQI-R, with strong precision as well. Both correlation and precision is strengthened when values are compared to only the extreme scores of the HEI-2005; however, more research studies are needed to evaluate the validity of REAP-S in a more diverse population and to evaluate if changes to select questions can improve its accuracy in assessing diet quality.
ContributorsFawcett, Rachael (Author) / Johnston, Carol (Thesis advisor) / Mayol-Kreiser, Sandra (Committee member) / Wharton, Christopher (Christopher Mack), 1977- (Committee member) / Arizona State University (Publisher)
Created2012
Description
This study examined the quality of professional life at a Title I school that has achieved the Arizona Department of Education's highest accountability rating of Excelling for eight consecutive years. By examining the factors that influence the school environment including teachers' attitudes and the connections within the teacher community at this school, a description emerged of the factors that influenced the quality of professional lives of teachers. This descriptive study sought to describe, "What is the quality of professional life for teachers at a Title I elementary school with a history of high levels of student achievement?" The research was conducted at Seneca Elementary school (a pseudonym) in the Seneca School District (a pseudonym). By examining the quality of professional life for teachers in a highly ranked Title I school, a better understanding of the quality of professional life may lead to recommendations for other schools with high levels of poverty on how to support teachers who work in high poverty schools. Within a theoretical framework of motivation-hygiene theory and socio cultural theory, the study identified principal leadership as a primary supporting factor of quality of professional life. The study also identified lack of input and lack of teacher control over curriculum and instruction as barriers to quality of professional life. Teachers described principal leadership, environment, social factors and teacher identity as contributors to enhancing the quality of professional life. Trust and focus emerged as additional factors that improved the workplace for teachers.
ContributorsThomas, Jeffrey J (Author) / Danzig, Arnold (Thesis advisor) / Fischman, Gustavo (Committee member) / Boyle, Charlotte (Committee member) / Arizona State University (Publisher)
Created2011
Description
There has been a vast increase in applications of Unmanned Aerial Vehicles (UAVs) in civilian domains. To operate in the civilian airspace, a UAV must be able to sense and avoid both static and moving obstacles for flight safety. While indoor and low-altitude environments are mainly occupied by static obstacles, risks in space of higher altitude primarily come from moving obstacles such as other aircraft or flying vehicles in the airspace. Therefore, the ability to avoid moving obstacles becomes a necessity
for Unmanned Aerial Vehicles.
Towards enabling a UAV to autonomously sense and avoid moving obstacles, this thesis makes the following contributions. Initially, an image-based reactive motion planner is developed for a quadrotor to avoid a fast approaching obstacle. Furthermore, A Dubin’s curve based geometry method is developed as a global path planner for a fixed-wing UAV to avoid collisions with aircraft. The image-based method is unable to produce an optimal path and the geometry method uses a simplified UAV model. To compensate
these two disadvantages, a series of algorithms built upon the Closed-Loop Rapid Exploratory Random Tree are developed as global path planners to generate collision avoidance paths in real time. The algorithms are validated in Software-In-the-Loop (SITL) and Hardware-In-the-Loop (HIL) simulations using a fixed-wing UAV model and in real flight experiments using quadrotors. It is observed that the algorithm enables a UAV to avoid moving obstacles approaching to it with different directions and speeds.
for Unmanned Aerial Vehicles.
Towards enabling a UAV to autonomously sense and avoid moving obstacles, this thesis makes the following contributions. Initially, an image-based reactive motion planner is developed for a quadrotor to avoid a fast approaching obstacle. Furthermore, A Dubin’s curve based geometry method is developed as a global path planner for a fixed-wing UAV to avoid collisions with aircraft. The image-based method is unable to produce an optimal path and the geometry method uses a simplified UAV model. To compensate
these two disadvantages, a series of algorithms built upon the Closed-Loop Rapid Exploratory Random Tree are developed as global path planners to generate collision avoidance paths in real time. The algorithms are validated in Software-In-the-Loop (SITL) and Hardware-In-the-Loop (HIL) simulations using a fixed-wing UAV model and in real flight experiments using quadrotors. It is observed that the algorithm enables a UAV to avoid moving obstacles approaching to it with different directions and speeds.
ContributorsLin, Yucong (Author) / Saripalli, Srikanth (Thesis advisor) / Scowen, Paul (Committee member) / Fainekos, Georgios (Committee member) / Thangavelautham, Jekanthan (Committee member) / Youngbull, Cody (Committee member) / Arizona State University (Publisher)
Created2015