Matching Items (2)
Filtering by
- All Subjects: Soil-cement construction
- Creators: Jang, Jaewon
Description
A series of experiments were conducted to support validation of a numerical model for the performance of geomembrane liners subject to waste settlement and seismic loading. These experiments included large scale centrifuge model testing of a geomembrane-lined landfill, small scale laboratory testing to get the relevant properties of the materials used in the large scale centrifuge model, and tensile tests on seamed geomembrane coupons. The landfill model in the large scale centrifuge test was built with a cemented sand base, a thin film NafionTM geomembrane liner, and a mixture of sand and peat for model waste. The centrifuge model was spun up to 60 g, allowed to settle, and then subjected to seismic loading at three different peak ground accelerations (PGA). Strain on the liner and settlement of the waste during model spin-up and subsequent seismic loading and accelerations throughout the model due to seismic loading were acquired from sensors within the model. Laboratory testing conducted to evaluate the properties of the materials used in the model included triaxial compression tests on the cemented sand base, wide-width tensile testing of the thin film geomembrane, interface shear testing between the thin film geomembrane and the waste material, and one dimensional compression and cyclic direct simple shear testing of the sand-peat mixture used to simulate the waste. The tensile tests on seamed high-density polyethylene (HDPE) coupons were conducted to evaluate strain concentration associated with seams oriented perpendicular to an applied tensile load. Digital image correlation (DIC) was employed to evaluate the strain field, and hence seam strain concentrations, in these tensile tests. One-dimensional compression tests were also conducted on composite sand and HDPE samples to evaluate the compressive modulus of HDPE. The large scale centrifuge model and small scale laboratory tests provide the necessary data for numerical model validation. The tensile tests on seamed HDPE specimens show that maximum tensile strain due to strain concentrations at a seam is greater than previously suggested, a finding with profound implications for landfill liner design and construction quality control/quality assurance (QC/QA) practices. The results of the one-dimensional compression tests on composite sand-HDPE specimens were inconclusive.
ContributorsGutierrez, Angel (Author) / Kavazanjian, Edward (Thesis advisor) / Zapata, Claudia (Committee member) / Jang, Jaewon (Committee member) / Arizona State University (Publisher)
Created2016
Description
Concern and interest about the environment and ecologic systems have promoted the usage of earth as a construction material. Technology advancement has resulted in the evolution of adobe into compressed stabilized earth blocks (CSEB). CSEB’s are prepared by compressing the soil-stabilizer mixture at a particular stress. In order to accomplish the required strength, cement has been used in a regular basis as stabilizing agent. It is of interest to find means to reduce the cement used in their construction without affecting its dry strength and durability. In this study, natural fibers were used along with lower proportions of cement to stabilize soil with varying fine content. Blocks were compacted at 10MPa stress and prepared by using 7%, 5% and 3% cement along with fiber content ranging from 0.25% to 2%. The effect of fine content, cement and fibers on strength and durability of the CSEB blocks were studied. Different sand/fine fractions of a native Arizona soil were used to fabricate the blocks. Results indicate that the compressive strength reaches a maximum value for blocks with 30% fine content and inclusion of fibers up to 0.5% increased the dry compressive strength. The use of 0.25% fiber by weight and 5% cement content showed comparable dry compressive strength to that of the 7% cement blocks with no fibers. The dry strength of the blocks reached an optimal condition when the combination of materials was 30% fines, 5% cement and 0.5% fibers, which satisfied the strength requirement given by the ASTM C62 and ASTM C216 standards for construction material. The CSEB’s with 0.5% fiber had higher toughness. The durability was determined by subjecting the CSEBs to wetting and drying cycles. The blocks with 5% cement withstand the durability test as the dry strength was higher than that required for construction use.
The blocks were also submitted to heating and cooling cycles. After 12 cycles, the specimens showed a reduction in strength, which further increased as the number of cycles increased. Finally, the thermal resistivity of fiber reinforced CSEB was found to be higher than that for clay bricks.
The blocks were also submitted to heating and cooling cycles. After 12 cycles, the specimens showed a reduction in strength, which further increased as the number of cycles increased. Finally, the thermal resistivity of fiber reinforced CSEB was found to be higher than that for clay bricks.
ContributorsPadmini Chikke Gowda, Rakshith (Author) / Zapata, Claudia (Thesis advisor) / Kavazanjian, Edward (Committee member) / Jang, Jaewon (Committee member) / Arizona State University (Publisher)
Created2016