Matching Items (4)
Filtering by
- All Subjects: Aluminum alloys--Corrosion.
- Creators: Solanki, Kiran
- Creators: Reed, Kaye
- Creators: Votroubek, Edward Daniel
- Status: Published
Description
Al 7075 alloys are used in a variety of structural applications, such as aircraft wings, automotive components, fuselage, spacecraft, missiles, etc. The mechanical and corrosion behavior of these alloys are dependent on their microstructure and the environment. Therefore, a comprehensive study on microstructural characterization and stress-environment interaction is necessary. Traditionally, 2D techniques have been used to characterize microstructure, which are inaccurate and inadequate since the research has shown that the results obtained in the bulk are different from those obtained on the surface. There now exist several techniques in 3D, which can be used to characterize the microstructure. Al 7075 alloys contain second phase particles which can be classified as Fe-bearing inclusions, Si-bearing inclusions and precipitates. The variation in mechanical and corrosion properties of aluminum alloys has been attributed to the size, shape, distribution, corrosion properties and mechanical behavior of these precipitates and constituent particles. Therefore, in order to understand the performance of Al 7075 alloys, it is critical to investigate the size and distribution of inclusions and precipitates in the alloys along with their mechanical properties, such as Young's modulus, hardness and stress-strain behavior. X-ray tomography and FIB tomography were used to visualize and quantify the microstructure of constituent particles (inclusions) and precipitates, respectively. Microscale mechanical characterization techniques, such as nanoindentation and micropillar compression, were used to obtain mechanical properties of inclusions. Over the years, studies have used surface measurements to understand corrosion behavior of materials. More recently, in situ mechanical testing has become more attractive and advantageous, as it enables visualization and quantification of microstructural changes as a function of time (4D). In this study, in situ X-ray synchrotron tomography was used to study the SCC behavior of Al 7075 alloys in moisture and deionized water. Furthermore, experiments were performed in EXCO solution to study the effect of applied stress on exfoliation behavior in 3D. Contrary to 2D measurements made at the surface which suggest non-uniform crack growth rates, three dimensional measurements of the crack length led to a much more accurate measurement of crack growth rates.
ContributorsSingh, Sudhanshu Shekhar (Author) / Chawla, Nikhilesh (Thesis advisor) / Alford, Terry (Committee member) / Solanki, Kiran (Committee member) / Oswald, Jay (Committee member) / Arizona State University (Publisher)
Created2015
Description
Craniofacial morphology in primates can vary on the basis of their diet because foods are often disparate in the amount and duration of force required to break them down. Therefore diet has the potential to exercise considerable selective pressure on the morphology of the masticatory system. The zygomatic arch is a known site of relatively high masticatory strain and yet the relationship between arch form and load type is relatively unknown in primates. While the relative position and robusticity of the arch is considered a key indicator of craniofacial adaptations to a mechanically challenging diet, and central to efforts to infer diet in past species, the relationships between morphology and diet type in this feature are not well established.
This study tested hypotheses using two diet categorizations: total consumption percent and food material properties (FMPs). The first hypothesis that cortical bone area (CA) and section moduli (bone strength) are positively correlated with masticatory loading tests whether CA and moduli measures were greatest anteriorly and decreased posteriorly along the arch. The results found these measures adhered to this predicted pattern in the majority of taxa. The second hypothesis examines sutural complexity in the zygomaticotemporal suture as a function of dietary loading differences by calculating fractal dimensions as indices of complexity. No predictable pattern was found linking sutural complexity and diet in this primate sample, though hard object consumers possessed the most complex sutures. Lastly, cross-sectional geometric properties were measured to investigate whether bending and torsional resistance and cross-sectional shape are related to differences in masticatory loading. The highest measures of mechanical resistance tracked with areas of greatest strain in the majority of taxa. Cross-sectional shape differences do appear to reflect dietary differences. FMPs were not correlated with cross-sectional variables, however pairwise comparisons suggest taxa that ingest foods of greater stiffness experience relatively larger measures of bending and torsional resistance. The current study reveals that internal and external morphological factors vary across the arch and in conjunction with diet in primates. These findings underscore the importance of incorporating these mechanical differences in models of zygomatic arch mechanical behavior and primate craniofacial biomechanics.
This study tested hypotheses using two diet categorizations: total consumption percent and food material properties (FMPs). The first hypothesis that cortical bone area (CA) and section moduli (bone strength) are positively correlated with masticatory loading tests whether CA and moduli measures were greatest anteriorly and decreased posteriorly along the arch. The results found these measures adhered to this predicted pattern in the majority of taxa. The second hypothesis examines sutural complexity in the zygomaticotemporal suture as a function of dietary loading differences by calculating fractal dimensions as indices of complexity. No predictable pattern was found linking sutural complexity and diet in this primate sample, though hard object consumers possessed the most complex sutures. Lastly, cross-sectional geometric properties were measured to investigate whether bending and torsional resistance and cross-sectional shape are related to differences in masticatory loading. The highest measures of mechanical resistance tracked with areas of greatest strain in the majority of taxa. Cross-sectional shape differences do appear to reflect dietary differences. FMPs were not correlated with cross-sectional variables, however pairwise comparisons suggest taxa that ingest foods of greater stiffness experience relatively larger measures of bending and torsional resistance. The current study reveals that internal and external morphological factors vary across the arch and in conjunction with diet in primates. These findings underscore the importance of incorporating these mechanical differences in models of zygomatic arch mechanical behavior and primate craniofacial biomechanics.
ContributorsEdmonds, Hallie Margaret (Author) / Reed, Kaye (Thesis advisor) / Schwartz, Gary (Committee member) / Vinyard, Chris (Committee member) / Arizona State University (Publisher)
Created2017
Description
Sn and Al alloys are widely used in various industries. Environmental-induced damage resulting in whiskering in Sn and corrosion in Al account for numerous failures globally every year. Therefore, for designing materials that can better withstand these failures, a comprehensive study on the characterization of the damage is necessary. This research implements advanced characterization techniques to study the above-mentioned environmental-induced damage in Sn and Al alloys.
Tin based films are known to be susceptible to whisker growth resulting in numerous failures. While the mechanisms and factors affecting whisker growth have been studied extensively, not much has been reported on the mechanical properties of tin whiskers themselves. This study focuses on the tensile behavior of tin whiskers. Tensile tests of whiskers were conducted in situ a dual beam focused ion beam (FIB) with a scanning electron microscope (SEM) using a micro electro-mechanical system (MEMS) tensile testing stage. The deformation mechanisms of whiskers were analyzed using transmission electron microscopy (TEM).
Due to the heterogenous nature of the microstructure of Al 7075, it is susceptible to corrosion forming corrosion products and pits. These can be sites for cracks nucleation and propagation resulting in stress corrosion cracking (SCC). Therefore, complete understanding of the corrosion damaged region and its effect on the strength of the alloy is necessary. Several studies have been performed to visualize pits and understand their effect on the mechanical performance of Al alloys using two-dimensional (2D) approaches which are often inadequate. To get a thorough understanding of the pits, it is necessary for three-dimensional (3D) studies. In this study, Al 7075 alloys were corroded in 3.5 wt.% NaCl solution and X-ray tomography was used to obtain the 3D microstructure of pits enabling the quantification of their dimensions accurately. Furthermore, microstructure and mechanical property correlations helped in a better understanding of the effect of corrosion. Apart from the pits, a surface corrosion layer also forms on Al. A subsurface damage layer has also been identified that forms due to the aggressive nature of NaCl. Energy dispersive X-ray spectroscopy (EDX) and nanoindentation helped in identifying this region and understanding the variation in properties.
Tin based films are known to be susceptible to whisker growth resulting in numerous failures. While the mechanisms and factors affecting whisker growth have been studied extensively, not much has been reported on the mechanical properties of tin whiskers themselves. This study focuses on the tensile behavior of tin whiskers. Tensile tests of whiskers were conducted in situ a dual beam focused ion beam (FIB) with a scanning electron microscope (SEM) using a micro electro-mechanical system (MEMS) tensile testing stage. The deformation mechanisms of whiskers were analyzed using transmission electron microscopy (TEM).
Due to the heterogenous nature of the microstructure of Al 7075, it is susceptible to corrosion forming corrosion products and pits. These can be sites for cracks nucleation and propagation resulting in stress corrosion cracking (SCC). Therefore, complete understanding of the corrosion damaged region and its effect on the strength of the alloy is necessary. Several studies have been performed to visualize pits and understand their effect on the mechanical performance of Al alloys using two-dimensional (2D) approaches which are often inadequate. To get a thorough understanding of the pits, it is necessary for three-dimensional (3D) studies. In this study, Al 7075 alloys were corroded in 3.5 wt.% NaCl solution and X-ray tomography was used to obtain the 3D microstructure of pits enabling the quantification of their dimensions accurately. Furthermore, microstructure and mechanical property correlations helped in a better understanding of the effect of corrosion. Apart from the pits, a surface corrosion layer also forms on Al. A subsurface damage layer has also been identified that forms due to the aggressive nature of NaCl. Energy dispersive X-ray spectroscopy (EDX) and nanoindentation helped in identifying this region and understanding the variation in properties.
ContributorsVallabhaneni, Venkata Sathya Sai Renuka (Author) / Chawla, Nikhilesh (Thesis advisor) / Rajagopalan, Jagannathan (Committee member) / Solanki, Kiran (Committee member) / Arizona State University (Publisher)
Created2017
Description
In real world applications, materials undergo a simultaneous combination of tension, compression, and torsion as a result of high velocity impact. The split Hopkinson pressure bar (SHPB) is an effective tool for analyzing stress-strain response of materials at high strain rates but currently little can be done to produce a synchronized combination of these varying impacts. This research focuses on fabricating a flange which will be mounted on the incident bar of a SHPB and struck perpendicularly by a pneumatically driven striker thus allowing for torsion without interfering with the simultaneous compression or tension. Analytical calculations are done to determine size specifications of the flange to protect against yielding or failure. Based on these results and other design considerations, the flange and a complementary incident bar are created. Timing can then be established such that the waves impact the specimen at the same time causing simultaneous loading of a specimen. This thesis allows research at Arizona State University to individually incorporate all uniaxial deformation modes (tension, compression, and torsion) at high strain rates as well as combining either of the first two modes with torsion. Introduction of torsion will expand the testing capabilities of the SHPB at ASU and allow for more in depth analysis of the mechanical behavior of materials under impact loading. Combining torsion with tension or compression will promote analysis of a material's adherence to the Von Mises failure criterion. This greater understanding of material behavior can be implemented into models and simulations thereby improving the accuracy with which engineers can design new structures.
ContributorsVotroubek, Edward Daniel (Author) / Solanki, Kiran (Thesis director) / Oswald, Jay (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05