Filtering by
- All Subjects: hardware accelerator
- Creators: Chakrabarti, Chaitali
- Creators: Ogras, Umit Y.
- Creators: Grewal, Anoop
As a result of the increase of pollution related to industrialization in Vietnam, acid rain has become a prevalent issue for Vietnamese farmers who are forced to rinse their crops – risking damage due to overwatering and poor harvest. Thus, the team was motivated to develop a solution to harmful impacts of acidic rainwater by creating a system with the ability to capture rainwater and determine its level of acidity in order to optimize the crop watering process, and promote productive crops. By conducting preliminary research on rainfall and tropical climate in Vietnam, existing products on the market, and pH sensors for monitoring and device material, the team was able to design a number of devices to collect, store, and measure the pH of rainwater. After developing a number of initial design requirements based on the needs of the farmers, a final prototype was developed using the best aspects of each initial design. Tests were conducted with varying structural and aqueous materials to represent a broad range of environmental conditions. While the scope of the project was ultimately limited to prototyping purposes, the principles explored throughout this thesis project can successfully be applied to a fully-functioning production model available for commercial use on Vietnamese farms. Given more time for development, improvements would be made in the extent of materials tested, and the configuration of electronics and data acquisition, in order to further optimize the process of determining rainwater acidity.
As a result of the increase of pollution related to industrialization in Vietnam, acid rain has become a prevalent issue for Vietnamese farmers who are forced to rinse their crops – risking damage due to overwatering and poor harvest. Thus, the team was motivated to develop a solution to harmful impacts of acidic rainwater by creating a system with the ability to capture rainwater and determine its level of acidity in order to optimize the crop watering process, and promote productive crops. By conducting preliminary research on rainfall and tropical climate in Vietnam, existing products on the market, and pH sensors for monitoring and device material, the team was able to design a number of devices to collect, store, and measure the pH of rainwater. After developing a number of initial design requirements based on the needs of the farmers, a final prototype was developed using the best aspects of each initial design. Tests were conducted with varying structural and aqueous materials to represent a broad range of environmental conditions. While the scope of the project was ultimately limited to prototyping purposes, the principles explored throughout this thesis project can successfully be applied to a fully-functioning production model available for commercial use on Vietnamese farms. Given more time for development, improvements would be made in the extent of materials tested, and the configuration of electronics and data acquisition, in order to further optimize the process of determining rainwater acidity.
How Does Technology Development Influence the Assessment of Parkinson’s Disease? A Systematic Review
This review focuses on the use of modern equipment for PD applications that were developed in the last decade. Four significant fields of research were identified: Assistance diagnosis, Prognosis or Monitoring of Symptoms and their Severity, Predicting Response to Treatment, and Assistance to Therapy or Rehabilitation. This study reviews the papers published between January 2008 and December 2018 in the following four databases: Pubmed Central, Science Direct, IEEE Xplore and MDPI. After removing unrelated articles, ones published in languages other than English, duplicate entries and other articles that did not fulfill the selection criteria, 778 papers were manually investigated and included in this review. A general overview of PD applications, devices used and aspects monitored for PD management is provided in this systematic review.
In this dissertation, algorithm-architecture co-design techniques that aim to make hand-held 3-D ultrasound a reality are presented. First, image enhancement methods to improve signal-to-noise ratio (SNR) are proposed. These include virtual source firing techniques and a low overhead digital front-end architecture using orthogonal chirps and orthogonal Golay codes.
Second, algorithm-architecture co-design techniques to reduce the power consumption of 3-D SAU imaging systems is presented. These include (i) a subaperture multiplexing strategy and the corresponding apodization method to alleviate the signal bandwidth bottleneck, and (ii) a highly efficient iterative delay calculation method to eliminate complex operations such as multiplications, divisions and square-root in delay calculation during beamforming. These techniques were used to define Sonic Millip3De, a 3-D die stacked architecture for digital beamforming in SAU systems. Sonic Millip3De produces 3-D high resolution images at 2 frames per second with system power consumption of 15W in 45nm technology.
Third, a new beamforming method based on separable delay decomposition is proposed to reduce the computational complexity of the beamforming unit in an SAU system. The method is based on minimizing the root-mean-square error (RMSE) due to delay decomposition. It reduces the beamforming complexity of a SAU system by 19x while providing high image fidelity that is comparable to non-separable beamforming. The resulting modified Sonic Millip3De architecture supports a frame rate of 32 volumes per second while maintaining power consumption of 15W in 45nm technology.
Next a 3-D plane-wave imaging system that utilizes both separable beamforming and coherent compounding is presented. The resulting system has computational complexity comparable to that of a non-separable non-compounding baseline system while significantly improving contrast-to-noise ratio and SNR. The modified Sonic Millip3De architecture is now capable of generating high resolution images at 1000 volumes per second with 9-fire-angle compounding.
This work presents an energy-efficient programmable application-specific integrated circuit (ASIC) accelerator for object detection. The proposed ASIC supports multi-class (face/traffic sign/car license plate/pedestrian), many-object (up to 50) in one image with different sizes (6 down-/11 up-scaling), and high accuracy (87% for face detection datasets). The proposed accelerator is composed of an integral channel detector with 2,000 classifiers for five rigid boosted templates to make a strong object detection. By jointly optimizing the algorithm and efficient hardware architecture, the prototype chip implemented in 65nm demonstrates real-time object detection of 20-50 frames/s with 22.5-181.7mW (0.54-1.75nJ/pixel) at 0.58-1.1V supply.
In this work, to reduce computation without accuracy degradation, an energy-efficient deep convolutional neural network (DCNN) accelerator is proposed based on a novel conditional computing scheme and integrates convolution with subsequent max-pooling operations. This way, the total number of bit-wise convolutions could be reduced by ~2x, without affecting the output feature values. This work also has been developing an optimized dataflow that exploits sparsity, maximizes data re-use and minimizes off-chip memory access, which can improve upon existing hardware works. The total off-chip memory access can be saved by 2.12x. Preliminary results of the proposed DCNN accelerator achieved a peak 7.35 TOPS/W for VGG-16 by post-layout simulation results in 40nm.
A number of recent efforts have attempted to design custom inference engine based on various approaches, including the systolic architecture, near memory processing, and in-meomry computing concept. This work evaluates a comprehensive comparison of these various approaches in a unified framework. This work also presents the proposed energy-efficient in-memory computing accelerator for deep neural networks (DNNs) by integrating many instances of in-memory computing macros with an ensemble of peripheral digital circuits, which supports configurable multibit activations and large-scale DNNs seamlessly while substantially improving the chip-level energy-efficiency. Proposed accelerator is fully designed in 65nm, demonstrating ultralow energy consumption for DNNs.
on-square matrix. It has a wide range
of applications especially in Multiple Input-Multiple Output (MIMO) communication
systems. Unfortunately it has high computation complexity { for matrix size of nxn,
QRD has O(n3) complexity and back substitution, which is used to solve a system
of linear equations, has O(n2) complexity. Thus, as the matrix size increases, the
hardware resource requirement for QRD and back substitution increases signicantly.
This thesis presents the design and implementation of a
exible QRD and back substitution accelerator using a folded architecture. It can support matrix sizes of
4x4, 8x8, 12x12, 16x16, and 20x20 with low hardware resource requirement.
The proposed architecture is based on the systolic array implementation of the
Givens algorithm for QRD. It is built with three dierent types of computation blocks
which are connected in a 2-D array structure. These blocks are controlled by a
scheduler which facilitates reusability of the blocks to perform computation for any
input matrix size which is a multiple of 4. These blocks are designed using two
basic programming elements which support both the forward and backward paths to
compute matrix R in QRD and column-matrix X in back substitution computation.
The proposed architecture has been mapped to Xilinx Zynq Ultrascale+ FPGA
(Field Programmable Gate Array), ZCU102. All inputs are complex with precision
of 40 bits (38 fractional bits and 1 signed bit). The architecture can be clocked at
50 MHz. The synthesis results of the folded architecture for dierent matrix sizes
are presented. The results show that the folded architecture can support QRD and
back substitution for inputs of large sizes which otherwise cannot t on an FPGA
when implemented using a
at architecture. The memory sizes required for dierent
matrix sizes are also presented.