Matching Items (17)
Filtering by
- Creators: Young, Patrick
- Creators: Shkolnik, Evgenya
- All Subjects: Astronomy
Description
A significant portion of stars occur as binary systems, in which two stellar components orbit a common center of mass. As the number of known exoplanet systems continues to grow, some binary systems are now known to harbor planets around one or both stellar components. As a first look into composition of these planetary systems, I investigate the chemical compositions of 4 binary star systems, each of which is known to contain at least one planet. Stars are known to vary significantly in their composition, and their overall metallicity (represented by iron abundance, [Fe/H]) has been shown to correlate with the likelihood of hosting a planetary system. Furthermore, the detailed chemical composition of a system can give insight into the possible properties of the system's known exoplanets. Using high-resolution spectra, I quantify the abundances of up to 28 elements in each stellar component of the binary systems 16 Cyg, 83 Leo, HD 109749, and HD 195019. A direct comparison is made between each star and its binary companion to give a differential composition for each system. For each star, a comparison of elemental abundance vs. condensation temperature is made, which may be a good diagnostic of refractory-rich terrestrial planets in a system. The elemental ratios C/O and Mg/Si, crucial in determining the atmospheric composition and mineralogy of planets, are calculated and discussed for each star. Finally, the compositions and diagnostics of each binary system are discussed in terms of the known planetary and stellar parameters for each system.
ContributorsCarande, Bryce (Author) / Young, Patrick (Thesis advisor) / Patience, Jennifer L (Thesis advisor) / Anbar, Ariel D (Committee member) / Arizona State University (Publisher)
Created2013
Description
Understanding the properties and formation histories of individual stars in galaxies remains one of the most important areas in astrophysics. The impact of the Hubble Space Telescope<\italic> (HST<\italic>) has been revolutionary, providing deep observations of nearby galaxies at high resolution and unprecedented sensitivity over a wavelength range from near-ultraviolet to near-infrared. In this study, I use deep HST<\italic> imaging observations of three nearby star-forming galaxies (M83, NGC 4214, and CGCG 269-049) based on the HST<\italic> observations, in order to provide to construct color-magnitude and color-color diagrams of their resolved stellar populations. First, I select 50 regions in the spiral arm and inter-arm areas of M83, and determine the age distribution of the luminous stellar populations in each region. I developed an innovative method of star-by-star correction for internal extinction to improve stellar age and mass estimates. I compare the extinction-corrected ages of the 50 regions with those determined from several independent methods. The young stars are much more likely to be found in concentrated aggregates along spiral arms, while older stars are more dispersed. These results are consistent with a scenario where star formation is associated with the spiral arms, and stars form primarily in star clusters before dispersing on short timescales to form the field population. I address the effects of spatial resolution on the measured colors, magnitudes, and age estimates. While individual stars can occasionally show measurable differences in the colors and magnitudes, the age estimates for entire regions are only slightly affected. The same procedure is applied to nearby starbursting dwarf NGC 4214 to study the distributions of young and old stellar populations. Lastly, I describe the analysis of the HST<\italic> and Spitzer Space Telescope<\italic> observations of the extremely metal-poor dwarf galaxy (XMPG) CGCG 269-049 at a distance of 4.96 Mpc. This galaxy is one of the most metal-poor known with 12+log(O/H)=7.43. I find clear evidence for the presence of an old stellar population in CGCG~269-049, ruling out the possibility that this galaxy is forming its first generation of stars, as originally proposed for XMPGs. This comprehensive study of resolved stellar populations in three nearby galaxies provides detailed view of the current state of star formation and evolution of galaxies.
ContributorsKim, Hwihyun (Author) / Windhorst, Rogier A (Thesis advisor) / Jansen, Rolf A (Committee member) / Rhoads, James E (Committee member) / Scannapieco, Evan (Committee member) / Young, Patrick (Committee member) / Arizona State University (Publisher)
Created2012
Description
A thorough exploration of star formation necessitates observation across the electromagnetic spectrum. In particular, observations in the submillimeter and ultra-violet allow one to observe very early stage star formation and to trace the evolution from molecular cloud collapse to stellar ignition. Submillimeter observations are essential for piercing the heart of heavily obscured stellar nurseries to observe star formation in its infancy. Ultra-violet observations allow one to observe stars just after they emerge from their surrounding environment, allowing higher energy radiation to escape. To make detailed observations of early stage star formation in both spectral regimes requires state-of-the-art detector technology and instrumentation. In this dissertation, I discuss the calibration and feasibility of detectors developed by Lawrence Berkeley National Laboratory and specially processed at the Jet Propulsion Laboratory to increase their quantum efficiency at far-ultraviolet wavelengths. A cursory treatment of the delta-doping process is presented, followed by a thorough discussion of calibration procedures developed at JPL and in the Laboratory for Astronomical and Space Instrumentation at ASU. Subsequent discussion turns to a novel design for a Modular Imager Cell forming one possible basis for construction of future large focal plane arrays. I then discuss the design, fabrication, and calibration of a sounding rocket imaging system developed using the MIC and these specially processed detectors. Finally, I discuss one scientific application of sub-mm observations. I used data from the Heinrich Hertz Sub-millimeter Telescope and the Sub-Millimeter Array (SMA) to observe sub-millimeter transitions and continuum emission towards AFGL 2591. I tested the use of vibrationally excited HCN emission to probe the protostellar accretion disk structure. I measured vibrationally excited HCN line ratios in order to elucidate the appropriate excitation mechanism. I find collisional excitation to be dominant, showing the emission originates in extremely dense (n&sim10;11 cm-3), warm (T&sim1000; K) gas. Furthermore, from the line profile of the v=(0, 22d, 0) transition, I find evidence for a possible accretion disk.
ContributorsVeach, Todd Justin (Author) / Scowen, Paul A (Thesis advisor) / Groppi, Christopher E (Thesis advisor) / Beasley, Matthew N (Committee member) / Rhoads, James E (Committee member) / Windhorst, Rogier A (Committee member) / Arizona State University (Publisher)
Created2012
Description
The only elements that were made in significant quantity during the Big Bang were hydrogen and helium, and to a lesser extent lithium. Depending on the initial mass of a star, it may eject some or all of the unique, newly formed elements into the interstellar medium. The enriched gas later collapses into new stars, which are able to form heavier elements due to the presence of the new elements. When we observe the abundances in a stellar regions, we are able to glean the astrophysical phenomena that occurred prior to its formation. I compile spectroscopic abundance data from 49 literature sources for 46 elements across 2836 stars in the solar neighborhood, within 150 pc of the Sun, to produce the Hypatia Catalog. I analyze the variability of the spread in abundance measurements reported for the same star by different surveys, the corresponding stellar atmosphere parameters adopted by various abundance determination methods, and the effect of normalizing all abundances to the same solar scale. The resulting abundance ratios [X/Fe] as a function of [Fe/H] are consistent with stellar nucleosynthetic processes and known Galactic thin-disk trends. I analyze the element abundances for 204 known exoplanet host-stars. In general, I find that exoplanet host-stars are not enriched more than the surrounding population of stars, with the exception of iron. I examine the stellar abundances with respect to both stellar and planetary physical properties, such as orbital period, eccentricity, planetary mass, stellar mass, and stellar color. My data confirms that exoplanet hosts are enriched in [Fe/H] but not in the refractory elements, per the self-enrichment theory for stellar composition. Lastly, I apply the Hypatia Catalog to the Catalog of Potentially Habitable Stellar Systems in order to investigate the abundances in the 1224 overlapping stars. By looking at stars similar to the Sun with respect to six bio-essential elements, I created maps that have located two ``habitability windows'' on the sky: (20.6hr, -4.8deg) and (22.6hr, -48.5deg). These windows may be of use in future targeted or beamed searches.
ContributorsHinkel, Natalie R (Author) / Timmes, Frank X (Thesis advisor) / Anbar, Ariel (Committee member) / Patience, Jennifer (Committee member) / Shumway, John (Committee member) / Young, Patrick (Committee member) / Arizona State University (Publisher)
Created2012
Description
How do we visualize environments outside our solar system? I have researched two very alien planets and their compositions with the goal of finding out how those differences would affect the way a planet appears on its surface. The first is a planet orbiting the nearby G type star Tau Ceti. This star has Mg/Si ratio of 1.78, compared to 1.2 found on the Earth. A planet formed around this star could have a very active surface, covered in volcanoes. The other planet is a hypothetical carbon planet that could orbit the star HD 144899. This star has a C/O ratio of 0.8, compared to 0.5 in the Sun. A planet formed here might be comprised mostly of carbides, with a hydrocarbon atmosphere. It would likely be geologically dead, the main forces shaping its surface being meteorites. Both planets, due to their extremes, would likely be barren and lifeless. The results of this project are two digital paintings showcasing my vision of these planets.
ContributorsGonzales, Joshua Michael (Author) / Young, Patrick (Thesis director) / Patience, Jennifer (Committee member) / Button, Melissa (Committee member) / Barrett, The Honors College (Contributor) / School of International Letters and Cultures (Contributor) / School of Art (Contributor)
Created2015-05
Description
The Star Planet Activity Research CubeSat (SPARCS) will be a 6U CubeSat devoted to photometric monitoring of M dwarfs in the far-ultraviolet (FUV) and near-ultraviolet (NUV) (160 and 280 nm respectively), measuring the time-dependent spectral slope, intensity and evolution of M dwarf stellar UV radiation. The delta-doped detectors baselined for SPARCS have demonstrated more than five times the in-band quantum efficiency of the detectors of GALEX. Given that red:UV photon emission from cool, low-mass stars can be million:one, UV observation of thes stars are susceptible to red light contamination. In addition to the high efficiency delta-doped detectors, SPARCS will include red-rejection filters to help minimize red leak. Even so, careful red-rejection and photometric calibration is needed. As was done for GALEX, white dwarfs are used for photometric calibration in the UV. We find that the use of white dwarfs to calibrate the observations of red stars leads to significant errors in the reported flux, due to the differences in white dwarf and red dwarf spectra. Here we discuss the planned SPARCS calibration model and the color correction, and demonstrate the importance of this correction when recording UV measurements of M stars taken by SPARCS.
ContributorsOsby, Ella (Author) / Shkolnik, Evgenya (Thesis director) / Ardila, David (Committee member) / School of Earth and Space Exploration (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
We designed and constructed a cryostat setup for MKID detectors. The goal for the cryostat is to have four stages: 40K, 4K, 1K and 250mK. Prior to the start of my thesis, the cryostat was reaching 70K and 9K on the first and second stages respectively. During the first semester of my thesis I worked on getting the second stage to reach below 4K such that it would be cold enough to add a sorption fridge to reach 250mK. Various parts were machined for the cryostat and some tweaks were made to existing pieces. The largest changes were we thinned our stainless steel supports from 2mm to 10mil and we added roughly 6-10 layers of multi-layer insulation to the first and second stages. Our result was that we now reach temperatures of 36K and 2.6K on the first and second stages respectively. Next we added the sorption fridge to the 4K stage by having the 4K stage remachined to allow the sorption fridge to be mounted to the stage. Then I designed a final, two stage, setup for the 1K and 250mK stages that has maximum capabilities of housing a six inch wafer for testing. The design was sent to a machinist, but the parts were unfinished by the end of my thesis, so the parts and stage were not tested. Once the cryostat was fully tested and proven to reach the necessary temperatures, preliminary testing was done on a Microwave Kinetic Inductance Detector (MKID) provided by Stanford. Data was collected on the resonance and quality factor as they shifted with final stage temperature (5K to 285mK) and with input power (60dB to 15dB). The data was analyzed and the results agreed within expectations, as the resonant frequency and quality factor shifted down with increased temperature on the MKID. Finally, a noise characterization setup was designed to test the noise of devices, but was not fully implemented.
ContributorsAbers, Paul (Author) / Mauskopf, Phil (Thesis director) / Groppi, Chris (Committee member) / Department of Physics (Contributor) / School of Earth and Space Exploration (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
The distribution of galaxies traces the structure of underlying dark matter, and carries signatures of both the cosmology that evolved the universe as well as details of how galaxies interact with their environment and each other. There are many ways to measure the clustering of galaxies, each with unique strengths, uses, theoretical background, and connection to other physical concepts. One uncommon clustering statistic is the Void Probability Function (VPF): it simply asks, how likely is a circle/sphere of a given size to be empty in your galaxy sample? Simple and efficient to calculate, the VPF is tied to all higher order volume-averaged correlation functions as the 0$^{\text{th}}$ moment of count-in-cells, and encodes information from higher order clustering that the robust two-point correlation function cannot always capture. Using simulations of Lyman-alpha emitting galaxies across either redshift history or the epoch of reionization, this work asks: how powerful is the VPF itself? When can and should it be used for galaxy clustering? What unique constraints or guidelines can it give for the pacing of reionization, in the Lyman-$\alpha$ Galaxies in the Epoch of Reionization (LAGER) narrowband survey or across the Roman Space Telescope grism? This work provides practical guidelines for creating and carrying out clustering studies using the the VPF, and motivates the use of the VPF for reionization. The VPF of LAEs can complement LAGER constraints for the end of reionization, and thoroughly inform the timing and pace of reionization with Roman.
ContributorsPerez, Lucia Alexandra (Author) / Malhotra, Sangeeta (Thesis advisor) / Butler, Nathaniel (Thesis advisor) / Groppi, Christopher (Committee member) / Scannapieco, Evan (Committee member) / Rhoads, James E (Committee member) / Arizona State University (Publisher)
Created2022
Description
Standard cosmological models predict that the first astrophysical sources formed from a Universe filled with neutral hydrogen (HI) around one hundred million years after the Big Bang. The transition into Cosmic Dawn (CD) that seeded all the structures seen today can only be probed directly by the 21-cm line of neutral hydrogen. Redshifted by the Hubble expansion, HI signal during CD is expected to be visible in radio frequencies. Precisely characterized and carefully calibrated low-frequency instruments are necessary to measure the predicted ~10-200 mK brightness temperature of this cosmological signal against foregrounds. This dissertation focuses on improving the existing instrumental and analysis techniques for the Experiment to Detect the Global EoR Signature (EDGES) and building capabilities for future space-based 21-cm instruments, including the Farside Array for Radio Science Investigations of the Dark ages and Exoplanets (FARSIDE) concept.Frequency-dependent antenna beams of 21-cm instruments limit the removal of bright galactic foreground emission (~10^3 - 10^4K) from observations. Using three electromagnetic simulation packages, I modeled the EDGES low-band antenna, including the ground plane and soil, and quantified its variations as a function of frequency. I compared simulated observations to sky data and obtained absolute agreement within 4% and qualitatively similar spectral structures.
I used the new open-source edges-analysis pipeline to carry out rigorous fits of the absorption feature on the same low-band data and lab calibration measurements as (Bowman et. al. 2018). Using a Bayesian framework, I tested a few calibration choices and found posteriors of the best-fit 21-cm model parameters well within the 1σ values reported in B18. To test for the ``global'' nature of the reported cosmic absorption feature, I performed a time-dependent analysis. Initial results from this analysis successfully retrieved physical estimates for the foregrounds and estimates of the cosmic signal consistent with previous findings.
The array layout of FARSIDE, a NASA probe-class concept to place a radio interferometer on the lunar farside, is a four-arm spiral configuration consisting of 128 dual-polarized antennas with a spatial offset between the phase centers of its orthogonal polarizations. I modeled the impact of direction-dependent beams and phase offsets on simulated observations of all four Stokes parameter images of a model and quantified its effects on the two primary science cases: 21-cm cosmology and exoplanet studies.
ContributorsMahesh, Nivedita (Author) / Bowman, Judd D (Thesis advisor) / Jacobs, Daniel C (Committee member) / Groppi, Christopher (Committee member) / Shkolnik, Evgenya (Committee member) / Windhorst, Rogier (Committee member) / Arizona State University (Publisher)
Created2022
Description
With the ability to observe the atmospheres of terrestrial exoplanets via transit spectroscopy on the near-term horizon, the possibility of atmospheric biosignatures has received considerable attention in astrobiology. While traditionally exoplanet scientists looking for life focused on biologically relevant trace gases such as O2 and CH4, this approach has raised the spectre of false positives. Therefore, to address these shortcomings, a new set of methods is required to provide higher confidence in life detection. One possible approach is measuring the topology of atmospheric chemical reaction networks (CRNs). To investigate and assess this approach, the ability of network-theoretic metrics to distinguish the distance from thermochemical equilibrium in the atmosphere of hot jupiters was tested. After modeling the atmospheres of hot jupiters over a range of initial conditions using the VULCAN modeling package, atmospheric CRNs were constructed from the converged models and their topology measured using the Python package NetworkX. I found that network metrics were able to predict the distance from thermochemical equilibrium better than atmospheric species abundances alone. Building on this success, I modeled 30,000 terrestrial worlds. These models divided into two categories: Anoxic Archean Earth-like planets that varied in terms of CH4 surface flux (modeled as either biotic or abiotic in origin), and modern Earth-like planets with and without a surface flux of CCl2F2 (to represent the presence of industrial civilizations). I constructed atmospheric CRNs from the converged models, and analyzed their topology. I found that network metrics could distinguish between atmospheres with and without the presence of life or technology. In particular, mean degree and average shortest path length consistently performed better at distinguishing between abiotic and biotic Archean-like atmospheres than CH4 abundance.
ContributorsFisher, Theresa Mason (Author) / Walker, Sara I (Thesis advisor) / Hartnett, Hilairy (Committee member) / Line, Michael (Committee member) / Shkolnik, Evgenya (Committee member) / Okie, Jordan (Committee member) / Arizona State University (Publisher)
Created2023