Matching Items (7)
Description
A thorough exploration of star formation necessitates observation across the electromagnetic spectrum. In particular, observations in the submillimeter and ultra-violet allow one to observe very early stage star formation and to trace the evolution from molecular cloud collapse to stellar ignition. Submillimeter observations are essential for piercing the heart of heavily obscured stellar nurseries to observe star formation in its infancy. Ultra-violet observations allow one to observe stars just after they emerge from their surrounding environment, allowing higher energy radiation to escape. To make detailed observations of early stage star formation in both spectral regimes requires state-of-the-art detector technology and instrumentation. In this dissertation, I discuss the calibration and feasibility of detectors developed by Lawrence Berkeley National Laboratory and specially processed at the Jet Propulsion Laboratory to increase their quantum efficiency at far-ultraviolet wavelengths. A cursory treatment of the delta-doping process is presented, followed by a thorough discussion of calibration procedures developed at JPL and in the Laboratory for Astronomical and Space Instrumentation at ASU. Subsequent discussion turns to a novel design for a Modular Imager Cell forming one possible basis for construction of future large focal plane arrays. I then discuss the design, fabrication, and calibration of a sounding rocket imaging system developed using the MIC and these specially processed detectors. Finally, I discuss one scientific application of sub-mm observations. I used data from the Heinrich Hertz Sub-millimeter Telescope and the Sub-Millimeter Array (SMA) to observe sub-millimeter transitions and continuum emission towards AFGL 2591. I tested the use of vibrationally excited HCN emission to probe the protostellar accretion disk structure. I measured vibrationally excited HCN line ratios in order to elucidate the appropriate excitation mechanism. I find collisional excitation to be dominant, showing the emission originates in extremely dense (n&sim10;11 cm-3), warm (T&sim1000; K) gas. Furthermore, from the line profile of the v=(0, 22d, 0) transition, I find evidence for a possible accretion disk.
ContributorsVeach, Todd Justin (Author) / Scowen, Paul A (Thesis advisor) / Groppi, Christopher E (Thesis advisor) / Beasley, Matthew N (Committee member) / Rhoads, James E (Committee member) / Windhorst, Rogier A (Committee member) / Arizona State University (Publisher)
Created2012
Description
Understanding the properties and formation histories of individual stars in galaxies remains one of the most important areas in astrophysics. The impact of the Hubble Space Telescope<\italic> (HST<\italic>) has been revolutionary, providing deep observations of nearby galaxies at high resolution and unprecedented sensitivity over a wavelength range from near-ultraviolet to near-infrared. In this study, I use deep HST<\italic> imaging observations of three nearby star-forming galaxies (M83, NGC 4214, and CGCG 269-049) based on the HST<\italic> observations, in order to provide to construct color-magnitude and color-color diagrams of their resolved stellar populations. First, I select 50 regions in the spiral arm and inter-arm areas of M83, and determine the age distribution of the luminous stellar populations in each region. I developed an innovative method of star-by-star correction for internal extinction to improve stellar age and mass estimates. I compare the extinction-corrected ages of the 50 regions with those determined from several independent methods. The young stars are much more likely to be found in concentrated aggregates along spiral arms, while older stars are more dispersed. These results are consistent with a scenario where star formation is associated with the spiral arms, and stars form primarily in star clusters before dispersing on short timescales to form the field population. I address the effects of spatial resolution on the measured colors, magnitudes, and age estimates. While individual stars can occasionally show measurable differences in the colors and magnitudes, the age estimates for entire regions are only slightly affected. The same procedure is applied to nearby starbursting dwarf NGC 4214 to study the distributions of young and old stellar populations. Lastly, I describe the analysis of the HST<\italic> and Spitzer Space Telescope<\italic> observations of the extremely metal-poor dwarf galaxy (XMPG) CGCG 269-049 at a distance of 4.96 Mpc. This galaxy is one of the most metal-poor known with 12+log(O/H)=7.43. I find clear evidence for the presence of an old stellar population in CGCG~269-049, ruling out the possibility that this galaxy is forming its first generation of stars, as originally proposed for XMPGs. This comprehensive study of resolved stellar populations in three nearby galaxies provides detailed view of the current state of star formation and evolution of galaxies.
ContributorsKim, Hwihyun (Author) / Windhorst, Rogier A (Thesis advisor) / Jansen, Rolf A (Committee member) / Rhoads, James E (Committee member) / Scannapieco, Evan (Committee member) / Young, Patrick (Committee member) / Arizona State University (Publisher)
Created2012
Description
In the past three decades with the deployment of space-based from x-rays to infrared telescopes and operation of 8-10 m class ground based telescopes, a hand-full of regions of the sky have emerged that probe the distant universe over relatively wide fields with the aim of understanding the assembly of apparently faint galaxies. To explore this new frontier, observations were made with the Large Binocular Cameras (LBCs) on the Large Binocular Telescope (LBT) of a well-studied deep field, GOODS-North, which has been observed by a wide range of telescopes from the radio to x-ray. I present a study of the trade-off between depth and resolution using a large number of LBT/LBC U-band and R-band imaging observations in the GOODS-N field. Having acquired over 30 hours of data (315 images with 5-6 minute exposures) for U-band and 27 hours for R-band (828 images with 2 minute exposures), multiple mosaics were generated, starting with images taken under the best atmospheric conditions (FWHM <0.8"). For subsequent mosaics, data with coarser seeing values were added in until the final, deepest mosaic included all images with FWHM <1.8". For each mosaic, object catalogs were made to compare the optimal-resolution, yet shallower image to the low-resolution but deeper image. For the brightest galaxies within the GOODS-N field, structure and clumpy features within the galaxies are more prominent in the optimal-resolution image compared to the deeper mosaics. I conclude that for studies of brighter galaxies and features within them, the optimal-resolution image should be used. However, to fully explore and understand the faintest objects, the deeper imaging with lower resolution are also required. For the 220 and 360 brightest galaxies in the U-band and R-band images respectively, there is only a marginal difference between the optimal-resolution and lower-resolution light-profiles and their integrated total fluxes. This helps constrain how much flux can be missed in galaxy outskirts, which is important for studies of Extragalactic Background Light. Finally, I also comment on a collection of galaxies in the field with tidal tails and streams, diffuse plumes, and bridges.
ContributorsAshcraft, Teresa Ann (Author) / Windhorst, Rogier A (Thesis advisor) / Borthakur, Sanchayeeta (Committee member) / Jansen, Rolf A (Committee member) / Scowen, Paul (Committee member) / Groppi, Chris (Committee member) / Arizona State University (Publisher)
Created2018
Description
An automated test system was developed to characterize detectors for the Kilopixel Array Pathfinder Project (KAPPa). KAPPa is an astronomy instrument that detects light at terahertz wavelengths using a 16-pixel heterodyne focal plane array. Although primarily designed for the KAPPa receiver, the test system can be used with other instruments to automate tests that might be tedious and time-consuming by hand. Mechanical components of the test setup include an adjustable structure of aluminum t-slot framing that supports a rotating chopper. Driven by a stepper motor, the chopper alternates between blackbodies at room temperature and 77 K. The cold load consists of absorbing material submerged in liquid nitrogen in an open Styrofoam cooler. Scripts written in Matlab and Python control the mechanical system, interface with receiver components, and process data. To calculate the equivalent noise temperature of a receiver, the y-factor method is used. Test system operation was verified by sweeping the local oscillator frequency and power level for two room temperature Schottky diode receivers from Virginia Diodes, Inc. The test system was then integrated with the KAPPa receiver, providing a low cost, simple, adaptable means to measure noise with minimal user intervention.
ContributorsKuenzi, Linda Christine (Author) / Groppi, Christopher (Thesis director) / Mauskopf, Philip (Committee member) / Kulesa, Craig (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2014-05
Description
Abstract Located in southeastern Arizona, the Large Binocular Telescope is a great local resource for ASU astronomy/cosmology researchers. As a ground-based observatory, the Large Binocular Telescope can effectively provide deep, complementary observations of science fields in the wavelength range of 3,500 to 10,000 Angstroms. This gives scientists a lot of opportunity for various science projects, which can lead to massive amounts of observations being taken by research schools with ties to the LBT. Such is the case with ASU, which has obtained over 30 hours of data in just the SDT Uspec filter on board the Large Binocular Camera (Blue) and much more time in other filters observing longer wavelengths. Because of this, there is a huge need for establishing a system that will allow the reduction of raw astronomical images from the LBT to be quickly, but accurately. This manuscript serves as a presentation of the work done over the 2015-2016 school year to establish a pipeline for reducing LBT raw science images as well as a guide for future undergraduates and graduates to reduce data on their own.
ContributorsVehonsky, Jacob Ryan (Author) / Windhorst, Rogier (Thesis director) / Jansen, Rolf (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Balloon-borne telescopes are an economic alternative to scientists seeking to study light compared to other ground- and space-based alternatives, such as the Keck Observatory and the Hubble Space Telescope. One such balloon-borne telescope is the Balloon-borne Large Aperture Submillimeter Telescope, or simply BLAST. Arizona State University was tasked with assembling one of the primary optics plates for the telescope's next mission. This plate, detailed in the following paragraphs, is designed to detect and capture submillimeter wavelength light. This will help scientists understand the formation and early life of stars. Due to its highly sensitive nature detecting light, the optics plate had to be carefully assembled following a strict assembly and testing procedure. Initially, error tolerances for the mirrors and plate were developed using a computer model, later to be compared to measured values. The engineering decisions made throughout the process pertained to every aspect of the plate, from ensuring the compliance of the engineering drawings to the polishing of the mirrors for testing. The assembly procedure itself was verified at the conclusion using a coordinate measuring machine (CMM) to analyze whether or not the plate was within defined error tolerances mentioned above. This data was further visualized within the document to show that the assembly procedure of the BLAST optics plate was successful. The largest error margins seen were approximately one order of magnitude lower than their tolerated limits, reflecting good engineering judgement and care applied to the manufacturing process. The plate has since been shipped offsite to continue testing and the assembly team is confident it will perform well within expected parameters.
ContributorsDombrowski, Shane Matthew (Author) / Groppi, Christopher (Thesis director) / Mauskopf, Philip (Committee member) / Underhill, Matthew (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The Star Planet Activity Research CubeSat (SPARCS) will be a 6U CubeSat devoted to photometric monitoring of M dwarfs in the far-ultraviolet (FUV) and near-ultraviolet (NUV) (160 and 280 nm respectively), measuring the time-dependent spectral slope, intensity and evolution of M dwarf stellar UV radiation. The delta-doped detectors baselined for SPARCS have demonstrated more than five times the in-band quantum efficiency of the detectors of GALEX. Given that red:UV photon emission from cool, low-mass stars can be million:one, UV observation of thes stars are susceptible to red light contamination. In addition to the high efficiency delta-doped detectors, SPARCS will include red-rejection filters to help minimize red leak. Even so, careful red-rejection and photometric calibration is needed. As was done for GALEX, white dwarfs are used for photometric calibration in the UV. We find that the use of white dwarfs to calibrate the observations of red stars leads to significant errors in the reported flux, due to the differences in white dwarf and red dwarf spectra. Here we discuss the planned SPARCS calibration model and the color correction, and demonstrate the importance of this correction when recording UV measurements of M stars taken by SPARCS.
ContributorsOsby, Ella (Author) / Shkolnik, Evgenya (Thesis director) / Ardila, David (Committee member) / School of Earth and Space Exploration (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05