Matching Items (6)
Filtering by
- All Subjects: Applied Mathematics
- All Subjects: MIMO
- Resource Type: Text
- Status: Published
Description
Traditional approaches to modeling microgrids include the behavior of each inverter operating in a particular network configuration and at a particular operating point. Such models quickly become computationally intensive for large systems. Similarly, traditional approaches to control do not use advanced methodologies and suffer from poor performance and limited operating range. In this document a linear model is derived for an inverter connected to the Thevenin equivalent of a microgrid. This model is then compared to a nonlinear simulation model and analyzed using the open and closed loop systems in both the time and frequency domains. The modeling error is quantified with emphasis on its use for controller design purposes. Control design examples are given using a Glover McFarlane controller, gain sched- uled Glover McFarlane controller, and bumpless transfer controller which are compared to the standard droop control approach. These examples serve as a guide to illustrate the use of multi-variable modeling techniques in the context of robust controller design and show that gain scheduled MIMO control techniques can extend the operating range of a microgrid. A hardware implementation is used to compare constant gain droop controllers with Glover McFarlane controllers and shows a clear advantage of the Glover McFarlane approach.
ContributorsSteenis, Joel (Author) / Ayyanar, Raja (Thesis advisor) / Mittelmann, Hans (Committee member) / Tsakalis, Konstantinos (Committee member) / Tylavsky, Daniel (Committee member) / Arizona State University (Publisher)
Created2013
Description
As the number of devices with wireless capabilities and the proximity of these devices to each other increases, better ways to handle the interference they cause need to be explored. Also important is for these devices to keep up with the demand for data rates while not compromising on industry established expectations of power consumption and mobility. Current methods of distributing the spectrum among all participants are expected to not cope with the demand in a very near future. In this thesis, the effect of employing sophisticated multiple-input, multiple-output (MIMO) systems in this regard is explored. The efficacy of systems which can make intelligent decisions on the transmission mode usage and power allocation to these modes becomes relevant in the current scenario, where the need for performance far exceeds the cost expendable on hardware. The effect of adding multiple antennas at either ends will be examined, the capacity of such systems and of networks comprised of many such participants will be evaluated. Methods of simulating said networks, and ways to achieve better performance by making intelligent transmission decisions will be proposed. Finally, a way of access control closer to the physical layer (a 'statistical MAC') and a possible metric to be used for such a MAC is suggested.
ContributorsThontadarya, Niranjan (Author) / Bliss, Daniel W (Thesis advisor) / Berisha, Visar (Committee member) / Ying, Lei (Committee member) / Arizona State University (Publisher)
Created2014
Description
A new method of adaptive mesh generation for the computation of fluid flows is investigated. The method utilizes gradients of the flow solution to adapt the size and stretching of elements or volumes in the computational mesh as is commonly done in the conventional Hessian approach. However, in the new method, higher-order gradients are used in place of the Hessian. The method is applied to the finite element solution of the incompressible Navier-Stokes equations on model problems. Results indicate that a significant efficiency benefit is realized.
ContributorsShortridge, Randall (Author) / Chen, Kang Ping (Thesis advisor) / Herrmann, Marcus (Thesis advisor) / Wells, Valana (Committee member) / Huang, Huei-Ping (Committee member) / Mittelmann, Hans (Committee member) / Arizona State University (Publisher)
Created2011
Description
The Kuramoto model is an archetypal model for studying synchronization in groups
of nonidentical oscillators where oscillators are imbued with their own frequency and
coupled with other oscillators though a network of interactions. As the coupling
strength increases, there is a bifurcation to complete synchronization where all oscillators
move with the same frequency and show a collective rhythm. Kuramoto-like
dynamics are considered a relevant model for instabilities of the AC-power grid which
operates in synchrony under standard conditions but exhibits, in a state of failure,
segmentation of the grid into desynchronized clusters.
In this dissertation the minimum coupling strength required to ensure total frequency
synchronization in a Kuramoto system, called the critical coupling, is investigated.
For coupling strength below the critical coupling, clusters of oscillators form
where oscillators within a cluster are on average oscillating with the same long-term
frequency. A unified order parameter based approach is developed to create approximations
of the critical coupling. Some of the new approximations provide strict lower
bounds for the critical coupling. In addition, these approximations allow for predictions
of the partially synchronized clusters that emerge in the bifurcation from the
synchronized state.
Merging the order parameter approach with graph theoretical concepts leads to a
characterization of this bifurcation as a weighted graph partitioning problem on an
arbitrary networks which then leads to an optimization problem that can efficiently
estimate the partially synchronized clusters. Numerical experiments on random Kuramoto
systems show the high accuracy of these methods. An interpretation of the
methods in the context of power systems is provided.
of nonidentical oscillators where oscillators are imbued with their own frequency and
coupled with other oscillators though a network of interactions. As the coupling
strength increases, there is a bifurcation to complete synchronization where all oscillators
move with the same frequency and show a collective rhythm. Kuramoto-like
dynamics are considered a relevant model for instabilities of the AC-power grid which
operates in synchrony under standard conditions but exhibits, in a state of failure,
segmentation of the grid into desynchronized clusters.
In this dissertation the minimum coupling strength required to ensure total frequency
synchronization in a Kuramoto system, called the critical coupling, is investigated.
For coupling strength below the critical coupling, clusters of oscillators form
where oscillators within a cluster are on average oscillating with the same long-term
frequency. A unified order parameter based approach is developed to create approximations
of the critical coupling. Some of the new approximations provide strict lower
bounds for the critical coupling. In addition, these approximations allow for predictions
of the partially synchronized clusters that emerge in the bifurcation from the
synchronized state.
Merging the order parameter approach with graph theoretical concepts leads to a
characterization of this bifurcation as a weighted graph partitioning problem on an
arbitrary networks which then leads to an optimization problem that can efficiently
estimate the partially synchronized clusters. Numerical experiments on random Kuramoto
systems show the high accuracy of these methods. An interpretation of the
methods in the context of power systems is provided.
ContributorsGilg, Brady (Author) / Armbruster, Dieter (Thesis advisor) / Mittelmann, Hans (Committee member) / Scaglione, Anna (Committee member) / Strogatz, Steven (Committee member) / Welfert, Bruno (Committee member) / Arizona State University (Publisher)
Created2018
Description
This dissertation develops a second order accurate approximation to the magnetic resonance (MR) signal model used in the PARSE (Parameter Assessment by Retrieval from Single Encoding) method to recover information about the reciprocal of the spin-spin relaxation time function (R2*) and frequency offset function (w) in addition to the typical steady-state transverse magnetization (M) from single-shot magnetic resonance imaging (MRI) scans. Sparse regularization on an approximation to the edge map is used to solve the associated inverse problem. Several studies are carried out for both one- and two-dimensional test problems, including comparisons to the first order approximation method, as well as the first order approximation method with joint sparsity across multiple time windows enforced. The second order accurate model provides increased accuracy while reducing the amount of data required to reconstruct an image when compared to piecewise constant in time models. A key component of the proposed technique is the use of fast transforms for the forward evaluation. It is determined that the second order model is capable of providing accurate single-shot MRI reconstructions, but requires an adequate coverage of k-space to do so. Alternative data sampling schemes are investigated in an attempt to improve reconstruction with single-shot data, as current trajectories do not provide ideal k-space coverage for the proposed method.
ContributorsJesse, Aaron Mitchel (Author) / Platte, Rodrigo (Thesis advisor) / Gelb, Anne (Committee member) / Kostelich, Eric (Committee member) / Mittelmann, Hans (Committee member) / Moustaoui, Mohamed (Committee member) / Arizona State University (Publisher)
Created2019
Description
Global optimization (programming) has been attracting the attention of researchers for almost a century. Since linear programming (LP) and mixed integer linear programming (MILP) had been well studied in early stages, MILP methods and software tools had improved in their efficiency in the past few years. They are now fast and robust even for problems with millions of variables. Therefore, it is desirable to use MILP software to solve mixed integer nonlinear programming (MINLP) problems. For an MINLP problem to be solved by an MILP solver, its nonlinear functions must be transformed to linear ones. The most common method to do the transformation is the piecewise linear approximation (PLA). This dissertation will summarize the types of optimization and the most important tools and methods, and will discuss in depth the PLA tool. PLA will be done using nonuniform partitioning of the domain of the variables involved in the function that will be approximated. Also partial PLA models that approximate only parts of a complicated optimization problem will be introduced. Computational experiments will be done and the results will show that nonuniform partitioning and partial PLA can be beneficial.
ContributorsAlkhalifa, Loay (Author) / Mittelmann, Hans (Thesis advisor) / Armbruster, Hans (Committee member) / Escobedo, Adolfo (Committee member) / Renaut, Rosemary (Committee member) / Sefair, Jorge (Committee member) / Arizona State University (Publisher)
Created2020