Matching Items (3)
Filtering by
- All Subjects: Ripples
- Creators: Seo, Jae-Sun
Description
State of art modern System-On-Chip architectures often require very low noise supplies without overhead on high efficiencies. Low noise supplies are especially important in noise sensitive analog blocks such as high precision Analog-to-Digital Converters, Phase Locked Loops etc., and analog signal processing blocks. Switching regulators, while providing high efficiency power conversion suffer from inherent ripple on their output. A typical solution for high efficiency low noise supply is to cascade switching regulators with Low Dropout linear regulators (LDO) which generate inherently quiet supplies. The switching frequencies of switching regulators keep scaling to higher values in order to reduce the sizes of the passive inductor and capacitors at the output of switching regulators. This poses a challenge for existing solutions of switching regulators followed by LDO since the Power Supply Rejection (PSR) of LDOs are band-limited. In order to achieve high PSR over a wideband, the penalty would be to increase the quiescent power consumed to increase the bandwidth of the LDO and increase in solution area of the LDO. Hence, an alternative to the existing approach is required which improves the ripple cancellation at the output of switching regulator while overcoming the deficiencies of the LDO.
This research focuses on developing an innovative technique to cancel the ripple at the output of switching regulator which is scalable across a wide range of switching frequencies. The proposed technique consists of a primary ripple canceller and an auxiliary ripple canceller, both of which facilitate in the generation of a quiet supply and help to attenuate the ripple at the output of buck converter by over 22dB. These techniques can be applied to any DC-DC converter and are scalable across frequency, load current, output voltage as compared to LDO without significant overhead on efficiency or area. The proposed technique also presents a fully integrated solution without the need of additional off-chip components which, considering the push for full-integration of Power Management Integrated Circuits, is a big advantage over using LDOs.
This research focuses on developing an innovative technique to cancel the ripple at the output of switching regulator which is scalable across a wide range of switching frequencies. The proposed technique consists of a primary ripple canceller and an auxiliary ripple canceller, both of which facilitate in the generation of a quiet supply and help to attenuate the ripple at the output of buck converter by over 22dB. These techniques can be applied to any DC-DC converter and are scalable across frequency, load current, output voltage as compared to LDO without significant overhead on efficiency or area. The proposed technique also presents a fully integrated solution without the need of additional off-chip components which, considering the push for full-integration of Power Management Integrated Circuits, is a big advantage over using LDOs.
ContributorsJoshi, Kishan (Author) / Bakkaloglu, Bertan (Thesis advisor) / Garrity, Douglas (Committee member) / Seo, Jae-Sun (Committee member) / Arizona State University (Publisher)
Created2016
Description
The information era has brought about many technological advancements in the past
few decades, and that has led to an exponential increase in the creation of digital images and
videos. Constantly, all digital images go through some image processing algorithm for
various reasons like compression, transmission, storage, etc. There is data loss during this
process which leaves us with a degraded image. Hence, to ensure minimal degradation of
images, the requirement for quality assessment has become mandatory. Image Quality
Assessment (IQA) has been researched and developed over the last several decades to
predict the quality score in a manner that agrees with human judgments of quality. Modern
image quality assessment (IQA) algorithms are quite effective at prediction accuracy, and
their development has not focused on improving computational performance. The existing
serial implementation requires a relatively large run-time on the order of seconds for a single
frame. Hardware acceleration using Field programmable gate arrays (FPGAs) provides
reconfigurable computing fabric that can be tailored for a broad range of applications.
Usually, programming FPGAs has required expertise in hardware descriptive languages
(HDLs) or high-level synthesis (HLS) tool. OpenCL is an open standard for cross-platform,
parallel programming of heterogeneous systems along with Altera OpenCL SDK, enabling
developers to use FPGA's potential without extensive hardware knowledge. Hence, this
thesis focuses on accelerating the computationally intensive part of the most apparent
distortion (MAD) algorithm on FPGA using OpenCL. The results are compared with CPU
implementation to evaluate performance and efficiency gains.
few decades, and that has led to an exponential increase in the creation of digital images and
videos. Constantly, all digital images go through some image processing algorithm for
various reasons like compression, transmission, storage, etc. There is data loss during this
process which leaves us with a degraded image. Hence, to ensure minimal degradation of
images, the requirement for quality assessment has become mandatory. Image Quality
Assessment (IQA) has been researched and developed over the last several decades to
predict the quality score in a manner that agrees with human judgments of quality. Modern
image quality assessment (IQA) algorithms are quite effective at prediction accuracy, and
their development has not focused on improving computational performance. The existing
serial implementation requires a relatively large run-time on the order of seconds for a single
frame. Hardware acceleration using Field programmable gate arrays (FPGAs) provides
reconfigurable computing fabric that can be tailored for a broad range of applications.
Usually, programming FPGAs has required expertise in hardware descriptive languages
(HDLs) or high-level synthesis (HLS) tool. OpenCL is an open standard for cross-platform,
parallel programming of heterogeneous systems along with Altera OpenCL SDK, enabling
developers to use FPGA's potential without extensive hardware knowledge. Hence, this
thesis focuses on accelerating the computationally intensive part of the most apparent
distortion (MAD) algorithm on FPGA using OpenCL. The results are compared with CPU
implementation to evaluate performance and efficiency gains.
ContributorsGunavelu Mohan, Aswin (Author) / Sohoni, Sohum (Thesis advisor) / Ren, Fengbo (Thesis advisor) / Seo, Jae-Sun (Committee member) / Arizona State University (Publisher)
Created2017
Description
With the push for integration, a slew of modern switching power management circuits are operating at higher switching frequencies in order to reduce passive filter sizes. But while these switching regulators provide power conversion at high efficiencies, their output is prone to ripples due to the inherent switching behavior. These switching regulators use linear-low dropout regulators (LDOs) downstream to provide clean supplies. Typically, these LDOs have good power supply rejection (PSR) at lower frequencies but this degrades at higher frequencies. Therefore, some residual ripple is still manifested on the output. Because of this, high power supply rejection (PSR) with a wide rejection frequency band is becoming a critical requirement in linear low-dropout regulators (LDOs) used in complex systems- on-chip (SOCs).
Typical LDOs achieve higher PSR within their loop-bandwidth; however, their supply rejection performance degrades with reduced loop-gain outside their loop- bandwidth. The LDOs with external filtering capacitors may also have spectral peaking in their PSR response, causing excess system- level supply noise. This work presents an LDO design approach, which achieves a PSR of higher than 68 dB up to 2 MHz frequency and over a wide range of loads up to 250 mA. The wide PSR bandwidth is achieved using a current-mode feedforward ripple canceller (CFFRC) amplifier which provides up to 25 dB of PSR improvement. The feedforward path gain is inherently matched to the forward gain of the LDO, not requiring calibration. The LDO has a fast load transient response with a recovery time of 6.1μs and has a quiescent current of 5.6μA. For a full load transition, the LDO achieves settling with overshoot and undershoot voltages below 27.6 mV and 36.36 mV, respectively. The LDO is designed and fabricated in a 180 nm bipolar/CMOS/DMOS (BCD) technology. The CFFRC amplifier helps to achieve low quiescent power due to its inherent current mode nature, eliminating the need for supply ripple summing amplifiers and adaptive biasing.
Typical LDOs achieve higher PSR within their loop-bandwidth; however, their supply rejection performance degrades with reduced loop-gain outside their loop- bandwidth. The LDOs with external filtering capacitors may also have spectral peaking in their PSR response, causing excess system- level supply noise. This work presents an LDO design approach, which achieves a PSR of higher than 68 dB up to 2 MHz frequency and over a wide range of loads up to 250 mA. The wide PSR bandwidth is achieved using a current-mode feedforward ripple canceller (CFFRC) amplifier which provides up to 25 dB of PSR improvement. The feedforward path gain is inherently matched to the forward gain of the LDO, not requiring calibration. The LDO has a fast load transient response with a recovery time of 6.1μs and has a quiescent current of 5.6μA. For a full load transition, the LDO achieves settling with overshoot and undershoot voltages below 27.6 mV and 36.36 mV, respectively. The LDO is designed and fabricated in a 180 nm bipolar/CMOS/DMOS (BCD) technology. The CFFRC amplifier helps to achieve low quiescent power due to its inherent current mode nature, eliminating the need for supply ripple summing amplifiers and adaptive biasing.
ContributorsJoshi, Kishan (Author) / Bakkaloglu, Bertan (Thesis advisor) / Garrity, Douglas (Committee member) / Seo, Jae-Sun (Committee member) / Kitchen, Jennifer (Committee member) / Arizona State University (Publisher)
Created2020