Matching Items (7)
Filtering by
- All Subjects: 3D Printing
- Creators: Aukes, Daniel
Description
Magnetic Resonance Imaging using spiral trajectories has many advantages in speed, efficiency in data-acquistion and robustness to motion and flow related artifacts. The increase in sampling speed, however, requires high performance of the gradient system. Hardware inaccuracies from system delays and eddy currents can cause spatial and temporal distortions in the encoding gradient waveforms. This causes sampling discrepancies between the actual and the ideal k-space trajectory. Reconstruction assuming an ideal trajectory can result in shading and blurring artifacts in spiral images. Current methods to estimate such hardware errors require many modifications to the pulse sequence, phantom measurements or specialized hardware. This work presents a new method to estimate time-varying system delays for spiral-based trajectories. It requires a minor modification of a conventional stack-of-spirals sequence and analyzes data collected on three orthogonal cylinders. The method is fast, robust to off-resonance effects, requires no phantom measurements or specialized hardware and estimate variable system delays for the three gradient channels over the data-sampling period. The initial results are presented for acquired phantom and in-vivo data, which show a substantial reduction in the artifacts and improvement in the image quality.
ContributorsBhavsar, Payal (Author) / Pipe, James G (Thesis advisor) / Frakes, David (Committee member) / Kodibagkar, Vikram (Committee member) / Arizona State University (Publisher)
Created2013
Description
This paper summarizes the [1] ideas behind, [2] needs, [3] development, and [4] testing of 3D-printed sensor-stents known as Stentzors. This sensor was successfully developed entirely from scratch, tested, and was found to have an output of 3.2*10-6 volts per RMS pressure in pascals. This paper also recommends further work to render the Stentzor deployable in live subjects, including [1] further design optimization, [2] electrical isolation, [3] wireless data transmission, and [4] testing for aneurysm prevention.
ContributorsMeidinger, Aaron Michael (Author) / LaBelle, Jeffrey (Thesis director) / Frakes, David (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2014-05
Description
The advent of medical imaging has enabled significant advances in pre-procedural planning, allowing cardiovascular anatomy to be visualized noninvasively before a procedure. However, absolute scale and tactile information are not conveyed in traditional pre-procedural planning based on images alone. This information deficit fails to completely prepare clinicians for complex heart repair, where surgeons must consider the varied presentations of cardiac morphology and malformations. Three-dimensional (3D) visualization and 3D printing provide a mechanism to construct patient-specific, scale models of cardiovascular anatomy that surgeons and interventionalists can examine prior to a procedure. In addition, the same patient-specific models provide a valuable resource for educating future medical professionals. Instead of looking at idealized images on a computer screen or pages from medical textbooks, medical students can review a life-like model of patient anatomy.
In cases where surgical repair is insufficient to return the heart to normal function, a patient may proceed to advanced heart failure, and a heart transplant may be required. Unfortunately, a finite number of available donor hearts are available. A mechanical circulatory support (MCS) device can be used to bridge the time between heart failure and reception of a donor heart. These MCS devices are typically constructed for the adult population. Accordingly, the size associated to the device is a limiting factor for small adults or pediatric patients who often have smaller thoracic measurements. While current eligibility criteria are based on correlative measurements, the aforementioned 3D visualization capabilities can be leveraged to accomplish patient-specific fit analysis.
The main objectives of the work presented in this dissertation were 1) to develop and evaluate an optimized process for 3D printing cardiovascular anatomy for surgical planning and medical education and 2) to develop and evaluate computational tools to assess MCS device fit in specific patients. The evaluations for objectives 1 and 2 were completed with a collection of qualitative and quantitative validations. These validations include case studies to illustrate meaningful, qualitative results as well as quantitative results from surgical outcomes. The latter results present the first quantitative supporting evidence, beyond anecdotal case studies, regarding the efficacy of 3D printing for pre-procedural planning; this data is suitable as pilot data for clinical trials. The products of this work were used to plan 200 cardiovascular procedures (including 79 cardiothoracic surgeries at Phoenix Children's Hospital), via 3D printed heart models and assess MCS device fit in 29 patients across 6 countries.
In cases where surgical repair is insufficient to return the heart to normal function, a patient may proceed to advanced heart failure, and a heart transplant may be required. Unfortunately, a finite number of available donor hearts are available. A mechanical circulatory support (MCS) device can be used to bridge the time between heart failure and reception of a donor heart. These MCS devices are typically constructed for the adult population. Accordingly, the size associated to the device is a limiting factor for small adults or pediatric patients who often have smaller thoracic measurements. While current eligibility criteria are based on correlative measurements, the aforementioned 3D visualization capabilities can be leveraged to accomplish patient-specific fit analysis.
The main objectives of the work presented in this dissertation were 1) to develop and evaluate an optimized process for 3D printing cardiovascular anatomy for surgical planning and medical education and 2) to develop and evaluate computational tools to assess MCS device fit in specific patients. The evaluations for objectives 1 and 2 were completed with a collection of qualitative and quantitative validations. These validations include case studies to illustrate meaningful, qualitative results as well as quantitative results from surgical outcomes. The latter results present the first quantitative supporting evidence, beyond anecdotal case studies, regarding the efficacy of 3D printing for pre-procedural planning; this data is suitable as pilot data for clinical trials. The products of this work were used to plan 200 cardiovascular procedures (including 79 cardiothoracic surgeries at Phoenix Children's Hospital), via 3D printed heart models and assess MCS device fit in 29 patients across 6 countries.
ContributorsRyan, Justin Robert (Author) / Frakes, David (Thesis advisor) / Collins, Daniel (Committee member) / LaBelle, Jeffrey (Committee member) / Pizziconi, Vincent (Committee member) / Pophal, Stephen (Committee member) / Arizona State University (Publisher)
Created2015
Description
With the advent of GPGPU, many applications are being accelerated by using CUDA programing paradigm. We are able to achieve around 10x -100x speedups by simply porting the application on to the GPU and running the parallel chunk of code on its multi cored SIMT (Single instruction multiple thread) architecture. But for optimal performance it is necessary to make sure that all the GPU resources are efficiently used, and the latencies in the application are minimized. For this, it is essential to monitor the Hardware usage of the algorithm and thus diagnose the compute and memory bottlenecks in the implementation. In the following thesis, we will be analyzing the mapping of CUDA implementation of BLIINDS-II algorithm on the underlying GPU hardware, and come up with a Kepler architecture specific solution of using shuffle instruction via CUB library to tackle the two major bottlenecks in the algorithm. Experiments were conducted to convey the advantage of using shuffle instru3ction in algorithm over only using shared memory as a buffer to global memory. With the new implementation of BLIINDS-II algorithm using CUB library, a speedup of around 13.7% was achieved.
ContributorsWadekar, Ameya (Author) / Sohoni, Sohum (Thesis advisor) / Aukes, Daniel (Committee member) / Redkar, Sangram (Committee member) / Arizona State University (Publisher)
Created2017
Description
While many 3D printed structures are rigid and stationary, the potential for complex geometries offers a chance for creative and useful motion. Printing structures larger than the print bed, reducing the need for support materials, maintaining multiple states without actuation, and mimicking origami folding are some of the opportunities offered by 3D printed hinges. Current efforts frequently employ advanced materials and equipment that are not available to all users. The purpose of this project was to develop a parametric, print-in-place, self-locking hinge that could be printed using very basic materials and equipment. Six main designs were developed, printed, and tested for their strength in maintaining a locked position. Two general design types were used: 1) sliding hinges and 2) removable pin hinges. The test results were analyzed to identify and explain the causes of observed trends. The amount of interference between the pin vertex and knuckle hole edge was identified as the main factor in hinge strength. After initial testing, the designs were modified and applied to several structures, with successful results for a collapsible hexagon and a folding table. While the initial goal was to have one CAD model as a final product, the need to evaluate tradeoffs depending on the exact application made this impossible. Instead, a set of design guidelines was created to help users make strategic decisions and create their own design. Future work could explore additional scaling effects, printing factors, or other design types.
ContributorsAndreotti, Jaimee Jeannette (Author) / Bhate, Dhruv (Thesis director) / Aukes, Daniel (Committee member) / Dean, W.P. Carey School of Business (Contributor) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
Multi-material fabrication allows for the creation of individual parts composed of several materials with distinct properties, providing opportunities for integrating mechanisms into monolithic components. Components produced in this manner will have material boundaries which may be points of failure. However, the unique capabilities of multi-material fabrication allow for the use of graded material transitions at these boundaries to mitigate the impact of abrupt material property changes.
The goal of this work is to identify methods of creating graded material transitions that can improve the ultimate tensile strength of a multi-material component while maintaining other model properties. Particular focus is given towards transitions that can be produced using low cost manufacturing equipment. This work presents a series of methods for creating graded material transitions which include previously established transition types as well as several novel techniques. Test samples of each transition type were produced using additive manufacturing and their performance was measured. It is shown that some types of transitions can increase the ultimate strength of a part, while others may introduce new stress concentrations that reduce performance. This work then presents a method for adjusting the elastic modulus of a component to which graded material transitions have been added to allow the original design properties to be met.
The goal of this work is to identify methods of creating graded material transitions that can improve the ultimate tensile strength of a multi-material component while maintaining other model properties. Particular focus is given towards transitions that can be produced using low cost manufacturing equipment. This work presents a series of methods for creating graded material transitions which include previously established transition types as well as several novel techniques. Test samples of each transition type were produced using additive manufacturing and their performance was measured. It is shown that some types of transitions can increase the ultimate strength of a part, while others may introduce new stress concentrations that reduce performance. This work then presents a method for adjusting the elastic modulus of a component to which graded material transitions have been added to allow the original design properties to be met.
ContributorsBrauer, Cole (Author) / Aukes, Daniel (Thesis advisor) / Chen, Xiangfan (Committee member) / Sugar, Thomas (Committee member) / Arizona State University (Publisher)
Created2020
Description
Multi-material manufacturing combines multiple fabrication processes to produce individual parts that can be made up of several different materials. These processes can include both additive and subtractive manufacturing methods as well as embedding other components during manufacturing. This yields opportunities for creating single parts that can take the place of an assembly of parts produced using conventional techniques. Some example applications of multi-material manufacturing include parts that are produced using one process then machined to tolerance using another, parts with integrated flexible joints, or parts that contain discrete embedded components such as reinforcing materials or electronics.
Multi-material manufacturing has applications in robotics because, with it, mechanisms can be built into a design without adding additional moving parts. This allows for robot designs that are both robust and low cost, making it a particularly attractive method for education or research. 3D printing is of particular interest in this area because it is low cost, readily available, and capable of easily producing complicated part geometries. Some machines are also capable of depositing multiple materials during a single process. However, up to this point, planning the steps to create a part using multi-material manufacturing has been done manually, requiring specialized knowledge of the tools used. The difficulty of this planning procedure can prevent many students and researchers from using multi-material manufacturing.
This project studied methods of automating the planning of multi-material manufacturing processes through the development of a computational framework for processing 3D models and automatically generating viable manufacturing sequences. This framework includes solid operations and algorithms which assist the designer in computing manufacturing steps for multi-material models. This research is informing the development of a software planning tool which will simplify the planning needed by multi-material fabrication, making it more accessible for use in education or research.
In our paper, Voxel-Based Cad Framework for Planning Functionally Graded and Multi-Step Rapid Fabrication Processes, we present a new framework for representing and computing functionally-graded materials for use in rapid prototyping applications. We introduce the material description itself, low-level operations which can be used to combine one or more geometries together, and algorithms which assist the designer in computing manufacturing-compatible sequences. We then apply these techniques to several example scenarios. First, we demonstrate the use of a Gaussian blur to add graded material transitions to a model which can then be produced using a multi-material 3D printing process. Our second example highlights our solution to the problem of inserting a discrete, off-the-shelf part into a 3D printed model during the printing sequence. Finally, we implement this second example and manufacture two example components.
Multi-material manufacturing has applications in robotics because, with it, mechanisms can be built into a design without adding additional moving parts. This allows for robot designs that are both robust and low cost, making it a particularly attractive method for education or research. 3D printing is of particular interest in this area because it is low cost, readily available, and capable of easily producing complicated part geometries. Some machines are also capable of depositing multiple materials during a single process. However, up to this point, planning the steps to create a part using multi-material manufacturing has been done manually, requiring specialized knowledge of the tools used. The difficulty of this planning procedure can prevent many students and researchers from using multi-material manufacturing.
This project studied methods of automating the planning of multi-material manufacturing processes through the development of a computational framework for processing 3D models and automatically generating viable manufacturing sequences. This framework includes solid operations and algorithms which assist the designer in computing manufacturing steps for multi-material models. This research is informing the development of a software planning tool which will simplify the planning needed by multi-material fabrication, making it more accessible for use in education or research.
In our paper, Voxel-Based Cad Framework for Planning Functionally Graded and Multi-Step Rapid Fabrication Processes, we present a new framework for representing and computing functionally-graded materials for use in rapid prototyping applications. We introduce the material description itself, low-level operations which can be used to combine one or more geometries together, and algorithms which assist the designer in computing manufacturing-compatible sequences. We then apply these techniques to several example scenarios. First, we demonstrate the use of a Gaussian blur to add graded material transitions to a model which can then be produced using a multi-material 3D printing process. Our second example highlights our solution to the problem of inserting a discrete, off-the-shelf part into a 3D printed model during the printing sequence. Finally, we implement this second example and manufacture two example components.
ContributorsBrauer, Cole D (Author) / Aukes, Daniel (Thesis director) / Sodemann, Angela (Committee member) / Engineering Programs (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05