Filtering by
- All Subjects: 3D Printing
In cases where surgical repair is insufficient to return the heart to normal function, a patient may proceed to advanced heart failure, and a heart transplant may be required. Unfortunately, a finite number of available donor hearts are available. A mechanical circulatory support (MCS) device can be used to bridge the time between heart failure and reception of a donor heart. These MCS devices are typically constructed for the adult population. Accordingly, the size associated to the device is a limiting factor for small adults or pediatric patients who often have smaller thoracic measurements. While current eligibility criteria are based on correlative measurements, the aforementioned 3D visualization capabilities can be leveraged to accomplish patient-specific fit analysis.
The main objectives of the work presented in this dissertation were 1) to develop and evaluate an optimized process for 3D printing cardiovascular anatomy for surgical planning and medical education and 2) to develop and evaluate computational tools to assess MCS device fit in specific patients. The evaluations for objectives 1 and 2 were completed with a collection of qualitative and quantitative validations. These validations include case studies to illustrate meaningful, qualitative results as well as quantitative results from surgical outcomes. The latter results present the first quantitative supporting evidence, beyond anecdotal case studies, regarding the efficacy of 3D printing for pre-procedural planning; this data is suitable as pilot data for clinical trials. The products of this work were used to plan 200 cardiovascular procedures (including 79 cardiothoracic surgeries at Phoenix Children's Hospital), via 3D printed heart models and assess MCS device fit in 29 patients across 6 countries.
3D printing prosthetics for amputees is an innovative opportunity to provide a lower cost and customized alternative to current technologies. Companies, such as E-NABLE and YouBionic are developing myoelectric prosthetics, electrically powered terminal devices activated by electromyography (EMG), for transradial amputees. Prosthetics that are 3D printed are less expensive for juvenile use, more sustainable, and more accessible for those without insurance. Although they are typically not outfitted with the same complex grip patterns or durability of a traditional myoelectric prosthetic, they offer a sufficient durability (withstanding up to 150 N on average) and allow for new opportunities in prosthetic development. Devils Prosthetics, a student research and development group associated with Engineering Projects in Community Service (EPICS), has investigated the benefits and pitfalls of utilizing polyethylene terephthalate glycol (PETG) for 3D printing prosthetics as well as combining a MyoWare EMG sensor with machine learning for optimal control of the prosthetic.
3D printing prosthetics for amputees is an innovative opportunity to provide a lower cost and customized alternative to current technologies. Companies, such as E-NABLE and YouBionic are developing myoelectric prosthetics, electrically powered terminal devices activated by electromyography (EMG), for transradial amputees. Prosthetics that are 3D printed are less expensive for juvenile use, more sustainable, and more accessible for those without insurance. Although they are typically not outfitted with the same complex grip patterns or durability of a traditional myoelectric prosthetic, they offer a sufficient durability (withstanding up to 150 N on average) and allow for new opportunities in prosthetic development. Devils Prosthetics, a student research and development group associated with Engineering Projects in Community Service (EPICS), has investigated the benefits and pitfalls of utilizing polyethylene terephthalate glycol (PETG) for 3D printing prosthetics as well as combining a MyoWare EMG sensor with machine learning for optimal control of the prosthetic.
As a result of the increase of pollution related to industrialization in Vietnam, acid rain has become a prevalent issue for Vietnamese farmers who are forced to rinse their crops – risking damage due to overwatering and poor harvest. Thus, the team was motivated to develop a solution to harmful impacts of acidic rainwater by creating a system with the ability to capture rainwater and determine its level of acidity in order to optimize the crop watering process, and promote productive crops. By conducting preliminary research on rainfall and tropical climate in Vietnam, existing products on the market, and pH sensors for monitoring and device material, the team was able to design a number of devices to collect, store, and measure the pH of rainwater. After developing a number of initial design requirements based on the needs of the farmers, a final prototype was developed using the best aspects of each initial design. Tests were conducted with varying structural and aqueous materials to represent a broad range of environmental conditions. While the scope of the project was ultimately limited to prototyping purposes, the principles explored throughout this thesis project can successfully be applied to a fully-functioning production model available for commercial use on Vietnamese farms. Given more time for development, improvements would be made in the extent of materials tested, and the configuration of electronics and data acquisition, in order to further optimize the process of determining rainwater acidity.
3D printing prosthetics for amputees is an innovative opportunity to provide a lower cost and customized alternative to current technologies. Companies, such as E-NABLE and YouBionic are developing myoelectric prosthetics, electrically powered terminal devices activated by electromyography (EMG), for transradial amputees. Prosthetics that are 3D printed are less expensive for juvenile use, more sustainable, and more accessible for those without insurance. Although they are typically not outfitted with the same complex grip patterns or durability of a traditional myoelectric prosthetic, they offer a sufficient durability (withstanding up to 150 N on average) and allow for new opportunities in prosthetic development. Devils Prosthetics, a student research and development group associated with Engineering Projects in Community Service (EPICS), has investigated the benefits and pitfalls of utilizing polyethylene terephthalate glycol (PETG) for 3D printing prosthetics as well as combining a MyoWare EMG sensor with machine learning for optimal control of the prosthetic.