Matching Items (15)
Filtering by
- All Subjects: Metabolic Engineering
- All Subjects: E. coli
- Creators: Chemical Engineering Program
Description
The increased shift towards environmentalism has brought notable attention to a universal excessive plastic consumption and subsequent plastic overload in landfills. Among these plastics, polyethylene terephthalate, more commonly known as PET, constitutes a large percentage of the waste that ends up in landfills. Material and chemical/thermal methods for recycling are both costly, and inefficient, which necessitates a more sustainable and cheaper alternative. The current study aims at fulfilling that role through genetic engineering of Bacillus subtilis with integration of genes from LCC, Ideonella sakaiensis, and Bacillus subtilis. The plasmid construction was done through restriction cloning. A recombinant plasmid for the expression of LCC was constructed, and transformed into Escherichia coli. Future experiments for this study should include redesigning of primers, with possible combination of signal peptides with genes during construct design, and more advanced assays for effective outcomes.
ContributorsKalscheur, Bethany Ann (Author) / Varman, Arul (Thesis director) / Andino, Jean (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
Depletion of fossil fuel resources has led to the investigation of alternate feedstocks for and methods of chemical synthesis, in particular the use of E. coli biocatalysts to produce fine commodity chemicals from renewable glucose sources. Production of phenol, 2-phenylethanol, and styrene was investigated, in particular the limitation in yield and accumulation that results from high product toxicity. This paper examines two methods of product toxicity mitigation: the use of efflux pumps and the separation of pathways which produce less toxic intermediates. A library of 43 efflux pumps from various organisms were screened for their potential to confer resistance to phenol, 2-phenylethanol, and styrene on an E. coli host. A pump sourced from P. putida was found to allow for increased host growth in the presence of styrene as compared to a cell with no efflux pump. The separation of styrene producing pathway was also investigated. Cells capable of performing the first and latter halves of the synthesis were allowed to grow separately and later combined in order to capitalize on the relatively lower toxicity of the intermediate, trans-cinnamate. The styrene production and yield from this separated set of cultures was compared to that resulting from the growth of cells containing the full set of styrene synthesis genes. Results from this experiment were inconclusive.
ContributorsLallmamode, Noor Atiya Jabeen (Author) / Nielsen, David (Thesis director) / Cadillo-Quiroz, Hinsby (Committee member) / Barrett, The Honors College (Contributor) / Chemical Engineering Program (Contributor) / School of Life Sciences (Contributor)
Created2015-05
Description
The goals of the styrene oxide adsorption experiments were to develop reliable isotherms of styrene oxide onto Dowex Optipore L-493 resin and onto mesoporous carbon adsorbents, in addition to determining the ideal conditions for styrene oxide production from E. coli. Adsorption is an effective means of separation used in industry to separate compounds, often organics from air and water. Styrene oxide adsorption runs without E. coli were conducted at concentrations ranging from 0.15 to 3.00 g/L with resin masses ranging from 0.1 to 0.5 g of Dowex Optipore L-493 and 0.5 to 0.75 g of mesoporous carbon adsorbent. Runs were conducted on a shake plate operating at 80 rpm for 24 hours at ambient temperature. Isotherms were developed from the results and then adsorption experiments with E. coli and L-493 were performed. Runs were conducted at glucose concentrations ranging from 20-40 g/L and resin masses of 0.100 g to 0.800 g. Samples were incubated for 72 hours and styrene oxide production was measured using an HPLC device. Specific loading values reached up to 0.356 g/g for runs without E. coli and nearly 0.003 g of styrene oxide was adsorbed by L-493 during runs with E. coli. Styrene oxide production was most effective at low resin masses and medium glucose concentrations when produced by E. coli.
ContributorsHsu, Joshua (Co-author) / Oremland, Zachary (Co-author) / Nielsen, David (Thesis director) / Staggs, Kyle (Committee member) / Barrett, The Honors College (Contributor) / Chemical Engineering Program (Contributor) / School of Sustainability (Contributor)
Created2014-05
Description
Lignin is a naturally abundant source of aromatic carbon but is largely underutilized in industry because it is difficult to decompose. Under the current study we engineered Corynebacterium glutamicum for the depolymerization of lignin with the goal of using it as raw feed for the sustainable production of valuable chemicals. C. glutamicum is a standout candidate for the depolymerization and assimilation of lignin because of its performance as an industrial producer of amino acids, resistance to aromatic compounds in lignin, and low extracellular protease activity. Three different foreign and native ligninolytic enzymes were tested in combination with three signal peptides to assess lignin degradation efficacy. At this stage, six of the nine plasmid constructs have been constructed.
ContributorsEllis, Dylan Scott (Author) / Varman, Arul Mozhy (Thesis director) / Nannenga, Brent (Committee member) / Nowroozi, Farnaz (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
Due to the wide range of health properties flavonoids possess, flavonoids are sold in health supplements to the general public. Flavonoids are also utilized in research but have a high cost due to current production techniques. This project focuses on engineering two DNA recombinants to develop new strains of Corynebacterium glutamicum that can produce flavonoids pinocembrin and naringenin. After culturing Escherichia coli colonies containing genes of interest, the genes were collected and purified by PCR reactions. The recombinant plasmid was assembled using CPEC and successfully transformed into Escherichia coli, with plans to transform Corynebacterium glutamicum to experiment and determine which recombinant can produce more pinocembrin and naringenin. Design work for other DNA recombinants, which were not the focus of this project, was also completed.
ContributorsWong, Adam (Co-author, Co-author) / Varman, Arul Mozhy (Thesis director) / Nielsen, David (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Cyanobacteria have the potential to efficiently produce L-serine, an industrially important amino acid, directly from CO2 and sunlight, which is a more sustainable and inexpensive source of energy as compared to current methods. The research aims to engineer a strain of Cyanobacterium Synechococcus sp. PCC 7002 that increases L-serine production by mutating regulatory mechanisms that natively inhibit its production and encoding an exporter. While an excess of L-serine was not found in the supernatant of the cell cultures, with further fine tuning of the metabolic pathway and culture conditions, high titers of L-serine can be found. With the base strain engineered, the work can be extended and optimized by deleting degradation pathways, tuning gene expression levels, optimizing growth conditions, and investigating the effects of nitrogen supplementation for the strain.
ContributorsAbed, Omar (Author) / Nielsen, David (Thesis director) / Jones, Christopher (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The field of bioprocess engineering has become an increasingly popular route to produce chemicals and fuels in a sustainable fashion. Bioprocessing is an interdisciplinary field that joins chemical engineering, metabolic engineering, and synthetic biology to tackle problems that will arise from the ongoing use of products derived from non-renewable resources. This study will overlook two effective tools that are widely used in the bioprocessing field. The first tool that was studied was strain optimization for biochemical production. This involves genetic manipulation of microbial hosts to create strains that are more efficient at producing the desired products. The second tool that was studied was adaptive laboratory evolution which is used to enhance overall cellular fitness. Enhancing the overall fitness and efficiency of these microbial production factories, allows for innovation and growth in the biochemical industry. Creating sustainable and renewable solutions for both specialty and commodity chemicals.
Strain optimization was specifically studied by enhancing inorganic carbon uptake in synechococcus sp. 7002. It is desired to have both high flux and high affinity transport for the rapid and efficient uptake of HCO3- for enhanced cell growth. The results found that the regulatory gene for carbon transporters in synechococcus genome was successfully deleted. Increasing the toxicity limits of 2-Phenylethanol was done by using adaptive laboratory evolution (ALE). ALE is a widely used practice in biotechnology studies to gain insights on mechanisms of molecular evolution and to better define the functionality of microbial cell factories. It was found that after growing E. coli BW25113 under selective conditions the genome evolved for a higher fitness medium with an increased concentration of 2-Phenylethanol. Overall, two key tools used in bioprocess engineering were successful studied to gain a better insight on the future of biochemical production industry.
Strain optimization was specifically studied by enhancing inorganic carbon uptake in synechococcus sp. 7002. It is desired to have both high flux and high affinity transport for the rapid and efficient uptake of HCO3- for enhanced cell growth. The results found that the regulatory gene for carbon transporters in synechococcus genome was successfully deleted. Increasing the toxicity limits of 2-Phenylethanol was done by using adaptive laboratory evolution (ALE). ALE is a widely used practice in biotechnology studies to gain insights on mechanisms of molecular evolution and to better define the functionality of microbial cell factories. It was found that after growing E. coli BW25113 under selective conditions the genome evolved for a higher fitness medium with an increased concentration of 2-Phenylethanol. Overall, two key tools used in bioprocess engineering were successful studied to gain a better insight on the future of biochemical production industry.
ContributorsSteeber, Gavin Lyle (Author) / Nielsen, David (Thesis director) / Jones, Christopher (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Escherichia coli is a bacterium that is used widely in metabolic engineering due to its ability to grow at a fast rate and to be cultured easily. E. coli can be engineered to produce many valuable chemicals, including biofuels and L-Phenylalanine—a precursor to many pharmaceuticals. Significant cell growth occurs in parallel to the biosynthesis of the desired biofuel or biochemical product, and limits product concentrations and yields. Stopping cell growth can improve chemical production since more resources will go toward chemical production than toward biomass. The goal of the project is to test different methods of controlling microbial uptake of nutrients, specifically phosphate, to dynamically limit cell growth and improve biochemical production of E. coli, and the research has the potential to promote public health, sustainability, and environment. This can be achieved by targeting phosphate transporter genes using CRISPRi and CRISPR, and they will limit the uptake of phosphate by targeting the phosphate transporter genes in DNA, which will stop transcriptions of the genes. In the experiment, NST74∆crr∆pykAF, a L-Phe overproducer, was used as the base strain, and the pitA phosphate transporter gene was targeted in the CRISPRi and CRISPR systems with the strain with other phosphate transporters knocked out. The tested CRISPRi and CRISPR mechanisms did not stop cell growth or improved L-Phe production. Further research will be conducted to determine the problem of the system. In addition, the CRISPRi and CRISPR systems that target multiple phosphate transporter genes will be tested in the future as well as the other method of stopping transcriptions of the phosphate transporter genes, which is called a tunable toggle switch mechanism.
ContributorsPark, Min Su (Author) / Nielsen, David (Thesis director) / Machas, Michael (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
One of the primary bottlenecks to chemical production in biological organisms is the toxicity of the chemical. Overexpression of efflux pumps has been shown to increase tolerance to aromatic compounds such as styrene and styrene oxide. Tight control of pump expression is necessary to maximize titers and prevent excessive strain on the cells. This study aimed to identify aromatic-sensitive native promoters and heterologous biosensors for construction of closed-loop control of efflux pump expression in E. coli. Using a promoter library constructed by Zaslaver et al., activation was measured through GFP output. Promoters were evaluated for their sensitivity to the addition of one of four aromatic compounds, their "leaking" of signal, and their induction threshold. Out of 43 targeted promoters, 4 promoters (cmr, mdtG, yahN, yajR) for styrene oxide, 2 promoters (mdtG, yahN) for styrene, 0 promoters for 2-phenylethanol, and 1 promoter for phenol (pheP) were identified as ideal control elements in aromatic bioproduction. In addition, a series of three biosensors (NahR, XylS, DmpR) known to be inducible by other aromatics were screened against styrene oxide, 2-phenylethanol, and phenol. The targeted application of these biosensors is aromatic-induced activation of linked efflux pumps. All three biosensors responded strongly in the presence of styrene oxide and 2-phenylethanol, with minor activation in the presence of phenol. Bioproduction of aromatics continues to gain traction in the biotechnology industry, and the continued discovery of aromatic-inducible elements will be essential to effective pathway control.
ContributorsXu, Jimmy (Author) / Nielsen, David (Thesis director) / Wang, Xuan (Committee member) / School of Life Sciences (Contributor) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Membrane proteins are essential for cell survival and show potential as pharmacological and therapeutic targets in the field of nanobiotechnology.[1,2] In spite of their promise in these fields, research surrounding membrane proteins lags since their over-expression often leads to cell toxicity and death.[3,4] It was hypothesized that membrane protein expression could be regulated and optimized by modifying the heat shock response of Escherichia coli (E. coli). To test this hypothesis, the membrane protein expression pathway was reprogrammed using gene-blocks that were antisense to vital membrane protein DNA and RNA binding-site sequences and included an IbpA-σ32 heat shock promoter. Anti-PBAD and anti-HtdR gene-blocks were designed to have antisense sequences to the DNA of the arabinose PBAD promotor and Haloterrigena turkmenica deltarhodopsin (HtdR) transmembrane protein respectively. These sequences were then employed to be cloned into a pMM102 vector and grown in NEB-5α E. coli cells.
Stable glycerol stocks of the pIbpA-antiPBAD and pIbpA-antiHtdR in BW25113 cells with either a pBLN200 or pHtdR200 plasmid were created. Then after inducing the cells with L-arabinose and 10mM all-trans retinal to allow for membrane protein expression, spectrophotometry was used to test the optical density of the cells at an absorbance of 600nm. Although general trends showed that the pHtdR200-pMM102 and pHtdR200-pIbpA cells had lower optical densities than the pBLN200 cells of all types, the results were determined to be statistically insignificant. Continuing, the pHtdR200 cells of all types showed a purple phenotype when spun down, as expected, while the cells with the pBLN200 plasmid had a colorless phenotype in pellet form. Further work will include cloning a GFP gene-block to test the ability of the anti-PBAD sequence in tuning the transcription of the GFP protein.
Stable glycerol stocks of the pIbpA-antiPBAD and pIbpA-antiHtdR in BW25113 cells with either a pBLN200 or pHtdR200 plasmid were created. Then after inducing the cells with L-arabinose and 10mM all-trans retinal to allow for membrane protein expression, spectrophotometry was used to test the optical density of the cells at an absorbance of 600nm. Although general trends showed that the pHtdR200-pMM102 and pHtdR200-pIbpA cells had lower optical densities than the pBLN200 cells of all types, the results were determined to be statistically insignificant. Continuing, the pHtdR200 cells of all types showed a purple phenotype when spun down, as expected, while the cells with the pBLN200 plasmid had a colorless phenotype in pellet form. Further work will include cloning a GFP gene-block to test the ability of the anti-PBAD sequence in tuning the transcription of the GFP protein.
ContributorsBoese, Julia Nicole (Author) / Nannenga, Brent (Thesis director) / Holloway, Julianne (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05