Filtering by
- All Subjects: Materials Science
The two general categories of structural health monitoring (SHM) systems include passive and active monitoring. Active SHM systems utilize an input of energy to monitor the health of a structure (such as sound waves in ultrasonics), while passive systems do not. As such, passive SHM tends to be more desirable. A system could be permanently fixed to a critical location, passively accepting signals until it records a damage event, then localize and characterize the damage. This is the goal of acoustic emissions testing.
When certain types of damage occur, such as matrix cracking or delamination in composites, the corresponding release of energy creates sound waves, or acoustic emissions, that propagate through the material. Audio sensors fixed to the surface can pick up data from both the time and frequency domains of the wave. With proper data analysis, a time of arrival (TOA) can be calculated for each sensor allowing for localization of the damage event. The frequency data can be used to characterize the damage.
In traditional acoustic emissions testing, the TOA combined with wave velocity and information about signal attenuation in the material is used to localize events. However, in instances of complex geometries or anisotropic materials (such as carbon fibre composites), velocity and attenuation can vary wildly based on the direction of interest. In these cases, localization can be based off of the time of arrival distances for each sensor pair. This technique is called Delta T mapping, and is the main focus of this study.
The goal of this experiment was to examine the energy absorption properties of origami-inspired honeycomb and standard honeycomb structures. These structures were 3D printed with two different materials: thermoplastic polyurethane (TPU) and acrylonitrile butadiene styrene (ABS). Quasi-static compression testing was performed on these structures for both types and materials at various wall thicknesses. The energy absorption and other material properties were analyzed for each structure. Overall, the results indicate that origami-inspired structures perform best at energy absorption at a higher wall thickness with a rigid material. The results also indicated that standard honeycomb structures perform better with lower wall thickness, and also perform better with a rigid, rather than a flexible material. Additionally, it was observed that a flexible material, like TPU, better demonstrates the folding and recovery properties of origami-inspired structures. The results of this experiment have applications wherever honeycomb structures are used, mostly on aircraft and spacecraft. In vehicles with structures of a sufficiently high wall thickness with a rigid material, origami-inspired honeycomb structures could be used instead of current honeycomb structures in order to better protect the passengers or payload through improved energy absorption.