Matching Items (56)
Filtering by
- All Subjects: Materials Science
- Creators: Jiao, Yang
- Creators: Rajagopalan, Jagannathan
Description
Transition metal di- and tri-halides (TMH) have recently gathered research attention owing to their intrinsic magnetism all the way down to their two-dimensional limit. 2D magnets, despite being a crucial component for realizing van der Waals heterostructures and devices with various functionalities, were not experimentally proven until very recently in 2017. The findings opened up enormous possibilities for studying new quantum states of matter that can enable potential to design spintronic, magnetic memory, data storage, sensing, and topological devices. However, practical applications in modern technologies demand materials with various physical and chemical properties such as electronic, optical, structural, catalytic, magnetic etc., which cannot be found within single material systems. Considering that compositional modifications in 2D systems lead to significant changes in properties due to the high anisotropy inherent to their crystallographic structure, this work focuses on alloying of TMH compounds to explore the potentials for tuning their properties. In this thesis, the ternary cation alloys of Co(1-x)Ni(x)Cl(2) and Mo(1-x)Cr(x)Cl(3) were synthesized via chemical vapor transport at a various stoichiometry. Their compositional, structural, and magnetic properties were studied using Energy Dispersive Spectroscopy, Raman Spectroscopy, X-Ray Diffraction, and Vibrating Sample Magnetometry. It was found that completely miscible ternary alloys of Co(1-x)Ni(x)Cl(2) show an increasing Néel temperature with nickel concentration. The Mo(1-x)Cr(x)Cl(3) alloy shows potential magnetic phase changes induced by the incorporation of molybdenum species within the host CrCl3 lattice. Magnetic measurements give insight into potential antiferromagnetic to ferromagnetic transition with molybdenum incorporation, accompanied by a shift in the magnetic easy-axis from parallel to perpendicular. Phase separation was found in the Fe(1-x)Cr(x)Cl(3) ternary alloy indicating that crystallographic structure compatibility plays an essential role in determining the miscibility of two parent compounds. Alloying across two similar (TMH) compounds appears to yield predictable results in properties as in the case of Co(1-x)Ni(x)Cl(2), while more exotic transitions, as in the case of Mo(1-x)Cr(x)Cl(3), can emerge by alloying dissimilar compounds. When dissimilarity reaches a certain limit, as with Fe(1-x)Cr(x)Cl(3), phase separation becomes more favorable. Future studies focusing on magnetic and structural phase transitions will reveal more insight into the effect of alloying in these TMH systems.
ContributorsKolari, Pranvera (Author) / Tongay, Sefaattin (Thesis advisor) / Jiao, Yang (Committee member) / Muhich, Christopher (Committee member) / Arizona State University (Publisher)
Created2020
Description
Traditionally nanoporous gold is created by selective dissolution of silver or copper from a binary silver-gold or copper-gold alloy. These alloys serve as prototypical model systems for a phenomenon referred to as stress-corrosion cracking. Stress-corrosion cracking is the brittle failure of a normally ductile material occurring in a corrosive environment under a tensile stress. Silver-gold can experience this type of brittle fracture for a range of compositions. The corrosion process in this alloy results in a bicontinuous nanoscale morphology composed of gold-rich ligaments and voids often referred to as nanoporous gold. Experiments have shown that monolithic nanoporous gold can sustain high speed cracks which can then be injected into parent-phase alloy. This work compares nanoporous gold created from ordered and disordered copper-gold using digital image analysis and electron backscatter diffraction. Nanoporous gold from both disordered copper-gold and silver-gold, and ordered copper-gold show that grain orientation and shape remain largely unchanged by the dealloying process. Comparing the morphology of the nanoporous gold from ordered and disordered copper-gold with digital image analysis, minimal differences are found between the two and it is concluded that they are not statistically significant. This reveals the robust nature of nanoporous gold morphology against small variations in surface diffusion and parent-phase crystal structure.
Then the corrosion penetration down the grain boundary is compared to the depth of crack injections in polycrystal silver-gold. Based on statistical comparison, the crack-injections penetrate into the parent-phase grain boundary beyond the corrosion-induced porosity. To compare crack injections to stress-corrosion cracking, single crystal silver-gold samples are employed. Due to the cleavage-like nature of the fracture surfaces, electron backscatter diffraction is possible and employed to compare the crystallography of stress-corrosion crack surfaces and crack-injection surfaces. From the crystallographic similarities of these fracture surfaces, it is concluded that stress-corrosion can occur via a series of crack-injection events. This relationship between crack injections and stress corrosion cracking is further examined using electrochemical data from polycrystal silver-gold samples during stress-corrosion cracking. The results support the idea that crack injection is a mechanism for stress-corrosion cracking.
Then the corrosion penetration down the grain boundary is compared to the depth of crack injections in polycrystal silver-gold. Based on statistical comparison, the crack-injections penetrate into the parent-phase grain boundary beyond the corrosion-induced porosity. To compare crack injections to stress-corrosion cracking, single crystal silver-gold samples are employed. Due to the cleavage-like nature of the fracture surfaces, electron backscatter diffraction is possible and employed to compare the crystallography of stress-corrosion crack surfaces and crack-injection surfaces. From the crystallographic similarities of these fracture surfaces, it is concluded that stress-corrosion can occur via a series of crack-injection events. This relationship between crack injections and stress corrosion cracking is further examined using electrochemical data from polycrystal silver-gold samples during stress-corrosion cracking. The results support the idea that crack injection is a mechanism for stress-corrosion cracking.
ContributorsKarasz, Erin (Author) / Sieradzki, Karl (Thesis advisor) / Chawla, Nikhilesh (Committee member) / Peralta, Pedro (Committee member) / Rajagopalan, Jagannathan (Committee member) / Arizona State University (Publisher)
Created2020
Description
Single-layer pentagonal materials have received limited attention compared with their counterparts with hexagonal structures. They are two-dimensional (2D) materials with pentagonal structures, that exhibit novel electronic, optical, or magnetic properties. There are 15 types of pentagonal tessellations which allow plenty of options for constructing 2D pentagonal lattices. Few of them have been explored theoretically or experimentally. Studying this new type of 2D materials with density functional theory (DFT) will inspire the discovery of new 2D materials and open up applications of these materials in electronic and magnetic devices.In this dissertation, DFT is applied to discover novel 2D materials with pentagonal structures. Firstly, I examine the possibility of forming a 2D nanosheet with the vertices of type 15 pentagons occupied by boron, silicon, phosphorous, sulfur, gallium, germanium or tin atoms. I obtain different rearranged structures such as a single-layer gallium sheet with triangular patterns. Then the exploration expands to other 14 types of pentagons, leading to the discoveries of carbon nanosheets with Cairo tessellation (type 2/4 pentagons) and other patterns. The resulting 2D structures exhibit diverse electrical properties. Then I reveal the hidden Cairo tessellations in the pyrite structures and discover a family of planar 2D materials (such as PtP2), with a chemical formula of AB2 and space group pa ̄3. The combination of DFT and geometries opens up a novel route for the discovery of new 2D materials. Following this path, a series of 2D pentagonal materials such as 2D CoS2 are revealed with promising electronic and magnetic applications. Specifically, the DFT calculations show that CoS2 is an antiferromagnetic semiconductor with a band gap of 2.24 eV, and a N ́eel temperature of about 20 K. In order to enhance the superexchange interactions between the ions in this binary compound, I explore the ternary 2D pentagonal material CoAsS, that lacks the inversion symmetry. I find out CoAsS exhibits a higher Curie temperature of 95 K and a sizable piezoelectricity (d11=-3.52 pm/V). In addition to CoAsS, 34 ternary 2D pentagonal materials are discovered, among which I focus on FeAsS, that is a semiconductor showing strong magnetocrystalline anisotropy and sizable Berry curvature. Its magnetocrystalline anisotropy energy is 440 μeV/Fe ion, higher than many other 2D magnets that have been found.
Overall, this work not only provides insights into the structure-property relationship of 2D pentagonal materials and opens up a new route of studying 2D materials by combining geometry and computational materials science, but also shows the potential applications of 2D pentagonal materials in electronic and magnetic devices.
Overall, this work not only provides insights into the structure-property relationship of 2D pentagonal materials and opens up a new route of studying 2D materials by combining geometry and computational materials science, but also shows the potential applications of 2D pentagonal materials in electronic and magnetic devices.
ContributorsLiu, Lei (Author) / Zhuang, Houlong (Thesis advisor) / Singh, Arunima (Committee member) / Jiao, Yang (Committee member) / Arizona State University (Publisher)
Created2020
Description
Energy return in footwear is associated with the damping behavior of midsole foams, which stems from the combination of cellular structure and polymeric material behavior. Recently, traditional ethyl vinyl acetate (EVA) foams have been replaced by BOOST(TM) foams, thereby reducing the energetic cost of running. These are bead foams made from expanded thermoplastic polyurethane (eTPU), which have a multi-scale structure consisting of fused porous beads, at the meso-scale, and thousands of small closed cells within the beads at the micro-scale. Existing predictive models coarsely describe the macroscopic behavior but do not take into account strain localizations and microstructural heterogeneities. Thus, enhancement in material performance and optimization requires a comprehensive understanding of the foam’s cellular structure at all length scales and its influence on mechanical response.
This dissertation focused on characterization and deformation behavior of eTPU bead foams with a unique graded cell structure at the micro and meso-scale. The evolution of the foam structure during compression was studied using a combination of in situ lab scale and synchrotron x-ray tomography using a four-dimensional (4D, deformation + time) approach. A digital volume correlation (DVC) method was developed to elucidate the role of cell structure on local deformation mechanisms. The overall mechanical response was also studied ex situ to probe the effect of cell size distribution on the force-deflection behavior. The radial variation in porosity and ligament thickness profoundly influenced the global mechanical behavior. The correlation of changes in void size and shape helped in identifying potentially weak regions in the microstructure. Strain maps showed the initiation of failure in cell structure and it was found to be influenced by the heterogeneities around the immediate neighbors in a cluster of voids. Poisson’s ratio evaluated from DVC was related to the microstructure of the bead foams. The 4D approach taken here provided an in depth and mechanistic understanding of the material behavior, both at the bead and plate levels, that will be invaluable in designing the next generation of high-performance footwear.
This dissertation focused on characterization and deformation behavior of eTPU bead foams with a unique graded cell structure at the micro and meso-scale. The evolution of the foam structure during compression was studied using a combination of in situ lab scale and synchrotron x-ray tomography using a four-dimensional (4D, deformation + time) approach. A digital volume correlation (DVC) method was developed to elucidate the role of cell structure on local deformation mechanisms. The overall mechanical response was also studied ex situ to probe the effect of cell size distribution on the force-deflection behavior. The radial variation in porosity and ligament thickness profoundly influenced the global mechanical behavior. The correlation of changes in void size and shape helped in identifying potentially weak regions in the microstructure. Strain maps showed the initiation of failure in cell structure and it was found to be influenced by the heterogeneities around the immediate neighbors in a cluster of voids. Poisson’s ratio evaluated from DVC was related to the microstructure of the bead foams. The 4D approach taken here provided an in depth and mechanistic understanding of the material behavior, both at the bead and plate levels, that will be invaluable in designing the next generation of high-performance footwear.
ContributorsSundaram Singaravelu, Arun Sundar (Author) / Chawla, Nikhilesh (Thesis advisor) / Emady, Heather (Committee member) / Jiao, Yang (Committee member) / Arizona State University (Publisher)
Created2020
Description
Precursors of carbon fibers include rayon, pitch, and polyacrylonitrile fibers that can be heat-treated for high-strength or high-modulus carbon fibers. Among them, polyacrylonitrile has been used most frequently due to its low viscosity for easy processing and excellent performance for high-end applications. To further explore polyacrylonitrile-based fibers for better precursors, in this study, carbon nanofillers were introduced in the polymer matrix to examine their reinforcement effects and influences on carbon fiber performance. Two-dimensional graphene nanoplatelets were mainly used for the polymer reinforcement and one-dimensional carbon nanotubes were also incorporated in polyacrylonitrile as a comparison. Dry-jet wet spinning was used to fabricate the composite fibers. Hot-stage drawing and heat-treatment were used to evolve the physical microstructures and molecular morphologies of precursor and carbon fibers. As compared to traditionally used random dispersions, selective placement of nanofillers was effective in improving composite fiber properties and enhancing mechanical and functional behaviors of carbon fibers. The particular position of reinforcement fillers with polymer layers was enabled by the in-house developed spinneret used for fiber spinning. The preferential alignment of graphitic planes contributed to the enhanced mechanical and functional behaviors than those of dispersed nanoparticles in polyacrylonitrile composites. The high in-plane modulus of graphene and the induction to polyacrylonitrile molecular carbonization/graphitization were the motivation for selectively placing graphene nanoplatelets between polyacrylonitrile layers. Mechanical tests, scanning electron microscopy, thermal, and electrical properties were characterized. Applications such as volatile organic compound sensing and pressure sensing were demonstrated.
ContributorsFranklin, Rahul Joseph (Author) / Song, Kenan (Thesis advisor) / Jiao, Yang (Thesis advisor) / Liu, Yongming (Committee member) / Arizona State University (Publisher)
Created2020
Description
Single drop impact of liquid on a static powder bed was studied to investigate the granule formation mechanism, droplet penetration time, the characterization of granules (morphology, surface structure and internal structure), as well as the formation regime map. Water was used as the liquid and two pharmaceutical powders, microcrystalline cellulose (MCC) and acetaminophen (APAP), were mixed to make heterogeneous powder beds. The complete drop impact and penetration was recorded by a high-speed camera. Two granule formation mechanisms identified previously occurred: Spreading and Tunneling. Spreading occurred for mixtures of large particle sizes, while Tunneling started to occur when the particle sizes of the mixtures decreased. With an increase of APAP concentration, the overall drop penetration time increased, which was in good agreement with previous literature. The granule morphology, surface structure, and internal structure were characterized by a prism method with image analysis, scanning electron microscope, and X-ray microtomography, respectively. The Spreading mechanism produced flat disks with porous internal structures, while the Tunneling mechanism produced round granules with dense internal structures. Granules that were formed via a hybrid of the mechanisms, Spreading/Tunneling, were hybrid granules, with some dense areas and some porous areas. The results of the granule content uniformity from UV-vis spectrometry revealed that with the increase of APAP proportion, the overall uniformity was compromised for mixtures with fine ingredients, while the content was much more uniform for coarse mixtures. It is believed that the mean particle size of the powder bed is the predominant factor in influencing the formation mechanism, drop penetration time, and granule properties, while the content uniformity is affected by both the particle sizes and the mixture hydrophobicity.
ContributorsGao, Tianxiang (Author) / Emady, Heather N (Thesis advisor) / Chawla, Nikhilesh (Committee member) / Jiao, Yang (Committee member) / Pradhan, Shankali (Committee member) / Oka, Sarang (Committee member) / Arizona State University (Publisher)
Created2020
Description
Mixed-ionic electronic conducting (MIEC) oxides have drawn much attention from researchers because of their potential in high temperature separation processes. Among many materials available, perovskite type and fluorite type oxides are the most studied for their excellent oxygen ion transport property. These oxides not only can be oxygen adsorbent or O2-permeable membranes themselves, but also can be incorporated with molten carbonate to form dual-phase membranes for CO2 separation.
Oxygen sorption/desorption properties of perovskite oxides with and without oxygen vacancy were investigated first by thermogravimetric analysis (TGA) and fixed-bed experiments. The oxide with unique disorder-order phase transition during desorption exhibited an enhanced oxygen desorption rate during the TGA measurement but not in fixed-bed demonstrations. The difference in oxygen desorption rate is due to much higher oxygen partial pressure surrounding the sorbent during the fixed-bed oxygen desorption process, as revealed by X-ray diffraction (XRD) patterns of rapidly quenched samples.
Research on using perovskite oxides as CO2-permeable dual-phase membranes was subsequently conducted. Two CO2-resistant MIEC perovskite ceramics, Pr0.6Sr0.4Co0.2Fe0.8 O3-δ (PSCF) and SrFe0.9Ta0.1O3-δ (SFT) were chosen as support materials for membrane synthesis. PSCF-molten carbonate (MC) and SFT-MC membranes were prepared for CO2-O2 counter-permeation. The geometric factors for the carbonate phase and ceramic phase were used to calculate the effective carbonate and oxygen ionic conductivity in the carbonate and ceramic phase. When tested in CO2-O2 counter-permeation set-up, CO2 flux showed negligible change, but O2 flux decreased by 10-32% compared with single-component permeation. With CO2 counter-permeation, the total oxygen permeation flux is higher than that without counter-permeation.
A new concept of CO2-permselective membrane reactor for hydrogen production via steam reforming of methane (SRM) was demonstrated. The results of SRM in the membrane reactor confirm that in-situ CO2 removal effectively promotes water-gas shift conversion and thus enhances hydrogen yield. A modeling study was also conducted to assess the performance of the membrane reactor in high-pressure feed/vacuum sweep conditions, which were not carried out due to limitations in current membrane testing set-up. When 5 atm feed pressure and 10-3 atm sweep pressure were applied, the membrane reactor can produce over 99% hydrogen stream in simulation.
Oxygen sorption/desorption properties of perovskite oxides with and without oxygen vacancy were investigated first by thermogravimetric analysis (TGA) and fixed-bed experiments. The oxide with unique disorder-order phase transition during desorption exhibited an enhanced oxygen desorption rate during the TGA measurement but not in fixed-bed demonstrations. The difference in oxygen desorption rate is due to much higher oxygen partial pressure surrounding the sorbent during the fixed-bed oxygen desorption process, as revealed by X-ray diffraction (XRD) patterns of rapidly quenched samples.
Research on using perovskite oxides as CO2-permeable dual-phase membranes was subsequently conducted. Two CO2-resistant MIEC perovskite ceramics, Pr0.6Sr0.4Co0.2Fe0.8 O3-δ (PSCF) and SrFe0.9Ta0.1O3-δ (SFT) were chosen as support materials for membrane synthesis. PSCF-molten carbonate (MC) and SFT-MC membranes were prepared for CO2-O2 counter-permeation. The geometric factors for the carbonate phase and ceramic phase were used to calculate the effective carbonate and oxygen ionic conductivity in the carbonate and ceramic phase. When tested in CO2-O2 counter-permeation set-up, CO2 flux showed negligible change, but O2 flux decreased by 10-32% compared with single-component permeation. With CO2 counter-permeation, the total oxygen permeation flux is higher than that without counter-permeation.
A new concept of CO2-permselective membrane reactor for hydrogen production via steam reforming of methane (SRM) was demonstrated. The results of SRM in the membrane reactor confirm that in-situ CO2 removal effectively promotes water-gas shift conversion and thus enhances hydrogen yield. A modeling study was also conducted to assess the performance of the membrane reactor in high-pressure feed/vacuum sweep conditions, which were not carried out due to limitations in current membrane testing set-up. When 5 atm feed pressure and 10-3 atm sweep pressure were applied, the membrane reactor can produce over 99% hydrogen stream in simulation.
ContributorsWu, Han-Chun (Author) / Lin, Jerry Y.S. (Thesis advisor) / Deng, Shuguang (Committee member) / Jiao, Yang (Committee member) / Emady, Heather (Committee member) / Muhich, Christopherq (Committee member) / Arizona State University (Publisher)
Created2020
Description
Physical vapor deposition (PVD) of phase-separating multicomponent alloy films generates a rich variety of unique self-organized nanoscale morphologies. However, an understanding of how the different material and process parameters influence the formation of these nanostructures is limited. My dissertation aims to bridge this gap by developing phase-field models that can predict an entire spectrum of nanostructures as a function of processing conditions and composition in multicomponent alloys under a set of material-specific constraints. Firstly, I developed a numerical model to simulate nanoscale phase separation in codeposited immiscible binary alloy films. An investigation on the influence of deposition rates, phase-fraction, and temperature, on the evolution of self-assembled nanostructures yielded many characteristic patterns, including well-known morphologies such as the lateral and vertical concentration modulations, as well as some previously undocumented variants. I also simulated phase-separation in ternary alloyed PVD films, and studied the influence of deposition rate and composition on the evolution of self-assembled nanostructures, and recorded many novel nanoscale morphologies. I then sought to understand the role of material properties such as elastic misfit due to lattice mismatch between phases, grain boundaries formed in polycrystalline films, and the interplay of interphase and surface boundaries at the film surface. To this end, I developed phase-field models of binary PVD film deposition that incorporated these constraints and studied their role in altering the temporal and spatial characteristics of the evolving morphologies. I also investigated the formation of surface hillocks and the role of surface and interfacial energies in their evolution. By studying the change in total free energy across the different deposition models, I established that, in addition to influencing the temporal and spatial characteristics of nanoscale structures in the films, this quantity is also responsible for driving morphological transitions as the rate of deposition is increased. Insights gained from this computational study will demonstrate the viability of these models in predicting experimentally observed morphologies and form a basis for understanding the various factors involved in driving phase-separation and morphological transitions. In addition, morphology maps will serve as templates for developing new pathways for morphology control in the manufacturing of PVD alloy films.
ContributorsRaghavan, Rahul (Author) / Ankit, Kumar (Thesis advisor) / Rajagopalan, Jagannathan (Committee member) / Mushongera, Leslie T (Committee member) / Arizona State University (Publisher)
Created2021
Description
How to effectively and accurately describe, character and quantify the microstructure of the heterogeneous material and its 4D evolution process with time suffered from external stimuli or provocations is very difficult and challenging, but it’s significant and crucial for its performance prediction, processing, optimization and design. The goal of this research is to overcome these challenges by developing a series of novel hierarchical statistical microstructure descriptors called “n-point polytope functions” which is as known as Pn functions to quantify heterogeneous material’s microstructure and creating Pn functions related quantification methods which are Omega Metric and Differential Omega Metric to analyze its 4D processing.In this dissertation, a series of powerful programming tools are used to demonstrate that Pn functions can be used up to n=8 for chaotically scattered images which can hardly be distinguished by our naked eyes in chapter 3 to find or compare the potential configuration feature of structure such as symmetry or polygon geometry relation between the different targets when target’s multi-modal imaging is provided. These n-point statistic results calculated from Pn functions for features of interest in the microstructure can efficiently decompose the structural hidden features into a set of “polytope basis” to provide a concise, explainable, expressive, universal and efficient quantifying manner.
In Chapter 4, the Pn functions can also be incorporated into material reconstruction algorithms readily for fast virtualizing 3D microstructure regeneration and also allowing instant material property prediction via analytical structure-property mappings for material design.
In Chapter 5, Omega Metric and Differential Omega Metric are further created and used to provide a time-dependent reduced-dimension metric to analyze the 4D evaluation processing instead of using Pn functions directly because these 2 simplified methods can provide undistorted results to be easily compared. The real case of vapor-deposition alloy films analysis are implemented in this dissertation to demonstrate that One can use these methods to predict or optimize the design for 4D evolution of heterogeneous material.
The advantages of the all quantification methods in this dissertation can let us economically and efficiently quantify, design, predict the microstructure and 4D evolution of the heterogeneous material in various fields.
ContributorsCHEN, PEI-EN (Author) / Jiao, Yang (Thesis advisor) / Ren, Yi (Thesis advisor) / Liu, Yongming (Committee member) / Zhuang, Houlong (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2021
Description
The way a granular material is transported and handled plays a huge part in the quality of final product and the overall efficiency of the manufacturing process. Currently, there is a gap in the understanding of the basic relationship between the fundamental variables of granular materials such as moisture content, particle shape and size. This can lead to flowability issues like arching and ratholing, which can lead to unexpected downtimes in the whole manufacturing process and considerable wastage of time, energy, and resources. This study specifically focuses on the development of a model based on the surface mean diameter and the moisture content to predict the flow metric flow function coefficient (FFC) to describe the nature of flow of the material. The investigation involved three parts. The first entailed the characterization of the test materials with respect to their physical properties - density, size, and shape distributions. In the second, flowability tests were conducted with the FT4 Powder Rheometer. Shear cell tests were utilized to calculate each test specimen's flow function parameters. Finally, the physical properties were correlated with the results from the flowability tests to develop a reliable model to predict the nature of flow of the test specimens. The model displayed an average error of -6.5%. Predicted values showed great correlation with values obtained from further shear cell tests on the FT4 Rheometer. Additionally, particle shape factors and other flowability descriptors like Carr Index and Hausner Ratio were also evaluated for the sample materials. All size ranges displayed a decreasing trend in the values of Carr Index, Hausner Ratio, and FFC with increasing moisture percentages except the 5-11 micron glass beads, which showed an increasing trend in FFC. The results from this investigation could be helpful in designing equipment for powder handling and avoiding potential flowability issues.
ContributorsDeb, Anindya (Author) / Emady, Heather (Thesis advisor) / Marvi, Hamidreza (Committee member) / Jiao, Yang (Committee member) / Arizona State University (Publisher)
Created2021