Matching Items (14)
Filtering by
- Creators: Barrett, The Honors College
- Creators: Rittmann, Bruce
Improving cyanobacterial hydrogen production through bioprospecting of natural microbial communities
Description
Some cyanobacteria can generate hydrogen (H2) under certain physiological conditions and are considered potential agents for biohydrogen production. However, they also present low amounts of H2 production, a reaction reversal towards H2 consumption, and O2 sensitivity. Most attempts to improve H2 production have involved genetic or metabolic engineering approaches. I used a bio-prospecting approach instead to find novel strains that are naturally more apt for biohydrogen production. A set of 36, phylogenetically diverse strains isolated from terrestrial, freshwater and marine environments were probed for their potential to produce H2 from excess reductant. Two distinct patterns in H2 production were detected. Strains displaying Pattern 1, as previously known from Synechocystis sp. PCC 6803, produced H2 only temporarily, reverting to H2 consumption within a short time and after reaching only moderately high H2 concentrations. By contrast, Pattern 2 cyanobacteria, in the genera Lyngbya and Microcoleus, displayed high production rates, did not reverse the direction of the reaction and reached much higher steady-state H2 concentrations. L. aestuarii BL J, an isolate from marine intertidal mats, had the fastest production rates and reached the highest steady-state concentrations, 15-fold higher than that observed in Synechocystis sp. PCC 6803. Because all Pattern 2 strains originated in intertidal microbial mats that become anoxic in dark, it was hypothesized that their strong hydrogenogenic capacity may have evolved to aid in fermentation of the photosynthate. When forced to ferment, these cyanobacteria display similarly desirable characteristics of physiological H2 production. Again, L. aestuarii BL J had the fastest specific rates and attained the highest H2 concentrations during fermentation, which proceeded via a mixed-acid pathway to yield acetate, ethanol, lactate, H2, CO2 and pyruvate. The genome of L. aestuarii BL J was sequenced and bioinformatically compared to other cyanobacterial genomes to ascertain any potential genetic or structural basis for powerful H2 production. The association hcp exclusively in Pattern 2 strains suggests its possible role in increased H2 production. This study demonstrates the value of bioprospecting approaches to biotechnology, pointing to the strain L. aestuarii BL J as a source of useful genetic information or as a potential platform for biohydrogen production.
ContributorsKothari, Ankita (Author) / Garcia-Pichel, Ferran (Thesis advisor) / Vermaas, Willem F J (Committee member) / Rittmann, Bruce (Committee member) / Torres, Cesar (Committee member) / Arizona State University (Publisher)
Created2013
Description
This thesis focused on the development of a system that can sense light intensity and then control a smart film to provide the optimal light intensity for cyanobacteria. The overarching goal of this project is to further the study of biofuels as an alternative energy source by increasing growth rates. If more algae or cyanobacteria can be grown per day, then the cost to produce the biofuel will decrease. To achieve this goal, PDLC (polymer dispersed liquid crystal) film was selected to be controlled due to its unique properties. It can be controlled with electricity and has variable states, in other words, not restricted to simply on or off. It also blocks 80% ultraviolet light and reduces thermal heat gain by 40% which is an important consideration for outdoor growing situations. To control the film, a simple control system was created using an Arduino Uno, SainSmart 8 channel relay board, an inverter, and a power supply. A relay board was utilized to manage the 40 volts required by the PDLC film and protected the electronics on the Arduino Uno. To sense the light intensity, the Arduino Uno was connected to a photoresistor, which changes resistance with light intensity. A 15 day test of two flasks of Cyanobacteria Synechocycstis sp. 6803, one shaded by the PDLC film, and the other unshaded, yielded 65% difference in optical densities. Overall, the experiment showed promise for controlling light intensity for photobioreactors. Ideally, this research will help to optimize light intensities when growing cyanobacteria or algae outdoors or it will help to discover what an ideal light intensity is by allowing a researcher unprecedented control.
ContributorsRoney, Kitt Alicia (Author) / Nielsen, David (Thesis director) / Middleton, James (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2015-05
Description
The production of sustainable biochemicals has been a major topic of discussion in recent years. Using microbial cells for their production through genetic engineering has been a major topic of research. Cyanobacteria have been considered as a viable candidate for such production. However, the slow growth rate of the cells presents a challenge for the possibility of scaling for use in industrial settings. This project focuses on two different solutions for this problem. The first is using four different engineered strains of Synechocystis sp. PCC 6803 that overexpress the proteins in the b6f complex to improve photosynthetic efficiency. It was found that the strains PetB and PetD showed an increase in growth rate compared to wild type cells. This was especially true under mixotrophic conditions and with a light intensity of 100 µmol photons*m-2s-1 for 3 days. The second solution is by using a newly discovered marine strain of cyanobacteria, Synechococcus sp. PCC 11901, which has a higher reported growth rate. Higher growth rates were achieved for this strain when it was grown mixotrophically with glycerol, and when grown in bubble cultures with aeration.
ContributorsWinsor, Kira Varga (Author) / Varman, Arul Mohzy (Thesis director) / Vermaas, Wim (Committee member) / School of International Letters and Cultures (Contributor) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
Measuring changes in concentration within a dynamic system can be accomplished with a simple Arduino powered system. Currently, the system is utilized in cyanobacteria CO2 fixation experiments, where the fixation rates of multiple cultures can be measured simultaneously. The system employs solenoids in parallel and can be applied for n number of outlet streams, all are connected to one large manifold which feeds to a CO2 concentration probe. In the future, the system can be modified to fit other simple dynamic gas systems.
ContributorsInnes, Sean (Author) / Nielsen, David (Thesis director) / Jones, Christopher (Committee member) / Barrett, The Honors College (Contributor)
Created2021-12
Description
The changes in marine ecological conditions brought on by warming and stratification of the oceans have radically shifted many marine environments around the globe. This project aimed to better characterize the aggregation behavior of the abundant picocyanobacterium Prochlorococcus marinus, which is hypothesized to dominate over other phytoplankton as the primary autotroph in increasingly warmer and nutrient poor oceans. This aggregation, believed to be mediated through the secretion of sticky Transparent Exopolymeric Substances (TEP), might be key for Prochlorococcus to sink throughout the ocean and serve as a source of carbon to other communities within its environment. Considering the relatively low concentration of TEP secreted by Prochlorococcus when on its own, this study explored the synergistic effect that heterotrophic bacteria and inorganic minerals in the surrounding seawater may have on the aggregation of P. marinus. This was done by inoculating P. marinus and the model heterotroph Marinobacter adhaerens HP15 individually and mixed in cylindrical roller tanks with the addition of ballasting clay minerals into roller tanks to simulate constant sinking for 7 days. The aggregates which formed after rolling were quantified and their sinking velocities and excess densities were measured. Our results indicate that the most numerous and densest aggregates formed when Prochlorococcus was in the presence of both M. adhaerens and kaolinite clay particles. I will discuss how methodology, particularly cell number, may play a role in the enhanced aggregation that I found when Prochlorococcus was cultured together with the Marinobacter.
ContributorsAouad, Samer Ghassan (Author) / Neuer, Susanne (Thesis director) / Cadillo-Quiroz, Hinsby (Committee member) / Cruz, Bianca (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Traditional methods of genetic engineering are often limited to relatively few rounds of gene additions, deletions, or alterations due to a lack of additional available antibiotic resistance markers. Counter-selection marker methods can be used to remove and reuse marker genes as desired, resulting in markerless engineered strains and allowing for theoretically unlimited rounds of genetic modifications. The development of suitable counter-selection markers is vital for the development of model organisms such as cyanobacteria as biotechnological platforms.
In the hopes of providing other researchers with a new tool for markerless genetic engineering of cyanobacteria, the toxin MazF from E. coli was developed as a counter-selection marker in the most widely used cyanobacterium, Synechocystis sp. PCC 6803. The mazF gene from E. coli was cloned and inserted into a plasmid vector for downstream transformation of Synechocystis. The plasmid construct also contained two homologous flanking regions for integration of the insert into the Synechocystis genome, a nickel-inducible response regulator and promoter to control MazF expression, and a kanamycin resistance gene to serve as the antibiotic marker. In order to ensure the mazF plasmids could be cloned in a MazF-sensitive E. coli host even with slight promoter leakage, MazF expression was toned down by decreasing the efficiency of translation initiation by inserting base pairs between the ribosome binding site and the start codon of the mazF gene. Following successful cloning by E. coli, the mazF plasmids were then used to transform Synechocystis to create mazF mutant strains. Genomic analysis confirmed the successful transformation and segregation of mazF mutant strains containing the desired marker cassette. Phenotypic analysis revealed both growth arrest and production of mazF transcripts in mazF mutant strains following the addition of nickel to the cell cultures, indicating successful nickel-induced MazF expression as desired.
In the hopes of providing other researchers with a new tool for markerless genetic engineering of cyanobacteria, the toxin MazF from E. coli was developed as a counter-selection marker in the most widely used cyanobacterium, Synechocystis sp. PCC 6803. The mazF gene from E. coli was cloned and inserted into a plasmid vector for downstream transformation of Synechocystis. The plasmid construct also contained two homologous flanking regions for integration of the insert into the Synechocystis genome, a nickel-inducible response regulator and promoter to control MazF expression, and a kanamycin resistance gene to serve as the antibiotic marker. In order to ensure the mazF plasmids could be cloned in a MazF-sensitive E. coli host even with slight promoter leakage, MazF expression was toned down by decreasing the efficiency of translation initiation by inserting base pairs between the ribosome binding site and the start codon of the mazF gene. Following successful cloning by E. coli, the mazF plasmids were then used to transform Synechocystis to create mazF mutant strains. Genomic analysis confirmed the successful transformation and segregation of mazF mutant strains containing the desired marker cassette. Phenotypic analysis revealed both growth arrest and production of mazF transcripts in mazF mutant strains following the addition of nickel to the cell cultures, indicating successful nickel-induced MazF expression as desired.
ContributorsNewell, Phoebe Quynh (Co-author) / Newell, Phoebe (Co-author) / Vermaas, Willem (Thesis director) / Wang, Xuan (Committee member) / Li, Shuqin (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Prochlorococcus marinus (MED4), a genus of marine picocyanobacteria that proliferates in open oligotrophic ocean, is one of the most abundant photosynthetic microbes in the world, estimated to contribute up to 10% of the ocean’s primary production. The productivity of these microorganisms is controlled by macronutrient availability in the surface waters. The ratio of macronutrients in the ocean was defined, by Alfred Redfield, as an elemental ratio of 106C:16N:1P. However, the C:N:P ratio varies based on region, season, temperature and irradiance, as well as the composition of the primary producers. In oligotrophic gyres, these nutrient ratios are elevated from the Redfield stoichiometry, but whether this ratio exerts influence on the growth rate of the organism has not been investigated. Elemental stoichiometry of available nutrients can affect the aggregation of organic carbon and exportation of the particles to the ocean depths. The purpose of this study was to investigate the effects of nutrient limitation on aggregation and transparent exopolymeric particle (TEP) production which aids in aggregation. My findings suggested that nutrient limitation reduces TEP production and does not increase aggregate volume concentration. With continued warming, certain regions of the ocean will become more oligotrophic, which further decreases the nutrient supply available for Prochlorococcus. My research shows that this could lead to decreased exportation of organic carbon matter to the depths of the sea.
ContributorsRoy, Kevin Thomas (Author) / Neuer, Susanne (Thesis director) / Cadillo-Quiroz, Hinsby (Committee member) / Cruz, Bianca (Committee member) / Department of Psychology (Contributor) / School of Molecular Sciences (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Cyanobacteria have the potential to efficiently produce L-serine, an industrially important amino acid, directly from CO2 and sunlight, which is a more sustainable and inexpensive source of energy as compared to current methods. The research aims to engineer a strain of Cyanobacterium Synechococcus sp. PCC 7002 that increases L-serine production by mutating regulatory mechanisms that natively inhibit its production and encoding an exporter. While an excess of L-serine was not found in the supernatant of the cell cultures, with further fine tuning of the metabolic pathway and culture conditions, high titers of L-serine can be found. With the base strain engineered, the work can be extended and optimized by deleting degradation pathways, tuning gene expression levels, optimizing growth conditions, and investigating the effects of nitrogen supplementation for the strain.
ContributorsAbed, Omar (Author) / Nielsen, David (Thesis director) / Jones, Christopher (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Increasing energy and environmental problems describe the need to develop renewable chemicals and fuels. Global research has been targeting using microbial systems on a commercial scale for synthesis of valuable compounds. The goal of this project was to refactor and overexpress b6-f complex proteins in cyanobacteria to improve photosynthesis under dynamic light conditions. Improvement in the photosynthetic system can directly relate to higher yields of valuable compounds such as carotenoids and higher yields of biomass which can be used as energy molecules. Four engineered strains of cyanobacteria were successfully constructed and overexpressed the corresponding four large subunits in the cytochrome b6-f complex. No significant changes were found in cell growth or pigment titer in the modified strains compared to the wild type. The growth assay will be performed at higher and/or dynamic light intensities including natural light conditions for further analysis.
ContributorsNauroth, Benjamin (Author) / Varman, Arul (Thesis director) / Singharoy, Abhishek (Committee member) / Li, Han (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
To efficiently produce biofuels and meet the planet’s rising energy demands, different biofuel production methods need to be developed and improved. One of the ways is to produce fatty acid methyl esters (FAMEs) in Synechocystis sp. PCC 6803, a versatile strain of cyanobacteria. In this thesis, Synechocystis was engineered to produce and excrete methyl laurate. In this pathway, first, lauroyl-ACP from fatty acid biosynthesis is converted to laurate by a thioesterase (TE) from Umbellularia californica. Then, the laurate is methylated to methyl laurate by a juvenile hormone acid O-methyltransferase (DmJHAMT) from Drosophila melanogaster. The TE/∆slr1609 strain of Synechocystis sp. PCC 6803 contains the TE gene and lacks the slr1609 gene encoding an acyl–acyl carrier protein synthetase, which functions in free fatty acid reuptake. The DmJHAMT gene was introduced into this strain for FAME production.
The DmJHAMT gene was cloned into a vector that contains neutral sites from the Synechocystis genome, making it suitable for homologous recombination, and a kanamycin resistance gene, for selection. The obtained plasmid was verified using restriction digests and Sanger sequencing. The sequence analysis and comparison of the cDNA in the obtained plasmid and the mRNA transcript of the same gene revealed three amino acid differences. Subsequent comparison with homologous genes in other Drosophila species revealed the differences in the cDNA match those of the other species, and thus, the gene most likely is functional.
The plasmid was transformed into Synechocystis, and PCRs were used to confirm proper integration and segregation. The TE/∆slr1609/DmJHAMT strain produced 62 mg/L methyl laurate in 12 days under a light intensity of 150 µmol photons m-2 s-1, bubbled with 0.5% CO2 at a rate of 30 mL/min, and supplemented with 0.5 mM methionine. The laurate levels did not decrease over time, but instead, remained stagnant after day 3. When the strain was grown in the same conditions without methionine, the laurate concentrations continued to increase above 400 µM, suggesting minimal methyl laurate production and thus a strong need for methionine supplementation. This work provides further evidence of the viability and success of the introduced FAME production pathway, and improved efficiency may be gained in the future.
The DmJHAMT gene was cloned into a vector that contains neutral sites from the Synechocystis genome, making it suitable for homologous recombination, and a kanamycin resistance gene, for selection. The obtained plasmid was verified using restriction digests and Sanger sequencing. The sequence analysis and comparison of the cDNA in the obtained plasmid and the mRNA transcript of the same gene revealed three amino acid differences. Subsequent comparison with homologous genes in other Drosophila species revealed the differences in the cDNA match those of the other species, and thus, the gene most likely is functional.
The plasmid was transformed into Synechocystis, and PCRs were used to confirm proper integration and segregation. The TE/∆slr1609/DmJHAMT strain produced 62 mg/L methyl laurate in 12 days under a light intensity of 150 µmol photons m-2 s-1, bubbled with 0.5% CO2 at a rate of 30 mL/min, and supplemented with 0.5 mM methionine. The laurate levels did not decrease over time, but instead, remained stagnant after day 3. When the strain was grown in the same conditions without methionine, the laurate concentrations continued to increase above 400 µM, suggesting minimal methyl laurate production and thus a strong need for methionine supplementation. This work provides further evidence of the viability and success of the introduced FAME production pathway, and improved efficiency may be gained in the future.
ContributorsSharma, Shuchi (Author) / Vermaas, Willem (Thesis director) / Wang, Xuan (Committee member) / Li, Shuqin (Committee member) / Computer Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05