Matching Items (142)
Filtering by
- Creators: Barrett, The Honors College
Description
We consider programmable matter as a collection of simple computational elements (or particles) that self-organize to solve system-wide problems of movement, configuration, and coordination. Here, we focus on the compression problem, in which the particle system gathers as tightly together as possible, as in a sphere or its equivalent in the presence of some underlying geometry. Within this model a configuration of particles can be represented as a unique closed self-avoiding walk on the triangular lattice. In this paper we will examine the bias parameter of a Markov chain based algorithm that solves the compression problem under the geometric amoebot model, for particle systems that begin in a connected configuration with no holes. This bias parameter, $\lambda$, determines the behavior of the algorithm. It has been shown that for $\lambda > 2+\sqrt{2}$, with all but exponentially small probability, the algorithm achieves compression. Additionally the same algorithm can be used for expansion for small values of $\lambda$; in particular, for all $0 < \lambda < \sqrt{\tau}$, where $\lim_{n\to\infty} {(p_n)^{1
}}=\tau$. This research will focus on improving approximations on the lower bound of $\tau$. Toward this end we will examine algorithmic enumeration, and series analysis for self-avoiding polygons.
}}=\tau$. This research will focus on improving approximations on the lower bound of $\tau$. Toward this end we will examine algorithmic enumeration, and series analysis for self-avoiding polygons.
ContributorsLough, Kevin James (Author) / Richa, Andrea (Thesis director) / Fishel, Susanna (Committee member) / School of Mathematical and Statistical Sciences (Contributor, Contributor) / Computer Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
A defense-by-randomization framework is proposed as an effective defense mechanism against different types of adversarial attacks on neural networks. Experiments were conducted by selecting a combination of differently constructed image classification neural networks to observe which combinations applied to this framework were most effective in maximizing classification accuracy. Furthermore, the reasons why particular combinations were more effective than others is explored.
ContributorsMazboudi, Yassine Ahmad (Author) / Yang, Yezhou (Thesis director) / Ren, Yi (Committee member) / School of Mathematical and Statistical Sciences (Contributor) / Economics Program in CLAS (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Non-Destructive Testing (NDT) is integral to preserving the structural health of materials. Techniques that fall under the NDT category are able to evaluate integrity and condition of a material without permanently altering any property of the material. Additionally, they can typically be used while the material is in active use instead of needing downtime for inspection.
The two general categories of structural health monitoring (SHM) systems include passive and active monitoring. Active SHM systems utilize an input of energy to monitor the health of a structure (such as sound waves in ultrasonics), while passive systems do not. As such, passive SHM tends to be more desirable. A system could be permanently fixed to a critical location, passively accepting signals until it records a damage event, then localize and characterize the damage. This is the goal of acoustic emissions testing.
When certain types of damage occur, such as matrix cracking or delamination in composites, the corresponding release of energy creates sound waves, or acoustic emissions, that propagate through the material. Audio sensors fixed to the surface can pick up data from both the time and frequency domains of the wave. With proper data analysis, a time of arrival (TOA) can be calculated for each sensor allowing for localization of the damage event. The frequency data can be used to characterize the damage.
In traditional acoustic emissions testing, the TOA combined with wave velocity and information about signal attenuation in the material is used to localize events. However, in instances of complex geometries or anisotropic materials (such as carbon fibre composites), velocity and attenuation can vary wildly based on the direction of interest. In these cases, localization can be based off of the time of arrival distances for each sensor pair. This technique is called Delta T mapping, and is the main focus of this study.
The two general categories of structural health monitoring (SHM) systems include passive and active monitoring. Active SHM systems utilize an input of energy to monitor the health of a structure (such as sound waves in ultrasonics), while passive systems do not. As such, passive SHM tends to be more desirable. A system could be permanently fixed to a critical location, passively accepting signals until it records a damage event, then localize and characterize the damage. This is the goal of acoustic emissions testing.
When certain types of damage occur, such as matrix cracking or delamination in composites, the corresponding release of energy creates sound waves, or acoustic emissions, that propagate through the material. Audio sensors fixed to the surface can pick up data from both the time and frequency domains of the wave. With proper data analysis, a time of arrival (TOA) can be calculated for each sensor allowing for localization of the damage event. The frequency data can be used to characterize the damage.
In traditional acoustic emissions testing, the TOA combined with wave velocity and information about signal attenuation in the material is used to localize events. However, in instances of complex geometries or anisotropic materials (such as carbon fibre composites), velocity and attenuation can vary wildly based on the direction of interest. In these cases, localization can be based off of the time of arrival distances for each sensor pair. This technique is called Delta T mapping, and is the main focus of this study.
ContributorsBriggs, Nathaniel (Author) / Chattopadhyay, Aditi (Thesis director) / Papandreou-Suppappola, Antonia (Committee member) / Skinner, Travis (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Karate is a Japanese martial art that originated approximately a century ago, with heavy influence from Chinese martial arts at the time. Although it was originally created as a form of self-defense, many today practice it for sport. Organizations such as the World Karate Federation (WKF) and USA Karate establish rules for competitions as well as host tournaments for practitioners of all ages and skill levels to participate in. Dojos will often host small, local tournaments for their students to practice and sharpen their competition skills. Smaller tournaments often do not have the same tools and technologies that larger tournaments do. Sign-ups are typically done in-person and payments are cash-only, which can be inconvenient for those who are extremely busy or forgetful. Another issue with hosting local tournaments is that the software used to run the timer is a desktop application, called Karate Semaphore. In the case of technical difficulties, installing the software on another machine can be extremely time-consuming and delay the progression of the tournament. Not to mention, Karate Semaphore was created following the 2012 WKF rules—meaning it is currently out of date, as it does not contain any features supporting new rules.
For my creative project, I designed a website through which smaller, local tournament registration and management are possible. Users can register for tournaments through the registration page. Registered users can check their registration is successful by viewing a table of all competitors. If the list of competitors is too long, they can filter results based on search criteria. Tournament management will be possible via a functioning timer following WKF rules which keeps track of both the match’s score as well as time.
For my creative project, I designed a website through which smaller, local tournament registration and management are possible. Users can register for tournaments through the registration page. Registered users can check their registration is successful by viewing a table of all competitors. If the list of competitors is too long, they can filter results based on search criteria. Tournament management will be possible via a functioning timer following WKF rules which keeps track of both the match’s score as well as time.
ContributorsRuan, Shirley (Author) / Sarwat, Mohamed (Thesis director) / Chen, Yinong (Committee member) / Computer Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
In materials science, developing GeSn alloys is major current research interest concerning the production of efficient Group-IV photonics. These alloys are particularly interesting because the development of next-generation semiconductors for ultrafast (terahertz) optoelectronic communication devices could be accomplished through integrating these novel alloys with industry-standard silicon technology. Unfortunately, incorporating a maximal amount of Sn into a Ge lattice has been difficult to achieve experimentally. At ambient conditions, pure Ge and Sn adopt cubic (α) and tetragonal (β) structures, respectively, however, to date the relative stability and structure of α and β phase GeSn alloys versus percent composition Sn has not been thoroughly studied. In this research project, computational tools were used to perform state-of-the-art predictive quantum simulations to study the structural, bonding and energetic trends in GeSn alloys in detail over a range of experimentally accessible compositions. Since recent X-Ray and vibrational studies have raised some controversy about the nanostructure of GeSn alloys, the investigation was conducted with ordered, random and clustered alloy models.
By means of optimized geometry analysis, pure Ge and Sn were found to adopt the alpha and beta structures, respectively, as observed experimentally. For all theoretical alloys, the corresponding αphase structure was found to have the lowest energy, for Sn percent compositions up to 90%. However at 50% Sn, the correspondingβ alloy energies are predicted to be only ~70 meV higher. The formation energy of α-phase alloys was found to be positive for all compositions, whereas only two beta formation energies were negative. Bond length distributions were analyzed and dependence on Sn incorporation was found, perhaps surprisingly, not to be directly correlated with cell volume. It is anticipated that the data collected in this project may help to elucidate observed complex vibrational properties in these systems.
By means of optimized geometry analysis, pure Ge and Sn were found to adopt the alpha and beta structures, respectively, as observed experimentally. For all theoretical alloys, the corresponding αphase structure was found to have the lowest energy, for Sn percent compositions up to 90%. However at 50% Sn, the correspondingβ alloy energies are predicted to be only ~70 meV higher. The formation energy of α-phase alloys was found to be positive for all compositions, whereas only two beta formation energies were negative. Bond length distributions were analyzed and dependence on Sn incorporation was found, perhaps surprisingly, not to be directly correlated with cell volume. It is anticipated that the data collected in this project may help to elucidate observed complex vibrational properties in these systems.
ContributorsLiberman-Martin, Zoe Elise (Author) / Chizmeshya, Andrew (Thesis director) / Sayres, Scott (Committee member) / Wolf, George (Committee member) / School of Mathematical and Statistical Sciences (Contributor) / School of Molecular Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Multi-view learning, a subfield of machine learning that aims to improve model performance by training on multiple views of the data, has been studied extensively in the past decades. It is typically applied in contexts where the input features naturally form multiple groups or views. An example of a naturally multi-view context is a data set of websites, where each website is described not only by the text on the page, but also by the text of hyperlinks pointing to the page. More recently, various studies have demonstrated the initial success of applying multi-view learning on single-view data with multiple artificially constructed views. However, there lacks a systematic study regarding the effectiveness of such artificially constructed views. To bridge this gap, this thesis begins by providing a high-level overview of multi-view learning with the co-training algorithm. Co-training is a classic semi-supervised learning algorithm that takes advantage of both labelled and unlabelled examples in the data set for training. Then, the thesis presents a web-based tool developed in Python allowing users to experiment with and compare the performance of multiple view construction approaches on various data sets. The supported view construction approaches in the web-based tool include subsampling, Optimal Feature Set Partitioning, and the genetic algorithm. Finally, the thesis presents an empirical comparison of the performance of these approaches, not only against one another, but also against traditional single-view models. The findings show that a simple subsampling approach combined with co-training often outperforms both the other view construction approaches, as well as traditional single-view methods.
ContributorsAksoy, Kaan (Author) / Maciejewski, Ross (Thesis director) / He, Jingrui (Committee member) / Computer Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-12
Description
As Big Data becomes more relevant, existing grouping and clustering algorithms will need to be evaluated for their effectiveness with large amounts of data. Previous work in Similarity Grouping proposes a possible alternative to existing data analytics tools, which acts as a hybrid between fast grouping and insightful clustering. We, the SimCloud Team, proposed Distributed Similarity Group-by (DSG), a distributed implementation of Similarity Group By. Experimental results show that DSG is effective at generating meaningful clusters and has a lower runtime than K-Means, a commonly used clustering algorithm. This document presents my personal contributions to this team effort. The contributions include the multi-dimensional synthetic data generator, execution of the Increasing Scale Factor experiment, and presentations at the NCURIE Symposium and the SISAP 2019 Conference.
ContributorsWallace, Xavier Guillermo (Author) / Silva, Yasin (Thesis director) / Kuai, Xu (Committee member) / School for the Future of Innovation in Society (Contributor) / School of Mathematical and Natural Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2019-12
Description
This study aims to examine how the use of consensus-based transactions, smart contracts,and interoperability, provided by blockchain, may benefit the blood plasma industry. Plasmafractionation is the process of separating blood into multiple components to garner benefitsof increased lifespan, specialized allocation, and decreased waste, thereby creating a morecomplex and flexible supply chain. Traditional applications of blockchain are developed onthe basis of decentralization—an infeasible policy for this sector due to stringent governmentregulations, such as HIPAA. However, the trusted nature of the relations in the plasmaindustry’s taxonomy proves private and centralized blockchains as the viable alternative.Implementations of blockchain are widely seen across pharmaceutical supply chains to combatthe falsification of possibly afflictive drugs. This system is more difficult to manage withblood, due to the quick perishable time, tracking/tracing of recycled components, and thenecessity of real-time metrics. Key attributes of private blockchains, such as digital identity,smart contracts, and authorized ledgers, may have the possibility of providing a significantpositive impact on the allocation and management functions of blood banks. Herein, we willidentify the economy and risks of the plasma ecosystem to extrapolate specific applications forthe use of blockchain technology. To understand tangible effects of blockchain, we developeda proof of concept application, aiming to emulate the business logic of modern plasma supplychain ecosystems adopting a blockchain data structure. The application testing simulates thesupply chain via agent-based modeling to analyze the scalability, benefits, and limitations ofblockchain for the plasma fractionation industry.
ContributorsVallabhaneni, Saipavan K (Author) / Boscovic, Dragan (Thesis director) / Kellso, James (Committee member) / Department of Information Systems (Contributor) / Department of Supply Chain Management (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
With renewable energy on the rise, researchers have turned their funding and their focus towards new solar cell technologies, and perovskites are a major source of interest. This class of materials is particularly interesting due to their quick, simple synthesis as well as their physical and electrical superiority when compared to current silicon-based solar cells. Through this thesis, we will explore the synthesis of various types of perovskites and their subsequent characterization, which includes optical microscopy, photoluminescence spectroscopy, Raman microscopy, and X-ray diffraction. Analyzing two different perovskites both before and after a two-week period of storage revealed that while synthesis is indeed experiment-friendly, these materials have a concerning lack of stability even in ideal conditions.
ContributorsBuzas, Benjamin Joseph (Author) / Tongay, Sefaattin (Thesis director) / Muhich, Christopher (Committee member) / Materials Science and Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The original version of Helix, the one I pitched when first deciding to make a video game
for my thesis, is an action-platformer, with the intent of metroidvania-style progression
and an interconnected world map.
The current version of Helix is a turn based role-playing game, with the intent of roguelike
gameplay and a dark fantasy theme. We will first be exploring the challenges that came
with programming my own game - not quite from scratch, but also without a prebuilt
engine - then transition into game design and how Helix has evolved from its original form
to what we see today.
for my thesis, is an action-platformer, with the intent of metroidvania-style progression
and an interconnected world map.
The current version of Helix is a turn based role-playing game, with the intent of roguelike
gameplay and a dark fantasy theme. We will first be exploring the challenges that came
with programming my own game - not quite from scratch, but also without a prebuilt
engine - then transition into game design and how Helix has evolved from its original form
to what we see today.
ContributorsDiscipulo, Isaiah K (Author) / Meuth, Ryan (Thesis director) / Kobayashi, Yoshihiro (Committee member) / School of Mathematical and Statistical Sciences (Contributor) / Computer Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05