Matching Items (22)
Filtering by
- All Subjects: Computer Science
- Genre: Masters Thesis
- Creators: Shrivastava, Aviral
Description
In this thesis we deal with the problem of temporal logic robustness estimation. We present a dynamic programming algorithm for the robust estimation problem of Metric Temporal Logic (MTL) formulas regarding a finite trace of time stated sequence. This algorithm not only tests if the MTL specification is satisfied by the given input which is a finite system trajectory, but also quantifies to what extend does the sequence satisfies or violates the MTL specification. The implementation of the algorithm is the DP-TALIRO toolbox for MATLAB. Currently it is used as the temporal logic robust computing engine of S-TALIRO which is a tool for MATLAB searching for trajectories of minimal robustness in Simulink/ Stateflow. DP-TALIRO is expected to have near linear running time and constant memory requirement depending on the structure of the MTL formula. DP-TALIRO toolbox also integrates new features not supported in its ancestor FW-TALIRO such as parameter replacement, most related iteration and most related predicate. A derivative of DP-TALIRO which is DP-T-TALIRO is also addressed in this thesis which applies dynamic programming algorithm for time robustness computation. We test the running time of DP-TALIRO and compare it with FW-TALIRO. Finally, we present an application where DP-TALIRO is used as the robustness computation core of S-TALIRO for a parameter estimation problem.
ContributorsYang, Hengyi (Author) / Fainekos, Georgios (Thesis advisor) / Sarjoughian, Hessam S. (Committee member) / Shrivastava, Aviral (Committee member) / Arizona State University (Publisher)
Created2013
Description
Rapid technology scaling, the main driver of the power and performance improvements of computing solutions, has also rendered our computing systems extremely susceptible to transient errors called soft errors. Among the arsenal of techniques to protect computation from soft errors, Control Flow Checking (CFC) based techniques have gained a reputation of effective, yet low-cost protection mechanism. The basic idea is that, there is a high probability that a soft-fault in program execution will eventually alter the control flow of the program. Therefore just by making sure that the control flow of the program is correct, significant protection can be achieved. More than a dozen techniques for CFC have been developed over the last several decades, ranging from hardware techniques, software techniques, and hardware-software hybrid techniques as well. Our analysis shows that existing CFC techniques are not only ineffective in protecting from soft errors, but cause additional power and performance overheads. For this analysis, we develop and validate a simulation based experimental setup to accurately and quantitatively estimate the architectural vulnerability of a program execution on a processor micro-architecture. We model the protection achieved by various state-of-the-art CFC techniques in this quantitative vulnerability estimation setup, and find out that software only CFC protection schemes (CFCSS, CFCSS+NA, CEDA) increase system vulnerability by 18% to 21% with 17% to 38% performance overhead. Hybrid CFC protection (CFEDC) increases vulnerability by 5%, while the vulnerability remains almost the same for hardware only CFC protection (CFCET); notwithstanding the hardware overheads of design cost, area, and power incurred in the hardware modifications required for their implementations.
ContributorsRhisheekesan, Abhishek (Author) / Shrivastava, Aviral (Thesis advisor) / Colbourn, Charles Joseph (Committee member) / Wu, Carole-Jean (Committee member) / Arizona State University (Publisher)
Created2013
Description
Performance improvements have largely followed Moore's Law due to the help from technology scaling. In order to continue improving performance, power-efficiency must be reduced. Better technology has improved power-efficiency, but this has a limit. Multi-core architectures have been shown to be an additional aid to this crusade of increased power-efficiency. Accelerators are growing in popularity as the next means of achieving power-efficient performance. Accelerators such as Intel SSE are ideal, but prove difficult to program. FPGAs, on the other hand, are less efficient due to their fine-grained reconfigurability. A middle ground is found in CGRAs, which are highly power-efficient, but largely programmable accelerators. Power-efficiencies of 100s of GOPs/W have been estimated, more than 2 orders of magnitude greater than current processors. Currently, CGRAs are limited in their applicability due to their ability to only accelerate a single thread at a time. This limitation becomes especially apparent as multi-core/multi-threaded processors have moved into the mainstream. This limitation is removed by enabling multi-threading on CGRAs through a software-oriented approach. The key capability in this solution is enabling quick run-time transformation of schedules to execute on targeted portions of the CGRA. This allows the CGRA to be shared among multiple threads simultaneously. Analysis shows that enabling multi-threading has very small costs but provides very large benefits (less than 1% single-threaded performance loss but nearly 300% CGRA throughput increase). By increasing dynamism of CGRA scheduling, system performance is shown to increase overall system performance of an optimized system by almost 350% over that of a single-threaded CGRA and nearly 20x faster than the same system with no CGRA in a highly threaded environment.
ContributorsPager, Jared (Author) / Shrivastava, Aviral (Thesis advisor) / Gupta, Sandeep (Committee member) / Speyer, Gil (Committee member) / Arizona State University (Publisher)
Created2011
Description
Limited Local Memory (LLM) multicore architectures are promising powerefficient architectures will scalable memory hierarchy. In LLM multicores, each core can access only a small local memory. Accesses to a large shared global memory can only be made explicitly through Direct Memory Access (DMA) operations. Standard Template Library (STL) is a powerful programming tool and is widely used for software development. STLs provide dynamic data structures, algorithms, and iterators for vector, deque (double-ended queue), list, map (red-black tree), etc. Since the size of the local memory is limited in the cores of the LLM architecture, and data transfer is not automatically supported by hardware cache or OS, the usage of current STL implementation on LLM multicores is limited. Specifically, there is a hard limitation on the amount of data they can handle. In this article, we propose and implement a framework which manages the STL container classes on the local memory of LLM multicore architecture. Our proposal removes the data size limitation of the STL, and therefore improves the programmability on LLM multicore architectures with little change to the original program. Our implementation results in only about 12%-17% increase in static library code size and reasonable runtime overheads.
ContributorsLu, Di (Author) / Shrivastava, Aviral (Thesis advisor) / Chatha, Karamvir (Committee member) / Dasgupta, Partha (Committee member) / Arizona State University (Publisher)
Created2012
Description
The use of energy-harvesting in a wireless sensor network (WSN) is essential for situations where it is either difficult or not cost effective to access the network's nodes to replace the batteries. In this paper, the problems involved in controlling an active sensor network that is powered both by batteries and solar energy are investigated. The objective is to develop control strategies to maximize the quality of coverage (QoC), which is defined as the minimum number of targets that must be covered and reported over a 24 hour period. Assuming a time varying solar profile, the problem is to optimally control the sensing range of each sensor so as to maximize the QoC while maintaining connectivity throughout the network. Implicit in the solution is the dynamic allocation of solar energy during the day to sensing and to recharging the battery so that a minimum coverage is guaranteed even during the night, when only the batteries can supply energy to the sensors. This problem turns out to be a non-linear optimal control problem of high complexity. Based on novel and useful observations, a method is presented to solve it as a series of quasiconvex (unimodal) optimization problems which not only ensures a maximum QoC, but also maintains connectivity throughout the network. The runtime of the proposed solution is 60X less than a naive but optimal method which is based on dynamic programming, while the peak error of the solution is less than 8%. Unlike the dynamic programming method, the proposed method is scalable to large networks consisting of hundreds of sensors and targets. The solution method enables a designer to explore the optimal configuration of network design. This paper offers many insights in the design of energy-harvesting networks, which result in minimum network setup cost through determination of optimal configuration of number of sensors, sensing beam width, and the sampling time.
ContributorsGaudette, Benjamin (Author) / Vrudhula, Sarma (Thesis advisor) / Shrivastava, Aviral (Committee member) / Sen, Arunabha (Committee member) / Arizona State University (Publisher)
Created2012
Description
Reducing device dimensions, increasing transistor densities, and smaller timing windows, expose the vulnerability of processors to soft errors induced by charge carrying particles. Since these factors are inevitable in the advancement of processor technology, the industry has been forced to improve reliability on general purpose Chip Multiprocessors (CMPs). With the availability of increased hardware resources, redundancy based techniques are the most promising methods to eradicate soft error failures in CMP systems. This work proposes a novel customizable and redundant CMP architecture (UnSync) that utilizes hardware based detection mechanisms (most of which are readily available in the processor), to reduce overheads during error free executions. In the presence of errors (which are infrequent), the always forward execution enabled recovery mechanism provides for resilience in the system. The inherent nature of UnSync architecture framework supports customization of the redundancy, and thereby provides means to achieve possible performance-reliability trade-offs in many-core systems. This work designs a detailed RTL model of UnSync architecture and performs hardware synthesis to compare the hardware (power/area) overheads incurred. It then compares the same with those of the Reunion technique, a state-of-the-art redundant multi-core architecture. This work also performs cycle-accurate simulations over a wide range of SPEC2000, and MiBench benchmarks to evaluate the performance efficiency achieved over that of the Reunion architecture. Experimental results show that, UnSync architecture reduces power consumption by 34.5% and improves performance by up to 20% with 13.3% less area overhead, when compared to Reunion architecture for the same level of reliability achieved.
ContributorsHong, Fei (Author) / Shrivastava, Aviral (Thesis advisor) / Bazzi, Rida (Committee member) / Fainekos, Georgios (Committee member) / Arizona State University (Publisher)
Created2011
Description
The rapid growth of data generated from Internet of Things (IoTs) such as smart phones and smart home devices presents new challenges to cloud computing in transferring, storing, and processing the data. With increasingly more powerful edge devices, edge computing, on the other hand, has the potential to better responsiveness, privacy, and cost efficiency. However, resources across the cloud and edge are highly distributed and highly diverse. To address these challenges, this paper proposes EdgeFaaS, a Function-as-a-Service (FaaS) based computing framework that supports the flexible, convenient, and optimized use of distributed and heterogeneous resources across IoT, edge, and cloud systems. EdgeFaaS allows cluster resources and individual devices to be managed under the same framework and provide computational and storage resources for functions. It provides virtual function and virtual storage interfaces for consistent function management and storage management across heterogeneous compute and storage resources. It automatically optimizes the scheduling of functions and placement of data according to their performance and privacy requirements. EdgeFaaS is evaluated based on two edge workflows: video analytics workflow and federated learning workflow, both of which are representative edge applications and involve large amounts of input data generated from edge devices.
ContributorsJin, Runyu (Author) / Zhao, Ming (Thesis advisor) / Shrivastava, Aviral (Committee member) / Sarwat Abdelghany Aly Elsayed, Mohamed (Committee member) / Arizona State University (Publisher)
Created2021
Description
Pan Tilt Traffic Cameras (PTTC) are a vital component of traffic managementsystems for monitoring/surveillance. In a real world scenario, if a vehicle is in pursuit
of another vehicle or an accident has occurred at an intersection causing traffic
stoppages, accurate and venerable data from PTTC is necessary to quickly localize
the cars on a map for adept emergency response as more and more traffic systems are
getting automated using machine learning concepts. However, the position(orientation)
of the PTTC with respect to the environment is often unknown as most of them
lack Inertial Measurement Units or Encoders. Current State Of the Art systems 1.
Demand high performance compute and use carbon footprint heavy Deep Neural
Networks(DNN), 2. Are only applicable to scenarios with appropriate lane markings or
only roundabouts, 3. Demand complex mathematical computations to determine focal
length and optical center first before determining the pose. A compute light approach
"TIPANGLE" is presented in this work. The approach uses the concept of Siamese
Neural Networks(SNN) encompassing simple mathematical functions i.e., Euclidian
Distance and Contrastive Loss to achieve the objective. The effectiveness of the
approach is reckoned with a thorough comparison study with alternative approaches
and also by executing the approach on an embedded system i.e., Raspberry Pi 3.
ContributorsJagadeesha, Shreehari (Author) / Shrivastava, Aviral (Thesis advisor) / Gopalan, Nakul (Committee member) / Arora, Aman (Committee member) / Arizona State University (Publisher)
Created2023
Description
5G Millimeter Wave (mmWave) technology holds great promise for Connected Autonomous Vehicles (CAVs) due to its ability to achieve data rates in the Gbps range. However, mmWave suffers high beamforming overhead and requirement of line of sight (LOS) to maintain a strong connection. For Vehicle-to-Infrastructure (V2I) scenarios, where CAVs connect to roadside units (RSUs), these drawbacks become apparent. Because vehicles are dynamic, there is a large potential for link blockages, which in turn is detrimental to the connected applications running on the vehicle, such as cooperative perception and remote driver takeover. Existing RSU selection schemes base their decisions on signal strength and vehicle trajectory alone, which is not enough to prevent the blockage of links. Most recent CAVs motion planning algorithms routinely use other vehicle's near-future plans, either by explicit communication among vehicles, or by prediction. In this thesis, I make use of this knowledge (of the other vehicle's near future path plans) to further improve the RSU association mechanism for CAVs. I solve the RSU association problem by converting it to a shortest path problem with the objective to maximize the total communication bandwidth.
Evaluations of B-AWARE in simulation using Simulated Urban Mobility (SUMO) and Digital twin for self-dRiving Intelligent VEhicles (DRIVE) on 12 highway and city street scenarios with varying traffic density and RSU placements show that B-AWARE results in a 1.05x improvement of the potential datarate in the average case and 1.28x in the best case vs. the state of the art. But more impressively, B-AWARE reduces the time spent with no connection by 48% in the average case and 251% in the best case as compared to the state-of-the-art methods. This is partly a result of B-AWARE reducing almost 100% of blockage occurrences in simulation.
ContributorsSzeto, Matthew (Author) / Shrivastava, Aviral (Thesis advisor) / LiKamWa, Robert (Committee member) / Meuth, Ryan (Committee member) / Arizona State University (Publisher)
Created2023
Description
The Internet of Things ecosystem has spawned a wide variety of embedded real-time systems that complicate the identification and resolution of bugs in software. The methods of concurrent checkpoint provide a means to monitor the application state with the ability to replay the execution on like hardware and software, without holding off and delaying the execution of application threads. In this thesis, it is accomplished by monitoring physical memory of the application using a soft-dirty page tracker and measuring the various types of overhead when employing concurrent checkpointing. The solution presented is an advancement of the Checkpoint and Replay In Userspace (CRIU) thereby eliminating the large stalls and parasitic operation for each successive checkpoint. Impact and performance is measured using the Parsec 3.0 Benchmark suite and 4.11.12-rt16+ Linux kernel on a MinnowBoard Turbot Quad-Core board.
ContributorsPrinke, Michael L (Author) / Lee, Yann-Hang (Thesis advisor) / Shrivastava, Aviral (Committee member) / Zhao, Ming (Committee member) / Arizona State University (Publisher)
Created2018