Matching Items (8)
Filtering by
- All Subjects: Radar
- Genre: Masters Thesis
- Creators: Papandreou-Suppappola, Antonia
Description
Waveform design that allows for a wide variety of frequency-modulation (FM) has proven benefits. However, dictionary based optimization is limited and gradient search methods are often intractable. A new method is proposed using differential evolution to design waveforms with instantaneous frequencies (IFs) with cubic FM functions whose coefficients are constrained to the surface of the three dimensional unit sphere. Cubic IF functions subsume well-known IF functions such as linear, quadratic monomial, and cubic monomial IF functions. In addition, all nonlinear IF functions sufficiently approximated by a third order Taylor series over the unit time sequence can be represented in this space. Analog methods for generating polynomial IF waveforms are well established allowing for practical implementation in real world systems. By sufficiently constraining the search space to these waveforms of interest, alternative optimization methods such as differential evolution can be used to optimize tracking performance in a variety of radar environments. While simplified tracking models and finite waveform dictionaries have information theoretic results, continuous waveform design in high SNR, narrowband, cluttered environments is explored.
ContributorsPaul, Bryan (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Bliss, Daniel W (Thesis advisor) / Tepedelenlioğlu, Cihan (Committee member) / Arizona State University (Publisher)
Created2014
Description
In this thesis, an adaptive waveform selection technique for dynamic target tracking under low signal-to-noise ratio (SNR) conditions is investigated. The approach is integrated with a track-before-detect (TBD) algorithm and uses delay-Doppler matched filter (MF) outputs as raw measurements without setting any threshold for extracting delay-Doppler estimates. The particle filter (PF) Bayesian sequential estimation approach is used with the TBD algorithm (PF-TBD) to estimate the dynamic target state. A waveform-agile TBD technique is proposed that integrates the PF-TBD with a waveform selection technique. The new approach predicts the waveform to transmit at the next time step by minimizing the predicted mean-squared error (MSE). As a result, the radar parameters are adaptively and optimally selected for superior performance. Based on previous work, this thesis highlights the applicability of the predicted covariance matrix to the lower SNR waveform-agile tracking problem. The adaptive waveform selection algorithm's MSE performance was compared against fixed waveforms using Monte Carlo simulations. It was found that the adaptive approach performed at least as well as the best fixed waveform when focusing on estimating only position or only velocity. When these estimates were weighted by different amounts, then the adaptive performance exceeded all fixed waveforms. This improvement in performance demonstrates the utility of the predicted covariance in waveform design, at low SNR conditions that are poorly handled with more traditional tracking algorithms.
ContributorsPiwowarski, Ryan (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Kovvali, Narayan (Committee member) / Arizona State University (Publisher)
Created2011
Description
Composite materials are increasingly being used in aircraft, automobiles, and other applications due to their high strength to weight and stiffness to weight ratios. However, the presence of damage, such as delamination or matrix cracks, can significantly compromise the performance of these materials and result in premature failure. Structural components are often manually inspected to detect the presence of damage. This technique, known as schedule based maintenance, however, is expensive, time-consuming, and often limited to easily accessible structural elements. Therefore, there is an increased demand for robust and efficient Structural Health Monitoring (SHM) techniques that can be used for Condition Based Monitoring, which is the method in which structural components are inspected based upon damage metrics as opposed to flight hours. SHM relies on in situ frameworks for detecting early signs of damage in exposed and unexposed structural elements, offering not only reduced number of schedule based inspections, but also providing better useful life estimates. SHM frameworks require the development of different sensing technologies, algorithms, and procedures to detect, localize, quantify, characterize, as well as assess overall damage in aerospace structures so that strong estimations in the remaining useful life can be determined. The use of piezoelectric transducers along with guided Lamb waves is a method that has received considerable attention due to the weight, cost, and function of the systems based on these elements. The research in this thesis investigates the ability of Lamb waves to detect damage in feature dense anisotropic composite panels. Most current research negates the effects of experimental variability by performing tests on structurally simple isotropic plates that are used as a baseline and damaged specimen. However, in actual applications, variability cannot be negated, and therefore there is a need to research the effects of complex sample geometries, environmental operating conditions, and the effects of variability in material properties. This research is based on experiments conducted on a single blade-stiffened anisotropic composite panel that localizes delamination damage caused by impact. The overall goal was to utilize a correlative approach that used only the damage feature produced by the delamination as the damage index. This approach was adopted because it offered a simplistic way to determine the existence and location of damage without having to conduct a more complex wave propagation analysis or having to take into account the geometric complexities of the test specimen. Results showed that even in a complex structure, if the damage feature can be extracted and measured, then an appropriate damage index can be associated to it and the location of the damage can be inferred using a dense sensor array. The second experiment presented in this research studies the effects of temperature on damage detection when using one test specimen for a benchmark data set and another for damage data collection. This expands the previous experiment into exploring not only the effects of variable temperature, but also the effects of high experimental variability. Results from this work show that the damage feature in the data is not only extractable at higher temperatures, but that the data from one panel at one temperature can be directly compared to another panel at another temperature for baseline comparison due to linearity of the collected data.
ContributorsVizzini, Anthony James, II (Author) / Chattopadhyay, Aditi (Thesis advisor) / Fard, Masoud (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2012
Description
As the demand for wireless systems increases exponentially, it has become necessary
for different wireless modalities, like radar and communication systems, to share the
available bandwidth. One approach to realize coexistence successfully is for each
system to adopt a transmit waveform with a unique nonlinear time-varying phase
function. At the receiver of the system of interest, the waveform received for process-
ing may still suffer from low signal-to-interference-plus-noise ratio (SINR) due to the
presence of the waveforms that are matched to the other coexisting systems. This
thesis uses a time-frequency based approach to increase the SINR of a system by estimating the unique nonlinear instantaneous frequency (IF) of the waveform matched
to the system. Specifically, the IF is estimated using the synchrosqueezing transform,
a highly localized time-frequency representation that also enables reconstruction of
individual waveform components. As the IF estimate is biased, modified versions of
the transform are investigated to obtain estimators that are both unbiased and also
matched to the unique nonlinear phase function of a given waveform. Simulations
using transmit waveforms of coexisting wireless systems are provided to demonstrate
the performance of the proposed approach using both biased and unbiased IF estimators.
for different wireless modalities, like radar and communication systems, to share the
available bandwidth. One approach to realize coexistence successfully is for each
system to adopt a transmit waveform with a unique nonlinear time-varying phase
function. At the receiver of the system of interest, the waveform received for process-
ing may still suffer from low signal-to-interference-plus-noise ratio (SINR) due to the
presence of the waveforms that are matched to the other coexisting systems. This
thesis uses a time-frequency based approach to increase the SINR of a system by estimating the unique nonlinear instantaneous frequency (IF) of the waveform matched
to the system. Specifically, the IF is estimated using the synchrosqueezing transform,
a highly localized time-frequency representation that also enables reconstruction of
individual waveform components. As the IF estimate is biased, modified versions of
the transform are investigated to obtain estimators that are both unbiased and also
matched to the unique nonlinear phase function of a given waveform. Simulations
using transmit waveforms of coexisting wireless systems are provided to demonstrate
the performance of the proposed approach using both biased and unbiased IF estimators.
ContributorsGattani, Vineet Sunil (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Richmond, Christ (Committee member) / Maurer, Alexander (Committee member) / Arizona State University (Publisher)
Created2018
Description
As the demand for spectrum sharing between radar and communications systems is steadily increasing, the coexistence between the two systems is a growing and very challenging problem. Radar tracking in the presence of strong communications interference can result in low probability of detection even when sequential Monte Carlo
tracking methods such as the particle filter (PF) are used that better match the target kinematic model. In particular, the tracking performance can fluctuate as the power level of the communications interference can vary dynamically and unpredictably.
This work proposes to integrate the interacting multiple model (IMM) selection approach with the PF tracker to allow for dynamic variations in the power spectral density of the communications interference. The model switching allows for a necessary transition between different communications interference power spectral density (CI-PSD) values in order to reduce prediction errors. Simulations demonstrate the high performance of the integrated approach with as many as six dynamic CI-PSD value changes during the target track. For low signal-to-interference-plus-noise ratios, the derivation for estimating the high power levels of the communications interference is provided; the estimated power levels would be dynamically used in the IMM when integrated with a track-before-detect filter that is better matched to low SINR tracking applications.
tracking methods such as the particle filter (PF) are used that better match the target kinematic model. In particular, the tracking performance can fluctuate as the power level of the communications interference can vary dynamically and unpredictably.
This work proposes to integrate the interacting multiple model (IMM) selection approach with the PF tracker to allow for dynamic variations in the power spectral density of the communications interference. The model switching allows for a necessary transition between different communications interference power spectral density (CI-PSD) values in order to reduce prediction errors. Simulations demonstrate the high performance of the integrated approach with as many as six dynamic CI-PSD value changes during the target track. For low signal-to-interference-plus-noise ratios, the derivation for estimating the high power levels of the communications interference is provided; the estimated power levels would be dynamically used in the IMM when integrated with a track-before-detect filter that is better matched to low SINR tracking applications.
ContributorsZhou, Jian (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Kovvali, Narayan (Committee member) / Berisha, Visar (Committee member) / Arizona State University (Publisher)
Created2015
Description
The radar performance of detecting a target and estimating its parameters can deteriorate rapidly in the presence of high clutter. This is because radar measurements due to clutter returns can be falsely detected as if originating from the actual target. Various data association methods and multiple hypothesis filtering approaches have been considered to solve this problem. Such methods, however, can be computationally intensive for real time radar processing. This work proposes a new approach that is based on the unsupervised clustering of target and clutter detections before target tracking using particle filtering. In particular, Gaussian mixture modeling is first used to separate detections into two Gaussian distinct mixtures. Using eigenvector analysis, the eccentricity of the covariance matrices of the Gaussian mixtures are computed and compared to threshold values that are obtained a priori. The thresholding allows only target detections to be used for target tracking. Simulations demonstrate the performance of the new algorithm and compare it with using k-means for clustering instead of Gaussian mixture modeling.
ContributorsFreeman, Matthew Gregory (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Bliss, Daniel (Thesis advisor) / Chakrabarti, Chaitali (Committee member) / Arizona State University (Publisher)
Created2016
Description
This thesis covers the design, development and testing of two high-power radio frequency transmitters that operate in C-band and X-band (System-C/X). The operational bands of System-C/X are 3-6 GHz and 8-11 GHz, respectively. Each system is designed to produce a peak effective isotropic radiated power of at least 50 dBW. The transmitters use parabolic dish antennas with dual-linear polarization feeds that can be steered over a wide range of azimuths and elevations with a precision of a fraction of a degree. System-C/X's transmit waveforms are generated using software-defined radios. The software-defined radio software is lightweight and reconfigurable. New waveforms can be loaded into the system during operation and saved to an onboard database. The waveform agility of the two systems lends them to potential uses in a wide range of broadcasting applications, including radar and communications. The effective isotropic radiated power and beam patterns for System-C/X were measured during two field test events in July 2021 and January 2022. The performance of both systems was found to be within acceptable limits of their design specifications.
ContributorsGordon, Samuel (Author) / Bliss, Daniel (Thesis advisor) / Mauskopf, Philip (Thesis advisor) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2022
Description
Constant false alarm rate is one of the essential algorithms in a RADAR detection system. It allows the RADAR system to dynamically set thresholds based on the data power level to distinguish targets with interfering noise and clutters.
To have a better acknowledgment of constant false alarm rate approaches performance, three clutter models, Gamma, Weibull, and Log-normal, have been introduced to evaluate the detection's capability of each constant false alarm rate algorithm.
The order statistical constant false alarm rate approach outperforms other conventional constant false alarm rate methods, especially in clutter evolved environments. However, this method requires high power consumption due to repeat sorting.
In the automotive RADAR system, the computational complexity of algorithms is essential because this system is in real-time. Therefore, the algorithms must be fast and efficient to ensure low power consumption and processing time.
The reduced computational complexity implementations of cell-averaging and order statistic constant false alarm rate were explored. Their big O and processing time has been reduced.
To have a better acknowledgment of constant false alarm rate approaches performance, three clutter models, Gamma, Weibull, and Log-normal, have been introduced to evaluate the detection's capability of each constant false alarm rate algorithm.
The order statistical constant false alarm rate approach outperforms other conventional constant false alarm rate methods, especially in clutter evolved environments. However, this method requires high power consumption due to repeat sorting.
In the automotive RADAR system, the computational complexity of algorithms is essential because this system is in real-time. Therefore, the algorithms must be fast and efficient to ensure low power consumption and processing time.
The reduced computational complexity implementations of cell-averaging and order statistic constant false alarm rate were explored. Their big O and processing time has been reduced.
ContributorsChu, Huiwen (Author) / Bliss, Daniel W. (Thesis advisor) / Alkhateeb, Ahmed (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2020