Matching Items (289)
Filtering by
- All Subjects: Mechanical Engineering
- Genre: Masters Thesis
Description
The project is mainly aimed at detecting the gas flow rate in Biosensors and medical health applications by means of an acoustic method using whistle based device. Considering the challenges involved in maintaining particular flow rate and back pressure for detecting certain analytes in breath analysis the proposed system along with a cell phone provides a suitable way to maintain the flow rate without any additional battery driven device. To achieve this, a system-level approach is implemented which involves development of a closed end whistle which is placed inside a tightly fitted constant back pressure tube. By means of experimentation pressure vs. flowrate curve is initially obtained and used for the development of the particular whistle. Finally, by means of an FFT code in a cell phone the flow rate vs. frequency characteristic curve is obtained. When a person respires through the device a whistle sound is generated which is captured by the cellphone microphone and a FFT analysis is performed to determine the frequency and hence the flow rate from the characteristic curve. This approach can be used to detect flow rate as low as low as 1L/min. The concept has been applied for the first time in this work to the development and optimization of a breath analyzer.
ContributorsRavichandran, Balaje Dhanram (Author) / Forzani, Erica (Thesis advisor) / Xian, Xiaojun (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2012
Description
Formula 1 car front wings have evolved significantly over the last fifty years. Looking back at the past decade shows significant changes made due to rules and regulations by the Federation Internationale de l'Automobile and an increased understanding of aerodynamic concepts. There seems to be a trend where aerodynamic design concepts, previously seen in aviation, are being applied to Formula 1 front wings; this helps race teams increase downforce and reduce drag. This thesis analyzes these changes made over the past years and relates the material back to material that was learned by the aviation industry and attempts to synthesize conceptual Formula 1 front Wing designs using VORLAX, a vortex lattice panel method, used in the aviation industry. This insight would be beneficial for Formula 1 teams as there are budget and time restrictions applied to Computational Fluid Dynamic and wind tunnel testing, but panel methods are run in a matter of seconds as opposed to hours or days. So, if verified, preliminary designs can be rapidly tested to optimize the workflow and reduce the time required for Computational Fluid Dynamic and wind tunnel testing.
ContributorsRatnayake, Sajana Sathsara (Author) / Takahashi, Timothy T (Thesis advisor) / Perez, Ruben E (Committee member) / Kim, Jeonglae (Committee member) / Arizona State University (Publisher)
Created2023
Description
As the explorations beyond the Earth's boundaries continue to evolve, researchers and engineers strive to develop versatile technologies capable of adapting to unknown space conditions. For instance, the utilization of Screw-Propelled Vehicles (SPVs) and robotics that utilize helical screws propulsion to transverse planetary bodies is a growing area of interest. An example of such technology is the Extant Exobiology Life Surveyor (EELS), a snake-like robot currently developed by the NASA Jet Propulsion Laboratory (JPL) to explore the surface of Saturn’s moon, Enceladus. However, the utilization of such a mechanism requires a deep and thorough understanding of screw mobility in uncertain conditions. The main approach to exploring screw dynamics and optimal design involves the utilization of Discrete Element Method (DEM) simulations to assess interactions and behavior of screws when interacting with granular terrains. In this investigation, the Simplified Johnson-Kendall-Roberts (SJKR) model is implemented into the utilized simulation environment to account for cohesion effects similar to what is experienced on celestial bodies like Enceladus. The model is verified and validated through experimental and theoretical testing. Subsequently, the performance characteristics of screws are explored under varying parameters, such as thread depth, number of screw starts, and the material’s cohesion level. The study has examined significant relationships between the parameters under investigation and their influence on the screw performance.
ContributorsAbdelrahim, Mohammad (Author) / Marvi, Hamid (Thesis advisor) / Berman, Spring (Committee member) / Lee, Hyunglae (Committee member) / Arizona State University (Publisher)
Created2023
Description
Animals have always been a source of inspiration for real-life problems. The octopus is one such animal that has a lot of untapped potential. The octopus’s arm is without solid joints or bone structure and despite this it can achieve many complicated movements with virtually infinite degrees of freedom. This ability is made possible through the unique morphology of the arm. The octopus’s arm is divided into transverse, longitudinal, oblique, and circular muscle groups and each one has a unique muscle fiber orientation. The octopus’s arm is classified as a hydrostat because it maintains a constant volume while contracting with the help of its different muscle groups. These muscle groups allow elongation, shortening, bending, and twisting of the arm when they work in combination with each other. To confirm the role of transverse and longitudinal muscle groups, an electromyography (EMG) recording of these muscle groups was performed while an amputated arm of an Octopus bimaculoides was stimulated with an electrical signal to induce movement. Statistical analysis was performed on these results to confirm the roles of each muscle group quantitatively. Octopus arm morphology was previously assumed to be uniform along the arm. Through a magnetic resonance imaging (MRI) study at the proximal, middle, and distal sections of the arm this notion was disproven, and a new pattern was discovered. Drawing inspiration from this finding and previous octopus arm prototypes, 4 bio-inspired designs were conceived and tested in finite element analysis (FEA) simulations. Four tests in elongation, shortening, bending, and transverse-assisted bending movements were performed on all designs to compare each design’s performance. The findings in this study have applications in engineering and soft robotics fields for use cases such as, handling fragile objects, minimally invasive surgeries, difficult-to-access areas that require squeezing through small holes, and other novel cases.
ContributorsAhmadi, Salaheddin (Author) / Marvi, Hamidreza (Thesis advisor) / Fisher, Rebecca (Committee member) / Xu, Zhe (Committee member) / Arizona State University (Publisher)
Created2023
Quantum Mechanical Study of the Electronic Structure and Thermoelectric Properties of Heusler Alloys
Description
Heusler alloys were discovered in 1903, and materials with half-metallic characteristics have drawn more attention from researchers since the advances in semiconductor industry [1]. Heusler alloys have found application as spin-filters, tunnel junctions or giant magnetoresistance (GMR) devices in technological applications [1]. In this work, the electronic structures, phonon dispersion, thermal properties, and electrical conductivities of PdMnSn and six novel alloys (AuCrSn, AuMnGe, Au2MnSn, Cu2NiGe, Pd2NiGe and Pt2CoSn) along with their magnetic moments are studied using ab initio calculations to understand the roots of half-metallicity in these alloys of Heusler family. From the phonon dispersion, the thermodynamic stability of the alloys in their respective phases is assessed. Phonon modes were also used to further understand the electrical transport in the crystals of these seven alloys. This study evaluates the relationship between materials' electrical conductivity and minority-spin bandgap in the band structure, and it provides suggestions for selecting constituent elements when designing new half-metallic Heusler alloys of C1b and L21 structures.
ContributorsPatel, Deep (Author) / Zhuang, Houlong (Thesis advisor) / Solanki, Kiran (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2023
Description
Advancements in three-dimensional (3D) additive manufacturing techniques have opened up new possibilities for healthcare systems and the medical industry, allowing for the realization of concepts that were once confined to theoretical discussions. Among these groundbreaking research endeavors is the development of intricate magnetic structures that can be actuated through non-invasive methods, including electromagnetic and magnetic actuation. Magnetic actuation, in particular, offers the advantage of untethered operation. In this study, a photopolymerizable resin infused with Fe3O4 oxide nanoparticles is employed in the printing process using the micro-continuous liquid interface production technique. The objective is to optimize the manufacturing process to produce microstructures featuring smooth surfaces and reduced surface porosity, and enhanced flexibility and magnetic actuation. Various intricate structures are fabricated to validate the printing process's capabilities. Furthermore, the assessment of the flexibilty of these 3D-printed structures is conducted in the presence of an external magnetic field using a homemade bending test setup, allowing for a comprehensive characterization of these components. This research serves as a foundation for the future design and development of micro-robots using micro-continuous liquid interface production technique.
ContributorsJha, Ujjawal (Author) / Chen, Xiangfan (Thesis advisor) / Li, Xiangjia (Committee member) / Jin, Kailong (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2023
Description
Ethylene is one of the most widely used organic compounds worldwide with ever increasing demand. Almost all the industries currently producing ethylene globally use the method of steam cracking, which, though highly selective and cost effective, is energy intensive along with having a high carbon footprint. This study aims to analyze micro-scale partial oxidation of propane as a novel approach towards ethylene generation which is simpler, less energy consuming, operates at lower temperatures and causes minimum CO2 emission. The experimental study endeavors to maximize the ethylene production by investigating the effect of variables such as temperature, flow rate, equivalence ratio and reactor diameter. The micro-scale partial oxidation of propane is studied inside quartz tube reactors of 1 mm and 3 mm diameter at a temperature range of 800 to 900 oC, at varying flow rates of 10 to 100 sccm and equivalence ratios of 1 to 6. The study reveals ethylene yield has a strong dependence on all the above factors. However, the factors are not completely independent of each other. Adjusting certain factors and levels results in greater ethylene yields as high as 10%, but propane to ethylene conversion efficiency is approximately constant for most conditions. Low CO2 concentrations are also recorded for most of the factor and level combinations, indicating the potential to achieve lower CO2 yields compared to conventional approaches. The investigation indicates promise for application in the field of ethylene generation.
ContributorsMAHALKAR, PAWAN MUKUND (Author) / Milcarek, Ryan (Thesis advisor) / Kwon, Beomjin (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2023
Description
Integrating advanced materials with innovative manufacturing techniques has propelled the field of additive manufacturing into new frontiers. This study explores the rapid 3D printing of reduced graphene oxide/polymer composites using Micro-Continuous Liquid Interface Production (μCLIP), a cutting-edge technology known for its speed and precision. A printable ink is formulated with reduced graphene oxide for μCLIP-based 3D printing. The research focuses on optimizing μCLIP parameters to fabricate reduced graphene composites efficiently. The study encompasses material synthesis, ink formulation and explores the resulting material's structural and electrical properties. The marriage of graphene's unique attributes with the rapid prototyping capabilities of μCLIP opens new avenues for scalable and rapid production in applications such as energy storage, sensors, and lightweight structural components. This work contributes to the evolving landscape of advanced materials and additive manufacturing, offering insights into the synthesis, characterization, and potential applications of 3D printed reduced graphene oxide/polymercomposites.
ContributorsRavishankar, Chayaank Bangalore (Author) / Chen, Xiangfan (Thesis advisor) / Bhate, Dhruv (Committee member) / Azeredo, Bruno (Committee member) / Arizona State University (Publisher)
Created2024
Description
The measurement of the radiation and convection that the human body experiences are important for ensuring safety in extreme heat conditions. The radiation from the surroundings on the human body is most often measured using globe or cylindrical radiometers. The large errors stemming from differences in internal and exterior temperatures and indirect estimation of convection can be resolved by simultaneously using three cylindrical radiometers (1 cm diameter, 9 cm height) with varying surface properties and internal heating. With three surface balances, the three unknowns (heat transfer coefficient, shortwave, and longwave radiation) can be solved for directly. As compared to integral radiation measurement technique, however, the bottom mounting using a wooden-dowel of the three-cylinder radiometers resulted in underestimated the total absorbed radiation. This first part of this thesis focuses on reducing the size of the three-cylinder radiometers and an alternative mounting that resolves the prior issues. In particular, the heat transfer coefficient in laminar wind tunnel with wind speed of 0.25 to 5 m/s is measured for six polished, heated cylinders with diameter of 1 cm and height of 1.5 to 9 cm mounted using a wooden dowel. For cylinders with height of 6 cm and above, the heat transfer coefficients are independent of the height and agree with the Hilpert correlation for infinitely long cylinder. Subsequently, a side-mounting for heated 6 cm tall cylinder with top and bottom metallic caps is developed and tested within the wind tunnel. The heat transfer coefficient is shown to be independent of the flow-side mounting and in agreement with the Hilpert correlation.
The second part of this thesis explores feasibility of employing the three-cylinder concept to measuring all air-flow parameters relevant to human convection including mean wind speed, turbulence intensity and length scale. Heated cylinders with same surface properties but varying diameters are fabricated. Uniformity of their exterior temperature, which is fundamental to the three-cylinder anemometer concept, is tested during operation using infrared camera. To provide a lab-based method to measure convection from the cylinders in turbulent flow, several designs of turbulence-generating fractal grids are laser-cut and introduced into the wind tunnel.
ContributorsGupta, Mahima (Author) / Rykaczewski, Konrad (Thesis advisor) / Pathikonda, Gokul (Thesis advisor) / Middel, Ariane (Committee member) / Arizona State University (Publisher)
Created2024