Matching Items (4)
Filtering by

Clear all filters

150947-Thumbnail Image.png
Description
Understanding the temperature structure of protoplanetary disks (PPDs) is paramount to modeling disk evolution and future planet formation. PPDs around T Tauri stars have two primary heating sources, protostellar irradiation, which depends on the flaring of the disk, and accretional heating as viscous coupling between annuli dissipate energy. I have

Understanding the temperature structure of protoplanetary disks (PPDs) is paramount to modeling disk evolution and future planet formation. PPDs around T Tauri stars have two primary heating sources, protostellar irradiation, which depends on the flaring of the disk, and accretional heating as viscous coupling between annuli dissipate energy. I have written a "1.5-D" radiative transfer code to calculate disk temperatures assuming hydrostatic and radiative equilibrium. The model solves for the temperature at all locations simultaneously using Rybicki's method, converges rapidly at high optical depth, and retains full frequency dependence. The likely cause of accretional heating in PPDs is the magnetorotational instability (MRI), which acts where gas ionization is sufficiently high for gas to couple to the magnetic field. This will occur in surface layers of the disk, leaving the interior portions of the disk inactive ("dead zone"). I calculate temperatures in PPDs undergoing such "layered accretion." Since the accretional heating is concentrated far from the midplane, temperatures in the disk's interior are lower than in PPDs modeled with vertically uniform accretion. The method is used to study for the first time disks evolving via the magnetorotational instability, which operates primarily in surface layers. I find that temperatures in layered accretion disks do not significantly differ from those of "passive disks," where no accretional heating exists. Emergent spectra are insensitive to active layer thickness, making it difficult to observationally identify disks undergoing layered vs. uniform accretion. I also calculate the ionization chemistry in PPDs, using an ionization network including multiple charge states of dust grains. Combined with a criterion for the onset of the MRI, I calculate where the MRI can be initiated and the extent of dead zones in PPDs. After accounting for feedback between temperature and active layer thickness, I find the surface density of the actively accreting layers falls rapidly with distance from the protostar, leading to a net outward flow of mass from ~0.1 to 3 AU. The clearing out of the innermost zones is possibly consistent with the observed behavior of recently discovered "transition disks."
ContributorsLesniak, Michael V., III (Author) / Desch, Steven J. (Thesis advisor) / Scannapieco, Evan (Committee member) / Timmes, Francis (Committee member) / Starrfield, Sumner (Committee member) / Belitsky, Andrei (Committee member) / Arizona State University (Publisher)
Created2012
156627-Thumbnail Image.png
Description
The formation of the firsts stars some 100-300 Myr after the Big Bang marked the end of the cosmic darks ages and created the elemental building blocks of not only rocky planets but eventually us. Understanding their formation, lifetimes, and contributions to the evolution of our universe is one of

The formation of the firsts stars some 100-300 Myr after the Big Bang marked the end of the cosmic darks ages and created the elemental building blocks of not only rocky planets but eventually us. Understanding their formation, lifetimes, and contributions to the evolution of our universe is one of the current frontiers in astronomy and astrophysics.

In this work I present an improved model for following the formation of Pop III stars, their effects on early galaxy evolution, and how we might search for them. I make use of a new subgrid model of turbulent mixing to accurately follow the time scales required to mix supernova (SN) ejecta -- enriched with heavy elements -- into the pristine gas. I implement this model within a large-scale cosmological simulation and follow the fraction of gas with metallicity below a critical value marking the boundary between Pop III and metal enriched Population II (Pop II) star formation. I demonstrate that accounting for subgrid mixing results in a Pop III stars formation rate that is 2-3 times higher than standard models with the same physical resolution.

I also implement and track a new "Primordial metals" (PM) scalar that tracks the metals generated by Pop III SNe. These metals are taken up by second generation stars and likely result in a subclass of carbon-enhanced, metal-poor (CEMP) stars. By tracking both regular metals and PM, I can model, in post-processing, the elemental abundances of simulation stars. I find good agreement between observations of CEMP-no Milky Way halo stars and second generation stars within the simulation when assuming the first stars had a typical mass of 60 M☉, providing clues as to the Pop III initial mass function.
ContributorsSarmento, Richard John (Author) / Scannapieco, Evan (Thesis advisor) / Windhorst, Rogier (Committee member) / Young, Patrick (Committee member) / Timmes, Frank (Committee member) / Patience, Jennifer (Committee member) / Arizona State University (Publisher)
Created2018
155723-Thumbnail Image.png
Description
High-energy explosive phenomena, Gamma-Ray Bursts (GRBs) and Supernovae (SNe), provide unique laboratories to study extreme physics and potentially open up the new discovery window of Gravitational-wave astronomy.

Uncovering the intrinsic variability of GRBs constrains the size of the GRB emission region, and ejecta velocity, in turn provides hints on the

High-energy explosive phenomena, Gamma-Ray Bursts (GRBs) and Supernovae (SNe), provide unique laboratories to study extreme physics and potentially open up the new discovery window of Gravitational-wave astronomy.

Uncovering the intrinsic variability of GRBs constrains the size of the GRB emission region, and ejecta velocity, in turn provides hints on the nature of GRBs and their progenitors. We develop a novel method which ties together wavelet and structure-function analyses to measure, for the first time, the actual minimum variability timescale, Delta t_min, of GRB light curves. Implementing our technique to the largest sample of GRBs collected by Swift and Fermi instruments reveals that only less than 10% of GRBs exhibit evidence for variability on timescales below 2 ms. Investigation on various energy bands of the Gamma-ray Burst Monitor (GBM) onboard Fermi shows that the tightest constraints on progenitor radii derive from timescales obtained from the hardest energy channel of light curves (299--1000 keV). Our derivations for the minimum Lorentz factor, Gamma_min, and the minimum emission radius, R = 2c Gamma_min^2 Delta t_min / (1+z), find Gamma < 400 which imply typical emission radii R ~ 1 X 10^14 cm for long-duration GRBs and R ~ 3 X 10^13 cm for short-duration GRBs (sGRBs).

I present the Reionization and Transients InfraRed (RATIR) followup of LIGO/Virgo Gravitational-wave events especially for the G194575 trigger. I show that expanding our pipeline to search for either optical riZ or near-infrared YJH detections (3 or more bands)

should result in a false-alarm-rate ~1% (one candidate in the vast 100 deg^2 LIGO error region) and an efficiency ~90%.

I also present the results of a 5-year comprehensive SN search by the Palomar Transient Factory aimed to measure the SN rates in the local Luminous Infrared Galaxies. We find that the SN rate of the sample, 0.05 +/- 0.02 1/yr (per galaxy), is consistent with that expected from the theoretical prediction, 0.060 +/- 0.002 1/yr (per galaxy).
ContributorsGolkhou, Vahid Zachary (Author) / Butler, Nathaniel R. (Thesis advisor) / Bowman, Judd (Committee member) / Jansen, Rolf A (Committee member) / Patience, Jennifer (Committee member) / Scannapieco, Evan (Committee member) / Arizona State University (Publisher)
Created2017
187398-Thumbnail Image.png
Description
Millimeter astronomy unlocks a window to the earliest produced light in the universe, called the Cosmic Microwave Background (CMB). Through analysis of the CMB, overarching features about the universe's evolution and structure can be better understood. Modern millimeter-wave instruments are constantly seeking improvements to sensitivity in the effort

Millimeter astronomy unlocks a window to the earliest produced light in the universe, called the Cosmic Microwave Background (CMB). Through analysis of the CMB, overarching features about the universe's evolution and structure can be better understood. Modern millimeter-wave instruments are constantly seeking improvements to sensitivity in the effort to further constrain small CMB anisotropies in both temperature and polarization. As a result, detailed investigations into lesser-known processes of the universe are now becoming possible. Here I present work on the millimeter-wavelength analysis of z ≈ 1 quiescent galaxy samples, whose conspicuous quenching of star formation is likely the result of active galactic nuclei (AGN) accretion onto supermassive black holes. Such AGN feedback would heat up a galaxy's surrounding circumgalactic medium (CGM). Obscured by signal from cold dust, I isolate the thermal Sunyaev-Zel'dovich effect, a CMB temperature anisotropy produced by hot ionized gas, to measure the CGM's average thermal energy and differentiate between AGN accretion models. I find a median thermal energy that best corresponds with moderate to high levels of AGN feedback. In addition, the radial profile of cold dust associated with the galaxy samples appears to be consistent with large-scale clustering of the universe. In the endeavor of increasingly efficient millimeter-wave detectors, I also describe the design process for novel multichroic dual-polarization antennas. Paired with extended hemispherical lenslets, simulations of these superconducting antennas show the potential to match or exceed performance compared to similar designs already in use. A prototype detector array, with dual-bowtie and hybrid trapezoidal antennas coupled to microwave kinetic inductance detectors (MKIDs) has been made and is under preparation to be tested in the near future. Finally, I also present my contributions to the cryogenic readout design of the Ali CMB Polarization Telescope (AliCPT), a large-scale CMB telescope geared towards searching the Northern Hemisphere sky for a unique `B-mode' polarization expected to be produced by primordial gravitational waves. Cryogenic readout is responsible for successful interfacing between room temperature electronics and sensitive detectors operating on AliCPT's sub-Kelvin temperature focal plane. The development of millimeter-wave instruments and future endeavors show great potential for the overall scientific community.
ContributorsMeinke, Jeremy (Author) / Mauskopf, Philip (Thesis advisor) / Alarcon, Ricardo (Committee member) / Scannapieco, Evan (Committee member) / Trichopoulos, Georgios (Committee member) / Arizona State University (Publisher)
Created2023