Matching Items (9)
Filtering by
- All Subjects: Performance
- Creators: Rogers, Bradley
- Creators: Gardner, Joshua
- Status: Published
Description
Pre-collegiate clarinet instructors are often challenged to teach students both fundamental skills and repertoire with limited instructional time. Insufficient time may cause fundamental skills to be addressed at the expense of repertoire or repertoire study may limit time spent on fundamental development. This document provides a suggested repertoire list that categorizes pre-collegiate clarinet literature based on the fundamental skill addressed in each included piece. Teachers can select repertoire that allows students to concurrently refine a fundamental skill while preparing a piece for performance. Addressed fundamental topics include embouchure, expanding the range into the clarion and altissimo registers, articulation, breathing, intonation, finger technique, and musicality.
Clarinet method books and treatises were studied to determine which fundamental concepts to include and to find established teaching techniques recommended by pedagogues. Pre-collegiate clarinet instructors were surveyed to determine which pieces of clarinet repertoire were frequently studied in their private lesson curriculum and why, and if they used specific pieces in order to isolate a fundamental skill. Literature found in repertoire lists, repertoire books, on-line catalogs, and from the survey results was examined. Repertoire was selected for inclusion if it contained passages that were analogous to the established teaching strategies.
Clarinet method books and treatises were studied to determine which fundamental concepts to include and to find established teaching techniques recommended by pedagogues. Pre-collegiate clarinet instructors were surveyed to determine which pieces of clarinet repertoire were frequently studied in their private lesson curriculum and why, and if they used specific pieces in order to isolate a fundamental skill. Literature found in repertoire lists, repertoire books, on-line catalogs, and from the survey results was examined. Repertoire was selected for inclusion if it contained passages that were analogous to the established teaching strategies.
ContributorsAustermann, Kelly R (Author) / Spring, Robert (Committee member) / Gardner, Joshua (Committee member) / Holbrook, Amy (Committee member) / Russell, Timothy (Committee member) / Arizona State University (Publisher)
Created2014
Description
New works for the bass clarinet as a solo instrument are uncommon. In the interest of expanding the repertoire of the bass clarinet, three new works for bass clarinet were commissioned from three different composers, all with different instrumentations. The resulting works are Industrial Strength for bass clarinet and piano by Kenji Bunch; Dark Embers for two bass clarinets by Theresa Martin; and Shovelhead for bass clarinet and interactive electronics by Steven Snowden. Although all three works feature the bass clarinet, they are all very different and pose unique challenges to the performer. To accompany these pieces, and as an aid to future performers, a performance practice guide has been included with recommendations for individuals who wish to perform these works. Included in the guide are recommended fingerings, practice techniques, and possible adjustments to the bass clarinet parts designed in collaboration with the composers that make the works more technically accessible. Accompanying this guide are full scores of all three works, a recording of them performed by the author, and a chart that contains recommended altissimo fingerings.
ContributorsMiracle, Matthew (Author) / Spring, Robert (Thesis advisor) / Gardner, Joshua (Committee member) / Holbrook, Amy (Committee member) / Micklich, Albie (Committee member) / Rogers, Rodney (Committee member) / Arizona State University (Publisher)
Created2012
Characterization and analysis of long term field aged photovoltaic modules and encapsulant materials
Description
Photovoltaic (PV) module degradation is a well-known issue, however understanding the mechanistic pathways in which modules degrade is still a major task for the PV industry. In order to study the mechanisms responsible for PV module degradation, the effects of these degradation mechanisms must be quantitatively measured to determine the severity of each degradation mode. In this thesis multiple modules from three climate zones (Arizona, California and Colorado) were investigated for a single module glass/polymer construction (Siemens M55) to determine the degree to which they had degraded, and the main factors that contributed to that degradation. To explain the loss in power, various nondestructive and destructive techniques were used to indicate possible causes of loss in performance. This is a two-part thesis. Part 1 presents non-destructive test results and analysis and Part 2 presents destructive test results and analysis.
ContributorsChicca, Matthew (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Rogers, Bradley (Committee member) / Srinivasan, Devarajan (Committee member) / Arizona State University (Publisher)
Created2015
Description
Testing was conducted for a solar assisted water heater and conventional all electric water heater for the purpose of investigating the advantages of utilizing solar energy to heat up water. The testing conducted simulated a four person household living in the Phoenix, Arizona region. With sensors and a weather station, data was gathered and analyzed for the water heaters. Performance patterns were observed that correlated to ambient conditions and functionality of the solar assisted water heater. This helped better understand how the solar water heater functioned and how it may continue to function. The testing for the solar assisted water heater was replicated with the all-electric water heater. One to one analyzes was conducted for comparison. The efficiency and advantages were displayed by the solar assisted water heater having a 61% efficiency. Performance parameters were calculated for the solar assisted water heater and it showed how accurate certified standards are. The results showed 8% difference in performance, but differed in energy savings. This further displayed the effects of uncontrollable ambient conditions and the effects of different testing conditions.
ContributorsMartínez, Luis, active 1995 (Author) / Rajadas, John (Thesis advisor) / Kannan, Arunachala (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2016
Description
In the past 10 to 15 years, there has been a tremendous increase in the amount of photovoltaic (PV) modules being both manufactured and installed in the field. Power plants in the hundreds of megawatts are continuously being turned online as the world turns toward greener and sustainable energy. Due to this fact and to calculate LCOE (levelized cost of energy), it is understandably becoming more important to comprehend the behavior of these systems as a whole by calculating two key data: the rate at which modules are degrading in the field; the trend (linear or nonlinear) in which the degradation is occurring. As opposed to periodical in field intrusive current-voltage (I-V) measurements, non-intrusive measurements are preferable to obtain these two key data since owners do not want to lose money by turning their systems off, as well as safety and breach of installer warranty terms. In order to understand the degradation behavior of PV systems, there is a need for highly accurate performance modeling. In this thesis 39 commercial PV power plants from the hot-dry climate of Arizona are analyzed to develop an understanding on the rate and trend of degradation seen by crystalline silicon PV modules. A total of three degradation rates were calculated for each power plant based on three methods: Performance Ratio (PR), Performance Index (PI), and raw kilowatt-hour. These methods were validated from in field I-V measurements obtained by Arizona State University Photovoltaic Reliability Lab (ASU-PRL). With the use of highly accurate performance models, the generated degradation rates may be used by the system owners to claim a warranty from PV module manufactures or other responsible parties.
ContributorsRaupp, Christopher (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Srinivasan, Devarajan (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2016
Description
This is a two-part thesis:
Part 1 characterizes soiling losses using various techniques to understand the effect of soiling on photovoltaic modules. The higher the angle of incidence (AOI), the lower will be the photovoltaic (PV) module performance. Our research group has already reported the AOI investigation for cleaned modules of five different technologies with air/glass interface. However, the modules that are installed in the field would invariably develop a soil layer with varying thickness depending on the site condition, rainfall and tilt angle. The soiled module will have the air/soil/glass interface rather than air/glass interface. This study investigates the AOI variations on soiled modules of five different PV technologies. It is demonstrated that AOI effect is inversely proportional to the soil density. In other words, the power or current loss between clean and soiled modules would be much higher at a higher AOI than at a lower AOI leading to excessive energy production loss of soiled modules on cloudy days, early morning hours and late afternoon hours. Similarly, the spectral influence of soil on the performance of the module was investigated through reflectance and transmittance measurements. It was observed that the reflectance and transmittances losses vary linearly with soil density variation and the 600-700 nm band was identified as an ideal band for soil density measurements.
Part 2 of this thesis performs statistical risk analysis for a power plant through FMECA (Failure Mode, Effect, and Criticality Analysis) based on non-destructive field techniques and count data of the failure modes. Risk Priority Number is used for the grading guideline for criticality analysis. The analysis was done on a 19-year-old power plant in cold-dry climate to identify the most dominant failure and degradation modes. In addition, a comparison study was done on the current power plant (framed) along with another 18-year-old (frameless) from the same climate zone to understand the failure modes for cold-dry climatic condition.
Part 1 characterizes soiling losses using various techniques to understand the effect of soiling on photovoltaic modules. The higher the angle of incidence (AOI), the lower will be the photovoltaic (PV) module performance. Our research group has already reported the AOI investigation for cleaned modules of five different technologies with air/glass interface. However, the modules that are installed in the field would invariably develop a soil layer with varying thickness depending on the site condition, rainfall and tilt angle. The soiled module will have the air/soil/glass interface rather than air/glass interface. This study investigates the AOI variations on soiled modules of five different PV technologies. It is demonstrated that AOI effect is inversely proportional to the soil density. In other words, the power or current loss between clean and soiled modules would be much higher at a higher AOI than at a lower AOI leading to excessive energy production loss of soiled modules on cloudy days, early morning hours and late afternoon hours. Similarly, the spectral influence of soil on the performance of the module was investigated through reflectance and transmittance measurements. It was observed that the reflectance and transmittances losses vary linearly with soil density variation and the 600-700 nm band was identified as an ideal band for soil density measurements.
Part 2 of this thesis performs statistical risk analysis for a power plant through FMECA (Failure Mode, Effect, and Criticality Analysis) based on non-destructive field techniques and count data of the failure modes. Risk Priority Number is used for the grading guideline for criticality analysis. The analysis was done on a 19-year-old power plant in cold-dry climate to identify the most dominant failure and degradation modes. In addition, a comparison study was done on the current power plant (framed) along with another 18-year-old (frameless) from the same climate zone to understand the failure modes for cold-dry climatic condition.
ContributorsBoppana, Sravanthi (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Srinivasan, Devarajan (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2015
Description
The number of compositions that use electronics alongside the wind ensemble has gradually increased in the 21st century, yet these compositions are infrequently programmed past their premieres. Explanations include lack of access to necessary resources, unfamiliarity with the repertoire, and inexperience with the technology they require. While there are other barriers to performance, this document focuses on familiarizing the repertoire and providing foundational knowledge necessary to overcome inexperience.
As the number of technology-native composers, audience members, and performers continues to increase, electronics in the ensemble are likely to become more standard. Without knowledge of the technology electronics require, these works will remain inaccessible. Composers attempt to bridge the technological knowledge gap by providing technical instructions for individual pieces, but this does not help people recognize the broader concepts that make all of these works more accessible. This document guides ensemble directors and performers to an understanding of these base concepts by developing a grading system for technology difficulty, assessing pedagogical and performance issues, and providing an annotated list of works currently available for electronics and winds.
As the number of technology-native composers, audience members, and performers continues to increase, electronics in the ensemble are likely to become more standard. Without knowledge of the technology electronics require, these works will remain inaccessible. Composers attempt to bridge the technological knowledge gap by providing technical instructions for individual pieces, but this does not help people recognize the broader concepts that make all of these works more accessible. This document guides ensemble directors and performers to an understanding of these base concepts by developing a grading system for technology difficulty, assessing pedagogical and performance issues, and providing an annotated list of works currently available for electronics and winds.
ContributorsHubbard, Justin (Author) / Caslor, Jason (Thesis advisor) / Gardner, Joshua (Committee member) / Holbrook, Amy (Committee member) / Arizona State University (Publisher)
Created2020
Description
This is a two part thesis:
Part 1 of this thesis determines the most dominant failure modes of field aged photovoltaic (PV) modules using experimental data and statistical analysis, FMECA (Failure Mode, Effect, and Criticality Analysis). The failure and degradation modes of about 5900 crystalline-Si glass/polymer modules fielded for 6 to 16 years in three different photovoltaic (PV) power plants with different mounting systems under the hot-dry desert climate of Arizona are evaluated. A statistical reliability tool, FMECA that uses Risk Priority Number (RPN) is performed for each PV power plant to determine the dominant failure modes in the modules by means of ranking and prioritizing the modes. This study on PV power plants considers all the failure and degradation modes from both safety and performance perspectives, and thus, comes to the conclusion that solder bond fatigue/failure with/without gridline/metallization contact fatigue/failure is the most dominant failure mode for these module types in the hot-dry desert climate of Arizona.
Part 2 of this thesis determines the best method to compute degradation rates of PV modules. Three different PV systems were evaluated to compute degradation rates using four methods and they are: I-V measurement, metered kWh, performance ratio (PR) and performance index (PI). I-V method, being an ideal method for degradation rate computation, were compared to the results from other three methods. The median degradation rates computed from kWh method were within ±0.15% from I-V measured degradation rates (0.9-1.37 %/year of three models). Degradation rates from the PI method were within ±0.05% from the I-V measured rates for two systems but the calculated degradation rate was remarkably different (±1%) from the I-V method for the third system. The degradation rate from the PR method was within ±0.16% from the I-V measured rate for only one system but were remarkably different (±1%) from the I-V measured rate for the other two systems. Thus, it was concluded that metered raw kWh method is the best practical method, after I-V method and PI method (if ground mounted POA insolation and other weather data are available) for degradation computation as this method was found to be fairly accurate, easy, inexpensive, fast and convenient.
Part 1 of this thesis determines the most dominant failure modes of field aged photovoltaic (PV) modules using experimental data and statistical analysis, FMECA (Failure Mode, Effect, and Criticality Analysis). The failure and degradation modes of about 5900 crystalline-Si glass/polymer modules fielded for 6 to 16 years in three different photovoltaic (PV) power plants with different mounting systems under the hot-dry desert climate of Arizona are evaluated. A statistical reliability tool, FMECA that uses Risk Priority Number (RPN) is performed for each PV power plant to determine the dominant failure modes in the modules by means of ranking and prioritizing the modes. This study on PV power plants considers all the failure and degradation modes from both safety and performance perspectives, and thus, comes to the conclusion that solder bond fatigue/failure with/without gridline/metallization contact fatigue/failure is the most dominant failure mode for these module types in the hot-dry desert climate of Arizona.
Part 2 of this thesis determines the best method to compute degradation rates of PV modules. Three different PV systems were evaluated to compute degradation rates using four methods and they are: I-V measurement, metered kWh, performance ratio (PR) and performance index (PI). I-V method, being an ideal method for degradation rate computation, were compared to the results from other three methods. The median degradation rates computed from kWh method were within ±0.15% from I-V measured degradation rates (0.9-1.37 %/year of three models). Degradation rates from the PI method were within ±0.05% from the I-V measured rates for two systems but the calculated degradation rate was remarkably different (±1%) from the I-V method for the third system. The degradation rate from the PR method was within ±0.16% from the I-V measured rate for only one system but were remarkably different (±1%) from the I-V measured rate for the other two systems. Thus, it was concluded that metered raw kWh method is the best practical method, after I-V method and PI method (if ground mounted POA insolation and other weather data are available) for degradation computation as this method was found to be fairly accurate, easy, inexpensive, fast and convenient.
ContributorsShrestha, Sanjay (Author) / Tamizhmani, Govindsamy (Thesis advisor) / Srinivasan, Devrajan (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2014
Description
The original scope of this project was to have several conducting experiences and written records about the conductor’s experiences. Due to COVID-19, the focus of the paper has shifted to documenting the preparation, rehearsal, and performance "Recombobulation" (2016) by Theresa Martin. Using the templates found in the "Teaching Music Through Performance in Band" book series as a model, combined with the author’s personal narrative of their experience, this paper aims to serve as a resource for both people considering programming this piece of music as well as early career conductors who strive to improve their craft.
ContributorsStirm, Taylor Lynne (Author) / Caslor, Jason (Thesis director) / Spring, Robert (Committee member) / Gardner, Joshua (Committee member) / School of Music, Dance and Theatre (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-12